Re: C510 black eStation ink cartridge work do not

Similar Questions

• Ink cartridge missing or not detected

  I feel as usual.  I went to another sheet of printing, and it came on my printer.  "Ink cartridge missing or not detected".  Earlier today, I put in a new black ink cartridge.  I took out and the color one, again no change.  I connected the printer to the front and back, waited, plugged back without success.

  I don't know what is the cause and I'm not very irritable with computers.  I thought to change color ink, but he is looking fine on the papers that I printed.   Help, please.  The printer is older, but I take care of it and have never had a problem until now.  It is a HP Photosmart C4240 all-in-one.

  Thank you!

  Nevermind I found the answer.  I copy the information because it worked!

  I found this video very useful.

  The steps are also listed below

  1. press the button and the button cancel at the same time.

  2. you will be asked to enter a special code press the blue button, green button and the grey button (in that order, one after the other).

  3. press the grey button until the Menu "information".

  4. press the green button.

  5. press on the gray button until you reach checksum to lock new data entry.

  6. press the green button and wait a certain number to appear. It will be a random number and is not important beyond his generation.

  7. press the button cancel three times to exit.

  8. try the print message should be gone.

  I hope this helps. I know that it's my YAY!

• Black ink cartridge print do not. All-in-one 6500 e709n, windows 7 64

  Black ink cartridge not printing not tried currently displayed responses including soak the print head.  The only check that I'm not sure of the vent hole is.  I see not a magnifying glass, or hole to put the needle find.  Tape has been removed.  Tried to blow into the cartridge to see if the ink out of the top of the cartridge - no luck.

  Troubleshooting the e709n print quality problems

  If you have followed all the steps to solve this problem of print quality and tried the solution of soaking the print head, then at this point so there are 2 options.

  (1) replace the print head.  The printhead can be ordered from the HP parts store using the CN643a part number.  I'll give you a link to the following HP parts store.

  HP parts store

  (2) replace the printer.  Sometimes, it may be cheaper in the long run to replace the printer with a new one, because the new unit will be delivered with the latest updates in technology and a new guarantee.

  I hope this helps.

• I bought HP 564XL black of ink, cartridges, how to make them fit in the printer C310a?

  Recently I bought HP 564XL black ink cartridges for my printer Photosmart C310a as they had to be compatible but the cartridge is too wide to fit.  They do a different medium for the largest ink cartridges?

  The standard black cartridge for Photosmart C310a is physically the same size as the 564xl. There are 2 black cartridges in the C310a. One on the far left of the printhead is the black of the Photo and that of the extreme right is the ordinary black.

  Are you making sure to put the black cartridge on the inside right side of the print head? For more information, see the documentation provided here.

  I hope this helps.

• HP 6500 Office jet E709a - black HP 920 cartridge printer does not

  My blck ink is not, the Panel indicates that it is about 2/3 full. But it does not print anything in black. I turned the printer off and back and I remmoved the ink cartridge and put it again. I don't know what else to do.

  In this post troubleshooting steps can help solve the black not printing in printers with inks separate (one for each color) and removable heads.

  In some cases, it may seem that the black is not printing, but it may appear in the pages of test or when the brilliant media is selected in the driver.  Black pigmented, used in most HP inkjet printers is not compatible with the glossy media.  When brilliant media is selected, the printer will use color to render black areas.  [A similar process is used in the pages of diagnostics of some printers.  [So that the information can be read, even if some colors or black don't work.]  If in a pinch, you need to print in black you see acceptable temporary results by changing the driver settings to select the glossy photo paper.

  To address the underlying issue of clogged print head black, the following may help: first check the vents of the ink cartridge is properly erased as shown in the fourth Solution here.

  1. Figure: Area of wind

• Ink cartridge # 99 does not fit into the printer, only #97 will fit

  Hello, I tried to install the print cartridge # 99 and he doesn't, oddly enough the # 97 cartridge fits very well.  It seems the line (party at the top of the cartridge Bay won't let me install the cartridge, as the #97 the manual for my HP 6540 has said that I can use this cartridge # 99 photos improved.   Help, please

  Darryl Arenson

  Hello

  The 99 Photo ink cartridge cannot be inserted at the location of the left as the 97 color ink cartridge.

  In order to use a Photo cartridge, keep the 97 color cartridge in the left location, remove the black print cartridge and insert the Photo cartridge instead of on the right...

  As the manual on page 36 list, the Photo cartridge must be used on the cradle of law:

  To install the print photo, remove the cartridge of the printer black inkcartridge,
  then to install the photo print cartridge in the compartment to the right of printing
  the cartridge cradle.

  Shlomi

• new yellow ink cartridge (564) do not correctly print Photosmart HP 7510 e-all-in-one

  My Hp Photosmart 7510 e - all - in - one... I replaced the yellow cartridge XL 564 and I am getting yellow streaks... when printing a report, yellow is barely noticeable, with black stripes.

  Is this a faulty new cartridge?  Help, please!

  Carol

  DUH!   A senior moment here... I pulled out the yellow ink cartridge replaced by another new... at that moment, I realized the orange tab 'pull' was still attached.   Once I got his shot and re - insert the cartridge, it was fixed!

• HP Photosmart Plus B210 Series new magenta ink cartridge prints do not at all

  First of all, I had a problem with my cyan ink on my printer HP Photosmart B210 series. The problem was that he was not the impression and he says it wasn't printing because of the cartridge and also I had to align my cartridges. Whenever I tried to align the cartridges he says that alignment does not so I ended up trying to align them so much that I have exhausted all my ink and went out to buy all new cartridges.

  When I installed new cartridges and tried to line up once again, they all worked perfectly, but when I went to print a photo, the magenta was not yet appear. I did another test called 'Print diagnostic Information' and the magenta box is completely blank 100%. When I went to see the "estimated ink levels" he said it was perfectly fine. I tried to print a picture of a square while magenta box and the printed page was completely empty.

  Basically... How can I get my printer to recognize the new magenta cartridge because it is not currently.

  I'd say running up to three cycles of cleaning the printer before driver or Panel box tools.  If this doesn't get the magenta, then you can try soak the print head, as described here.

  [edit] Know that the ink gauge is probably not at this point clear - especially the printer like that it has printed pages of magenta at this stage, while the ink is still in the cartridge.  The ink gauge will indicate less ink cartridges is actaully available.

• Branch HP4500 black new ink cartridge does not work

  I have the HP Officejet 4500 series printer. When I repaled branch HP 901 black cartridge is new, the alignment page went without black, undetected illustrated message text. I went through all the step to check the ink level, to clean the print head, troubleshooting... .but was frustrated. The b & w document print at all. Please advice. Thank you very much.

  What is the warranty ends on the day on the cartridge? (AAAA/MM/JJ) If it is under warranty I had advice contact our telephone support HP...

  

• 61 Twin inkjet cartridge black: new ink cartridge not working not

  I bought a pack of twin HP 61 ink about 2 months ago.  I went to use the second cartridge, and it did not work.  I have another bought from a dealer and found it works very well.  I wonder what HP can do for us since I wasn't able to use the second cartridge.  I have the package with any information you may need to identify it.

  In the paper here troubleshooting steps can help solve the cartrdige 61 does not.  If this does not solve the problem check the warranty (on the lower back right side of the package, or as found on the cartrdige as shown in this document).

• photossmart 5514 black HP ink cartridge does not print

  My photosmart 5514 no black ink will print.  tried the suggested cleaning the print head, but it still won't work.

  http://www.YouTube.com/watch?v=6OjJDeRuJ10

  has worked like a charm

• Black original ink cartridge HP 27 won't crack of HP Deskjet 3520

  The shop said it was compatible. However, the slot is smaller than the cartridge.

  There are two printers with this number, but one is called the Deskjet 3520 e-all-in-one who takes ink 564.

  The oldest 3520 takes ink 27.

  

• All-in-one Photosmart HP 7510: Photosmart 7510 - black ink cartridge print does not, but the tests are very well

  All the test prints are very good.  I have cleaned the print heads, broken cartridges.  I just replaced all the yesterday.

  Today, I can't print black.  The documents are great dimmed or blank pages come out.  I use a MacBook 2007, 10.6.8.  What else do you need to know?

  Thanks in advance!

  Hey @jas493,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I see you have a recurring problem of print quality with your HP Photosmart 7510 e-all-in-one printer.  I want to help you with this.

  What you describe, it seems that you tried all HP recommended troubleshooting steps.  Fortunately, given that your printer has a removable printhead, there are some other steps you can take to address the issue:

  Check the status of print head warranty

   

• A cartridge work do not on Photosmart C310A

  Replace the cartridge yellow on C310a, yellow will not print, but others do. No error message, run diagnosis test, head alignment, clean cartridges. A cartridge back to store and exchanged for the nine.  Still will not print. Everything is loaded correctly. What should do?

  Were you able to clean the printheads clvkp?

• Always printing black ink cartridge is not after several clean using your own ink cartridges

  I have a HP Deskjet 3050 All in One J610 series printer.

  I use Windows XP.

  I'm a Newbie as HP printers are concerned, but some have experience troubleshooting former HP model a parent.

  The black cartridge is not printing.   For various reasons, I have not used the printer for about two months.  So far, the printer worked fine, and in fact it is still using the cartridges that came with the printer.  I mention these points here because I realize or the other or both can be part of the issue.

  When I sent a document to the printer, printing was uneven.  I checked ink levels and black and color cartridges were about the third two full (before I used the print head cleaning utility.

  After cleaning the printheads, I tried again and this time the impression was the same, but in a shade of light blue, which was very low.  However, the original document is in a police man and a shade of gray, so perhaps he used ink cartridge color and not black?

  Research using the viewer help from HP does not help because it implies that you don't know how to locate the ink cartridge Clean Utility.

  After searching on Google to match the questions, I tried a second and then a third level of cleaning.  And because a post mentioned have to do eight times, I did a little more luck.  When the page is printed at the end of the cleaning cycle, the colors come out crisp and even.  There is no black bloc... is there?  I can't find an image showing a what print perfect following cleaning should look like.

  Additional to clean using the utility attempts do not seem to have worked and could even have been counterproductive because when I tried to print another document, and this came out so pale that I first thought that it is a blank page.

  I used the utility to re-estimated ink levels and the color is always about two third full, while black has dropped a little down, but is still above half full.  There is a check/tick showing for black ink and color.

  Messages on similar questions suggest that the replacement of the cartridge does not solve the problem and that heads should be cleaned manually.

  Should I try to clean the heads manually?  Who was mentioned on the threads and even on the HP support but as another option for a very different model.   I watched some demos on You Tube, but they are for different models of HP, in which they remove the printheads and clean them in a solution provided in the trade which I think is available in the United Kingdom, or with water!

  I would be grateful for any advice as to whether I should remove the black cartridge and clean heads printing and, if so, if someone could point me to a link where this is illustrated step by step, video, or shown in the logical steps.

  In the meantime I'll go off and buy a new black cartridge, but if it's the heads need cleaning, I'll have to do anyway.

  Thanks for any advice you can give me!

  I would like to manually clean the contacts on the cartridges and the printer. The process is described for your model of printer in step 3 of this document here.  The rest of the document does not apply to your question, but it does a great job giving instructions step by step on the manual cleanup process and materials needed to use lists. Manual cleaning will help ensure that the accumulation of contacts is not the cause of the issue of the print quality that you are experiencing. I hope this helps.