Re: Burning failed
I have Toshiba Satellite A200
I got the error message - 104 when I try to burn CDs. I used Nero and Poweriso and Infrarecorder, but it did not work.
I hope that you can * HELP * me.
* Thanks in advance: *
* This is the mistake of JOURNAL *.
Windows 7 6.1
IA32
Nero Version: 10.2.12.100
Internal version: 10,2,12,100
Recorder:
= Scsi-device-map =. = CDRom-Device-map =. AutoRun: 1 27.12.2010 12:56:39 text 0 file Isodoc.cpp, line 7008 #2 Hello The possible reasons for burning failed: 1 Cd/dvdrom malfunction 1. try to use high quality Tdk or verbatim media. Tags: Toshiba The attempt to burn disc failed. Burning failed because of a medium write error. Created playlist, click the File command: "Burn playlist to CD." Burn insiders, but after two pieces had been registered, eject disk automatically with the message: "the attempt to burn disc failed. Burning failed because of a medium write error. "Burning speed was set to 8 x. Recent history: previously, I successfully burned two disk at maximum speed, but it took hours to write the tracks on the disc! Using the highest speed it shouldn't take hours to write a disc. Have you tried a good quality disc? I bought cheapo discs in the past and had 50% failure on me during combustion and 25% success fail to try to replicate. You can try a disk cleanup drive. Slot loaders act as vacuums for dust. Yet, I would not hold for a large part using a. You provide details on your computer. I'm guessing that it is 5 + years old, which means that you could easily be in place for a replacement drive (or buy an external one). Satellite A210 - Nero says burning failed but she is successful I have a problem in my ODD, when I burn at the end it says burn failed. But when I test the file was there and it was burnt successfully. my DVD - R drive is a TSST L632H TO03. But when my firmware is TO02, there is no problem, is there another way to get off my to TO02 TO03 firmware? Thanks for your help. I used Nero, I reformat my laptop earlier but it's the failed message, burned appear but the burn is successful when I insert again in the player. Model: Toshiba A210-1AH My request: it back TO03 to TO02 or other advice you can give. Hello The message or notification is created by Nero and not by the firmware. It turns out that the data on the disk was written correctly it means that the firmware works very well Maybe you should update Nero software or try other drives from different manufacturers. DVD burn error, "burn failed". I record in windows media center and fire shows them on a dvd. I've never had a problem until yesterday. I am trying to burn the dvd, but get the answer, "burn failed" an error occurred while burning cd/DVD. I tried the store several times and he always tells me that the problem is resolved, but it is not. I also have downloaded updates and restarted the computer without success. Help! Hi, Helen,. Access Event Viewer Windows and search for messages that coincide with the approximate time that you tried to burn the DVD. After return of the impossible event ID and message During this time, see if the Gokul T solution helps Or, Naman R solution. DVD player will not read the discs more after burn fail Something strange happen to my DVD player. I tried to burn a blank DVD but it failed without any error message: the DVD has not been recognized. Since then the DVD player will not only read one of my other burned DVD that I need for my daily work. Can anyone help? DVD players are not particularly robust, especially designed patterns for portability. It may have burned his laser for DVD work. Unable to create recovery discs, burning fails - F:\07007XSP.swm whenever I try to create the recovery disks it starts to burn, then I get the error: Cannot read the next file. (error code: 020150-20-00000000) How can I solve this problem? The problem is that you used is not compatible DVD disc. Double layer burning fails every time - Tecra A9 Hi all. My Tecra A9 is equipped with Teac DVW28ECT (Rev7.5A) I have no problem burning on a DVD single layer... but EVERY time I try to burn to a double layer process stops about 25% in the burning process. I can't find more recent updates of the driver/firmware for the dvd drive. I tried all brands of disk... Burning programs I use are up-to-date and are great for double layer / DVD9 disc production. Any advice of members who can help would be EXTREMELY appreciated! Hello I checked the manual and there is info that the laptop support DVD + R DL and DVD-R DL (format 1) But certain types and formats DVD-R DL and DVD + R DL disc may be unreadable. Please see also the 90 user manual page. Notes; the companies mentioned in the user manual are disc manufacturers one no suppliers! Why Burns fail, I have 120 mins on DVD + R and video space is 109 minutes? HP Pavilion Desk top P6610f Win 7 Home Premium 64-bit internet wireless. I burned DVDs with the engraver of DVD HP Media smart but it wouldn't let me not even burn more than 59 minutes on a single disc. I use a trial version of software from NCH EXpress Burn and it seems to work much better, but when I tried to burn a video of 109 minutes for disc 2 hours or 120 minutes, he said the he did not allow. In fact, he said that she had more space on the disk that the factory said that this was the case the day before. NCH says the drive has 2::26 s minutes free space, the DVD says there 2 hours and I tried to burn a video of 109 minutes on a 120 minute drive. The video is too long or is it a different problem entirely? Thanks in advance for your help. Hello Depending on the type of the size of the video and the file, you can write video from 60 minutes on a 120 minute disc. For example: same length of a film, but you can buy a simple DVD layer, double layer DVD and BluRay disc. In this case, the decline in the quality of the video must fit. Hope this helps. I am trying to burn a CD and it starts to burn, and then tells me that burning failed. See the subject line. That's my problem. My D drive will not burn a cd. Hello You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and) Burning at low speed, or by using the master could help. A CD/DVD cleaner might help. Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic. CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs Several good info here: CD/DVD units Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives =========================================== This troubleshooting could not help if there is alignment and/or wear issues however it Step 1: Please do all the same underneath if you did some before as is often total Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab. Your CD or DVD drive is missing or is not recognized by Windows or other programs Try this fix manually if the Fixit 314060 does not work Your CD or DVD drive is missing or is not recognized by Windows or other programs- The CD drive or the DVD drive does not work as expected on a computer that you upgraded to When you insert a CD or a DVD, Windows Vista may not recognize the disc Your CD or DVD drive cannot read or write media - A Mr Fixit CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows Hardware devices not detected or not working - A Mr Fixit Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
=============================== Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD Did you follow the Troubleshooting Guide for the reader who still does not work? There are Check with your Maker system and a device for the two possible firmware updates and
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318} ----------------------------------------------------------------------- You can probably find more info here and maybe even the exact registry for your CD/DVD settings Forums - a lot of expert real help CD/DVD units Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point) DevManView - free - an alternative to the standard Windows Device Manager, which displays all the I hope this helps. Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">-> Problem with pictures on the disc burning While burning pictures on a cd, at the end of the process it failed, "Burn failed because of a medium write error". Does anyone know what this means and what I can do to pass successfully Burns? Thank you! This means generally that you use bad quality media and/or too fast a write speed and/or your superdrive drive lens needs to be cleaned. Regarding the media, stay with Verbatim or Taiyo Yuden. Use a burning only 2 x or 4 x speed. Use a lens cleaner exclusive which has small brushes to clean the lens of the laser. Re: Satellite L100 129 - cannot burn DVD more but can write to CD Hello I speak very well English, please try to understand me... * Information system *. * Information program *. * User information *. * Options setting *. * Device (s) list *. ACPI.sys ACPIEC.sys C:\windows\system32\drivers\aegisp.sys afd.sys asukl9p6. SYS
* Detailed information from the device (s) *. (D) HL-DT-ST DVDRAM GMA-4082N(1:0) for detailed information. Identification of the seller: HL-DT-ST * Source Image/disc information *. Session 01: * Newspaper * dumping/record of progress I don't know how to solve it please I need help... Thank you Hello! You can burn discs using another program Nero for example or this only happens with alcohol? In your case, I would try to remove the upper and lower filters in the Windows registry. Normally this does not solve the problems with the CD/DVD drive. Just follow the steps described in this workaround from Microsoft: Good bye Copy of a DVD, go to half way then fails Original title: DVD burner fails. When I start copying an iw dvd copy 1/2 of it. And he said failure of the recorder. Try a different brand of media. If that fails, replace the unit. They are now about $35.00. It is not worth the pain. Tom Ferguson DVD burner in the new laptop VERY SLOW - PLDS DVD +-RW OF THE - 8A5HH I just got a new laptop from Best Buy - Dell Inspiron 3521. There a PLDS DVD +-RW OF THE - 8A5HH drive built in. I tried to burn a data CD, but it failed several times. I tried these in the file Explorer and CyberMedia Power2Go Burns, also at the Maximum speed or 24 X. It was using both Philips 52 X speed CDR burning failed at the end, when the burner is trying to close the disc. He couldn't complete a burn speed X 10 (very slow) to Power2Go. File Explorer strangled between 7 X and 10 x to be able to burn and did not show a dialog box saying if the burn is complete or not. He left me guessing. It was after a call to Dell technical support and a trip on the Microsoft Support Site to use their CD - RW test online. He said he updated something, but I don't know what. I must say it's a disappointment. I think I should have bought a laptop without a burner inside and bought an external burner. At least that way I had have the choice of what I got. This burner is slooowly. Anyone have any idea if this can be fixed, or is it just a limitation of the burner is in this laptop? If it is material, well I guess you get what you pay for. Dell phone support fixed it. Went to the Microsoft Support website and ran a convenience store of material for DVD players, who suggested the update of the firmware of the player. He did that, and then we went back and burned a disc in the file Explorer and it worked, but only to 10 X I opened Power2Go and burned a disc at 24 X, and it burned successfully. I didn't actually measure the speed (Power2Go shows you that), but it worked well and quickly. I think that the problem was an outdated firmware for the DVD/CD burner. Flashing to the latest firmware fixed the problem. I want, I knew that this troubleshooting tool on the Microsoft support site, but now I can not find. -- When I try to burn a cd, it goes up to 99% complete then says that Windows Media Player has encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged. so, how can ensure me that the burner is connected? When I try to burn a cd, it goes up to 99% complete then says that Windows Media Player has encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged. so, how can ensure me that the burner is connected? burning error code 0 x 80004005 during problem. Original title: problem burning When I used to burn an iso image using windows image burner, it displays the error message "burn failed"(error code 0x80004005)... ". Is the problem in the iso file or in the dvd drive or in the windows... How can I recover this problem... Hello I hope this helps. All new Iphone 6s do not keep the load. I bought the new IPhone 6 s today two weeks ago. I'll have to charge at least twice per day, within a period of 10 hours. I was told when buying I could get 17 to 24 hours autonomy. I'm not running several apps and do not keep a bright screen. How c ab214TX: upgrade ram in hp-ab214TX I want to install a 4 GB of Ram (PC3-12800(800 Mhz)) in my laptop Hp Pavilion 15 - ab214TX that currently has an 8 GB ram (8 GB PC3 - 12800 DDR3L - 1600). Is this possible? HP Pavilion n031se-15 Notebook PC - can I replace the optical drive on my own? I would be well capable of replacing the existing with a new dvd rw drive? When internet TV will be available in the Canada? I just bought windows 7 to upgrade my computer with, and one of the key features that interested me was the television online. SO, after spending $ 150 for the new program I get my computer set up and find I can't access any type of online TV at all. How to wear my java blackberry application to BB10 Can someone please tell me how I can do? I have builf this from windows eclipse BB pluginh All the tools used? and no matter what other coding more? Thank you
Adapter driver:
Car buffer: 8192 KB
Bus type: Via inquiry data
CD-ROM:
Adapter driver:
CdRomPeripheral: WPOPO KLMZCXYBC5M akdjxv9x 1.03 Port 5 ID 0 DMA: Off
TOSHIBA DVGW/HD TS-L802A E: CdRom0
WPOPO KLMZCXYBC5M f: CdRom1
=======================
Excluded drive IDs:
WriteBufferSize: 83886080 (0) bytes
BUFE: 0
Physical memory: 2046 MB (2095512 KB)
Free physical memory: 1184MB (1212744kB)
Memory in use: 42%
QUERIES PFiles: 0x0
Global Bus type: default (0)
Control supported media: disabled (0)
ISO
12:56:39 #1 text 0 file SCSIPTICommands.cpp, line 464
LockMCN - completed successfully for IOCTL_STORAGE_MCN_CONTROL
ISO document burn settings
------------------------------------------
Determine maximum speed: FALSE
Simulate: FALSE
Write: TRUE
Finalize the CD: REAL
Multisession: TRUE
Multisession type: Start multisession
Burning mode: DAO
Mode : 1
ISO level: 1 (Max. of 11 = 8 + 3 char)
Character set: ISO 9660
Joliet: TRUE
Allow pathdepth more than 8 directories: TRUE
Allow more than 255 characters in path: TRUE
Write ISO9660; 1 file extensions: TRUE
2 bad discs
Burning software 3 Associates question/Os
2. remove the upper/lower filters: http://aps2.toshiba-tro.de/kb0/TSB7801XL0000R01.htm
3. try another program like ashampoo burning studio burning.Similar Questions
DVD drive: TSST TS-L632H TO03
So it s not a firmware issue.
I have an A210 and this message never took place!
F:\07007XSP.swm
Test different DVD. I use TDK DVD-R and I think it's very good brand.
Also the DVD-R DL can be burned using the 2 x speed and the speed of 2.4 x DVD + R DL.
You will find information on tested DVD DL disc that are compatible with this laptop.
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.
tolerances. They may be delivered, but it is generally more economical to replace the disk.
http://Club.myce.com/
http://www.myce.com/storage/
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014
a shot.
a process that solves the problem.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
http://support.microsoft.com/kb/314060 - a Mr Fixit
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
a Mr Fixit
http://support.Microsoft.com/kb/982116
for Windows Vista
http://support.Microsoft.com/kb/929461
http://support.Microsoft.com/kb/939052
http://support.Microsoft.com/GP/cd_dvd_drive_problems
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
http://support.Microsoft.com/GP/hardware_device_problems
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
the correct registry entries for your car.
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
drive from someone with the same model.
http://Club.myce.com/
http://www.myce.com/storage/
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I have a Toshiba Satellite L100 129. I burn long before DVDs, but since a week I can't do anymore! I can't burn CDs even but today morning I tried to burn a CD and it worked successfully. I also tried to burn a DVD, but it does not work. Whenever I tried it shows me this kind of message in alcohol:
Windows XP Home Edition 5.1 Service Pack 2 (Build 2600)
Processor Info: Genuine Intel(r) CPU T1300 @ 1.66 GHz (1662 MHz)
Memory available to Windows: 1.038.384 KB
File name: C:\Program Alcohol Soft 120\_Alcohol.exe
Legal name: Alcohol Soft Development Team
Description: Alcohol 120%
Original: Alcohol.exe
Product: Alcohol 120%
Brand: Alcohol Soft Development Team
Copyright: Copyright (c) 2002-2008 Alcohol Soft Development Team
Version: 1.9.7 (Build 6221)
Date: 2008/02/22
Size: 1815496 bytes
Hash: ee833b4b446b7fa2e05541d4090f3c33
File name: C:\Program Alcohol Soft 120\alcoholx.dll
Legal name: Alcohol Soft Co., Ltd.
Description: Alcohol virtual device control library
Original: alcoholx.dll
Product: alcohol
Copyright: Copyright (C) 2000-2008
Version: 4.12.0 (version 0)
Date: 2008/01/18
Size: 1244640 bytes
Hash: f1274ca402d9296cd31eacc34a88bbea
File name: C:\Program Alcohol Soft 120\devsupp.dll
Legal name: Alcohol Soft Development Team
Description: Alcohol software device capability
Origin: devsupp.dll
Product: Alcohol software device capability
Copyright: Copyright (c) 2002-2006 Alcohol Soft Development Team
Version: 2.5.4 (Build 222)
Date: 2008/02/22
Size: 60288 bytes
Hash: 4b22ef831539d9f5b6923d3d286141e7
License: UNREGISTERED
Registered user ID: not REGISTERED
Devices of control interface: default driver control Interface
CPU priority level: high
Size of buffer (MB): 256
Examine the accuracy of data read from physical devices: Yes
Activate the Enhanced weak sector Scanner during dumping: No.
Overburn disc (s): No.
Disable "write better automatic speed selection" if possible: No.
Fill memory buffer before recording discs: Yes
Book now Type DVD + R / DVD + RW disc as DVD-ROM when burning: No.
Ignore Media Type: No.
Refrigerants (re-writable physical Signature) emulation: No.
BAD sectors emulation: No.
Data fixed & emulation of subchannel: No.
Laserlock emulation: No.
Current language: French
(D) HL-DT-ST DVDRAM GMA - 4082N (atapi, Port 1, Bus 0, Target 0, Lun 0)
(G) QO2663I TAI648E (asukl9p6, Port Bus 2, 0, Target 0, Lun 0)
ATAPI.sys ATMFD. DLL audstub.sys BATTC. SYS c:\windows\system32\drivers\beep.sys
BOOTVID.dll Cdfs.SYS cdrom.sys CHDAud.sys BoiHwSetup.sys
CLASSPNP. SYS CmBatt.sys, compbatt.sys disk.sys DLABOIOM. SYS
DLACDBHM. SYS DLADResN.SYS DLAIFS_M.SYS DLAOPIOM. SYS DLAPoolM.SYS
DLARTL_N.SYS DLAUDF_M.SYS DLAUDFAM. SYS drmk.sys DRVMCDB. SYS
DRVNDDM. SYS dump_atapi.sys dump_WMILIB. SYS Dxapi.sys dxg.sys
dxgthk.sys enodpl.sys Fips.SYS fltMgr.sys Fs_Rec.SYS
Ftdisk.sys hal.dll HDAudBus.sys hiber_WMILIB. SYS HSF_CNXT.sys
HSF_DPV.sys HSFHWAZL.sys HTTP.sys i8042prt.sys igxpdv32. DLL
igxpdx32. DLL igxpgd32.dll igxpmp32.sys igxprd32.dll imapi.sys
Intelppm.sys ipnat.sys ipsec.sys isapnp.sys c:\windows\system32\iviaspi.sys
Kbdclass.sys KDCOM. DLL kl1.sys klbg.sys klfltdev.sys
klif.sys c:\windows\system32\drivers\kmixer.sys ks.sys KSecDD.sys klim5.sys
mdmxsdk.sys mnmdd. SYS Modem.SYS mouclass.sys MountMgr.sys
C:\windows\system32\drivers\mrxdav.sys mrxsmb.sys Msfs.SYS msgpc.sys mssmbios.sys
MUP.sys NDIS.sys ndistapi.sys ndisuio.sys ndiswan.sys
NDProxy.SYS netbios.sys netbt.sys Npfs.SYS netdevio.sys
ntdll.dll Ntfs.sys, ntoskrnl.exe Null.SYS OPRGHDLR. SYS
PartMgr.sys pci.sys system32\drivers\pciide.sys PCIIDEX. SYS pcmcia.sys
PFC.sys portcls.sys psched.sys ptilink.sys PQNTDrv.SYS
Qkbfiltr.sys qmofiltr.sys rasacd.sys rasl2tp.sys PxHelp20.sys
RASPPPoE.sys raspptp.sys raspti.sys rdbss.sys system32\drivers\rdpcdd.sys
Redbook.sys Rtlnicxp.sys s24trans.sys SCSIPORT. SYS spzx.sys
SR.sys srv.sys swenum.sys SynTP.sys StarOpen.SYS
Sysaudio.sys tandpl.sys tcpip.sys TDI. SYS termdd.sys
Update.sys USBD. SYS usbehci.sys usbhub.sys USBPORT. SYS
USBSTOR. SYS usbuhci.sys vga.sys VIDEOPRT. SYS VolSnap.sys
w39n51.sys watchdog.sys wdmaud.sys win32k.sys wanarp.sys
WMILIB. SYS
Product identification: DVDRAM GMA-4082N
Production revision level: HV02
Location: atapi, Port 1, Bus 0, Target 0, Lun 0
Support recording method: DAO, RAW SAO, RAW SAO + SUB, RAW DAO (96), TAO, DAO DVD
BURN-free technology: BURN-Proof
Auto-select best write speed: not supported
-* Note: this information below is provided by the unit, it would be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)
Response data format: 02 h
CD - R read/write: Yes/Yes
CD - RW read/write: Yes/Yes
Reading CD - R fixed Packet: Yes
Write test: Yes
Read DVD-ROM: Yes
DVD-R read/write: Yes/Yes
DVD-RAM read/write: Yes/Yes
Audio playback: Yes
Composite Audio and video data streams: No.
Digital output (IEC958) on port 1 supported: No.
Digital output (IEC958) on port 2 support: No.
Mode 1 form 2: Yes
Mode 2 form 2: Yes
Multisession: Yes
BUF: Yes
CD-DA commands supported: Yes
CD-DA Stream is accurate: Yes
R - W supported: No.
R W-interlaced and answer key: No.
C2 pointers Support: Yes
Taken ISRC supported: Yes
Taken UPC supported: Yes
Read Bar Code: No.
Lock media into the drive: Yes
Currently drive LOCK state: unlocked
Prevent jumper: No.
Eject command: Yes
Separate volume levels: Yes
Separate channel mute: Yes
Changer supports the drives present: No.
Software slot selection: No.
Side able change: No.
P to W of introductory part: Yes
Type: File ISO Standard image
Path: C:\Documents and Settings\Rhissa Harouna\Mes documents\
Name: PANDORA.iso
Size: 1927,75 MB
Session: 1
Track: 1
Track 01: DVD, number of sectors: 987008 (1.88 GB), address: 000000
The timestamp of the log file: 2009-04-06 17:09:38
17:09:38 info processor: Genuine Intel(r) CPU T1300 @ 1.66 GHz (1657 MHz)
17:09:38 MEDIA by memory available to Windows: 1.038.384 KB
17:09:38 not enough memory! Adjust the size of the memory buffer à * 256 MB.
17:09:38 image file of reading from: C:\Documents and Settings\Rhissa Harouna\Mes documents\PANDORA.iso
17:09:38 DVD Source Info: Session: 1, track: 1, number of sectors: 1.88 GB / 987008
17:09:55 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0): MEDIA by method of writing / speed)
17:09:55 helio - DAO - 8.0 X (11080 KB/s)
(D) HL-DT-ST DVDRAM GMA-4082N(1:0) - media format: DVD-R
17:10:16 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0) - [write ERROR] LBA: 0, length: 32)
S:key 03/0 C / 00 - "Write Error".
17:10:16 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0): is burning failed e!)
17:10:16 error message [03/0c/00] - write error
17:10:16 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0): is burning failed e!)
17:10:16 conference of the e cancelled © image file!
17:10:19 an error occurred during the procedure of burning!
Please consult the register and report the errors to technical support.
http://support.Microsoft.com/kb/314060Maybe you are looking for