Re: after wireless driver update without connection

After the update of wireless (realtek_wlan_win7_20100427.zip) driver, my connection is lost. On the previous reset and it works again.

Update after Tempro message. The first download will not settle! The second installed OK. After reboot, the problem raised.
Bad driver?

Windows 7 64 bit

arnold12

Hello

If the wifi worked well before updating the driver, I recommend you to restore the driver. just to note, if everything works well, touch the system. I did not updated for the old drivers as can't find unnecessary.

Tags: Toshiba

Similar Questions

  • Boxes wireless printer work without connection to the modem HP 6700 printer

    My printer is located on the second floor of our House. It is connected to our network with the modem and the router to the first floor where my wife's computer. This connection works fine.

    My problem is that my printer only works if connected to my computer with a USB cable. This limits the use of a number of functions of the printer. Print the test pages that I myself say the printer is connected to the home network, but the printer will not work without the USB cable that turns off the Wireless function.

    Most of the instructions I've read show that I need to be connected to the modem downstairs to work. It is not possible that I can tell.

    Is there a way to fix this? or is a wireless connection to my printer not possible with this configuration?

    Thanks for your help

    Bill6700

    Bill,

    Welcome to the HP Forum.

    You don't mention what kind of computer of mystery that you have and try to use the printer.

    Assuming that the full feature software is available for the operating system of your computer, this may solve the problem - multiple computers can print once installed wireless printing software.  I hope that your computer is among the supported systems.

    General instructions to install the printer software

    Reminder:

    1. In most cases, the Solution Center has been replaced by the wizard of the printer.
    2. Shortcuts to the Printer Wizard must be installed on your desktop during the last part of the installation.

    Windows operating system:

    • Open drivers HP & downloads
    • Enter your printer model information
    • Select your printer in the list of the 'results '.

    OR

    • Enter your operating system the menu drop-down
    • Click NEXT and scroll down
    • Find the driver - product Installation software category
    • Select the driver of base, e-print, or full software functionality
    • Save the package *.exe Setup on your computer

    The files will probably save in the "folder"downloads. "

    Don't forget to search for updates as necessary for your installation. If available, you can download print and scan doctor and / or other programs of category - utilities.

    • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

    NOTES:

    • Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software!
    • Scroll through the list of videos back until you find the video that best fits your situation.
    • If you use a USB connection: download and install the driver software before connecting a USB cable.
    • Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router. Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.
    • Once the initial installation is complete and functional, check / install category - updated

    There is valuable information about the Web site, including your Manual, sections for Troubleshooting > How-to's, Troubleshooting > solving a problemand alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

    Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

    Click on accept as Solution when the answer is a good solution or workaround!

    Although I strive to reflect best practices of HP, I do not work for HP.

  • Pavilion x 360-13-s100nv: delete the folder after the driver update

    I just installed updates for my x 360-13-s100nv Pavilion nb.

    Well, during the process, the installation wizard retrieves the downloaded package (for example, sp71883.exe, sp71899.exe etc.) to a local folder. And then began the new installation/update driver.

    The question is, can I delete this folder after successful driver installation?

    As I saw that the folder contains subfolders with files of extracted packages, files etc. some newspapers.

    Yes.

    You can delete the folder after the installation of the driver.

  • CCC and AMD graphics card failed after the driver update

    I have a HP Pavilion dv6 laptop 6 c-32eg.

    I recently tried to update my GPU driver, as was necessary to run a particular program (oclHashcat, if you're interested). I downloaded the installer from hereand he ran. It looks good, but after the required reboot, the screen resolution has been set at 800 x 600, instead of the usual 1366 x 768. Then, I got an error message saying something in the sense of "your AMD driver could not be installed because you do not have the required equipment. In Device Manager the GPU was something like "usinig windows has stopped this device because it has reported an error."

    If I try to open the CCC, the program runs for several minutes, with a relatively high CPU usage in the Task Manager, then the message "' Catalyst Control Center: the host Application has stopped working". "

    I have now tried different ways to solve this problem, which none have worked. Try to download a driver on the AMD website did not work, because the site said that the pilot was not appropriate for a computer with switchable graphics.

    My laptop doesn't seem to be using the AMD GPU as you try to run games as a test done drip slowly and with a minimum resolution.

    My laptop has doubled (switchable CCC) graphics:

    -AMD Radeon HD 7690 M XT card, with a 8.882.2.3000 driver version and date 30/09/2011.

    -And Intel HD Graphics Family, with, apparently, the same driver version and date as shown above. I can't know exactly what kind of GPU Intel it is.

    I also tried to update the graphic driver Intel, to see if that would fix the problem at all, but it made it worse: the screen become very red and low resolution. I fixed that by returning to a point just before performed system restore. Unfortunately, I don't think to do this before initially updated drivers.

    So, my question is: how to I find the full use of two graphics cards?

    Here is a copy - paste of my information system:

    Spoiler (Highlight to read)

    The performance Information and tools
    More details on my computer
    Component Details subscore Base score processor Intel (r) Core i5 - 2450 M CPU @ 2.50 GHz 7.0 5.9 determined by subscore more low memory (RAM) 8.00 GB 7.5 graphics Intel(r) HD Graphics Family 6.6 5861 MB Total graphics games Graph available memory 6.6 main 298 GB HDD free (462 GB Total) 5.9 Windows 7 Home Premium

    System manufacturer Hewlett-Packard model HP Pavilion dv6 Notebook PC Total amount of memory 8.00 GB RAM type system 64-bit operating system number of processor cores 2 total storage of 1397 GB disk partition size or your hard drives (C 298 GB free (462 GB Total) disk partition (D 325 GB free (932 GB Total) disk partition (E free 1 GB (4 GB Total) Media Player (F CD/DVD adapter type chart display)))) chart Intel(r) HD Graphics Family total available graphics card dedicated 6373 MB memory 2560 MB memory dedicated system memory 0 MB Shared system memory 3813 MB Display adapter driver version 8.882.2.3000 monitor main resolution 1366 x 768 DirectX version DirectX 10
    Information on the performance and tools more details on my computerComponent details subscore Base score processor Intel Core i5 - 2450 M CPU @ 2.50 GHz 7.0 5.9 determined by subscore more low (RAM) 8.00 GB 7.5 graphics Intel(r) HD Graphics Family 6.6 graphics games 5861 MB Total graphics memory available memory 6.6 main 298 GB HDD free (462 GB Total) 5.9 Windows 7 Home PremiumSystem manufacturer Hewlett-Packard model HP Pavilion dv6 Notebook PC type system memory 8.00 total GB system RAM, 64-bit operating system number of processors cores 2 total storage of 1397 GB disk partition size or your hard drives (C 298 GB free (462 GB Total) disk partition (D 325 GB free (932 GB Total) disk partition (E free 1 GB (4 GB Total) Media Player (F CD/DVD graphics Intel(r) HD Graphics Family Total graphic card available 6373 MB memory dedicated graphic 2560 MB system memory)))) dedicated memory 0 MB shared system memory 3813 MB version 8.882.2.3000 type graphics card driver monitor main resolution 1366 x 768 DirectX version DirectX 10

    Hello

    There may be a 3rd option left that you can try for one more set to gpu driver updates, but I would first get your system to a State where the switchable graphics work correctly.

    Try restoring the system first.

    If this does not work, the driver package AMD (containing two gpu drivers) you need can be downloaded from HP on the following link.

    http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55092.exe

    In this case being able to find a game more set to driver updates, many people with your type of switchable graphics succeeded with the offers on the 3rd party site - I strongly recommend to read the Manual to get an understanding of how it works and why driver signature enforcement must be disabled in order to load these drivers.

    http://leshcatlabs.NET/

    Kind regards

    DP - K

  • Satellite P300 - after Intel WLAN driver update cannot connect to the WLAN N

    After 4 months I have updated the driver for the WLAN. After installing the driver I m unable to connect to a network of N. recovery software but is not be able to connect to the network.
    I have already installed the Intel driver but nothing help.
    Are there some people who can help me solve this problem?

    I have a Satellite P300.

    Hello

    Firstly, it must ensure that your wireless network card and your WLan router would support the Draft N.

    Second, you should check if the project has been selected in the WLan card properties.
    This, to check the Device Manager-> properties-> Advanced tab WLan card

    Check it out

  • After the HP update cannot connect to the Internet using my ISP wireless

    I have a HP Pavillion15 Notebook PC, Prod #: E7C83AV using Windows 8. Hp yesterday made an update, and subsequently, my computer does not connect to the Internet, using the same network wireless ISP.  Only way I can get Internet is to use the DSL unit to the computer USB cord.  I had a "Configuration for Invalid IP (106)"

    My ISP is still in my system with the same password, and I can't find any reason why it does not connect.  I have all the correct lights on my computer & the DSL unit.  I have not contacted my ISP, do not know what to say "After HP did an update, your service will not work?"

    Tonight I tried to get help from HP, big whoopie, even when I'm in warranty for 9 months, I was transferred to HP/SmartFriends, who told me that I had to pay for the assistance.  It won't happen!

    I don't know what to do now, I'm not very computer savvy and if HP won't help, do not know where to turn now.

    I'm fighting mad now!

    Someone please help.

    Have you tried to restore to previous work image?

  • Controller Ethernet Driver, can't update without connection (number of HP Pavilion CNF6442WFL)

    Hello I have a HP Pavilion I don't know the exact model but I know that the number is CNF6442WFL the current operating system, I installed is a 64-bit windows XP Home Edition, this question arrases when I formatted my drive linux mint, I had and I used up to approximately 64 GB of my 98 GB drive and thought he would be faster since I had nothing I had to keep on what I didn't return until then after formatting, installing windows XP. the only error I could find said "the drivers for this device are not installed [code 28]" to reinstall the drivers for this device, click reinstall drivers "so I clicked it, but since theres no internet I can not reinstall it..."

    Much better. The number you posted earlier led to desktop machines. You are the cto Dv9000T. drivers XP are displayed. Most of the time you need HP Wireless Assistant installed and used to activate the adapter wireless before Intel driver will install.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3224058

  • How to automatically restore the session after a crash/update / without asking me if I want to restore it?

    Hello, there are times that my Firefox crashes (well, it happens to all of us who use it to some extent) or updates asking to restart. I would like to know if there is an option that allows you to restore the previous session automatically without asking me even. It would be very useful for reasons. I had this kind of problem a couple of times ending me be upset. Sometimes I misclicked and lost all my important tabs. Other times my firefox has crashed/shifted on after reboot and guess what sound restart still has not even asking me if I wanted to restore my session crashed.

    Thank you in advance.

    Cesarius Hi, I think I understand, but I have not explained completely.

    The browser.sessionstore.max_resumed_crashes preference is to avoid an infinite loop. The default value 1 means an attempt to restore the session automatically once and if it fails (for example, it crashes before it can finish to restore), then display the "embarrassing". You could try to increase the value of 2 or 3 and see if it works on the second or third time. If you still see the screen "This is awkward" after a crash, Firefox still does not make a failback.

    You can also check if there is a file user.js in your profile folder. A user.js file is a file of optional parameters that Firefox reads at startup and uses to override the settings saved in your previous session. Unless you create a user.js file yourself, you can usually just remove it. This article includes a section on the hunt for a possible user.js file: How to fix preferences that will not save.

    Note: by default, Windows hides the .js file extension. Precise work with file names, I suggest setting windows to show all file extensions. This article has the steps: https://www.mozilla.org/firefox/all/

  • Re: Satellite A300-1LT - after display driver update, I get an error message

    Hi all,

    I have A300-1LT PSAGCE and a update my toshiba Download Center display driver.

    ATI
    Type display driver
    Mobility Radeon HD 46xx/45xx/43xx subtype
    Size (KB) 108950
    Version 8.611
    Model Satellite L550, Satellite L500, Satellite A300, Satellite Pro A300
    Operating system Windows Vista 32-Bit

    When I reboot laptop computer error showed:

    "The Catalyst Control Center is not supported by the version of the driver for your graphics to enable. If you please update your ATI graphics driver or enable your ATI card using the display manager. »

    Cannot find Manager displayer have only man of color. What should I do?

    Help, please!

    Thnx

    Hello!

    Well, for me it looks like you didn't uninstall the old display driver software. Before installing a newer version, you still need to delete the old version. So go in Control Panel > software. Select ATI display driver software and remove it. After restarting the laptop, you must clean the Windows system using CCleaner (Google is your friend to find it). Restart again and after that, you can install the latest version of page of Toshiba.

    I hope this works.
    Moreover, what graphics card do you have?

    Good bye

  • Wireless driver updates?

    I have windows XP and and old HP bussiness / or mobile proffessional. I would like to update my driver wireless adapter to provide maybe more performance, but do not know how to do it. I have a correction of a problem with my router and not enough funds to change that, so I want to do what they were saying to the pcmag.com. I tried to do what said article in pcmag.com because they were told to go to "Network settings", but this was not the right direction. I went to 'Add Remove Programs' and can see "adapter LAN Broadcom 802.11, version 4.170.25.

    So can I get some more beach or absolute performance to date and how do I do it. How do you know that one to download etc.

    I was looking also at this address on this site: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-38773-1

    Hello:

    You can download the driver where you want, double-click it, and run it. The installation should be automatic.

    You don't need to disconnect from the internet or to do anything else but to run the driver.

    The link you posted is the same driver I posted, then Yes, it is the one you need.

  • No sound after audio driver update

    sounds on my pc

    Hello, after installing a driver realtek hd audio (new)

    I couldn't hear anything on my pc, I used wht I have seen that a windows audio driver need help thank you

    Try to roll back the driver to the one who used to work as follows: http://www.howtogeek.com/howto/windows-vista/roll-back-troublesome-device-drivers-in-windows-vista/.

    Then go to the manufactuerer of computer or the manufacturer of your audio device (if it came with the computer) ane search for updated drivers and be ABSOLUTELY sure that they are those of your audio device, AND they are compatible with your verision of Vista.  Then you can try to install these updates to see if they work.  If the same problem occur, then for some reason, these drivers do not work with your system and rollback again the one who worked and that you shouldn't use them.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Cannot adjust the brightness after display driver update on Satellite L855-118

    Hello.

    I just bought a SATELLITE L855-118, with ATI graphics card today, it was between this and another of them, but I know that you have problems updating graphics drivers on a portable Sony.

    I did a restore point.

    So I uninstalled the ATI catalyst graphics card and then did a sweeper driver and rebooted and then installed catalyst 12.6, installed fine, but my screen went to the maximum brightness and I can't adjust, BRIGHTNESS osd is displayed but the brightness of the screen does not change.

    So I used my restore point.

    This time I crushed the catalyst 8.9 with 12.6 stock, still cannot adjust the brightness.

    Someone knows how to solve this problem.

    My spec full in the link below.

    Satellite L855-118 - product specifications - Toshiba

    Thank you

    John.

    You mean that you can not use the Fn or Fn + F6, F7 button combination?
    Do other combination works properly?

    Also check this doc:
    http://APS2.toshiba-tro.de/KB0/TSB11033A0000R01.htm

    There is a brightness.zip that installs the additional registry key

  • After display driver update of my Satellite P100 (PSPA6A) is very HOT

    Hello

    I've updated the here screen reader

    http://www.nvidia.com/object/winxp_notebook_175.32_whql.html
    and my graphics card is a GeForce Go 7900 GS, but now the computer are very very very hot in the bottom/left keyboard...

    Can you tell if I have this correct update?

    Thank you

    Hello!

    Why you want to use a different driver which is not Toshiba? You have problems?

    As Akuma said, always use the driver from Toshiba.
    Here you can download:
    http://www.ISD.Toshiba.com.au-Online Support-Online Download Center-Online laptop-online-online Satellite Satellite series P-online Satellite P100 PSPA6A

    On this page you can also find the BIOS updates.

    Good bye

  • Xperia SP C5303 after 4.3 update cannot connect to the proxy server where I have no proxy

    I did the upgrade and now I can't use all the google apps, more a few others and the message is that I am unable to connect to the proxy server where I have no proxy server. I have just a modem normal wifi Adsl.
    It happens also in 3G. I can't download new internet settings if it is of no use.
    Any suggestions? I'm not a guru of Android so please try to help?
    Apps not working not are Facebook, YouTube, Twitter, Chrome, cards, play store.

    I found the solution. Start the PC COMPANION and find REPAIR that will install the UPDATE again (just follow the instructions) I hope that this time will be better. Worked for me and now mobile is allowed. A factory reset only I believe.

  • printing constantly number of copies after the driver update

    Hi HP

    HP Laserjet 1022n printer. Printing via LAN.

    Observed on two home computers da: Windows 7 32 bit. Windows Vista 32 bit. Windows fully updated by 2013 01/16.

    I let my updated driver via the optional push in Windows Update recently. (2nd week of January 2013)

    Now my printer print an unlimited number of copies, even if only one copy is selected. Exact same behavior on both aforementioned computers. When you look in the print queue in order to stop the waste of paper by cancelling the work, writing project flashes as if the continuous work return it yourself or something.

    Help, please!

    I can't always find the previous version of driver anywhere as it worked flawless.

    Kind regards

    Søren

    I've disabled 'bidirectional support' in the properties-> Ports and the problem seems to be resolved

Maybe you are looking for