Re: Can you use a Port with a Tecra A9/127 Replicator?

Similar Questions

• Can I use PC400 RAM with the Tecra A4 (Pentrium 750)

  Can I use PC400 RAM with the Tecra A4 (Pentrium 750), currently PC333 is mounted.

  Thank you

  I put t know if you can use but AFAIK Toshiba recommends using these modules on the Tecra A4:
  PC2700 256 MB (PA3311U - 2M 25)
  PC2700 512 MB (PA3312U - 2M 51)
  1024MO PC2700 (PA3313U-2M1G)

  Here are the modules of single channel 166 MHz DDR333/PC2700, DDR SDRAM, 200-pin SoDIMM.

• Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?

  Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?  How about studio flashes (Alien Bees)? I just sold my Canon gear and moved to Sony, but I need advice on how to trigger wireless flashes.  Thanks for any help you can provide.

  Larry

  LarryMarshall, Any Trigger of manual Radio should work.  Assistants of pocket or RadioPoppers.

  But there are a few problems with the 60 m.

  (1) it doesn't have a PC or a 1/8 port to connect directly to a Rec Radio of any brand.

  (2) you WILL NEED to buy or use a hot shoe with a PORT adapter... 1/8 according to the sync cable or PC you may already own.

  (3) you WILL NEED to 'Check' to 'ensure' that trigger the 60 m SHAFT is aligned with the center of contact your hotshoe adapter hot with a PORT... because some adapters won't online upward with the 60 m Flash... who fooled you into believing that it does not work.  When, in fact, it's just the PIN which is not aligning with ALL the hot shoe adapters.

  It will work... you just have to be careful... and know of the gatcha.

  The 60 m PUT claw is not fully compatible with all... hot shoe adapters and there that to do with how PUT 60 m flash foot aligns the trigger ROD.

  I triggered the 60 m in flash with RadioPoppers... in the manual... so, I know it works.

  It is, manual release of the waste of the 60 m flash TTL/HSS abilitys.    What is needed is for SONY to develop and deliver a Radio trigger Solution.  Which would be TTL/HSS and you allow to 'Control' the Flash too... from the camera.

  It is the power of a Flash of modern Radio System.

  Manual triggers are old school.

  p.s. the A7r/A7 can easily trigger flashes of Studio with Pocket Wizzards or RadioPoppers... or probably triggers of manual.    Just be careful if the brand you choose is reliable.

  Pocket wizzards and RadioPoppers were the choice of PRO for years.  Because they are reliable.

• Tecra S1 stops when you use the Port Replicator III

  Hello

  I ve you have a problem with a Tecra S1 Notebook and Port Replicator III. When I anchor the portable station, it turns off immediately. It doesn´t so serious I m in Windows or not. The same notebook works in a Port Replicator II without any problem. My first thought was, the Replicator III may be damaged, but I tried with an another Tecra S1 and it worked! Can someone help me with this?

  Thx a lot!

  Mathis

  Hello

  AFAIK that should not be any problem as Tecra can be used with the two PRs. The only thing I can recommend is to reinstall the Toshiba Mobile Extensions.

  Good bye

• How can I use a headset with Bravia BX300?

  Hello

  How can I use a headset with BRAVIA BX300?

  I inserted the headphones in white audio port on the left side of the TV. I also selected 'audio system' settings.

  But still its not working do not. How to make it work?

  Thank you.

  You can get headphones that connect wireless to the audio output of the TV, a buddy of mine has a game like this, the red/white taken in the transmitter.

• Can I use Satellite R630 with Netgear and Intel wireless display technology

  Dear all,

  I am a user of a Satellite R630-105 (processor i3 M350). I would use this laptop with Wi - Fi on my plasma on the wall display. Recently, I heard about Intel wireless display technology connected to the Netgear adapter as a possibility for wireless connection to the screen.

  Can I use my computer with this technology? If so, what is the process? If not, is there an alternative, using cable is very inconvenient. I'm at the beginner level.

  Thank you very much, to come.

  Peter

  > I would like to use this laptop with Wi - Fi on my plasma on the wall display.
  Can you please me for what purpose you need this connection?
  I mean what kind of data you want to transfer?
  With other words you do exactly?

• How can I use the AppleCare with replacements USA helmet in Israel?

  How can I use an AppleCare with replacements USA headphones for my iphone in Israel 6plus? Am I covered overseas?

  Technically, no. The warranty is valid only in the country where the phone was originally sold. However, that restriction is based on the differences between the models of phones sold in different countries and the availability of substitutes service. You may very well be able to get the headphones replaced here since there is no difference between those who were included in phones AND those that are included with the phones sold in your country. Make an appointment at the genius bar or take it to your local CENTER and see what they can do for you.

• can you use a deskjet 970cse in black only mode when the color cartridge dries up

  can you use a deskjet 970cse in black only mode when the color cartridge dries up? Thank you, Jerry

  banhien information is very accurate. I would just add a bit of it. Because this printer uses a tricolor cartridge and a black, it should be one of the printers that will print with just the black cartridge installed. It is called print in backup mode. I should happen automatically when you remove the color cartridge and try printing. A message will arrive on the printer or the computer and ask you if you want to print in backup mode. Say yes, and it should let you print. Hope that helps.

• Can I use a different with my HP Pavilion 17 19v PSU

  Can I use a different with my HP Pavilion 17 19v PSU?

  You have the adapter 45 watts:

  45 W HP Smart AC adapter (NFPC, RC, 3-wire, 4.5 mm, nslim) 741727-001

  A card eBay auction:

  http://www.eBay.com/ITM/original-OEM-HP-45W-smart-cord-charger-Chromebook-14-c011nr-741727-001-notebook-/221431899726

  The connector dimensions: 4.5 mm × 3.0 mm, with pin inside

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Can we use emulator ripple with visual studio?

  Hi friend

  How can we use emulator ripple with visual studio?

  Thanks in advance,

  Faster

  You can use ripple with Visual Studio...

  What I do is to create a directory on my machine that has my application in it, then go into Visual Studio and select: «File-> Open-> Web Site...» »

  Then I browse and select the directory where I created my app.  It will then open this directory as a Web site in Visual Studio.

  When I want to run and debug my application, I press "start without debugging".  This will launch the ASP.NET development for the project server so that I can type in the URL.

  I then open the URL in the ripple.  I can just edit the files in Visual Studio, then press refresh (F5) in waving to refresh the content of my application.

• Can I use a cartridge with extra flat 564 black ' photo' in a HP Photosmart B110a? Perth, Australia

  Can I use a cartridge with extra flat 564 black ' photo' in a HP Photosmart B110a? Perth, Australia

  No, you can't use a Photo cartridge instead a black cartridge. Photo black and black are not the same and that they are not interchangeable. Here a link to a document that I site the prior statement which also goes to explain why the photo cartridges have been renamed and the differences in the picture and Black cartridges. I hope this helps.

• Can you use the settings in win 7 If you switch to xp?

  Win 7 for win xp

  Can you use the settings in win 7 If you switch to xp?

  Thank you guys so much... I don't really know my question... but with these answers that you have provided me, I think I know what to do!

  You never mentioned anything on dual boot Windows 7 and XP in your question, which mentioned the other contributor.

  If you consider the above here are easy to follow Guides.

  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  SECOND OPTION

  When Windows 7 is installed first

  Warning

  • If you have a RAID configuration, you will need to have the XP RAID drivers for your specific motherboard on a floppy disk to select and load the F6 during the XP installation prompt .
  • If you have a SATA drive, then you will need to do one of the following options to load the drivers for XP SATA for your specific motherboard.
    • How to Slipstream SATA drivers in the installation CD of Windows XP with Dual Boot of Windows 7 or Vista
    • How to load the SATA drivers in the installation of Windows XP on your PC from Dual Boot with Vista or Windows 7 to find out how to load your SATA drivers from a floppy at the F6 prompt while installing XP.

  1. to create a new Partition on hard drive Windows 7
  NOTE: If you want to install XP on a separate internal hard drive instead, then skip this step and go to step 2.

  (A) in Windows 7, select and reduce the volume of Windows 7 in how disk management MB (1024 MB = 1 GB) you want to have the XP partition. (See screenshots below)
  NOTE: Would you do a method at this link.

  

  

  

  2. insert your XP installation disc, and then restart the computer and press any key to start from when you are prompted. (See screenshot below)
  NOTE: Ensure that the CD/DVD drive is selected first in the boot order in the BIOS.

  

  3 XP installation, press enter. (See screenshot below)

  Warning

  • If you have a RAID configuration, you will need to have the RAID of XP drivers for your specific motherboard on a floppy disk to select and load the F6 during the XP installation prompt .
  • If you have a SATA drive, then you will need to do one of the following options to load the SATA for XP drivers for your specific motherboard.
    • How to Slipstream SATA drivers in the installation CD of Windows XP with Dual Boot of Windows 7 or Vista
    • How to load the SATA drivers in the installation of Windows XP on your PC from Dual Boot with Vista or Windows 7 to find out how to load your SATA drivers from a floppy at the F6 prompt while installing XP.

  

  4. press F8. (See screenshot below)
  NOTE: On some multimedia keyboards you need to maybe press the F-Lock or key function before you press F8.

  

  5. select (step 1) partition or hard drive that you want to install XP on the help of the arrow keys and press ENTER.

  

  6 the installation of XP.

  Tip

  If you get the error loading operating system after XP is restarted:

  • Using your Windows 7 installation disc, start at the prompt at startup.
  • Type these commands below, and then press ENTER after each one.
    • Bootrec /FixMbr
    • Bootrec /FixBoot
    • Bootrec /RebuildBcd
  • Exit command prompt and restart the computer.
  • At this point, Windows 7 should start up in the same way before you try to install XP.
  • Go to step 8 below and run EasyBCD in Windows 7 instead.

  7 under XP, download and install .Net Framework 2.0 (32-bit) version or .Net Framework 2.0 (64-bit) version first and EasyBCD (free version) for your (x 86) 32-bit or 64-bit (x 86) XP.
  NOTE: In XP, Net Framework must be installed to run EasyBCD. Only 'free download for limited and non-commercial use downstairs' or 'Older Versions' to the right are free to EasyBCD. Registration is not required to download EasyBCD.

  8 run EasyBCD (free version).
  NOTE: This is necessary to fix the Windows 7 boot file and add to the list of Windows XP boot manager.

  9 on the left side of EasyBCD, click on the button Add a new entry . (See screenshot below)

  (A) in the upper part under operating system, click the Windows (see screenshot below)

  (B) to the right of Type, select Windows NT/2 k/XP/2 k 3 in the menu drop-down. (See screenshot below)

  
  WARNING: Don't forget to leave the box checked automatically detect the correct drive .

  (C) to the right of the name, you can leave the default value of Microsoft Windows XP under the name to display in the Windows Boot Manager, or you can type any name , you do not want to have instead. (See screenshot below)

  (D) click thedd entry has. (See screenshot below)

  

  10 on the left side of EasyBCD, click the Deployment of BCD , select (dot) the option install the bootloader of Windows Vista/7 on MBR and click Write MBR . (See screenshot below)

  

  11 closing EasyBCD.

  12 restart the computer to be able to boot from Microsoft Windows XP or Windows 7. (See screenshot below)

  

  Tip

  If Windows 7 does not start when selected, use the Windows 7 installation DVD to do a Startup Repair.

  That's it,

  See you soon.

• can I use service Pack3 with Augsburg cloud

  can I use service Pack3 with Augsburg cloud

  With a few exceptions, you need Windows 7 or 8 to use the Creative Cloud software.

  See Tech CC for more details:

  http://www.Adobe.com/products/creativecloud/tech-specs.html

  If you do not have the min requirements for CC, you can probably use (also available on the cloud) CS6.

  Nancy O.

• can I use my 11 with my first 10 items

  Can I use my 11 with my first 10 items

  They will operate as separate but applications will not be integrated through the organizer and you will not be able to output directly from PSE to PRE for example when creating a slide show.

• Can I use Word 2008 with el Capitan upgrade?

  Can I use Word 2008 with el Capitan upgrade?

  Yes.

  (139497)