RE: battery issues after ics updated in neo v

Hi everyone... anyone if possible session, Nadine, uliwooly-wooly, u can help me out in this issue.

My neo v done face to exhaust the severe battery after that ics put up-to-date... I read out in blog many people complain about this... I can't resist some quantity to exhaust the battery but not this.much...

my particular behavior of the battery:

backlight off airplane mode + all back grounded apps off + data traffic off - phone just idling = battery lasts for only 4.5 hours

backlight on + navigation for half an hour + battery 2 hours only.

Please don't think I'm great... but here's the problem I meet...

my phone is only 9 days old... my battery is genuine... I got it in a store selling authentic sony retail.

one please suggest me a way to improve the battery life...

OKH remember rooting may void your warranty, and you do so at your own risk

But after rooting and the removal of bloatware, your experience would be great

Check this thread for rooting

Tags: Sony Software

Similar Questions

  • unusual warm-up and drainage of battery fast after the update for sierra

    everyone knows unusual warm up their MacBook pro and the draining of battery faster after the update to Mac OS sierra?

    my MacBook 2015 mid pro gets hot when I close the screen and put it to sleep, as well as drainage of battery faster than usual. everyone knows the same?

    Try to use the activity monitor to see where will your battery life.

    1. go to the docking station
    2. Click on finder
    3. Click the menu go
    4. Choose utility
    5. Double-click activity monitor
    6. Click the stack tab

    See you using your battery?

  • Dell XPS 13 TrackPad issues after driver update

    After updating my XPS 13 Cypress Ultrabook drivers for newer drivers published yesterday on the Support from Dell downloads page, every action (although still active) have stopped working. The trackpad itself always seems to work fine after the update of the driver, but no gestures work longer. They all worked just before the update.

    I tried the normal game of toggle, restart, update. But if someone has had this problem or knows how to solve?

    Thank you

    After much research and with the help of Terry B with send me a second XPS 13 and taking my previous one back to the laboratory, I found that the issue is actually with my Antivirus software. I use AVG, and I am at a loss to explain how, but I can restore scrolling and other gestures to uninstall. I can reproduce again lose its Setup again and perform a restart.

    I am at a loss as to what why, AVG allows the driver to start and work properly by any other measure, however, I'm on the verge of scrolling of web pages for a new virus scanner!

  • Monitor the issue after Windows update

    I installed the Windows updates today, and after installing and restarting, the saturation of the color on my monitor is out of line. There is intense color saturation and it made all my files photo as well.

    Running windows 7 and a HP w2338h monitor.

    Thanks for any help on this

    fifthboss,
    You should look through the updates installed to see if there was an update to the video card.  I would then check with the manufacturer of your video card for the latest driver.  If you just updated to the most recent and feel it affected the color then you can restore the previous driver.  Then you can contact the manufacturer of the video card on the driver and they know the issue and see if they are still aware and have a fix. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Major Flash issues after latest update

    I've recently updated to 12.0.0.70 version of Shockwave flash on 27.1 FF and he broke my installation of FF. I get various errors depending on the site on which I try to use. Some sites give me a black screen with white down and State "an error has occurred please try again later." On other sites, I get an error message of Shockwave script and when I click on the button of the dialog stop FF crashes to the desktop

    Disabling the ad - ons and running in safe mode is not, as well as the profile of cleaning. Then, I turned FF Protected mode off by following the instructions on the Adobe site. It is a partial solution. It keeps me from making the mistakes of Shockwave script. However, Flash video playing out of sync. He jumps around randomly and and the sound does not synchronize with the video. I always get the "an error has occurred please try again later" on them, the sites where I was getting this error before.

    Per a suggestion on another thread, I played with the hardware acceleration feature. He has not fixed the problem. I am at a loss on how to go further.

    Hello

    Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    More information on the resettlement of Firefox can be found here.

    WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

    Please report back to see if this helped you!

    Thank you.

    You can also try a full RESET by following the steps below. Only follow these steps if the above fails.

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.

    Note: This will make you lose all the Extensions and preferences.

    • Sites Web open is not recorded in less than 25 versions of Firefox.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    I hope this helps!

    M

  • Issues after recent updates

    Since the new updates a few days ago I notice unusual behavior from my system.

    Startup time is unusually long. From the start, I now see a greyed 'Not' the circle with a line through to the square where the Apple Logo was.

    The system does not boot...

    In addition,

    If I'm returning from a "lock screen" I enter my password, and screen "stays" in what seems to be always the recovery password.

    If I scroll down, I can see all the apps that are running... I can then change the size of the window and my office is displayed correctly.

    My system is a 2011 with 16 GB i7...

    Just an info on certain issues...

    Please download and install EtreCheck from http://etrecheck.com/

    Run it and post the report here.

  • Security issue after the update to Acrobat Pro 9.5.0 in 9.5.1

    BACKGROUND:  I have a MacPro running OS x 10.6.8.  I now have Acrobat Pro 9.5.1.  When I tried to upgrade from Acrobat Pro 9.5.0, I got an error message that says that my application could not be updated because it had been "modified" or a Word to that effect.  He told me to reinstall Acrobat Pro.  Dutifully, I inserted the disc of Installation 1 and started the chore.  He stopped and asked me to disable several security features because the installation could not go ahead until what I did.  I did as I was instructed and the installation was successful, including the update of all 18 Acrobat 9 Pro updates (Adobe don't use the Combo updates to relieve the consumer of such a daunting task?) But I digress...

    The problem is that, since I've done this installation and update, I tried to keep the security elements, I was instructed to turn off and I turned everything I could remember on.  It seems I missed one or more, because, when I now run MacScan, I get as high as tracking cookies detected twelve requiring a kidnapping where I received virtually no front.  I run MacScan daily and sometimes more often.  Since the update to Acrobat, I dared not unfamiliar web sites.  I went to my regular sites, but I must have forgotten to close a hole somewhere The QUESTION: can someone list all the safety measures that must be disabled before you install and update Acrobat?  I'm puzzled and I hate to be rejected which prevented the I.

    Hi John,.

    We generally recommend disable antivirus when you install or update our software as often times anti-virus software may complicate installations.  There is no further safety we recommend for normal installation of our software.

    I'm an apologist for the tedious process of update.  We approached it with Acrobat X where all updates are cumulative, but obviously likely a good consolation after the long task of updating to Acrobat 9.  In case you need to reinstall Acrobat 9 in the future, you can choose to ignore the restart request.  This will make the process much faster update for you.

    Kind regards

    David

  • Toshiba 40L7335D - various issues after firmware update

    Hi all,

    I bought a Toshiba 40L7335D, serial number 70T04380.Tv was working perfect until the last firmware update. No, I have problem.
    When I reproduce any movie in 3d or 3d demo, I have bad reproduction. Picture is blurry and a bit blurry. It was a perfect image before update. And I have this problem only when I reproduce 3d movies/demo, I don't have this problem in menu or when I play normal movies (in 3d).
    I tried the two glasses I ask my friends to see the problem and each of them felt same question.
    My firmware is 7.1.92.61.01.1

    How can I reset firmware firmware to factory, cos it was perfect for me. Or how can I solve this problem with this firmware?

    Thank you in advance.

    Originally posted by Cimii
    Hi all,

    I bought a Toshiba 40L7335D, serial number 70T04380.Tv was working perfect until the last firmware update. No, I have problem.
    When I reproduce any movie in 3d or 3d demo, I have bad reproduction. Picture is blurry and a bit blurry. It was a perfect image before update. And I have this problem only when I reproduce 3d movies/demo, I don't have this problem in menu or when I play normal movies (in 3d).
    I tried the two glasses I ask my friends to see the problem and each of them felt same question.
    My firmware is 7.1.92.61.01.1

    How can I reset firmware firmware to factory, cos it was perfect for me. Or how can I solve this problem with this firmware?

    Thank you in advance.

    What version of Firmware were you using before? Although, that would NOT (!) no difference in terms of performance 3D-picture.
    None of the FW which were published in the history of this model, version had a report any upgrades of the 3D image.

    So when you say, that the previous version of SW obtained the best results, there is no reason objective for this hypothesis. Please be aware of this.

  • Someone at - it issues after the update of VRT 2016-02-29-001?

    Seems VRT last update broke the power of fire this morning in my lab at home. ASA X 5506. cannot install policies and syslog shows:

    2 March 2016 04:16:05 snort [9939] of firepower: FATAL ERROR: dynamic detection library "/ var/sf/detection_engines/*GUID*/so_rules/protocol-scada.so" version 1.0 update with the version of the engine dynamic library 2.5 is not compatible with the current engine dynamic library ' / var/sf/detection_engines/*GUID*/libsf_engine.so ' version 2.4.

    Seems/var/cisco/deploy/pkg/var/cisco/packages/modules-1910-x86_64/so_rules installed by the update a incompatible libraries...

    Managed to solve the problem by connecting to the ssh/console and by:

    sudo bash
    CD/var/sf/detection_engines / * GUID *.
    MV so_rules so_rules.old
    ln-s/var/cisco/deploy/pkg/var/cisco/packages/modules-1908-x86_64/so_rules so_rules

    Replace * GUID * above with the identifier unique on your system.

    And then push policies. Required URL filtering a restart of the module in order to start working again.

    Not sure, it is a recommended fix, but a good thing it is only a laboratory.

    It happened to someone else here?

    Hello

    Yes, there was a problem with the SRU version and it was taken out of the OCC.

    If you are on recommendation 6.0 is to upgrade the SRU that was released today and apply policy again.

    Kind regards

    Aastha Bhardwaj

    Rate if this is useful!

  • Problems after Windows Update on Vista wireless

    It seems that other people have a similar problem, but I'll post this new...
    I've been running Windows Vista Ultimate on my Toshiba laptop for years without any problems.  Earlier this year, I started seeing issues after Windows updates.  The main problem is that after updates Windows, my wireless network is is more noticed and the wireless card (which was installed on the computer, and never had problems before) is not recognized.  I manually installed updated drivers with no luck.  The only thing that has worked is to do a system restore to a point before the updates.  The problem seems to be related to an update in general, I can't uninstall.

    I find it extremely ironic that I have no problems with Vista until Windows 7 is launched. First of all, it's the wireless card, then a problem with a driver graphics card (apparently... which seems to be fixed now) and return to the wireless card.  Should I expect to continue to have problems unless I upgrade to Windows 7?  I can't continue to spend half of my day trying to fix my computer after an update that is supposed to fix the errors, but I don't like the feeling that I am forced to upgrade.

    Hi dabaum77,

    From your post, it seems that the issue was occurring when Windows updates are installed automatically again even after the restoration of the system and that is why I suggest to restore the system again to a point before the updates and download and install Windows updates manually.

     
    Access the link below
    Follow these steps to disable the automatic updates:
     
    1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
    2. in the left pane, click on change settings.
    3. under important updates, choose the option you want.
    4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Install the updates one by one and check the update is causing the problem to occur. If the problem persists due to a particular update, repeat the process and refrain from settling the problem causing the update to.

    You can also check the update problem in Windows Update history.
     
    Follow the steps to check which day caused the issue:
     
    1. open the control panel (all items view), and click the Windows Update icon.
       
    2. click on the link to view update history.
      
    3. to view the details of a single Windows Update-
    (A) select and right-click on a Windows Update list, and then click details.

    (B) click on close when finished.
     
     
    You can also uninstall the update that is causing the problem to occur, although it is not recommended.
     
    1. to uninstall a Windows Update, you must go to programs and features. There are several ways to find it. One of the simplest is to use the search box on the start menu.
     

    2. in the programs and features, click the link updates installed.
     

     
    3. after a few seconds, Windows Vista will load the list of installed updates. Scroll down the page until you find the update you want to delete, select it with the mouse and then click on uninstall.
     

     
    4. Windows Vista will ask you to confirm that you want to uninstall the update you selected. Click Yes and the uninstall process will begin.
     

     
    5 depending on the size of the update, the uninstall process may take from several seconds to several minutes.
     


    6. wait for the window above will disappear and, if necessary, restart your PC. The update is now deleted.
     

    Aziz Nadeem - Microsoft Support
  • P Xperia with ICS update battery life

    My xperia P has been upgrade ICS a few weeks ago (battery already has enough time to "good standing") and ive noticed that when I check the use of the battery for 100 60 + is used by the screen alone? Even if I disable adapt to lighting conditions and is at the lowest brightness? Is there any solution for this? Or is this normal on ICS update? Long on screen is 2 hours 43 minutes. Its battery on for nearly seven hours.

    It is the normal battery usage.

    antivirus or taskillers could be the culprit

    Don't forget to mark the correct answers & useful answers

    Another issue, if you have time please check this thread

    http://talk.sonymobile.com/thread/44888

  • Xperia neo v ICS update problem.

    Xperia neo v ics update is available for the India.

    I'm in b/w process update looks like it stuck at 2. Preparation - initialization... hour n.

    Tried again but still facing same prob.

    No need to open in safe mode... me too has not had same problem that you face.

    Directly open update service connect you phone by USB data cable

    then it will warn you... you have an update...

    After that that she will be asked to turn off their phone and hold the button and insert the data cable for your phone... don't give off they botton rear...

    then it will recognize... and download your update file and it will update automatically your cell phone

  • Battery drain after ios 10 updates. Any suggestions?

    Iphone6 battery drain after ios 10 updates. Adjustments or advise please

    Hello, Shabiareekkan!

    Thank you for using communities Support from Apple. I understand from your post that you have concerns over your battery life after updating to iOS 10. I rely on my iPhone for spend me the day and want to ensure that your battery is hard as long as possible! I'm happy to help you.

    My suggestion is to take a look at the following article. It will help you to detect the specific applications or processes may use more energy than others.

    On the use of the battery on your iPhone, iPad and iPod touch

    I encourage you to give special attention to the section 'Adjust settings to improve the battery life', that will connect you to the following site. It contains tips and tricks to help you get the most out of each load.

    Maximize the life of the battery and battery life

    Have a great day!

  • Start-up and white screen issue after updating to v10.11.5?

    I can't say 100% that my problems are related to the last update, but I thought I'd ask.

    I've updated about 4 or 5 days ago, and although the questions did not begin immediately, they start after the update. It should be noted that I have never had issues like this before.

    Here are some of my questions on my MacBook Pro (17 inch, early 2011), 2.2 GHz Intel Core i7, 8 GB at 1333 MHz DDR3, Intel HD 3000 512 MB graphics card

    1. the monitor will sometimes go haywire and a strange split, screen where the mouse can go to the left side of the screen and reappear on the right side of the screen, because the office is now split into two

    2. computer crashes and the monitor starts flashing to show a blue zigzag striped background

    3 freeze during startup and never restart computer. Occasionally, it will start very well, but the computer locks upwards at some point while using

    4 computer at boot flashing out to a white screen then restart never

    Thanks for any help.

    Now I'm starting to think my problems are related to a single user, sign in. Only 2 people use the computer and my connection seems to be fine. No crashes or anything like that.

    The problems start when my wife logs in to his user account.

    Thought I would mention it.

    Any help/response would be appreciated.

  • Battery drain after update to 9.2.1 :(

    After that update to 9.2.1 my iPhone 6 s is messed up - it drains the battery FAST.

    The iPhone is always "hot" and Safari + mail uses 85% of the battery... and I'm not even using the phone!

    Apple - it's a joke.

    Anyone with a solution?

    I have the same problem with my iPad for downloading the 9.2.1 update. My iPad used to have a fantastic battery life, but now drains quickly when I am using it, even if it is plugged and charge - which cannot be right.

    I looked for solutions and the done reboot several times that I can count.

    I apply the entire farm advice I can find to save, turning off Push email, variation of brightness, switching off motion, etc etc, but no obvious improvement.

    Someone here has a solution, or are we supposed to put up with it until they come up with a fix? I was on IOS 8 or something before, when they were on the right, and the difference in the life of the battery is staggering.

    What bothers me the most is that my battery goes down even when it is plugged in and in charge, when I use it. It is used to load correctly when it is connected and its use.

    Come on Apple, sort! Does anyone know if another fix is on the way?

    Unless someone else here has any suggestions more? Reluctant to all save and reset everything, what is obv last spring.

    Angel153

Maybe you are looking for

  • Cannot open PDF files

    I have a HP Pavilion desktop pc with card mother at660a and that you just download the latest Mozilla fire fox and now I can't open PDF files when I am still on the web, can I open then, but as soon as I insert in downloads on my drive hard all the t

  • G6-2330ee Pavilion: Widi software for windows 10

    Hi all How are you all and hope all are well. I upgraded my g6-2330ee Pavilion with Intel HD Graphics 4000 & ATI Radeon 7670 M to 10 windows. I tried to install the Viewer software Wifeless Intel I downloaded the version of Windows 8 software to the

  • Windows 7 Home Premium 64 SP1 Activation with a non - SP1 product key

    I have a problem of activation Windows 7 Home Premium 64 bit SP1 properly installed .iso digital river with the original product key on my laptop. -Code error 0xC004E003 -The original product key isn't for SP1.  Since the Windows label on the laptop

  • Smartphones blackBerry "purchase not found".

    Two days ago, I bought an application for which I had first download a trial version (which had just expired).  After I had made the purchase via PayPal registration My World says "buy is not found".  This has not changed after repeated log-ins.  I r

  • How to change the LCD screen?

    I have a t61p with LCD 1900 * 1200 WUXGA but the police is too small for me, I can fix the windows police, but in some applications, the fonts are not adjustable. It is therefore very difficult. how much I pay if I ask lenovo to change a lcd display