Re: AT200 - gps receiver stopped working

Similar Questions

• GPS suddenly stopped working on iPhone 4S

  Hello

  Suddenly, the GPS on my iPhone 4 works a few weeks ago. At first I thought it was the app, but I noticed that is not work in other applications too, so I think it is necessary with the GPS on the phone itself. I did not change anything to cause the problem, it happened by itself.

  In troubleshooting, I have reset the GPS repeatedly following the instructions found on Google. I downloaded an application called State of the GPS and at first use, it showed that I had a few signals, however, it was a cloudy day, so I was not too concerned. I thought that the reset had solved the problem.

  No... so one day completely clear, I had "Bad difficulty" on GPS and GPS status while it is on the slopes of Ski or Argus application.

  I have reset the GPS again. Still no joy.

  I've updated the OS 9.2.1 reset and re-callibrated GPS doing the figure 8 sweep as suggest on Google with the airplane off the coast Mode. I still have some difficulty on the State of the GPS, no GPS on the Ski slopes and Google Maps doesn't have a clue where I am. Of course, on location services great for these applications.

  Are there other solutions?

  Thank you very much

  Rosaroo

  Hello Ros,

  If the GPS on your iPhone does not work properly, first try the following troubleshooting steps for location services.  If these steps do not resolve your problem, you may need to update the iOS software.  Don't forget to backup your iPhone before you make changes to it.

  Help with maps on your iPhone, iPad or iPod touch

  1. Tap Settings > privacy > location Services and to make, of course, this location Services and cards are turned on.
  2. Make sure that you set the date, time and timezone correctly on your device. Go to settings > general > Date & time. If possible, use the value automatically.
  3. Restart your device.
  4. Make sure that the cellular data or Wi - Fi is enabled.
  5. Try another location or switch to another Wi - Fi network.

  Services Locator uses GPS, Bluetooth and Wi - Fi hotspot and cell tower crowd source places to determine your position. Learn more about The location Services on your iOS device.

  Privacy and location for iOS Services 8 and iOS 9

  Enable or disable location Services

  You can enable or disable location Services in settings > privacy > location Services. You can enable location-based Services during the wizard process of installation or later through the creation of location-based Services. You can individually control applications and system services have access to the data of location Services. When location Services are disabled, the apps can't use your position in the foreground or background. You will thus limit the performance of various Apple and third-party applications.

  Settings > privacy > location Services.

  

  Settings > privacy > location Services > System Services.

  

  Reset or disable location Services

  Location warnings are applications that make the apps (for example, Camera, compass and maps so that location-based applications) to use the Services of location with these applications. An application will ask you to leave the first time, he needs to access the data of location Services. Allow tapping will give this app permission to use location Services according to your needs. Tapping can not prevent an application to access the data of location Services. Apps don't use your location until they asked permission and you grant permission.

  

  If you want to reset all settings to factory default location, go to settings > general > reset and tap reset card and privacy. When your location and privacy settings are reset, apps will be stop using your location until you grant them permission.

  Improve the accuracy of GPS

  GPS accuracy varies according to the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. Follow these tips to improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
    Important: Incorrect settings on your computer can sync to your device. Check the date, time and time zone on a computer that syncs with your device.
  • Restart your device.
  • Make sure you have a cell phone or Wi - Fi network connection. This allows assisted GPS (A - GPS) on the device to locate the fastest visible GPS satellites, in addition to providing information about the initial location using Wi - Fi or cellular networks.
    Microcells (sometimes called Femtocells) are not supported with location Services.
  • Keep a clear view of the horizon in several directions. Please keep in mind that walls, vehicle roofs, tall buildings, mountains and other obstacles can block the line of sight to GPS satellites. When this occurs, your device will automatically use a Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  Put your device in recovery mode and set it up again

  Put your device in recovery mode and set it up again

  1. Connect your device to your computer and open iTunes. If you don't have a computer, borrow one from a friend or go to an Apple Store or service provider authorized Apple for help.
  2. When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo. Keep until you see the screen in recovery mode now.

     

  3. When you see the option restore or update, Choose update. iTunes will try to reinstall iOS without erasing your data. Please wait while iTunes downloaded the software for your device.

  
  If the download takes more than 15 minutes the device out of recovery mode, you must repeat these steps and choose restore instead of update when you return to this step.

  

  ​

• After the update or restore is complete, configure your device. If you have backed up your device with iTunes or iCloud and you need to restore your device in step 3, you may be able to restore from your backup during installation.

Take care

• receive a problem caused windows to stop working, will notify you if a solution is found. Display driver igfx has stopped.

  the computer, ups and stops working...

  on a number of occasions, I get a blue screen with a print so small, that I can't read. Receive message a problem caused windows to stop working, will advise if a solution is found. Display messages to receive driver igfx has stopped working.

  You should look at the web site of the manufacturer of your video card or monitor to see if they have updated drivers.

• Continue to receive the Error Message: "SystemK Module has stopped working".

  Update Google Earth yesterday.  Since then, received message: "SystemK Module has stopped working".  Any ideas on how to get rid of this message?  Thank you, Janet

  

  I solved the problem myself.  He returned to an update to Google Earth.  Another search engine has been installed (I tried to abort)... that's what has caused this problem.  Once I deleted all the files from search engines and (Yes, yet another program associate (!), the problem solved).

  Thank you.

• By updating the Garmin GPS, I get the error "Bootstrapper.exe has stopped working".

  Bootstrapper.exe has stopped working!

  Hello!  I try to update my Garmin GPS and have saved the program on my desktop.  When I open it, the program retrieves and then I get the message: "Bootstrapper.exe has stopped working".

  I searched the internet and forums of Microsoft for answers, but I don't know why this is happening.  I followed an instruction in the forum by changing the setting of the DEP to just windows and programs and do not apply to ALL.  I restarted my computer and I tried to rerun the Garmin update.  I got the message again.  Y at - it somewhere on Microsoft where you can download just the ' Bootstrapper.exe by itself?

  All the updates of Windows and Microsoft are up to date.  I am running Windows Vista Home Premium, 32 bit, pack svc 1 & 2.  Could someone help me please?  I'm pretty knowledgeable with computers, but it frustrated me no end.

  Thanking you in advance,

  stillcrazyat49

  Hello
  
  1. have you made changes to the computer recently?
  2. the program is already running while update you?
  3. where did you download this update?
   
   
  Method 1.
  I ask you to re - download the update and then try to install it. Its possible this bootstrapper is damaged. If the problem persists, then put the computer in a clean boot state, and then try to update.
  May be a third party application is causing the conflict.
  
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  
  Method 2.
  If the problem persists, it is recommended to contact Garmin support and check.
  http://www.Garmin.com/Garmin/CMS/site/us/support/
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "Windows Media Center Receiver service stopped working and was closed" - Windows Vista Home Premium SP2

  Several times, I get the error message "Receiver Service Windows Media Center has stopped working and was closed".  Windows then search a problem and suggests that I run the update.  I run the automatic update and am completely up to date.

  Any ideas of what could be the cause?

  Thank you
  jbthorsen45

  Then, I found my problem.  I have installed the Tivo Desktop Plus.  The codecs it uses to convert to different formats somehow in conflict.  So, I had to rename some of the files and he immediately recognized my Tuner card and Media Center is back to life.

• Error message receiver: alidiskviewer.exe has stopped working when you insert a cd with medical images

  Original title: alidiskviewer.exe has stopped working

  I have inserted a cd with medical images on this subject and received this message. What is a windows or another problem. I ran the diagnostic of fix - it, but this did not help.

  Hello

  This can happen if the file is not compatible with Windows Vista.

  Have you tried the steps by Marilyn O, moderator of the Forum in the previous link to use the compatibility mode of the previous link?

  If you are always faced with the question, then you can search the Alidisk Viewer option in programs and features and even uninstall and check.

  For more information, you can read the following article to uninstall the program.

  Uninstall a program

• My secuity essential has stopped working and I received messages that I needed to replace it with a windows vista (version) essentials

  original title: Windows Vista essentials

  Message: Hello. awhile back my secuity essentials has stopped working and I received messages that I needed to replace it with a windows essentials vista (version) I'm not sure of the exact wording. I had to pay for it and I used it for I don't know how long. Now two days ago, that the first security essentials has started to download it again and the vista version just disappered. If someone can tell me what is happening? Thank you.

  Vista WIndows

  Message: Hello. awhile back my secuity essentials has stopped working and I received messages that I needed to replace it with a windows essentials vista (version) I'm not sure of the exact wording. I had to pay for it and I used it for I don't know how long. Now two days ago, that the first security essentials has started to download it again and the vista version just disappered. If someone can tell me what is happening? Thank you.

  Vista WIndows

  You have been SCAMMED.

  The real name is called... Microsoft Security Essentials.
  The program is FREE.

  Here is the link to download MSE, Microsoft Security Essentials:

  http://www.Microsoft.com/en-CA/security_essentials/default.aspx

  UNINSTALL any "windows key vista (version)" you have, if you don't find in your application programs and features.
  You said "the vista version just disappered ', I hope that this is the case.

  What do you mean now "two days ago the first security essentials has begun to download again"?
  How?
  You started the download and installation, or he did in itself?

  What made this 'thing' called?

• Receive error message: "Dell support center has stopped working".

  original title: dellsupport center has stopped working. I do not have anything to do with again, todo with DELL SUP [PORT CENTRE.if it does not stop I take legal action]

  If she does not stop im, legal action, it's harassment. I don't want anything to do with DELL SUPPORT CENTER

  Hello

  1. when exactly you receive the error message?

  2. What is the brand of computer?

  3 did you changes to the computer before the show?

  Method 1: Follow the steps in the following link and check if that helps.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=427832

  Method 2: If the problem persists then, ffollow these steps and check if you receive the same error message.

  Step 1: Try to boot in safe mode and check if the problem persists. Check out the following link to start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the issue is not still in safe mode, and then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.

  http://support.Microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 article to start on normal startup.

• Windows Media Center Receiver Service stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Started getting the error Windows Media Center feared about 3 weeks ago.  I have tried the MS fix, reflected on the web for solutions, have run sfc/scannow (no violation of integrity) and nothing works.  Cannot restore system it's been 3 weeks.
  System was working fine 1 day and then bam... error messages began to appear.  I can always go into Media Center and listen to music or watch recorded shows.  I just can't watch TV or record something again.   I checked the Device Manager - material and everything works fine. Need help please...   Thank you.

  I guess that's the article that you are referring to?

  Error message when you start a Windows Vista-based computer: "Windows Media Center Receiver Service stopped working and was closed".
  http://support.Microsoft.com/default.aspx/KB/936229

  This site has some good ideas for you to try.

  How to fix the Windows Vista registry entries and files Media Center
  http://blogs.msdn.com/astebner/archive/2007/03/16/how-to-repair-Media-Center-files-and-registry-entries-on-Windows-Vista.aspx

  "Windows Media Center Receiver Service... "Error
  http://thegreenbutton.com/forums/p/50233/223005.aspx

  http://www.Google.com/search?q=Windows%20Media%20Center%20Receiver%20Service%20stopped%20working&hl=en&RLS=com.Microsoft:-AU & output = search & TBS = rcnt:1 & tbo = 1

  See if the System File Checker can help you?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  See if you can isolate some processes of third party as the culprit?

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

• I received an error message after installation encyclopedia British and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received an error message after the installation of Encyclopedia Britannica and this application cannot be open.showing the "Startup MFC application has stopped working". How can I fix this?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• When connecting with an Android phone through Verizon for attaching to the internet, receive the message "Microsoft (C) registry of Windows has stopped working".

  twice now that I got "Microsoft (C) registry of Windows has stopped working". Looking for online solutions, it tells me to update... and yet my Windows Update is underway. What is going on??

  I am traveling and using my Android phone by Verizon to tie to the internet... This could be the cause?

  Hi BetheForcia,

  Exactly when you receive this error message?

  Usually, this can happen due to data execution prevention.

  In order to diagnose the problem, you can check in the event viewer to determine the cause of the error and after return with details of the event viewer.

  What are the information in event logs? (Event Viewer)

  You can try to add it in the exception for the prevention of execution of data and check that it works.

  a. go to Start, Control Panel and click on System.
  b. now, click on the Advanced tab, and under performance, click settings.
  c. click on Data Execution Prevention , and then select the Turn on DEP for all programs and services except those I select: radio button.
  d. now click on the Add button and navigate to C:\Windows\System32 and choose the regsvr32.exe file. When you receive the message indicating it could make your computer becomes vulnerable to attack and unprotected, simply click OK to continue.
  e. click OK , and then click OK to exit

  Hope the helps of information.

  Please post back and we do know.

• Receive the error "Windows Media Center Receiver Service stopped working and was closed" after the video card replaced

  I have a HP computer with Windows Vista Home Premium (32-bit) Service Pack 2.  He has a VISX PureTV tuner card and already had an NVidia GeForce 8400 graphics card.  This Setup has worked well for 2.5 years until what the graphics card died last week.  It has been replaced with an ATI Radeon HD3450 and both all Windows updates have made current.  Since that time, the TV tuner did not work.

  When you sign in to an account, it gives the error message "Windows Media Center Receiver Service stopped working and was closed".  I can use Media Center to watch the recorded video before, but if I try to watch live TV he hangs up and close Media Center.  If I try to configure the TV connection in Media Center it tells me that there is no tuner card.

  I looked at the map and see no problem and I tried it back in place.  He has the most up to date drivers (so does the new Radeon graphics btw).  I tried "Uninstall" in the Manager of devices and then put it back, but it was not good.

  "Windows Media Center Receiver Service Stopped Working and was closed" I tried all the fixes I've seen this error.

  I tried all the things I saw here and elsewhere related to this issue.  I did a "clean boot" with all non-Windows services and the disabled startup process.  He always did the same thing and gave the same mistakes.  It seems to be linked to a Windows service, and I hesitate to begin deactivation to track down.

  I ran 'sfc' in mode 'cmd' and he found no problem and none of the files to be fixed or could not fix.

  In the list of services, I changed the login for "Windows Media Center Receiver Service" to "Local System account", Local Service, Network Service and individual accounts, but no permits.

  I'm afraid I'm at the point of having to reload the Vista, but I don't know how to do this and want to avoid at all costs.  I don't have the recovery disks and software.  Is this enough?  Can I reinstall from the recovery disks without wiping everything aft of the configuratiion with which it was delivered?  I guess personal files will be OK (although I don't know this for sure), but I'm afraid I'll have to reinstall other applications, my family has developed over time and perhaps lose the media protected by DRM licenses.

  Someone has encountered anything like this or have any suggestions?

  Well, I finally stumbled into the solution.  It was caused by a conflict with another application.

  A few weeks before the card failure I had installed a program called video capture Replay Video Capture that I had bought a few months ago and never used.  However, at this time where everything including the TV tuner and Media Center worked well that's why I associate the problem with this software.  The problem comes after the system is rebooted the first time after installation.  In my case, it has not been rebooted until a few weeks later as part of the recovery of the fault of the graphics card.  Suddenly, the TV tuner did not work and I get the error messages mentioned in this title of the thread.

  I was at the end of my rope with this and was just to clean your system to do a reformat and reinstallation.  I uninstalled the Replay Videa Capture program to move it to another computer, and when you restart the computer I noticed that the error message disappeared.  Of course I went to the Media Center and could set up my TV tuner card and watch television.

  Looking for some info on this conflict, I found the following. (http://forum.applian.com//showthread.php?847-Conflicts-between-RVC-and-XP-Media-Center-OS&s=c0aec9897b51d550c47b919e73e59bfc)  It is difficult to say who is at fault in the present.  I'm sure that Microsoft accuses Applian for the encoder to mpeg (mcm2ve.ax) used in Replay Video Capture, while Applian says that the problem is a Windows process (ehrec.exe) that works all the time, hogging the tuner on the system device.  According to Applian other products similar to theirs have this conflict as well due to the process of Windows.

  Fortunately, there is a solution in this case.  Applian has released a new version of Replay Video Capture (version 4.2) that uses a different mpeg encoder and eliminates the problem.  Given the surprising lack of info about it on the Microsoft Web site, I wonder how many other people with this unresolved issue dealing with the same thing as me.  If you're like me and you don't usually need to reboot your PC for a few weeks at a time, you may never know to associate the problem with the application.  What a waste countless hours trying to diagnose, and most disconcerting, that's what I was about to go through a reformat and reinstall because of this.

  Thought I'd post here my problem resolution in the hope that it might help someone else.

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I received and after the British insatalling encyclopedia and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received and after the British insatalling encyclopedia and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem? IM using Vista Home Basic 32-bit.

  It comes with Vista, upgrade install and activate Forum.

  Try in Vista programs Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon. Mick Murphy - Microsoft partner