Re: Could not start recovery disc HARD on my Satellite U840

Similar Questions

• Could not start recovery disc HARD on Equium A100-027

  Hello

  function of disk management on my Vista Home premium OS my recovery partition is healthy and always there. The problem is that I can't do a restore from the HARD drive?

  I hit the F8 key at startup and then fix it. I then select keyboard and enter my administrator/user password.
  Next, I get the Startup Repair, the etc system restore list. The option I want is the restoration of the full windows OS. When I click on this option, it opens another saying the full windows... operating system restore window then under that he said if pre-installed files are damaged, you can use the DVD-ROM product recovery to restore.

  Under which he says when you reinstall windows all data lost etc... When I hit OK it just goes back to the previous menu? I put t have a DVD only what lies on the recovery partition. Also I have no software to create CDs on the recovery system?

  Is - it there anyway I can make the recovery partition works? Thanks for any help...

  What recovery partition? Please don t mix image partition and WinRE recovery for any new OS install. This is not the same. Partition Windows re can be used to repair but not to the new installation of the OS.

  I m not 100% sure, but I think that this old notebook Equium has not been delivered with HARD drive recovery option and recovery DVDs was probably delivered.
  Did you buy this laptop as new or perhaps already used equipment?

  BTW: you will not be able to create recovery DVDs. This option was not available at the moment when the laptop was offered.

• Problem recovery disc HARD on the Satellite C660

  My apologies if this is the wrong sub-forum:

  The fool that I am, I changed my WIndows login and password since I use very long passwords, I don't know what I changed it to. Guessing is out of the question.

  So I turned on my computer laptop while holding the key 0, what brought me to the Windows Boot Manager screen. I pressed F8 on Windows 7 for advanced options and opted for "Recovery Mode", as I've used in the past to install the operating system from scratch.

  It asks me to select a keyboard layout, and then enter my user name and password to proceed to the recovery of HARD drive. It is this lack of password which is the reason for the recovery.

  Any advice on what I can do?

  Thank you

  > It asks me to select a keyboard layout and then enter my user name and password to proceed to the recovery of HARD drive. It is this lack of password which is the reason for the recovery.
  On this step, you must enter your login name and login password of Windows. Without correct password, you will not be able to start the installation of HARD drive recovery.

  There is option to install the recovery image. You can do so now using recovery DVDs. You have created using the preinstalled Toshiba recovery disc creator?

• Satellite L750 - could not start recovery image installation

  Hi guys,.

  I struggle to restore the original configuration (format) my toshiba satellite L750 push button power and zero (0) button together.

  I did factory restore before setting because there is a virus on my laptop. After format, all right. Now my laptop is infected with the virus once again, but I won't be able to format my laptop more. Whenever I press the power button / stop and zero button (0) I always hear a beep and won't stop until I press zero (0).
  I have before partition.

  My question is why I couldn't format my laptop more like how I use before (by pressing the power button / stop and zero button)?

  Can someone help me how to format my laptop the button works / stop and zero button does not?
  Thank you

  Hello

  If you have laptop model please follow the instructions described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
  You need to boot the laptop with F8 and choose the option to fix my computer.
  This option is available in advanced startup options?

• WXP could not start file is missing or corurupt - Satellite Pro A10

  Windows does not load file is missing or damaged. Start Windows by using the original installation cd please select 'R' at the first screen.
  I have 2 product recovery CD but I can't seem to operate.

  I think that there is no other way to reinstall the Windows operating system.
  If you want to use the Toshiba Recovery CD you need to boot from the right recovery CD.
  You said that you have 2 CD?
  Well, try to boot from CD 1. If this does not work, put the CD2 in the drive.
  Maybe they mix the label ;)

• Cannot complete installation of recovery disc HARD on my Satellite L450

  Hi guys

  I'm busy doing an out of the box boot, all is well until there, copy F to V hddrecovery its impasse on 1-7. What can I do?

  Been up to 3 hours now, I can do the loan all deleted all the data, how long should I leave in its current state, thank you

  Hello

  I'm afraid that something was wrong during the process of recovery of m.
  I think you can try to repeat once more. Maybe it would work. In the case of the disk HARD recovery isn't possible, you will need to retrieve the laptop using recovery media.

  Do you have created disk recovery or recovery USB flash memory stick in the past?

• Windows error recovery. Windows could not start... _

  My Dell laptop I have from 10th July indicates the following:

  Windows error recovery

  Windows could not start.  A recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, chose to start windows normall7

  Start the reboot system (recommended)

  Start Windows normally

  The two options to return to the same screen.

  I tried the menu under the F keys, but all options listed do not seem to do anything.  I talked to Dell who ran a diagnostic test on the portable equipment and everything was ok.  They wanted then £70 the issue above which I am unhappy that have not had the laptop for a year yet!

  I would be very grateful if you could help!

  Thank you

  Mark

  Hello mtb123,

  1. have you tried the steps suggested by Srinivas R in the previous post to make a startup on your computer repair using the Windows installation disc?

  2. you remember what changes you made to the computer before you start this error?

  I suggest that you access the system recovery options using a Windows Vista installation disc and do a startup repair and if this fails, you can do a restore of the system from the Windows recovery environment.

  You can see the previous post of Srinivas R to verify the information on the system restore.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Qosmio G45-AV680 - Windows could not start

  My cousin has this laptop and could not start the system. It displays the message:

  "Unable to start Windows. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you don't have this disk, contact your system administrator or computer manufacturer for assistance. Status: 0xc000000f

  "Info: the boot selection failed because a required device is not accessible.

  I tried to go into safe MODE, but it cannot do so. It starts to load the drivers, but it stops at some point and will not continue...
  The problem is that she did not have any DVD with laptop. I guess that the Vista operating system, that comes with it is the special partition on the hard drive, but how can I access it? How can I reinstall the system? I don't mind if I lose data, I used just to make it work...

  If DVD recovery is not assured that means installation of recovery can be started from the HARD drive. I don't know how it works exactly on cell phones in the United States. Try pressing zero button after starting upwards to see if HARD drive recovery option can be started.

  By the way: check the Toshiba U.S. support under http://laptopforums.toshiba.com/tshb/ forum
  Maybe someone there can explain how it works to start the installation of the OS on the HARD drive.

• Windows could not start. Winload.exe corrupted

  Been having some problems with my Equius has therefore decide to start, F8 and do a system restore toshiba.

  Started and started to format the drive. All of a sudden he projected blue.

  The problem is now I can not even start until now to get the recovery/restore option. I get: -.

  Windows could not start. A recent hardware or software change might be the
  cause...

  File: \Windows\system32\winload.exe
  Status: 0xc000000f
  Info: The selected entry could not be loaded because the application is
  missing or damaged.

  Not sure how it all works, but I guess that recovery stuff are stored on a separate partition. Problem is I guess you must be able to start to load windows before you even get to do this?

  I downloaded and tried a boot with no joy, and of course vista recovery disk, toshiba provide a vista disk. How the hell can I recover from this situation?

  Hello!

  If you are not able to get in the boot menu for HARD drive recovery, you must use a Microsoft Vista disc to reinstall the OS.
  Or you use the Toshiba recovery disc but I think you forgot to burn the disk because normally you get a message (recovery point) you want to burn the disc.

  However, you can order a Toshiba Toshiba recovery disc directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Satellite C660D froze and won't start - Windows could not start

  OK, enough of the more dense person you will ever likely to meet when it comes to things like that. but will try my best to explain.

  There are a few days that my laptop has frozen on me on me having to turn it off and start it again by the power button. When I started again the message below appears.

  WINDOWS ERROR RECOVERY
  Windows could not start. A recent hardware or software change might be the cause.
  If windows files have been damaged or misconfigured in, Startup Repair can help diagnose the problem, if the power was interrupted during startup upward, choose start windows normally.

  -Launch start repair (recommended)
  -Start windows normally

  When I press launch Start up repair that it goes to a screen with a big cursor (that you can move) but nothing happens.
  When I pressed the start windows normally put it went through the windows logo while starting but then stops at this point.

  My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was dense enough: p

  Thanks for looking

  Dean

  > My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was pretty dense

  I think its easy to correct, but you'd need a Toshiba recovery disc.
  Have you created one in the past?

  If not, try to start the HARD drive recovery: turn on the device, press F8. Now choose fix my computer.
  Now new window should open, and here you must select Toshiba HDD recovery option. This would create the laptop back to factory settings.

  In case this isn't possible, you will need to boot from a recovery disk to reinstall the system.

• Windows could not start on Satellite L510

  HI :)

  I'm not very tech savvy, I've only had my laptop a month. And yesterday, when I turned it back on I got this message...

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem: Insert your windows installation disc, and then restart your computer
  If you do not have the disk, contact your manufacturer computer or system administration.

  file: \boot\bcd
  status: 0x000000f
  Info: an error occurred trying to read the boot configuration

  I have been all over these forums and the internet looking for a solution, but no luck. It's the weekend, so I can not communicate with the service line.
  I would appreciate a process step by step what it is, that I need to download or reset. I do not have the windows installation disc, because it did not come with my laptop.

  I really appreciate your help in advance ;)

  Hello

  Well, the error message says everything to me. Insert the Windows disk * or * contact manufacturing (Toshiba). ;)

  By the way: it would be interesting to know if you can boot into safe mode. Check it!
  If so, you may start the HARD drive recovery. Therefore, select Repair my computer in the Advanced Start menu and follow the instructions on the screen.

  Yes, with the laptop didn't come a disc, but you can create one!
  Please read the operating manual always first.

  Now it s too late to create such a floppy, but you can order directly into a new Toshiba:
  https://backupmedia.Toshiba.EU/landing.aspx

• Windows Vista: windows could not start error. is suspended from the "Microsoft Corporation" loading bar then black screen BIOS not acpi compliant

  After you have installed the driver for the zune hd, I was asked to restart my computer. After the reboot, start froze on a white screen. I've seen this before and it is usually because of some connected usb components. so I manually powered down the Tower, disconnected the cable from zune and restarted. This time a screen saying that windows could not start, "launch Startup Repair tool" was recommended. Select this habit makes the startup hang to the progress bar from Microsoft corporation, then to a completely white screen. Although strangely, once only a blue error screen appears which says that the BIOS is not acpi compatible. I can't restart with F8 to go into safe mode, "windows error recovery" still appears. "Start windows normally"produces the same results as the tool to restart launch system. " I have a drive to upgrade to windows 7 and a windows XP upgrade disk. the disc of windows 7 hangs at "starting windows" and the XP disc gives a blue screen error: stop: 0x0000007B (0xF78D2524, 0c 0000034, 0 x 00000000, 0 x 00000000)

  I think I have a BIOS problem, but I don't know how I could continue dealing with the repair. I have no success update the bios from usb flash. Any idea is appreciated.
  Update: managed to start with F8, choose to boot in safe mode and loading hangs after "load: \windows\system32\drivers\crcdisk.sys"***.
  the machine is a gateway LX6810-01 (friend motherboard)

  Hello

  1. What is the exact error message when Windows Vista does not start?

  2. you have the disk Installation of Windows Vista operating system?

  I suggest you change the mode of RAMA to IDE in the BIOS. You can contact the PC manufacturer for assistance.

  Note: BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  In addition, perform a check disk in Windows Recovery Mode.

  (a) Insert the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD".

  (c) select a language, an hour and the currencyand a keyboard or an input method, and then click Next.

  (d) click on check drive for errors.

  (e) in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  (f) to the System Recovery Options dialog box, click on check Drive for errors.

  (g) use the switch/r to run the disk check.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  It will be useful.

• My 6 month old dell does not start, application disc... do start that I reinstall Windows Vista?

  My relatively new computer that didn't gave me no problems at all recently frozen. I restarded and it could not start. He asked for a boot drive - I put the disc of the operating system (windows Vista) and clicked on repair computer. He was asked to choose a listed operating system and there was no operating system listed. Then, he said "if any operating system in the list, select system drivers" (something like that). Then it brings up a bunch of files. I click on them and they can not be opened. Reinstallation of windows seems complicated... I'm afraid that I have will mess things up. and I want to be absolutely sure that the problem cannot be repaired first. Help!

  Obviously, somethng has hurt terminally with your operating system.

  Your computer is relatively new.

  It is under warranty Dell for all hardware and software problems.

  http://support.Dell.com/

  Why don't contact you their 1-the above link to get advice on what to do.

  Follow the instructions in Dell to reinstall Vista.

  Below the link of Dell for the info on how-to-reinstal Vista using the two methods.

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  It's way to Dell to reinstall from the DVD on your computer.

  Answer the questions in blue; It is in a sequence.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• I get a message from Windows could not start whenever I turn on my computer.

  Original title: Windows could not start.

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  (1) Insert your disc to Installations of Windows, and then restart your computer
  (2) select language settings, and then click "next".
  3) click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\drivers\volsnap.sys

  Status: 0xc0000221

  Info: Windows could not load a critical system driver is missing or corrupt.

  ***
  Whenever I restart the computer, this is the window that appears and I can't go in front of her.  It cannot boot without failure, or any other mode.

  ANY help is appreciated! I don't have the original installation disc for Windows.  And since I can't go beyond that I can't the product key...

  My computer is a Sony Viao VGN-N350E

  mnmshemi

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• Today my Macbook Pro could not start.  He showed me the ban or no symbol.  I was able to access disk utility and run first aid on the SM0256G of SSD Apple media successfully.  Cannot start in normal/safe mode.  Should I delete/install so I can?

  MacBook Pro 13 '' end 2015.  256 GB SSD drive. El Capitan last version 10.11.4. I turned on the Macbook Pro and it could not start.  The progress bar with the Apple Logo would be present but would end not showing the symbol «»  I tried to boot mode safe - no go.  I have not reset PRAM help.  I was able to access disk utility and run successfully the first aid. No help. I was unable to restore two separate backup.  The utility show me backups however when I would go to the next screen and no backup is available.  Disk utility displays the SSD.  Can I erase the disc and download OS X install?  Thank you.

  At this point, there is no need to delete. A new copy of Mac OS X can be installed directly over the old copy. This process replaces the components of Mac OS X on a file by file basis and adds missing ones, there will be no major throwing away what anyone, unless there is a power failure.

  You have already run disk first aid.

  Now use mode of recovery (command + R to start) to "Re-install Mac OS X. It should install the latest revision of the main version that you ran last.