RAZR: Internet via 3G Option

Similar Questions

• 2009 time capsule cannot connect to the internet via a modem

  I had my 2009 Time Capsule or airport works very well with the modem from my ISP for years. I use the TC a hub wireless and backup. The upgrade of the modem: no problem. Over the weekend, there was a failure of the internet that has since been corrected for days. Since my TC failed to connect to the internet via the modem. I can get online via an ethernet cable from the modem to my two computers (one is a janky PC, the other bought a MacBook Pro in 2015), so I know it's not the modem.

  I turned off and reset the modem several times. I turned off and reset the TC, repeatedly. I've reconfigured the TC twice per the instructions found in other discussions here. I _may_ not having the latest version of the software installed, but this has never been a problem in the past. Reconfiguration will display a green light, but in the diagnosis of the airport, it shows that it has not Internet even when connected via the Ethernet cable to the modem to work. Icons wireless on my laptop an exclamation or a warning icon.

  The cable operator suggested that sometimes the router manufacturers 'close the ports' and must be reopened if the connection is down for awhile. It makes no sense to me, but I'm not very technical.

  Any thoughts? Thank you very much

  Renee

  What is the number and the model of the modem?

  There is a connection by Ethernet cable from the modem to time Capsule. The cable is connected to which port of the modem?  The cable is connected to which port on the Time Capsule?

  If you open AirPort Utility on your Mac... (Finder > Applications > utilities > AirPort Utility)... is displayed the image of the time Capsule?  If Yes, when you click on the image, a small window pops up with an edit box... or... an option for installation manual appears at the bottom of the window?

• How to set up Internet via BT?

  Hello

  I bought a SonyEricsson m600i and I try to have internet via bluetooth on my phone with an EP-2101\A1 (this comes with the driver Toshiba 3.00, I downloaded the driver 4.00 - for XP SP2).
  I dunno if anyone has the same configuration of phone battery AND bt...
  I tried almost all the parameters to make them connected, but I think that EP-2101 needs a NEW driver.
  Please take a look at this picture: I can make the COM connection, but I cannot establish a NETWORK connection (DISCONNECTED BT pictured!) among my things:

  http://Wolf.Miki.Hu/status.jpg

  Does anyone have an idea how to establish the NETWORK connection between my SE m600 and my BT EP2101\A1?

  Hello

  If the synchronization between your PC and the mobile phone is correctly, you must add your mobile phone as a new modem. This option you can find under phone and modem options > Modems tab, you can find it under control panel.

  After that, you create a new dial-up access and as modem choose your BT mobile phone. With a sufficient number, you will be able to establish the connection and use it for the Internet.

  I did it on this way for a long, long time. I hope that i didn't write something wrong. Please let me know if you have success!

  Good luck!!!

• I connect to the internet via the modem broadband datacard. After 2 minutes, the tab displays like this 'exception unknown software exception (0xc00000fd).

  Svchost.exe - application error

  I use windows xp professional edition. I connect to the internet via the modem broadband datacard. After 2 minutes, the tab displays like this
  "The exception unknown software exception (0xc00000fd) occurred in the application at location 0x5b8787ad.
  Click OK to terminate the program
  Click on CANCEL to debug the program.

  If I clicked on ok and cancel, it disconnects Internet. the message again after the computer restarts and the connection with the internet. and also the internet Explorer does not open I tried several times but it doesn't work. What can I do to slove this problem. Please help me.

  Hello

  ·          When the issue started?

  Step 1: Try to scan the computer using Antivirus software because this problem can occur if the computer is infected with the virus. You can use the Microsoft Security Analyzer by clicking on the link: http://www.microsoft.com/security/scanner/

  Note: once a virus is removed, you will need to reinstall some software, or restore lost information.

  Step 2: Check if the problem persists in Mode without failure.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

• Can not access internet via wireless HTTP 404

  I plugged a wireless (NetGear) adapter to my PC to be able to access the internet via the card my husband Verizon Wireless.  He says that I'm connected to the internet, but the only thing I get when I try to connect to any site is error 404 web page not found.  It's probably something simple, I need to set up on my desktop, but I can't find a way to solve this problem.

  Thank you... I actually got a response via Widgetbox.com yesterday.  I had to go to the workstation, Panel, network and Internet Options, Internet connections, connections and go to LAN settings and uncheck all checked it (the checked was something to do with a proxy server).  And that's all that it was him - everything has worked correctly!  Hope this helps someone else.

• How to connect my Windows 7 PC to Internet via Bluetooth on my Windows Mobile 6.1 phone?

  I have problems connecting to the Internet on my laptop under that Windows 7, Bluetooth, plugged in on my mobile phone running Windows Mobile 6.1.

  The phone is a Samsung Omnia GT-B7610 and can access the Internet via 3G.

  I can pair the phone with Windows 7 via Bluetooth without problem, but I cannot yet access the Internet on the PC.  The process I use is:

  -Pairing phone and your PC by selecting devices and printers > add a device, etc., etc.  The device is successfully added.
  -Network and Sharing Center > set up a new connection or network > connect to Internet > set up a new connection anyway > Dial-up.  It is supposed to be a Bluetooth option on this screen, but I did not.

  When I do this:
  Devices and printers > right click on the paired Bluetooth device > properties > Services tab, I see that Active Sync Bluetooth Service as the only service available.  Is this correct?

  In addition, I can't get Windows Mobile Device Center to connect/sync to the phone via Bluetooth.

  Any help is very appreciated!

  Hi Kiti, thanks for the reply.  I had just a little work there is, however I came across a program that makes it much easier: WMWifiRouter.  I highly recommend it!

• DirecTV DVR not seeing internet via router TC

  I installed a modem Arris SB6183 on Comcast xfinity network.  The modem is turned on and connected to the network, xfinity without problem.  All my other devices connected to the TC and could see the internet without problem.  (Though, as I write this I realize that they were all apple devices.)  However my Directv DVR (HR44-500) did not see the internet via the wireless or ethernet cable.  My TC is a 3 TB A1470.  The installer has been in DHCP + NAT.  I also tried to give Directv a (local) fixed IP which address found DVR, but still couldn't find the internet.  When I plugged the DVR directly to the SB6183, without going through the TC, he saw the internet seems to indicate a problem of TC.

  After a few days of futile efforts, I have reconnected the router xfinity and replace the TC in Bridge mode.  Everything is working now and the DVR sees the internet, but I'm still pay Comcast 10 $par month to rent their modem.

  Does anyone else have this problem?

  You need to clarify a few things.

  I would expect questions for Internet access to the DVR by the TC without doing manual port forwarding. The DVR itself must be connected to the internet as long as you have the correct values for IP etc. Although I suspect that ipv6 might complicate the situation.

  If the DVR awaits UPNP router compatible... the TC is a failure. Apple is not compatible UPNP, adopting instead their own port open NAT - PMP protocol which is limited to most of the time the Apple products.

  To get out, you need to return to the configuration without your xfinitiy router... and give us a stack of screenshot... To see the complete configuration of the RECORDER and the TC... screenshots are the best way to do it.

  DNS, in particular, can be a problem... so make sure you use Google public DNS on the DVR and see if that helps.

  Any other suggestions we really need to see all your settings...

  Some screenshots of a working Mac or iPad would also show the configuration of a unit of work... rather than the DVR has failed.

• Satellite C660D - error 651 attempts to connect to the internet via modem

  Hello

  I'm so stupid with this stuff so please make all responses for a 3 year old can understand.

  The problem - since a few years, I used a desktop computer and connected to the internet via modem wide empty tape and USB connection. Last week bought a Satellite C660D installed Windows 7 os provided and tried to connect with my modem, but failed miserably.

  I get the error message 651 but do not understand why.
  I use wired ethernet (because my friend does on their laptop) and tried the cable on their system, and it worked very well, so I don't think it's that.

  If someone is kind enough to explain what I do, I'll be able to keep this computer connected to the internet with usb and connect the laptop with an ethernet at the same time, so I can read the instructions while I go or I'll have to print the instructions and disconnect the Office before retrying the laptop? Yes, I'm dumb and I'm not even blonde, lol

  Thanks in advance for those who have the patience to try to help me.

  Hello

  Don t think that it s question computer laptop since many different users of the internet have reported the same error message with different but with pre-installed computers Win 7.

  There is no one-size-fits-all solution for this
  See this page:
  http://techietalkz.com/2009/10/29/error-651-in-Windows-7-a-killer-for-Internet-ConnectionVPN/

  There are several tricks to get this fixed an error
  For example: remove the Microsoft Virtual PC 2007 or disabling IPv6 for your connection.

  You will need to check the unique proposals would be interesting to know what will arrange in your case

• Unable to get internet via Wi - Fi

  I can't access the internet via my laptop. all other devices works fine (apple phone ipad tv etc.)

  I can connect with a cable directly to the wifi router and everything works. What could be the problem.

  Make sure that the wireless network adapter is correctly enabled. After that, check if your WIFI is detected by your laptop.

  If so, enter the key and everything should be OK.

  I don't know what model of laptop you have, but in the document of the user manuals, you can find info how you can enable/disable wireless network card.

• Satellite A60: Unable to connect to the internet via a modem - no dial-up

  In my Satellite A60, WinXP Home, when I try to connect to the Internet via the modem of Toshiba, I get error 6: handle not valid, and after a few attempts, I get error 50: all devices connected / request not supported.

  Device Manager / network / card Asynchronous RAS displays an error (black exclamation point on a yellow background).
  The driver is asyncmac.sys = MS Access Remote network serial driver.

  I have:
  -tried to uninstall the RAS asynchronous card, but no luck, didn't say it may be necessary to start
  -modem uninstalled / reinstalled
  -update of Windows XP through windows update
  -update of the bios / modem / network drivers from Toshiba

  No luck, the RAS asynchronous card error is still there.

  Any suggestion?
  Thank you
  Alessio - Italy

  I think that this problem is Windows XP and map Asynchronous RAS, not the modem.
  The modem correctly composed the number, negotiates the user and the password, and then I get error 6 and 50.
  On the internet I found this tip for uninstalling and reinstalling the RAS asynchronous card:
  http://forums.practicallynetworked.com/showthread.php?t=6781
  I followed the instructions and run RArepair.exe.
  It uninstalls and reinstalls the map Asynchronous RAS, but RAS is still in error (the yellow field in the Device Manager).

• Satellite A500-19W cannot be connected to the internet via WLan

  My computer got Win7 64-bit.
  We have 4 computers and all computers are connect to the internet via a modem.

  No one has never had a problem connecting to the internet until yesterday.
  They connect to the internet, but my computer does not connect.

  I encountered problems "problem with access point or wireless adapter.

  In summary, 3 computers are connecting to the internet, but my computer does not connect with the same modem.

  Please help me
  Thank you

  * I hope no errors in the English translation *.

  It is not easy to say what the problem is here, but try it please to toggle the device map local network once more. Use the FN + F8 key combination.
  Seeing WLAN on when you try to use internet?

  In my view, it cannot be a major problem. Be fair course of wireless network card is correctly activated. Also check in the Device Manager.

• Tecra A8 - unable to connect to the Internet via a cable

  Hello!

  I can't connect my laptop to the Internet via cable. The laptop does not recognize when I put the cable. Recognize only the wireless connection.

  Can someone tell me, what is the right software that I need to install in order to have cable internet?

  Hello

  Normally you n t need a software to connect to Internet or router. You should only check the TCP/IP settings. This means that if you have a router that supports DHCP default settings should be allowed, otherwise, you will need to set static IP addresses. It s based on your router configuration.

  What OS do you have right now?
  Is the OS installed Toshiba now or another OS?

  You can also try to update the network driver which can be downloaded from the Toshiba page.

• Unable to connect to the internet via ethernet.

  Unable to connect to the internet via ethernet.

  You have published a statement... is not an issue. You have a question?

  Do you mean that you try to use Ethernet for Internet connection? OR are you asking how to connect to Internet if Ethernet is not possible?

• Impossible to attach Windows 10 laptop computer to the Internet via cable USB iPhone 5 c after update to iTunes and iPhone (March 2016)

  System information:

  Tactile Lenovo Y50-70

  Construction of 10.0.10586 of Windows 10-10586

  iPhone 5 c - iOS 9.2.1

  iTunes - 12.3.2.35 / 64-bit

  Cell carrier: Etisalat AF

  Last year in Afghanistan, I have used my iPhone 5 c to attach my laptop to the internet simply by connecting via USB.  It has always worked.  Was very simple.  When I returned to the States for R & R in November 2015, I've updated my iPhone and iTunes to the latest versions and upgrades Windows 8.1 to Windows 10.

  I am now back in Afghanistan and USB tethering no longer works.  WiFi tethering works half the time.  The other half of the time, when I try and connect to the network of the iPhone, it is said, you cannot connect to this network.  When I can't connect to the phone, I disable the personal hotspot, WiFi and Bluetooth on the phone and then I turn it back on.  I also turn off my WiFi adapter on my laptop and turn it back on.  Which usually solves the problem and then I can connect via WiFi.

  Do some research on the internet, I read that there was a file corrupted when the current generation of iTunes, but Apple had set and you just need to reinstall the current version, which I did.  I have reinstalled iTunes by suggestions from different site.  After reinstalling iTunes and restart, I can always have my phone to connect to internet via the USB cable.

  I want to be able to connect my laptop to the internet using my phone via the USB cable.  I want it all works just as it did previously.  Connection via WiFi is a pain in the ass, because it does not work half the time and disconnects on a regular basis.

  Please tell us what should I do to solve this problem.

  Thank you.

  OK, I finally understand how to solve this problem.

  I was able to understand because of this post:

  https://discussions.Apple.com/message/29267225#29267225

  The problem is that Windows 10 was not install appropriate drivers for my iPhone.

  You can see 2 places to see.  We're in the control panel.  After you plug in your iPhone, the iPhone will be displayed and highlighted as not having is not a compatible driver.  The other place is in "Devices and printers", there you will see 3 apple devices: 1 Apple Mobile Device USB Driver, iPhone 2, and 3. Apple iPhone.  All three appear when I plugged in my iPhone.

  However, the problem was one that said iPhone really should have said "Apple Mobile Device Ethernet".

  So, how to fix this?

  Open devices and printers-> right click Iphone which should be under "Unscpecified"-> properties-> hardware-> Propterties tab-> change settings-> tab driver-> update driver-> Browse my computer for software Local-> Browse to the directory "C:\Program Files\Common Apple Mobile Device Support".

  Make sure you have the files box to include under verified.

  Who did.  Windows successfully installed the necessary drivers.  Now, I can easily connect to the internet via the USB cable again without any problems.

• Unable to connect to the Internet via my iPad "Personal Hotspot"

  Hello

  I am connected to the internet via my Personal Hotspot iPad2 connection and my laptop... works very well, as you can see... BUT when I do a search on my cinema system Sony Home the wifi hotspot does not yet show upward!

  How can I connect to my Personal Hotspot iPad2?

  Thank you

  Phill

  Hi Phill,

  A Hotspot is limited to a certain speed by the operators. Access point might not meet the requirements for streaming the video data on the Internet.

  So, the Home Theater system cannot be connected to the Hotspot.

  The Internet speed should be 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

  If my post answered your question, please mark it as an "accepted Solution".