Re: Could I have the file 'TosHdpAPI.h '?

Similar Questions

• Satellite U300 PSU3DA: error: could not open the file attribute execution of concept maps

  I have a PSU3DA-U300 which I changed from Vista to XP.
  This is because my main computer use will be for navigation (boat) and I was told that most navigation programs will work better with XP. I have almost nothing on my laptop so far, and the system already seems to be slow and freezing too often.

  My question is now on the program of concept maps which I just installed and which does not open. He repeats to me "Eorror: could not open the file attribute.

  What does that mean? I uninstall and reinstall the program, and he comes back with this message.
  I had a glance at the Device Manager, and the only thing that seems incorrect is the PCI memory controller.
  I did a bit of research on this and it seems that this driver is not required for XP? Is this true?

  Would this be a cause of C-Maps program does not?

  Thanks in advance.

  > I did a bit of research on this and it seems that this driver is not required for XP? Is this true?
  Where did you read this info?
  I put t know if the driver is not required, but you get all the drivers on the Toshiba site.

  For your problem with concept maps, I think that it is best to contact you that support the conceptual maps. Here, this is a forum for Toshiba laptops.

• I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I'm probably not explaining my problem fairly - well, I scanned something in - I used Nuance Paperport.  I have it attached to an email and sent to six people - including myself.  I always open the attached file to make sure that the computer has sent the right thing.  When I tried to open the attachment I got the message "cannot open the file - I have already sent you."  I think that Norton Security got rid of the file I need.  I think I will contact them.  I tried to contact Nuance - but alas, my warranty has expired, so no help there unless I want to pay for it.  If I can't have the problem solved through Norton, I will contact you again.  Thank you very much for taking the time to try to help me.  Have a great Thanksgiving action!

  ================================================
  Your explanation was nice... that was my answer that failed.

  I was hoping that you would simply copy the scan of your temporary
  Internet files folder and paste it on your desktop. Then you might
  evaluate what is the problem. I thought that trying to open
  with such a long way email could be a problem. And also... it's possible
  be a file association problem. And it could be a matter of file size.

  I understand that you care why the attachment to the email
  failure and I think you need to find what is the problem with the scan
  before fastening will be successful.

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• Age of Empires 3 error 0003: could not compile the file 'aiLoaderStandard.xs '.

  People,

  I bought the version of digital download of age of Empire 3 full of steam for installation on my laptop Windows 7 Home Premium. Already, I have the CD versions of all games on my desk, but was also able to install it on my desktop in my Steam account.

  In trying to play the AOE3 game on my laptop, I get the following error:

  00:00:00 (0) xs: error 0003 could not compile the file 'aiLoaderStandard.xs '.

  The net effect of this error is that when I run the game, the AI does nothing. He can place a hometown and a Explorer and/or civil, but they do nothing. I tried to uninstall and reinstall the game several times. I also applied all the patches I could find, to include the last being.

  In addition, when you try to play the TAD version, I do not get the aiLoaderStandard.xs error, but it fails to load the map and never even begins.

  Help, please!

  Hello

  You can view the proposal contained in the link, and check:
  http://Forum.AgeCommunity.com/forums/thread/480165.aspx

  If the problem persists, you can create a new thread in the forum for better support.

• Signature keys: could not open the file of the LSB

  Hi all BB Dev´s!

  I m new BB10 Webworks development. My first steps in the development of the BB Apps I did with MDS Studio a few years ago... But that's another story ;-)

  Now, I developed a small application via Webworks and want to test on my Z10. So I just got my two SJC files and tried to set up my Mac (Mountain Lion) to sign the BB apps as described on this page:

  http://developer.BlackBerry.com/HTML5/documentation/signing_setup_bb10_apps_2008396_11.html

  In step 3, after the order of blackberry - sign, I get the following error:

  Error: Could not open the file CSJ: /Path/to/my/csjfiles/client-RDK-1976876.csj

  Someone at - it a tip for me to get this running order? Or is there a any error a fact?

  Would be happy to comment :-)

  Thank you very much

  Best regards

  Lars.

  Have you copied the file .csj in the following directory:

  C:\Program search in Motion\BlackBerry 10 SDK WebWorks 1.0.4.11\dependencies\tools\bin

  ??

• XmlDataModel could not open the file

  Hello

  I can't seem to understand how to fix this (attention: XmlDataModel could not open the file "... /..") /.. (' / data / model.xml ').

  what I have is the following,

  generate an XML file using the QXmlStreamWriter and after you have created the file (confirmed that the file exist) create a new XmlDataModel

  // modelfile is define in the h file like QFile *modelfile;
  
  modelfile = new QFile("data/model.xml");
  
  QXmlStreamWriter* xmlWriter = new QXmlStreamWriter();
  xmlWriter->setDevice(modelfile);
  
  // do the xml write stuff
  
  modelfile->flush();
  modelfile->close();
  
  XmlDataModel *dataModel = new XmlDataModel();dataModel->setSource(QUrl("../../../data/model.xml"));//dataModel->setSource(QUrl("modelx.xml")); << file in the asset folder to check if this works ( and this works )listview->setDataModel(dataModel);
  

  THX,

  Xtravanta

  Found the solution:

  dataModel-> setSource (QUrl::fromLocalFile(QDir::homePath() + "model.xml"));

• JavaLoader error: could not open the file

  I developed a small application and I'm trying to install it in my camera (Curve 8900) using the javaloader. I used Blackberry plugin for eclipse to develop my app and it works very well in the Simulator. I got the shape of keys BB to sign the application and all of the APIs are now signed.  the javaloader that I use is the one in the eclipse installation folder:

  C:\eclipse clasic\plugins\net.rim.ejde.componentpack4.2.1_4.2.1.19\components\bin

  I use this version because I used to develop the small JRE 4.2.1 application in eclipse.

  and the command is: javaloader.exe u load myapp.cod

  I get just the error: error: could not open the file and nothing is copied to the device.

  The connection is good because I am able to see the device help info: javaloader-u deviceinfo

  I have just the knowledge base on the development for BB and it's my first show stopper...

  Thanks in advance for your help

  This is the solution... I managed to install the application without delay!

  Thank you very much

  Jesus

• could not clean the file history data element not found in windows 8

  My drive hard ext fills, and when I try to clean the first versions or any version I get the same message "could not clean the file history data element not found in windows 8" I don't know if there is a corrupted file.  The only thing I have not done is to delete the entire folder FileHistory ext drive and start again.

  Hey Daley,

  If there are errors in your player in the history of the files that need to be repaired, try to repair your disk

  1. Open the Center of the Action drag from the edge right screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering in the center of Action in the search box, type or by clicking settings and then by typing or clicking on the center of Action.

  2. Tap or click repair.

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Reference:

  What happens if something is wrong in the history of the files?

  Please post back with more information and the status of the issue.

• Could not mount the file. It has not been possible to find a filter for the requested command.

  Get the error message:

  Could not mount the file. It has not been possible to find a filter for the requested command.

  Why is - this happens when I open documents using Mac advertising agency and I'm on PC?

  Hi Mikael,

  files have been archived in archive zip-file when transferred via the ftp protocol? I guess, not.

  If the files were already placed in a document, InDesign on the agency side the following workflow might be the solution:

  Office on Mac OSX:

  1 package the InDesign document, as well as placed images and fonts of the necessary document with InDesign packing device.

  2. the folder packed in a zip zip file.

  3. download the zip file to an ftp server

  You on Windows:

  1. download the zipfile to your own workload.

  2 unzip the zip on your workload. Do not delete the zip file.

  3. rename the folder of the package to fit your scheme of naming of jobs (option)

  4 rename the InDesign document to adapt to your schema naming of jobs (option)

  5. open the InDesign file in the packed file.

  Do not move or save somewhere else.

  Alternative:

  Work with Dropbox to share documents on a shared volume of Dropbox, if documents must move forward and backward between you and the Agency.

  Uwe

• Import error "some operations not carried out. Could not copy the file to the location requested.

  I have the demo version of LR. I imported the pictures that were on my hard drive. Now, I can't import more photos when I want to add new ones. I get a screen that says that some operations have not been performed. Could not copy the file to the location requested.

  Help, please. I don't know what else to try.

  If these images are already on your hard drive, you must use the Add option.

  If they are on a USB key and you want to copy them to your hard drive during import, then the Destination you have select this option to copy them doesn't have the appropriate permissions for your user name. , Select a different Destination or change the permissions on the folder that you selected.

• ORA-17503: ksfdopn:2 could not open the file +M0347_DG1/m0347/spfilem0347.ora ORA-15001

  ASM, database version: 11.2.0.3

  Get error in the two alert logfile of ASM in cluster with two nodes below.

  ============

  Errors in the /u02/diag/asm/+asm/+ASM1/trace/+ASM1_ora_86521.trc file:

  ORA-17503: ksfdopn:2 could not open the file +M0347_DG1/m0347/spfilem0347.ora

  ORA-15001: diskgroup 'M0347_DG1' does not exist or is not mounted

  Same thing is written to the trace file as well.

  There is that a single database that p0347 runs and diskgroup that m0347_dg1 has been for other databases M0347 which is interrupted both diskgroup m0347_dg1 was abandoned.

  But why is it looking for spfilem0347.ora, please let me know how to fix.

  ORA-17503: ksfdopn:2 could not open the file +M0347_DG1/m0347/spfilem0347.ora

  P0347 database has nothing to do with the question. right?

  Probally you have not deleted from database M0347 of OCR and CRS was trying to start the database.

  $ORACLE_HOME of database using

  $ srvctl config database-d M0347

  If it is saved in OCR you should remove it.

  This command will delete the database.

  $ srvctl remove the d M0347 database

  Make sure Diskgroup is registered.

  With the help of GI $ORACLE_HOME

  $ srvctl config diskgroup g M0347

  If registered in OCR you can remove it.

  $ srvctl remove diskgroup g M0347

• The file format module could not parse the file (45: 35)

  I don't have to import a raw sequence in after effects cc 2015,.

  The error message keep popping up - the file format module cannot parse the file (45: 35).

  I saw people saying that there is the problem of the color mode and should be fixed in photoshop,

  but I could not open the raw files in photoshop.

  I also converted dng files raw files, yet, I could not open the files in legacy.

  I shot some pictures with my canon 6 d.

  I copied the files on another pc, with the same version of After Effects and Photoshop,

  There is no problem when I import the files.

  The update of the corrections after effects CC 2015 (13.5.1) is available, which corrects this problem: http://adobe.ly/1Il5JYe

• Power error: could not open the file exists

  This weekend a partition containing my virtual machines VMWare has been accidentally deleted by the Acronis backup software
  I have rebuilt the partition and re-assigned the same drive letter.
  Then I restored the 'Virtual Machines' from my backup folder.
  Now when I run VMPlayer and start my virtual machine I get the following error:

  Power error: could not open the file 'H:\Virtual Machines\Windows\XP Professional\Windoes XP Professional.vmdk': the system cannot find the specified file.

  The directory search I find the file with the name and the correct directory path.
  Some attributes (readonly, hidden, etc.) are on.
  I am logged in as administrator.

  Is there some other files/directories should I have also restored?
  Suggestions?

  "" According to the newspaper files of the virtual machine has a 40 GB virtual disk consisting of 21 files Windows XP Professional - s001.vmdk '-Windows XP Professional - s021.vmdk. However, the screenshot shows only 5 of these files hard! Please check if you can recover the missing files.

  André

• Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "coul

  Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].

  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "couldn't copy file at the location requested.  Help, please!

  Your use of the word "files" (in the plural) still makes me believe that you have not checked the permissions on the folder that is appropriate (in the singular).

  You must determine the Destination of the Lightroom Import dialog window Panel and see which folder Lightroom is really tr6ing to copy photos in (which may have been accidentally changed and is not what you may have used in the past) and change the permissions to write to this folder.