Re-configuration clusterware on RAC node

Hi friends,

Version of the OS: AIX 7.1

DB version: 11.2.0.4 RAC with 2 nodes

Recently, we build a server CAR (which is yet to go live) with 2 nodes. When the creation of diskgroup, one of my colleagues, s/n s by wrong used rootvg like diskgroup. Of course, later he dropped that. But the disk header has been corrupted that ASM has tried to use it.

Clusterware and RDBMS is made in the separate file system, and it is in good condition.

/ OraHome

Yesterday, the storage team cloned 2nd rootvg from node to node 1. Now, as the clusterware and RDBMS facilities remained intact on the 1st node, is anyway we can to new re - configure CRS etc. on node 1 and join in cluster?

If possible, please provide a link or define steps how we can do it. Thanks in advance

Pavan DBA wrote:

Hi friends,

Version of the OS: AIX 7.1

DB version: 11.2.0.4 RAC with 2 nodes

Recently, we build a server CAR (which is yet to go live) with 2 nodes. When the creation of diskgroup, one of my colleagues, s/n s by wrong used rootvg like diskgroup. Of course, later he dropped that. But the disk header has been corrupted that ASM has tried to use it.

Clusterware and RDBMS is made in the separate file system, and it is in good condition.

/ OraHome

Yesterday, the storage team cloned 2nd rootvg from node to node 1. Now, as the clusterware and RDBMS facilities remained intact on the 1st node, is anyway we can to new re - configure CRS etc. on node 1 and join in cluster?

If possible, please provide a link or define steps how we can do it. Thanks in advance

You can run, as ROOT, $GI rootcrs.pl / src / / installation folder. This would remove the Setup on node 1 and you would be able to run the new root.sh which would reconfigure the CRS on node1.

HTH

Aman...

Tags: Database

Similar Questions

  • RAC node down for a month

    Hi all

    I have the data base RAC with two nodes that is a copy of the Production database which purpose QA.

    There were a few problems that took two weeks to be resolved and since then there is a node running and active and the other is down for 1 month.

    Since it is QA we had no need of SLA and issues have been fixed when we had time to work on it.

    Before you start the RAC node that is down I would like to know if I need to take care of something before you start the node that is down for a month.

    Or if I need to make a correction.

    I'd appreciate any comments.

    Thanks in advance

    KZ

    If the remaining node went unchanged, so you can start the node to the ground with no problems... a minute, a day or a month, it's okay.

    The biggest challenge over such a long period of time is to make sure that someone does not have configuration changes to the top node. You don't want to apply the patches of OS or Oracle patches. This can complicate things when the other node comes back upward.

    See you soon,.

    Brian

  • Sleeping Sync Application with 2 RAC node after migration of DB level

    Dear all,

    I migrated my level of database - 11.2.0.3 of single node (file system) to node 2 RAC - 11.2.0.3 (ASM disk group). Now I want to configure my APPS (R12.1.3) level with node 2 RAC, but I wonder how it do?
    I am also to add a node more to inorder of application level to set up PCP and DNS load balancing.

    I already applied patches of pre-required on the Application tier before migrating to the 2-node RAC database layer.
    1. oracle E-Business Suite Release 12.1.1 Maintenance Pack Patch 7303030
    2 AutoConfig, apply R12. T2K. B.Delta 3 Patch 8919489
    3 9926448 patch to fix the known problem with FND_FS/SM alias generation with ANALYSIS is enabled.
    4 ANALYZE the functionality of automatic configuration of the receiver, apply either R12. T2K. B.Delta 3 [Patch 8919489] and R12. ATG_PF. B.Delta.3 [Patch 8919491], or 12.1.3 [Patch 9239090]

    I did the DB migration as core practice DBA. My level of DB is now on node 2 CARS. And the Application Tier (single node) is still the same old server... need to synchronize with the 2 RAC node and add the additional Application layer node so that the CFP and DNS can be configured.

    Please suggest.

    Kind regards
    Aleem

    Aleem,

    You see errors in the log database file after the database is started and before you access the application?

    Can you drop the temp tablespace and create a new one and see if you get the same error?

    Please see the following documents.

    Bug 9414040 - at the RAC, a temporary file can be used until it is finished creation (ORA-1157) [ID 9414040.8]

    Getting ORA-01157: cannot NOT IDENTIFY/LOCK DATA FILE 37 when datafile is in ASM [978335.1 ID]

    Thank you

    Hussein

  • How are RAC nodes linked in a virtual environment?

    Oracle version: 11.2
    SE host: Windows 7
    Guest operating system: Solaris 10
    Virtualization software: VMWare Workstation 8

    I think to set up a node 2 CARS with storage in an openfiler VM virtual machines.

    I have a very basic question about networking.

    In the real world, the machines are connected by physical cables on the switches... etc. But in a virtual world, how are the virtual computers connected to each other.

    For example:
    For the private interconnect, how is network adapters on 2 nodes connected. Are they "connected" automatically when
    We assign IPs in a separate subnet mask?


    If the separate subnet mask is the way to do that, should I allocate how subnet masks?
     255.255.255.0  ------> for Public Interface
     
     255.255.255.121 -----> for Private Interface (don't know if this is valid in Solaris or Linux)

    Hello

    For example:
    For the private interconnect, how is network adapters on 2 nodes connected. Are they "connected" automatically when
    We assign IPs in a separate subnet mask?

    For each virtual network in the virtual machine, VMWARE has a virtual card in a physical machine.

    In vmware physical machine to create a new virtual adapter (for example host only), when you create a new virtual machine and add the network interface, you must associate the new interface of virtual machine to the virtual map of the physical machine.

    for example
    Physical machine - adapter-1 (host only)

    Machine virtual A: the eth0 Interface (using the ADAPTER-1)
    Machine virtual B: the eth0 Interface (using the ADAPTER-1)

    As the virtual machines are configured to use the same virtual map of the physical machine, it is as if they were in the same switch.

    If the separate subnet mask is the way to do that, should I allocate how subnet masks?

    255.255.255.0  ------> for Public Interface
    
    255.255.255.121 -----> for Private Interface (don't know if this is valid in Solaris or Linux)
    

    No problem, it is transparent, you can configure your virtual machine interface as you would in physical env.

    See this thread.
    Re: Create RAC nodes on VM Ware workstation; NIC issue

    Kind regards
    Levi Pereira

  • Creation of RAC nodes on VM Ware workstation; NIC issue

    DB version: 11 GR 2
    Guest operating system: Solaris 10 (August 2011 publication)
    SE host: Windows 7

    VM Ware workstation using 8, I am creating RAC nodes.
    For each node, I need two network cards
    NIC 1 ---- for public network (Plus VIP,SCAN)
    
    NIC 2 ----- for private network (Interconnect)
    For the configuration of network adapter, VM has the following choices

    1 bridged
    2 NAT
    3 host-Only
    4 custom: specific virtual network

    These options are important for the creation of Public/private NETWORK card? If so, which one should I choose for NIC1 and NIC2?

    Hello

    For the configuration of network adapter, VM has the following choices

    1 bridged

    Bridged mode it is commonly used, virtual machines can communicate fully with each verse outside through the host machine. Type of network connection between a virtual machine and the rest of the world. Under networking networking, a virtual machine appears as an additional computer on the same physical Ethernet network as host.

    2 NAT

    NAT is useful when you have a limited amount of IP addresses or are connected to the network via a non Ethernet network card. NAT works by NAT of the virtual machines in a private network of VMnet than the host machine. When a virtual machine sends a request to access a network resource, it appears as if the request came from the host machine to the network resource.

    3 host-Only

    Network invited only provides a network connection between the virtual machine and the host computer, using a virtual NIC which are visible by the host operating system. This approach can be useful if you need to set up an isolated virtual network.

    4 custom: specific virtual network

    Establishment of the network for your personalized virtual network components is a very simple process. Before attempting to implement complex virtual networks, you should have a good understanding of how to configure the network devices in your host operating system and guest.

    These options are important for the creation of Public/private NETWORK card? If so, which one should I choose for NIC1 and NIC2?
    NIC 1 - for the public network (more VIP, SCAN)

    Option 1

    Map NETWORK 2 - for private network (networking)

    Option 3 or 1 is recommended option 3, but none of these options will work.

    Hope this helps,
    Levi Pereira

  • License one RAC node

    Hi all
    We organize several licenses systems cars of the ERA. If we plan to spend the normal rac EE to the 'RAC ONE NŒUD.

    Can anyone tell me if the normal license to use rac ' rac a node "or we need the option ' rac a node?

    Thank you * T

    "RAC" cost about 25 k per CPU and the fact of "rac node" around 10, so the question is if we use "rac a node" instead of lets say "normal cars", we can use our current licence or should buy us new licenses.

    CARS and ONE NŒUD CCR are two options of DIFFERENT Oracle Database (such as advanced partitioning and security etc.), so if you use the CAR - you buy RAC, if you use a NŒUD CCR - you buy a CAR NŒUD.
    It's like you ask if we by partitioning option, we use advanced security? Of course not.

    The point is, BECAUSE ONE NŒUD offers the possibility to create a normal CARS only 30 minutes (for moving users from one node to another), so that's why it is less expensive than normal CARS.

    Best regards
    Gennady

  • Unable to connect to the database 10 g 2 2 RAC nodes?

    Hi all
    I installed 2 RAC nodes with 10gr 2 on Linux, and 'crs_stat t' show me all services is online.
    The service name is RACDB, 1 RACDB1 node names, node names 2 RACDB2.

    Node 1 I can connect with "sqlplus system/passwd@racdb", "sqlplus system/passwd@racdb1."
    but I'm not "sqlplus / as sysdba.

    I'm new to RAC, a knowledge how to solve?

    Thank you

    Re...
    check the case...

    :~> export ORACLE_SID = TEST1
    :~> sqlplus / as sysdba

    SQL * more: Release 10.2.0.4.0 - Production on Wed Oct 28 15:33:34 2009

    Copyright (c) 1982, 2007, Oracle. All rights reserved.

    Connect to an instance is idle.

    SQL > exit
    Disconnected
    :~> export ORACLE_SID = test1
    :~> sqlplus / as sysdba

    SQL * more: Release 10.2.0.4.0 - Production on Wed Oct 28 15:33:49 2009

    Copyright (c) 1982, 2007, Oracle. All rights reserved.

    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
    With the partitioning, Real Application Clusters, OLAP, data mining
    and Real Application Testing options

    SQL > exit

  • Why the RAC node link a virtual IP address of a cluster server?

    We have a RAC 4 nodes 10.2.0.3, who has had only one node powered off for a few weeks. We notice that the VIP of inactive node appears in the ifconfig of node 1, linked on eth0:2. Yesterday, I removed it using delete ifconfig on eth0:2. I checked in ifconfig and, indeed, the link was gone. When three other RAC nodes rebounded last night the VIP associated with the other server had, and more. How? Why?

    Published by: SteveInTallyFl on April 16, 2009 16:14 for more specificity.

    Hello

    It is quite a thread on this topic:
    Re: VIP does not bind PORT on other nodes, when I node 1

    Thank you
    Markus

  • ANALYZING listener 11 GR 2 and AMT DataGuard configuration for RAC nodes

    By oracle paper MAA for 11 GR 1 material to configure Oracle Networking, they recommend to configure listener_hostname on each host (2 Guest CARS on primary, 2 Guest CARS standby in standby mode). Like Listener_europa, Listener_callisto, Listener_dione, Listener_hyperion.

    I installed two primary databases grid/oracle RAC and now try to configure both nodes to backup CARS. I couldn't find any documents on how to configure the network files. 3 SCAN listeners were now configured and running on the main nodes of the rac.

    so the configuration of listner.ora, how to set up listner_hostname? or should I use scan listener?

    Can someone tell me exactly how I can configure tns entries in such situation?

    Thank you

    Hello;

    So I think Yes 10 5 (per node) If you have two.

    See the document Oracle B28282-02

    2.6.4.6 use of standby Redo Logs and configure the appropriate size

    Best regards

    mseberg

  • root.sh failed on rac node problem grid infrastructure 11 GR 2

    Hi all


    I am about to install 11 g (11.2.0.1) grid infrastructure on Linux racnode1.orasol.com 2.6.18 - 128.el5PAE #1 SMP Wed Jan 21 08:28:04 EDT 2009 i686 i686 i386 GNU/Linux 32-bit where I use the platform VMware VMware 10 of 2008. I'm sure I followed the installation instructions, but I can't get rid of the following error that occurs while I run the root.sh script. on the first node.

    Maybe this is a known problem or can anyone request includes what grid infrastructure. Thanks for any effort.


    [root@racnode1 OraInstall2014-03-15_02-12-11 PM] # /u01/app/11.2.0/grid/root.sh

    Run the script root.sh from Oracle 11 g...

    The following environment variables are defined as:

    ORACLE_OWNER = ora11g

    ORACLE_HOME = /u01/app/11.2.0/grid

    Enter the full path of the local bin directory: [/ usr/local/bin]:

    Copying dbhome to usr...

    Copying oraenv to usr...

    Copying coraenv to usr...

    Creating/etc/oratab file...

    Entries will be added to the/etc/oratab file according to the needs of

    Assistant configuration database when a database is created

    Finished to turn the generic part of the root.sh script.

    Now root product-specific actions will be performed.

    2014-03-15 15:39:58: the analysis of the host name

    2014-03-15 15:39:58: verification of superuser privileges

    2014-03-15 15:39:58: user has superuser privileges

    The file of configuration settings using: /u01/app/11.2.0/grid/crs/install/crsconfig_params

    Create the trace directory

    ADD LOCAL MODE

    Creating OCR keys for the user "root", "root"... privgrp

    Successful operation.

    portfolio of root

    root cert portfolio

    export certificate root

    portfolio for peer

    Pocket player profile

    portfolio of PA

    portfolio peer keys

    portfolio PA keys

    cert request peer

    PA cert request

    CERT peer

    CERT PA

    peer TP root cert

    CERT of profile TP root drive

    PA TP root cert

    CERT of peers pa TP

    CERT of peers PA TP

    CERT of pa TP player profile

    profile peer player TP CERT

    CERT user peer

    CERT user PA

    Adding to inittab demon

    CRS-4123: Oracle high availability Services started.

    starts ohasd

    CRS-2672: attempt to start 'ora.gipcd' on 'racnode1 '.

    CRS-2672: attempt to start 'ora.mdnsd' on 'racnode1 '.

    CRS-2676: beginning of 'ora.mdnsd', 'racnode1' succeeded

    CRS-2676: beginning of 'ora.gipcd', 'racnode1' succeeded

    CRS-2672: attempt to start 'ora.gpnpd' on 'racnode1 '.

    CRS-2676: beginning of 'ora.gpnpd', 'racnode1' succeeded

    CRS-2672: attempt to start 'ora.cssdmonitor' on 'racnode1 '.

    CRS-2676: beginning of 'ora.cssdmonitor', 'racnode1' succeeded

    CRS-2672: attempt to start 'ora.cssd' on 'racnode1 '.

    CRS-2672: attempt to start 'ora.diskmon' on 'racnode1 '.

    CRS-2676: beginning of 'ora.diskmon', 'racnode1' succeeded

    CRS-2676: beginning of 'ora.cssd', 'racnode1' succeeded

    CRS-2672: attempt to start 'ora.ctssd' on 'racnode1 '.

    CRS-2676: beginning of 'ora.ctssd', 'racnode1' succeeded

    ASM created and launched successfully.

    DATA DiskGroup created successfully.

    clscfg:-install the specified mode

    Successfully accumulated necessary OCR keys.

    Creating OCR keys for the user "root", "root"... privgrp

    Successful operation.

    CRS-2672: attempt to start 'ora.crsd' on 'racnode1 '.

    CRS-2676: beginning of 'ora.crsd', 'racnode1' succeeded

    CRS-4256: profile update

    Successfully added to disk 88720477d0534f9fbf3b74c2f0ac8b46 to vote.

    Managed to replace voting disk group with + DATA.

    CRS-4256: profile update

    CRS-4266: Vote or managed to replace the files

    # File group universal name Id disk STATE file

    --  -----    -----------------                --------- ---------

    1. online 88720477d0534f9fbf3b74c2f0ac8b46 (/ dev/oracleasm/disks/ASMDISK1) [DATA]

    Located at 1 vote (s) disk.

    CRS-2673: attempt to stop 'ora.crsd' on 'racnode1 '.

    CRS-2677: stop 'ora.crsd' on 'racnode1' succeeded

    CRS-2673: attempt to stop 'ora.asm' on 'racnode1 '.

    CRS-2677: stop 'ora.asm' on 'racnode1' succeeded

    CRS-2673: attempt to stop 'ora.ctssd' on 'racnode1 '.

    CRS-2677: stop 'ora.ctssd' on 'racnode1' succeeded

    CRS-2673: attempt to stop 'ora.cssdmonitor' on 'racnode1 '.

    CRS-2677: stop 'ora.cssdmonitor' on 'racnode1' succeeded

    CRS-2673: attempt to stop 'ora.cssd' on 'racnode1 '.

    CRS-2677: stop 'ora.cssd' on 'racnode1' succeeded

    CRS-2673: attempt to stop 'ora.gpnpd' on 'racnode1 '.

    CRS-2677: stop 'ora.gpnpd' on 'racnode1' succeeded

    CRS-2673: attempt to stop 'ora.gipcd' on 'racnode1 '.

    CRS-2677: stop 'ora.gipcd' on 'racnode1' succeeded

    CRS-2673: attempt to stop 'ora.mdnsd' on 'racnode1 '.

    CRS-2677: stop 'ora.mdnsd' on 'racnode1' succeeded

    CRS-2672: attempt to start 'ora.mdnsd' on 'racnode1 '.

    CRS-2676: beginning of 'ora.mdnsd', 'racnode1' succeeded

    CRS-2672: attempt to start 'ora.gipcd' on 'racnode1 '.

    CRS-2676: beginning of 'ora.gipcd', 'racnode1' succeeded

    CRS-2672: attempt to start 'ora.gpnpd' on 'racnode1 '.

    CRS-2676: beginning of 'ora.gpnpd', 'racnode1' succeeded

    CRS-2672: attempt to start 'ora.cssdmonitor' on 'racnode1 '.

    CRS-2676: beginning of 'ora.cssdmonitor', 'racnode1' succeeded

    CRS-2672: attempt to start 'ora.cssd' on 'racnode1 '.

    CRS-2672: attempt to start 'ora.diskmon' on 'racnode1 '.

    CRS-2676: beginning of 'ora.diskmon', 'racnode1' succeeded

    CRS-2676: beginning of 'ora.cssd', 'racnode1' succeeded

    CRS-2672: attempt to start 'ora.ctssd' on 'racnode1 '.

    CRS-2676: beginning of 'ora.ctssd', 'racnode1' succeeded

    CRS-2672: attempt to start 'ora.asm' on 'racnode1 '.

    CRS-2676: beginning of 'ora.asm', 'racnode1' succeeded

    CRS-2672: attempt to start 'ora.crsd' on 'racnode1 '.

    CRS-2676: beginning of 'ora.crsd', 'racnode1' succeeded

    CRS-2672: attempt to start 'ora.evmd' on 'racnode1 '.

    CRS-2676: beginning of 'ora.evmd', 'racnode1' succeeded

    CRS-0184: unable to communicate with the demon of the CRS.

    RPRC-1070: could not verify if the ora.asm resource is registered

    Cannot communicate with crsd

    Add asm... failed

    clsr_start_dg returns error to loc: 70 rc = 0

    CRS-4535: cannot communicate with Cluster Ready Services

    CRS-4000: Create command has failed, or completed with errors.

    create diskgroup DATA... failed

    CRS-4535: cannot communicate with Cluster Ready Services

    CRS-4000: added command failed, or completed with errors.

    Return code of 1 (256) of control: /u01/app/11.2.0/grid/bin/crsctl add type basetype - files ora.local_resource.type-/u01/app/11.2.0/grid/crs/template/registry.acfs.type ora.registry.acfs.type

    Add ora.registry.acfs.type... failed

    RPRC-1070: could not verify if the ora.net1.network resource is registered

    Cannot communicate with crsd

    Add scan = rac - scan.orasol.com... failed

    Configure Grid Infrastructure for a Cluster Oracle... failed

    Update the inventory of properties for clusterware

    From Oracle Universal Installer...

    Check the swap space: must be greater than 500 MB.   Real 4996 MB passed

    The pointer of the inventory is to /etc/oraInst.loc

    The inventory is located at/u01/app/oraInventory

    'UpdateNodeList' succeeded.



    [root@racnode1 oraagent_ora11g] # cat oraagent_ora11g.log > > > > > > >

    Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.

    2014-03-22 22:04:43.702: [AGENT] [3045107408] ENV level Logging for Module: 1 AGENT

    2014-03-22 22:04:43.704: record level of ENV [AGENT] [3045107408] for the Module: AGFW 0

    2014-03-22 22:04:43.704: record level of ENV [AGENT] [3045107408] for the Module: CLSFRAME 0

    2014-03-22 22:04:43.704: record level of ENV [AGENT] [3045107408] for the Module: CLSVER 0

    2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: CLUCLS 0

    2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: COMMCRS 0

    2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: COMMNS 0

    2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: CRSAPP 0

    2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: CRSCCL 0

    2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: CRSCEVT 0

    2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: CRSCOMM 0

    2014-03-22 22:04:43.706: [AGENT] [3045107408] ENV level Logging for Module: CRSD 0

    2014-03-22 22:04:43.706: record level of ENV [AGENT] [3045107408] for the Module: CRSEVT 0

    2014-03-22 22:04:43.706: record level of ENV [AGENT] [3045107408] for the Module: CRSMAIN 0

    2014-03-22 22:04:43.706: record level of ENV [AGENT] [3045107408] for the Module: CRSOCR 0

    2014-03-22 22:04:43.706: [AGENT] [3045107408] ENV level Logging for Module: CRSPE 0

    2014-03-22 22:04:43.706: [AGENT] [3045107408] ENV level Logging for Module: CRSPLACE 0

    2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSRES 0

    2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSRPT 0

    2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSRTI 0

    2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSSE 0

    2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSSEC 0

    2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSTIMER 0

    2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSUI 0

    2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: CSSCLNT 0

    2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: OCRAPI 1

    2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: OCRASM 1

    2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: OCRCAC 1

    2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: OCRCLI 1

    2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: OCRMAS 1

    2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: OCRMSG 1

    2014-03-22 22:04:43.709: [AGENT] [3045107408] ENV level Logging for Module: OCROSD 1

    2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: OCRRAW 1

    2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: OCRSRV 1

    2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: OCRUTL 1

    2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: SuiteTes 1

    2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: UiServer 0

    2014-03-22 22:04:43.710: [AGFW] [3045107408] starting agent: /u01/app/11.2.0/grid/log/racnode1/agent/crsd/oraagent_ora11g/

    2014-03-22 22:04:43.711: framework Agent [AGENT] [3045107408] initialized, process Id = 6506

    2014-03-22 22:04:43.876: /u01/app/11.2.0/grid crsHome Utils::getCrsHome [USRTHRD] [3045107408]

    2014-03-22 22:04:43.878: [USRTHRD] [3045107408] Process::convertPidToString pid = 6506

    2014-03-22 22:04:43.884: [CLSFRAME] [3045107408] Inited lsf context 0xadf9fc8

    2014-03-22 22:04:43.885: [CLSFRAME] [3045107408] Initing CLS framework messaging

    2014-03-22 22:04:43.887: State of new framework [CLSFRAME] [3045107408]: 2

    2014-03-22 22:04:43.887: [CLSFRAME] [3045107408] M2M begins...

    2014-03-22 22:04:43.904: [CRSCOMM] [3045107408] m_pClscCtx = 0xadfccb8m_pUgblm = 0xae00318

    2014-03-22 22:04:43.905: [CRSCOMM] [3045107408] start send thread

    2014-03-22 22:04:43.907: [CRSCOMM] [3010943888] clsIpc: sendWork thread started.

    2014-03-22 22:04:44.325: clsc_connect [COMMCRS] [3044768656]: (0xaeeda00) no listener to (ADDRESS = (PROTOCOL = IPC) (KEY = CRSD_IPC_SOCKET_11))

    2014-03-22 22:04:44.326: [CRSCOMM] [3045107408] [FFAIL] failed to connect to (ADDRESS = (PROTOCOL = IPC) (KEY = CRSD_IPC_SOCKET_11)) ret = 9

    2014-03-22 22:04:44.326: [CLSFRAME] [3045107408] failure to the CPI to connect to the server: 2

    2014-03-22 22:04:44.326: [CLSFRAME] [3045107408] failed to start - intermodules comms: 1

    2014-03-22 22:04:44.330: [AGFW] [3045107408] alert creation: (: CRSAGF00120 :): Agent Framework could not be started: 1).

    2014-03-22 22:04:44.330: gipcShutdownF [GIPCXCPT] [3045107408]: jumping stop, count 1, of [clsnOraAgent.cpp: 82], ret gipcretSuccess (0)

    2014-03-22 22:04:44.339: [AGFW] [3045107408] Agent comes out with exit code: 1

    Hi Vandana,

    Thanks for your time.

    I commented the line on which the IP 127.0.0.1 is shown in/etc/hosts on all nodes.

    file/etc/hosts is same nodes.when I do a ping to the public ip address, it is show the IP local hots i'e 127.0.0.1 not the real that I craved in the file/etc/hosts.

    After that I comment that line of hole and he ping is resolved.

    Regrads,

    Malik Tanveer

  • RAC nodes on two different network segments, what can go wrong?

    Two-node RAC, what are the disadvantage if both nodes are on different network segments?
    So the two node will be have a public interface on different segment, but interconnection will be on the same segment.
    The two nodes have the same gateway and two network segments goes to the same switch.

    It's Solaris, Oracle 10 g (10.2.0.4)

    Hello

    Public IP addresses and virtual IP addresses must be in the same subnet.

    This is necessary because the VIP - IP (two nodes) should work on two public networks.

    Recently I've set up RAC extended with diferent networks (subnet). When all nodes is all that is very well. But when a node down, clusterware node gel survive because he trying vip - ip (different subnet) node configuration on the node down to survive.

    Kind regards
    Levi Pereira

  • DR for two RAC nodes

    Hello

    We have two node RAC on AIX. Version of the installed infrastructure 12 c software and there are two versions of (GR 11, 2 and 10g) databases are running. GPFS is used as filesystem shared in the primary circuit. Now we intend to stand-alone configuration standby for all databases.

    Please suggest if we need to install software of grid Infrastructure in DR side or we can go for only RDBMS software. Main site uses GPFS and if we use the GPFS DR side also.

    If it is perfectly correct then we can go ahead with normal file system DR.

    You can go ahead with normal file system.

    As DR site have the unique instance of database, so is NOT recommended using GPFS. On your particular case is recommended to use the operating system's file system.

  • How Oracle Clusterware Oracle RAC and 3rd-party Clustering with them

    I have some questions on how Oracle, Oracle RAC and 3rd party clustering CLusterware fit between them.

    Q1. My understanding is that the Infrastructure Grid Oracle Clusterware is Oracle's Clustering solution that allows applications to cluster? that is, it is a general clusterware solution to compete with those already on the market. Is this correct?

    Q2. So why CARS is necessary for the Oracle cluster databases? An Oracle database is not just considered one application like any other? So why can not just use you GI / Clusterware to gather what you would do for any other application? Why so you need RAC to the Clusterware Summit?

    Q3. Is it is possible to combine an Oracle database using 3rd party of clustering and not use Oracle Clusterware and CARS at all that is can you say cluster, an Oracle database using say Sun Clusters, Clustering AIX or Linux native same clustering?

    Q4. If the RAC is purely for Oracle Cluster databases - what is with the title "Real Application Clusters"? What's real on this subject?, what to ask?

    Q5. I also read that RAC can use 3rd party of clustering. However if you decide that this is the case, then you need to install Oracle Clusterware when even (I think for interconnection must be created to allow the merger with Cache between Instances of node?).

    Is this the case?  If yes why never bore you with 3rd party clusters? -Since you will have to install Oracle Clustering anyway - and I probably have to license (all I can think about is the scenario that you already have a cluster of 3rd party in place and you decide that you need to use the same material for a database cluster)?

    All wisdom greatly appreciated,

    Jim

    Yes, with 10g, you had to use the CRS, and with 11g, to use the GI.  For 9i RAC, you would use Verits Cluster and Sun Cluster or anything else.

    11g RAC to GI.  As above, you can use clusterware extra if needed.  I gave the example above where to a 10g RAC we used the CRS to the cluster database/listener/vip and allowing groups of volume and filesystem in HACMP cluster.  File systems were not shared, but could switch to another node failure node, who has been treated by HACMP.  The volume of the groups containing the raw devices were shared volume groups.  For 11g, I never used extra clusterware on top of CRS and have always used ASM which is part of the GI.

    The application provider only certified database to run on 10g on AIX with raw devices.  What is strange about that?  It would be unusual that you probably expect to use ASM instead of raw devices, but it is what it is.

    See the following Note of Oracle for more information: using Oracle Clusterware with vendor Clusterware FAQ (Doc ID 332257.1)

    It is perhaps easier to explain if you can explain what problem you are trying to solve?

  • a closing RAC node

    It is obvious that closing a node (node 1) of the CARS would be disconnect all the session connected in node1?
    While node 1 is down, reconnecting to RAC establishes liaison with node2 (load balancing is enabled)

    But, is it possible to avoid the disconnection of the sessions connected to NODE1 and remains connected to the other node (NODE2) while shudown immediate command executed in ud1?

    Thank you

    Immediate stop on RAC works like on no CARS. All connected sessions are completed and restored. Oracle does not wait for the sessions at the end (without taking into account JOB option)

    Also the information in another answer is also not totally correct. If a session is disconnected attempts to reconnect what happens depends on configuring sqlnet. In other words, if the session is trying to connect to a tns service name that points to only the instance down then it will fail. If If the name of the service points to a tns that refers to multiple instances then it will try to connect to another instance. Configuration options to determine exactly what is happening.

    HTH - Mark D Powell.

    Edited by: Mark D Powell on May 26, 2010 08:06

  • Taking JDBC connection configuration supported the RAC in Oracle SQL Developer?

    How can one Oracle SQL Developer be configured to successfully connect to a [Oracle RAC | http://en.wikipedia.org/wiki/Oracle_RAC] environment, that is, not only the installation program always to connect to one of the individual nodes?

    [http://programmersjournal.blogspot.com/2008/08/jdbc-connection-string-for-oracle-rac.html] is an example of a classic and taking version supported the equivalent CARS of a JDBC connection string. I've used a CAR of the same format connection string from within Java applications custom without problem. I thought that the same thing should be configurable in Oracle SQL Developer, by setting the 'Connection Type' drop-down menu on "Advanced", then enter the connection string JDBC RAC-aware as "Custom URL JDBC". However, after the test connection, the following error message is displayed at the bottom of the dialog box:

    Status: Failure-Test failed: IO exception: NL Exception has been generated

    There is no additional information shown on the display 'Page Logging'. With the help of Oracle SQL Developer 1.5.5.

    Thank you!

    You could always give the current 2.1 ai2 test... continuous development may have fixed the issues in this area...

    Hope that helps,
    K.

Maybe you are looking for

  • Why see iTunes12.3.3.17 cannot not newly added PDFs in iBooks?

    Using of El Capitan on an iMac 17.1 10.11.4, wired to an iPad Air. I want to newly created sync a PDF in iBooks for iPad in the Air using iTunes12, but iTunes12 refuses to see the newly created PDF files. iTunes12 can see the old pdf files, but not n

  • Pavilion dv6 7024nr: Pavilion dv6 7024nr

    I had to reinstall Windows 7 pro and are looking for drivers ethernet controller, network controller, pci legacy, pci simple communication controller and sm bus controller.  not found in hp.com

  • How can I remove avg isearch

    Since I installed Avg free 2012 I was forced to put up with Avg isearch appearing on every page that I didn't have before, that I hate it when something is imposed on me and I think that it is completely unfair that I have not the last word if I want

  • [graph] deleted plots are drawn to chart resizing

    I'm working on CVI2012SP1 and I m having trouble with the chart control. As the stripchart control to much trouble for me, I went with the chart control to display a mobile chart. It works much more painless than with the stripchart, but now I have a

  • MS MapPoint includes territories under trusteeship us and Hawaii?

    We have programmatic data that takes into account the populations in the territories under American supervision (e.g., Guam, American Samoa, Puerto Rico, Marshall Islands, Virgin Islands, etc. and also in the State of Hawaii.)  Description MS MapPoin