RC-20200: Fatal: Unzip is not found

Hi all

EBS R12.2.4

OEL 6

I am cloning db level but it throws error:

Beginning database layer apply - kills 8 22:06:16 Sep 2015

/Home/oraprod/prod/11.2.0/appsutil/clone/bin/... /jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/home/oraprod/PROD/11.2.0/oui -classpath /home/oraprod/PROD/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/home/oraprod/PROD/11.2.0/appsutil/clone/jlib/ojdbc6.jar:/home/oraprod/PROD/11.2.0/appsutil/clone/jlib/java:/home/oraprod/PROD/11.2.0/appsutil/clone/jlib/oui/OraInstaller.jar:/home/oraprod/PROD/11.2.0/appsutil/clone/jlib/oui/ewt3.jar:/home/oraprod/PROD/11.2.0/appsutil/clone/jlib/oui/share.jar:/home/oraprod/PROD/11.2.0/appsutil/clone/jlib/ Oui/srvm.jar:/Home/oraprod/prod/11.2.0/appsutil/ Clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyDBTier EI /home/oraprod/PROD/11.2.0/appsutil/PROD_apps.xml-/home/oraprod/PROD/11.2.0/appsutil/clone - scene showProgress

Password APPS: log file located at /home/oraprod/PROD/11.2.0/appsutil/log/PROD_apps/ApplyDBTier_09082206.log

-0% complete RC-20200: Fatal: Unzip is not found. For now only native unzip - 5.2 6.0 are supported.

Please make sure you have unzip 5.2-6.0 in your path and try again...

ERROR when executing apply...

Kill 8 22:08:38 Sep 2015

ERROR: Cannot run /home/oraprod/PROD/11.2.0/appsutil/clone/bin/adclone.pl

I use oraprod for orauat users for UAT sid and sid PROD.

It's just my 2nd Clone which I changed UAT PROD sid. But the cloning of the UAT (from another machine) to UAT (for this machine) was a success.

Why PROD instance got on Unzip error, while the instance of the UAT was not serious? How can I check if Unzip is in the path?

Thank you very much

JC

As the owner of Oracle Home do as below

which unzip

echo $PATH

and thus run above the command again by user where cloning has succeeded.

find the difference. Add the path to decompress as follows.

PATH = $PATH:

export PATH

concerning

Pravin

Tags: Oracle Applications

Similar Questions

  • adcfgclone.pl dbTier fail with RC-20200: Fatal: Unzip is not found.

    Nice day

    I find this strange because I already applied patch 9874305 .

    Database has been recently improved 10.2.0.4 to 11.2.0.3 a machine of redhat5 successfully.

    I'm now trying to clone the database for a redhat 6.

    Any suggstions?

    ####################################

    NetServiceHandler 115.59 started for negril at Sun Aug 17 17:00:12 this 2014

    ===============================================================================

    [Background information]

    Host: negril

    Domain: pajhq.dom

    The Dir: /ora/oracle/proddb/11.2.0/appsutil/out/PROD_negril/08171700

    Level type: DATABASE LAYER

    Get the connection...

    ---------------------------------------------------------------

    ADX database utility

    ---------------------------------------------------------------

    getConnectionUsingAppsJDBCConnector()->

    APPS_JDBC_URL = "null".

    Try to get by using connection based SID connect descriptor

    getConnection()->

    sDbHost: negril

    sDbDomain: pajhq.dom

    sDbPort: 1521

    sDbSid: PROD

    sDbUser: apps

    Try to connect using SID...

    getConnectionUsingSID()->

    JDBC URL: jdbc:oracle:thin:@negril.pajhq.dom:1521:PROD

    Exception occurred: java.sql.SQLException: IO error: the network adapter could not establish the connection

    Try to connect using SID as ServiceName

    getConnectionUsingServiceName()->

    URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=negril.pajhq.dom)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=PROD)))

    Exception occurred: java.sql.SQLException: IO error: the network adapter could not establish the connection

    Try to connect using SID as ServiceName.DomainName

    getConnectionUsingServiceName()->

    URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=negril.pajhq.dom)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=PROD.pajhq.dom)))

    Exception occurred: java.sql.SQLException: IO error: the network adapter could not establish the connection

    Connection could not be obtained; return null

    Hello

    I had to manually configure the tnsnames.ora (nodename.domainname added), then start the listener. So ran

    Perl level appsuser db = adbldxml.pl = apps appspasswd = and managed to generate a good contextfile

    and restarted perl adcgclone dbTier to the estate.

    * I also had to copy adbcrdb.sh from the source due to the

    AC-00423: template file: /ora/oracle/proddb/11.2.0/appsutil/template/adcrdb.sh lack of file system.

    Asked by oracle.apps.ad.autoconfig.InstantiateFile

    Thank you

  • 20200 RC-error: Fatal: Unzip is not found. At the moment only decompress Native

    Hi all

    I install 12.1.1 in Oracle linux 6.1 server 64-bit, while starting rapidwiz error


    "RC-20200: Fatal: Unzip is not found." For the moment only decompress Native 5.X is supported.

    Please make sure you have unzip 5.X on your path and try again...

    Complete installation of the impossible database

    RW-50010: error:-script returned an error: 1
    RW-50004: Error Code when you run the external process

    I'm scattered for last day two, pleas help me to move forward.

    Thank you very much...

    Respect of
    GREG

    I install 12.1.1 in Oracle linux 6.1 server 64-bit, while starting rapidwiz error

    Your operating system is not certified with R12, so please install a certified - Installation of Oracle E-Business Suite and Notes version upgrade 12 (12.1.1) for Linux x 86-64 [761566.1 ID]

    Thank you
    Hussein

  • Error: "FATAL: oracleasm Module not found" in Red Hat 6

    Hi all:

    ... OS: Red Hat 6.5 (64-bit)

    I am preparing to install a 12 c CARS in a Red Hat 6.5. When you configure the ASMLib, I got the following error when executing "/ usr/sbin/oracleasm init:

    2 May 18:23:20 oraprd01 modprobe: FATAL: Module not found oracleasm.

    I configure YUM Oracle filing and the package installed the "kmod-oracleasm. And in the link (Oracle ASMLib downloads for Red Hat Enterprise Linux Server 6) I got the packages 'oracleasmlib' and 'oracleasm-support', as you can see below:

    [root@oraprd01 binarios] # rpm - qa | grep oracleasm-i

    kmod-oracleasm - 2.0.8 - 4.el6_6.x86_64

    oracleasm-support - 2.1.8 - 1.el6.x86_64

    oracleasmlib - 2.0.4 - 1.el6.x86_64

    My kernel is:

    2.6.32 - 431.el6.x86_64 oraprd01 Linux #1 SMP Sun Nov 10 22:19:54 IS 2013 x86_64 x86_64 x86_64 GNU/Linux

    My version of Red Hat is:

    [root@oraprd01 binarios] # cat/etc/redhat-release

    Release of Red Hat Enterprise Linux Server 6.5 (Santiago)

    Why am I the above error while trying the oracleasm module init? WHat am I hurt?


    Thanks in advance.

    Problem solved.

    I installed an earlier version of the kmod-oracleasm (kmod-oracleasm - 2.0.6.rh1 - 3.el6_5.x86_64) downloaded from the customer portal of Red Hat. Now the ASM is responsible.

  • Fatal error. Object was not found.

    Hello

    I built aninstaller package that includes:

    3 x .exe

    LabVIEW2009 Dev Environment

    VISA Runtime Environment

    NOR-DAQmx

    When I try to run the Setup program (from the local hard disk) I get the following error, any ideas anyone?

    At soon inadvance, Alec

    .\Distribution.cpp(320): IInstallerError 10002
    Fatal error. Object was not found.
    class CPart object lookup by ProductCode cannot find the object {9A832E3A-8676-41CC-A945-9C6827D00B4C}

    I was building the installer directly on a network drive. If you create the installer on site and then copy it to a network drive, it works fine.

  • computer does not start message "autochk.exe not found" followed of "stop: c000021a (fatal system error.

    computer does not start.

    the screen message is: "autochk.exe not found."

    second message is: "stop: c000021a (fatal system error)".

    «the session Manager initialization process ended unexpectedly with the State 0xc00003a (0x00000000 0x00000000).»

    "the system is stopped.

    Hi Bobzurcher,

    ·         Did you do changes on the computer before the show?

    I suggest you to consult the article in the Microsoft Knowledge Base and check.

     

    How to solve an error "STOP 0xC000021A.

    http://support.Microsoft.com/kb/156669

    Let us know if that helps.

  • How to fix a DirectX fatal error code 3 DXGI ERROR not FOUND?

    How to fix a DirectX fatal error code 3 DXGI ERROR not FOUND?

    for just cause 2
    Please answer me before Monday

    If DirectX is up to date - you have a Direct X 10 graphics card? Just Cause 2 does not work on Direct X 9 graphics cards (perhaps the only game so far that will not use DX9) or Windows XP.

    The game should have reinstalled Direct X as the game has been installed. There is a folder for Direct X in Just Cause 2
    installation folder in your steam apps folder / Common. You could try to run the DXSETUP.exe from there.

    You can also use Windows Live X Web install-
    Download details: DirectX end-user performance

    It is useful to always include as much detail as possible when you ask a question, including the specifications of your system (not a great long DX diag, just a list of the main components - processor,)
    graphics card and the amount of RAM is quite generally).

  • FATAL: Payload "Microsoft Visual C++ 2008 Redistributable Package (x 64) 9.0.0.60 {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9}' information not found in Media_db."

    I have this error after downloading the trial version
    I don't know him or just helped me


    Exit Code: 34 Please see specific errors below for troubleshooting. For example,  ERROR:   -------------------------------------- Summary --------------------------------------  - 1 fatal error(s), 0 error(s)    FATAL: Payload 'Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.0.60 {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9}' information not found in Media_db.  ------------------------------------------------------------------------------------- 

    Error 34 https://forums.adobe.com/thread/2019728

  • FATAL: Payload "Microsoft Visual C++ 2008 Redistributable Package (x 64) 9.0.0.23 {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9}' information not found in Media_db."

    Hello to all and all,.

    When I try to install any one software starting from creative cloud there is a problem!

    He told me that there is an error (34) and when I click on it his me me brought on her:

    "Exit code: 34

    Please see specific errors below for troubleshooting. For example, the ERROR:

    -------------------------------------- Summary --------------------------------------

    -fatal error 1, 0 error (s)

    FATAL: Payload "Microsoft Visual C++ 2008 Redistributable Package (x 64) 9.0.0.23 {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9}' information not found in Media_db."

    ------------------------------------------------------------------------------------- ''


    I'd like to solve this problem!

    Thank you for your answers!

    Hi Colin

    Please see following discussions where this subject has been discussed:

    Exit code: 34

    Y at - it an easy way to fix Exit Code 34 / Mac?

    How to fix Exit Code 34?

    Thank you

    Varun

  • FATAL: Information of "Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 9.0.0.23 {3B1D93C5-9024-4526-9BEE-B3554F2C90D6} ' not found in Media_db Payload

    I can't update to the CC 2015 because of this error

    FATAL: Information of "Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 9.0.0.23 {3B1D93C5-9024-4526-9BEE-B3554F2C90D6} ' not found in Media_db Payload

    Please tell me how I can solve this problem.

    Thank you

    Navigate to C:\Program Files (x 86) \Common Files\Adobe if you use the 32-bit system, I think it would be C:\Program Files\Common Files\Adobe

    Change the 3 folder names.

    Adobe PCD-> Adobe PCDold

    backup-> backupold

    Caps-> capsold

    Rerun the installation program

  • Fatal error: Class 'JRequest' not found in /.

    I just installed and updated Premium CS5. I'm a Joomla! Web designer and am looking forward to using LIVE VIEW. Every time I open a Joomla index.php file and connect to a server, I get this message: Fatal error: Class 'JRequest' not found in / (directory).

    I clicked on the link DISCOVER and still got the error. I searched "jrequest" in the forums and found nothing.

    You don't need to set the parameters of Live View. That is only necessary when you test pages requiring variables passed through the URL, or through the POST method.

    Implementation of Dreamweaver CS5 to work with a CMS such as WordPress, Drupal or Joomla!, is very easy. Dreamweaver manages a CMS in exactly in the same way as a browser. Everything happens through index.php. To do this, Dreamweaver needs to know two things:

    • The physical address of the root of the site.
    • The base URL that points to the same location.

    It is recommended to work to set up a local test environment, using XAMPP, Wamp, MAMP or a similar montage. I use Joomla!, but I set up a test installation to check for one of my books. The Joomla! files are located in C:\xampp\htdocs\joomla\. In the Site configuration dialog box, the test server uses the following parameters:

    • Connect using: Local/network
    • Folder on the server: C:\xampp\htdocs\joomla\
    • http://localhost/Joomla/
    • Advanced: PHP MySQL server model

    Because Joomla! discouraged use PHP code, you must also create a file .htaccess with the following content:

    php_value display_errors off
    

    If you use a remote installation as your test server, you must connect using FTP or SFTP. In the definition of the test server, enter the details of the FTP, you need to access the server.

    Since your Joomla! site is located in public_html, the value entered in the root directory must be all that your Web host tells you to go to the root of the site. In some cases, you can leave this field blank, because your login takes you there automatically. In other cases, you may need to enter/home/username/public_html.

    The value entered in Web URL is the base URL for your site. In the case of example.com, it would be http://www.example.com/.

    I have not tested a Cluster using a remote server, but I think you need to copy index.php in your local site folder. You open index.php in the Dreamweaver Document window, and then click Live View. Dreamweaver displays the site in Live View mode and connect to the test server. To navigate to other pages in the site, hold down the CTRL key when you click on the links.

    The mistake that many people make is to try to open a page directly in Dreamweaver. It does not work. You need navigate to the page in the same way as a browser. However, if you know the URL of a page, you can enter it directly in the field address bar of the browser in Dreamweaver.

  • Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

    Hi and help,

    searched the Web and found other discussions of the forum with similar questions.
    Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

    After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

    Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
    so select the power options... "could not start because the CpuPerf.dll is not running.
    Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

    Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
    In support of Toshiba and tried to install Power Saver... same problem will not install.

    Thus help help help if possible.
    Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

    Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

    any help please
    Tim

    Hello

    I think you can solve this problem, recover the laptop.
    But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

    It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
    Usually new installation of GST should help. But it was not and I m wondering why

    Maybe this is s question really an OS since system restore help (to the previous state) didn t

    He s strange question right now I can suggest only a new recovery

  • Device PCI C710TU Presario driver not found

    I recently formatted my Presario C710TU laptop and installed Windows XP Professional with Service Pack 3 and have had a bit of pain installed all the drivers... I have looked around the internet, the search, but was left speechless for days. Here are the details of the number:

    I have no sound at all and in device manager it is a lack of "PCI Device". I tried several drivers all with the result (not verbatim) "the MEDIA device is not found" which is most likely the wrong driver completely.

    My laptop did not come with any CD

    Here is a picture of Device Manager and other relevant information: http://i40.tinypic.com/iftlkg.jpg

    This is a text version of what is shown in the image:

    -Missing "PCI Device" - provider 8086 (Intel), 284 b, SUBSYS_30D9103C, REV_03 device, 3 & B1BFB68 & 0 & D8

    -Info-motherboard: 30 9 model

    -Chipset: Intel | GL960

    -The Intel Southbridge. 82801HBM (ICH8-ME)

    -Dxdiag: Notes show that no sound card cannot be found and that the drivers are needed.

    -Others: It has no volume icon in the bar that shows no audio device tasks.

    Here are a few drivers, I tried:

    sp32823 - Conexant High Definition Audio Driver 3.18.0.50

    sp36090 - Conextant CX20549-12 high definition audio driver

    sp34200

    sp33867 - Microsoft universal audio architecture bus driver for high definition audio

    That is all the information I can think to mention about the situation.

    Bandaids and free coffee did not yet make the laptop fix it's me, so it might be difficult, so thanks in advance for any help to find my cat lost... uh I mean fix my laptop...

    XP drivers for your model:

    Chipset here (first install it and reboot)

    Intel Matrix Storage Manager here

    Intel 965 graphics here

    Wireless Intel 3945 ABG here

    Realtek RTL8139C here

    MS-UAA for SP3 (required with a reboot before the Audio driver and Modem) here

    Conexant High Definition SmartAudio 221 here

    Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
    Not to communicate,
    Install from a list or specific location,
    Select don't search, I will choose the driver to install.
    For the hardware Type select 'show all devices '.
    Remove control "Show compatible hardware" and click on 'disk '.
    Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
    Ignore XP when it complains.
    Reset.

    Conexant HDAUDIO Soft Data Fax Modem with SmartCP Driver here

    .NET framework (required before HP Quick Launch Buttons) here

    HP Quick Launch buttons here

    USB mass storage device here

    Alps Touchpad here

  • nilsdev - nimdbgk Module not found

    Hello

    I just installed a PCI-6509 and NOR-DAQmx 8.0.2 on SUSE Linux. I intend to use the ANSI-C drivers in a C++ application. I have not installed LabVIEW.

    I started working my way the Configuration Guide, mainly to check that I had installed everything correctly and have reached the point where nilsdev is executed. On the surface, everything seems to install OK.

    When I run nilsdev I get the following error:

    FATAL: Module not found nimdbgk.

    Is how important it?

    Of course, it does not nimdbgk, but it doesn't look like it has been installed.

    In usr lsmod | grep or returns

    nipalk

    Nation

    lspci is the map of NOR (but he seems to have the wrong number on, not sure if it is a problem)

    05:01.0 class ff00: National Instruments devices 7085.

    Part of LabView nimdbgk is why I don't have it?

    All you have ideas?

    Thank you.

    Hello

    I am not that kind of information officially, but I would speculate that it would be in version 8.9.

    «NOR-DAQmx added support for 64-bit user mode in NOR-DAQmx 8.9 (ANSI C) and NOR-DAQmx 8.9.5 (ANSI C, LabVIEW 2009 and .NET Framework 3.5).» This now allows the development of 64-bit application on 64-bit operating systems during development for a 64 bit (ADE) Application development environment. »

    The outputs by the trend that has occurred with Windows basic drivers, what would be my best guess.

    There are a few forum posts that indicate that people have had DAQmx working on x 64 systems, but with the extension of the - m32 for compilations, this isn't really 64 bit.  Unfortunately, the positions are open and do not contain really any resolution as such.

    For example this or that.  I just searched "DAQmx Linux 64-bit".

    I hope it helps a bit.  I'm sorry that I don't have a definitive answer.

    Kind regards

  • "the 495 ordinal not found in the dynamic link library urlmon.dll" produces 10 times every reboot

    I am running MS Vista on my laptop. Recently when I start up I get the message "the 495 ordinal not found in the dynamic link library urlmon.dll" in a popup box and must cancel 10 times before I can move forward.

    I thought somehow it may relate to a recent update that has been accepted for Skype on my system.  So I uninstalled Skype.  Attempts to reinstall Skype have failed.  the installed app, but I cannot arrive at a login screen.  Instead of the normal Skype window, I have just the bottom of loading in a web browser.

    I found a similar one but transposed ordinal error discussed 459 in the KB and I tried following many of its steps (+ my results):

    "Method 1:

    To resolve this problem in Internet Explorer, follow these steps:

    a. Quit all programs that are running.

    b. Click Start and then click Run.

    c. type regsvr32 urlmon.dll, and then click OK.

    d. When you receive the message "DllRegisterServer in urlmon.dll succeeded," click OK.

    ('DllRegisterServer in urlmon.dll' received successful)

    If this does not resolve the issue, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the names of files below):

    ·         Shdocvw.dll (failed)

    ·         Actxprxy.dll (failed)

    ·         Oleaut32.dll (failed)

    ·         Mshtml.dll (received no response)

    ·         Browseui.dll (failed)

    ·         Shell32.dll (managed)

    Method (step 2):

    I suggest you to start in safe mode and test the question.

    Safe boot mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

    Method (step 3):

    I suggest you perform a SFC Scan and check if it helps.

    The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows: http://support.microsoft.com/kb/929833

    (SFC Scan completed successfully)

    Side note: when I started in Mode safe I immediately received an error "Microsoft Visual C++ Runtime library"Application request time to close in an unusual way"

    DavidMCandy suggested the user a list of the URLMON. Dll on the system.  I did as well.  See the file on my Onedrive to

    http://1drv.Ms/11PQ3dm

    I hope this will help you to find me a solution to my problem.

    First of all lets run a startup repair.

    This hardware test (and other things but we want to test the equipment). To do maintenance on the database and the files used by your two frequent falls (related to how windows manages system files including Windows Update). SFC is also linked to this, so we know that certain parts are working.

    After return from the logs generated.

    Startup Repair

    If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].

    In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.

    Select the Startup Repair tool.

    Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.

    To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.

    Select command prompt.

    Type

    type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more

     

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     
    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

Maybe you are looking for

  • Siri can not make phone calls

    After the passage of an iPhone 7 from an iPhone 6 via iTunes backup everything (well almost) works very well. However, Siri refuses to launch phone calls: 'sorry, I can't make your phone call. Each component seems to work separately: Contacts can be

  • What is the redemption for the ncaa 11 online code

    Why do you need to have a password to play online because not all now can buy this new game then why can't it's just be free?

  • How can I transfer OR-MAX configuration files during the installation of the application?

    I install my application on a PC that has no software EITHER.  The installation installs LV Run-Time and NO-DAQmx, OR MAX, but MAX configuration is the default value.  I use a USB DAQ.  I know that I can export the correct MAX configuration file but

  • Platform for Vista update

    I am trying to install Windows Live 2011 on Vista. I installed SP2 and the installer says I need to install the platform for Windows Update. I tried updates as suggested, but the download required KB971644 is not started. Is there another way to find

  • Drop-down list selection

    If someone has been able to successfully get the current selection in a drop-down list?  I have the drop-down list of channels and can change the selection in the Simulator. temp3 vartring = myDropDown.selectedItem.toString (); does not work. However