Re: Detection of Bluetooth, installation on WinXP SP2 32 devices

Similar Questions

• Installation of WinXP SP2 on a soft S51

  Hello world!
  I am trying to install Windows XP SP2 on a fresh and formatted S51 (8171-CTO) but, after the partitioning and copying files, the system does not start from the HARD drive.
  I even tried with any other operating system (Ubuntu), performing the same result. Partitioning, copy, first boot HARD drive fail.

  The HARD drive is good and well formats.

  Can you help me? Have you had the same problem?

  Thank you.

  Hey Netnubar,
  I solved the problem. I don't know HOW, but here's what I did:
  -changed the IDE cable with two other different - no effect.
  -re-installed the original HARD drive (who was working on another computer) and I tried to install an OpSys (Ubuntu). Once again, all good until the first start.
  -Tried again with WinXP, but this time after partitioning, I told the XP Installer FORMAT, not QUICK FORMATTING of the HARD drive.

  IT WORKED! ****

  Funny, but true.
  Now it works perfectly.

  Thank you very much for your help!

  Ciao,.
  Stefano.

• Installation of WinXP SP2 on Satellite U300 - Intel ICH7M?

  Hi ppl,

  I just bought a brand new U300-10s and I tried to install XP pro sp2 with the appropriate drive (I assume) ICH7M_32bit.

  I made it trough a usb drive external hard toshiba, the computer found the driver about this, but at some point during the instalation it does not continue...

  my email... [email protected]

  could you please tell me more about this facility, which don't miss?

  Kind regards.

  Hello

  you guessed wrong. :) It s not the ICH7M_32Bit. You must use the ICH8M_32Bit as your machine is a SantaRosa platform with an Intel 965GM chipset.

  And the HARD disk controller is the ICH8M. ;)

  Good luck with installing XP

  Welcome them

• Driver Bluetooth installs not on Satellite A100-466

  I buyed this laptop yesterday and the only thing I still need to install is the stack of BT and BT drivers.
  When I hit fn + f8 to start bluetooth it starts the installation but once he starts to install drivers bluetooth windows gets crazy and constantly detects hardware and installs and reports a problem.

  There was a problem installing the hardware and starts over and over again until I finish the installation.

  I downloaded the last of this site, but the problem is the same.

  Hello

  Are you sure that this device supports BT to 100%?
  If the device supports a Bluetooth device so you should find a label of BT on the bottom of the unit...

• Windows Update error 0 X 80244019 in WinXP SP2

  do a rebuild of my dual boot Win XP and Win7 system - must have a software that can be run on Windows XP.

  try to get updates, but the site 'Encountered a problem' and get the above error code.

  Can not use the fixit tool as it is to the SP2-tool requires SP3, which I'm moving to.

  Data sheet:

  WinXP SP2 32-bit on 200 GB drive HARD Sata2-partion

  IE8

  AMD Phenom II 4 x 2.51 GHz

  ASRock MB w / chipset Via

  4 GB of DDR2 ram

  Preliminary work:

  Download the installation files of SP3, IE8 and Microsoft Security Essentials, which is an effective antivirus/antimalware program. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials (for MMS)

  1. physically disconnect from the Internet. Also unplug all unnecessary devices!

  2. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  Select "Turn off automatic updates" and click OK.

  3. install the SP3. Restart TWICE.

  4. switch to IE8. Restart TWICE. (Note: it is important to let IE at the level before the upgrade to SP3 IE6.) After you are in SP3, then you can switch IE6 to IE8).

  5 install MSE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  6. make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  7. visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  8. reactivate the automatic updates.

• A computer WinXP SP1 can be updated WinXP SP2 or SP3

  Windows xp service pack 1 recent recharge

  is no longer compatible with the windows update web site

  32

  dial the system

  You have a friend with a fast connection?

  If you haven't already done so, you will need to install the SP2 and SP3

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Windows XP Service Pack 2 - Download (for single PCs too)
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8e-4F30-8245-9e368d3cdb5a&DisplayLang=en

  Are you ready for WinXP SP2?
  http://support.Microsoft.com/default.aspx?PR=WindowsXPSP2

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

• PEAP EAP/TLS, PORTEGE with WinXP sp2 Tablet Edition problem

  We have: Rev AiroNet350 Cisco with WPA - EAP: Freeradius with EAP/TLS and PEAP, tablet PC PORTEGE with WinXP sp2 configuration.

  This problem discribed in http://wiki.freeradius.org/index.php/FAQ#PEAP_Doesn.27t_Work
  Perhaps to solve this problem we need a fix (http://support.microsoft.com/kb/885453/en-us), but microsoft support said to contact the laptop manufacturer.
  Can someone help me with this problem?

  Hmmm I m not an expert in this area, but it seems that the MS OS update is necessary. (I hope)
  The preinstalled Windows operating system is a simple OEM version and generally all updates should be possible. However, if MS guys told you to communicate with the manufacture of the laptop, you can contact the maintainer authorized Toshiba in your country for details.

  But I studied a bit on the net and found this site useful:
  http://SearchNetworking.TechTarget.com/originalContent/0, 289142, sid7_gci945257, 00.html

  1. 802. 1 X is based on communication between your router and a RADIUS authentication server. If you use WEP, WPA or WPA2 with dynamic keys, 802. 1 X debugging following tips may be useful:
  a. reintroduce the same RADIUS secret in your wireless router and the RADIUS server.
  b. configure your RADIUS server to accept the request of the RADIUS of the IP address of your router.
  c. use ping to check the accessibility of router-server.
  d. package watch LAN account to verify that RADIUS and answers queries are fluid.
  e. use an Analyzer like Ethereal Ethernet to watch RADIUS success/failure messages.
  f. for XP SP2, turn on Wzctrace.log by typing "command netsh ras set followed * activated.

  2 if RADIUS is flowing but are rejected requests for access, you may have a problem of incompatibility or credential X Extensible Authentication Protocol (EAP) 802.1. This setting depends on Type EAP. For example, if your RADIUS server requires EAP - TLS, then select 'Card chip or other certificate' of your adapter wireless network properties / authentication Panel. If your RADIUS server requires PEAP, then select "Protected EAP" of the adapter. If your RADIUS server requires EAP-TTLS, then you will need a third-party wireless like AEGIS or in Odyssey client.
  Make sure that this specific EAP properties match for your adapter and the server, including the server CA certificate root trust Server domain name (optional but must match when it is specified) and the customer (EAP-MSCHAPv2, EAP - GTC) authentication method. When you use PEAP, use the control panel to 'Configure' CHAP to prevent Windows from automatically re-use of your connection.

• The installation of Vista SP2 broke my computer

  I've lived in innumerable discussions on this site and many others to solve this problem the Vista SP2 has caused my computer to have. I have a Toshiba with Vista x 64 Home Premium computer and after several attempts failed to download SP2 months ago, I tried last night and after that he was 100% and restarted my computer it actually ruined my computer to be useful. I don't have a vista disc but a recovery partition. I already tried to use the restore point created by vista before installing SP2, but of course since it is vista this restore point fails and I have created several others before, but as if by magic, they are not put at my disposal. What is even more galling it broke my partition Ubuntu separate to be able load as well which makes absolutely no sense.

  I get the same error again and again as hundreds of others after SP2 installation on the black screen: ! 0xc0190036! 3029/89361 (dsound.dll) , I found a solution involving the use of partitions recovery tools command prompt to use this code:

  C:
  CD windows
  CD system32
  faultrep.dll.old Ren faultrep.dll
  output

  now, it worked the first time during this first stop in 1316/89361 on the startup process when he stopped to faultrep.dll, then of course another stop to dsound.dll happened and I tried the same thing, as advised in a support forum and it worked in the command prompt, but loading at startup it will pass fine faultrep since the fix but will not pass the dsound.dll portion.

  I ran a test of memory and a hard drive and it is absolutely not she. It was absolutely the installation of Vista SP2 all screwing.

  A lot of people with this problem have been very well when they could use their restore point, but of course vista is still inconsistent and would not allow me to restore my computer so now I have a $1200 thanks to the crap service Pack2 weight. I can log on to the recovery tools command prompt and open notepad.exe and file open to view my computers content together intact so much, I would like to know a solution for this problem. I also found a command line to uninstall SP2 with high fees, but because I can not connect via the mode without failure of all or the safe mode with command prompt, how am I supposed to use the instructions to uninstall sp2 via command prompt?

  Any help would be greatly appreciated since windows makes my computer a waste of money.

  The page I used to solve problems has been directly for the support site for windows and for exactly the same problem I have but he did nothing. http://support.Microsoft.com/default.aspx/KB/975430 is the link, I tried method 1 is the system restore and that has failed, because it fails just about my only point that shows that I did much more than restoration. Method 2 is to rename the file that stops the boot process, who worked for the first file but not the second. Method 3 is the startup repair that does not work.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; (*Problems after installing a service pack*).

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Where to find a download for KB2541763 for winxp SP2

  original title: as KB2541763 patch for winxp SP2

  I need to update IExplorer on a winxp SP2 system with an identical to KB2541763 task used to SP3systems. Is there an alternative solution upgrade to SP3?

  Hello

  Unfortunately, the patch KB2541763 are available for Windows XP Sp3, you must install Windows XP SP3 to download this hotfix.

  Step 1:

  Check out the link below to download the Windows XP Service Pack 3.

  Learn how to install Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  To learn more about Windows XP SP3, click the link below.

  Overview of Windows XP Service Pack 3

  http://www.Microsoft.com/download/en/details.aspx?ID=10767

  Step 2:

  Once you install Windows Service pack 3, you can download the update KB2541763 from the link provided below.

  Update for Windows XP (KB2541763)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26585

• My sata cd rom a problem after re-installation of WinXP Pro by this cd rom; error code 041; How do I solve this problem

  My sata cd rom a problem after re-installation of WinXP Pro by this cd rom; error code 041; How do I solve this problem

  It's almost certainly a driver problem.

  Please tell the service pack on your Windows® XP Pro level forum and the manufacturer and model of your system, if it is conditioned, or the make and model of your motherboard if it is not.  In addition, please tell us the manufacturer and model of the optical drive.

  First of all, if there is a system, go to the support Web site of the manufacturer for your system model.  If this is not a system, go to the support Web site of the manufacturer of the motherboard for your model of motherboard.  In the first case, you should find the drivers, chipset in particular drivers, updates and software for your system. Install all the that apply.  In the second case, you will find the drivers of integrated devices, chipset, updates and software for your motherboard drivers. Yet once, install all the that apply.  As we know nothing on the optical drive other it is attached via SATA, I can't talk about what to do there except that you should go to the manufacturer's support Web site and search for drivers and updated firmware for your model.

  It would have been helpful if you had provided more complete information on the installation of Windows, your system hardware and the optical drive.  The most complete information; more answers you will get.  Please, read:KB555375 - how to ask a question.

  Don't forget, no member of this forum is omniscient.

• PC doesn't DETECT XP during installation. Vista installation is fine.

  PC doesn't DETECT XP during installation. Vista installation is fine.

  Hello

  I have a laptop that was previously installed on the xp machine. The system crashed and I tried to reinstall Xp home edition. But when I did that, he threw an error that it could not detect my hard drive. myinitial was that the hard drive had crashed, but the BIOS test he returned no errors. I tried vista on the machine and found that it functioned perfectly well. I trid re - install xp on the computer from the vista desktop, but it would throw into the same error after the re-start of the system. "Could not find hard disk..." Please advice...

  ATTENTION: You can not wake XP if you do not have a real XP install disc. If you try to use a recovery disc that simply does not work. I assumed you had an installation disk XP at retail with a unique product key. The only way you can use the product key on the laptop for an XP installation is if you have a generic OEM installation disc with the same version of XP that what was initially installed on the laptop. Subsequently, you will need to install all the drivers and the specific portable software for this model. You will get these from HP website.

  Again, a much better solution in your case is to buy someone or HP recovery discs as RestoreDisks.com. MS - MVP - Elephant Boy computers - don't panic!

• "sfc/scannow" was not able to repair some files, one or more of which must be in the path of an installation of Vista SP2

  I tried to install the SP2 of Vista for a few days now with no luck. Earlier today, I had a breakthrough and was finally able to install 'patch for Windows", which, after a reboot, enabled me to see the x 64 SP2 update in part"updates"of the control panel. When I tried to install that, he said he failed and gave me an error code. When I looked it up, it says try "sfc/scannow" in an elevated command prompt. The research a ton of lines of logs and errors, and after looking through, I could find these as (the least most) files problem-

  WinSAT.exe
  Amd64\HPF940AL. DLL
  PresentationBuildTasks.dll
  locale.NLS

  My question is, are any of these files required for the installation of Vista SP2 to cross? Thanks in advance for any help offered, and more information is needed, I will gladly provide.

  Extra balls (If I missed a few files problem, I'd appreciate a double check. WinSAT.exe was not who listed there, but it was listed above upward with no sign to be repaired)

  2014-06-08 14:32:54, 000002f0 CSI Info [SR] verification complete
  2014-06-08 14:32:54, 000002f1 CSI Info [SR] repair 8 components
  2014-06-08 14:32:54, CSI Info 000002f2 transaction [SR] beginning verify and repair
  2014-06-08 14:32:55, CSI Info 000002f3 hashes of file members \SystemRoot\WinSxS\amd64_microsoft-windows-i... nal-Core-locale-nls_31bf3856ad364e35_6.0.6001.18000_none_c6d6cc5d61a33307\locale.nls is not actual file [l:20 {10}] "locale.nls": "
  Found: {l:32 b:wmYkySbnNnz5uBFxkqlZYwcQXpJF7VPzM7ezK / KmEmU =} expected: {l:32 b:KTJBpw1awVp4c5LesEXyEM / jfGsI24iQGrROSGLA9Tc =}
  2014-06-08 14:32:55, 000002f4 CSI Info [SR] cannot repair the military record [l:20 {10}] "locale.nls" Microsoft-Windows-International-Core-Locale-NLS, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2014-06-08 14:32:56, CSI Info 000002f5 Member \SystemRoot\WinSxS\amd64_microsoft-windows-newdev_31bf3856ad364e35_6.0.6001.18000_none_6d94e6d8090688e9\newdev.dll file hashes are not actual file [l:20 {10}] "newdev.dll": "
  Found: {l:32 b:lSyVpDkn/cMYwbuVSPH7Zs5/O8nFWBZqM2RQ9Au7lBc =} expected: n. b:KgBvBB/y3DPbBu/sLiebqGDKWCYtcAHle5YbZ1OItbU = l:32}
  2014-06-08 14:32:56, 000002f6 CSI Info [SR] cannot repair the military record [l:20 {10}] "newdev.dll" Microsoft-Windows-NewDev, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2014-06-08 14:33, CSI Info 000002f7 Member \SystemRoot\WinSxS\amd64_prnhp001.inf_31bf3856ad364e35_6.0.6001.18000_none_2eef0719d90dbdd0\Amd64\HPF940AL file hashes. DLL is not actual file [l:36 {18}] "" Amd64\HPF940AL. "» DLL:
  Found: {l:32 b:skEriPi1c9ksB0gEgVdygoY5xO9Ov8GD8 / 0CX4rugB0 =} expected: {l:32 b:mU / ap55UOjxtVzdrgCzt62CW4HxfZ + uALCVLOKOcCtU =}
  2014-06-08 14:33, 000002f8 CSI Info [SR] cannot repair the military record [l:36 {18}] "" Amd64\HPF940AL. "» DLL"prnhp001.inf, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24 {12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
  2014-06-08 14:33, CSI Info 000002f9 Member \SystemRoot\WinSxS\msil_presentationbuildtasks_31bf3856ad364e35_6.0.6001.18096_none_9bc52ef038dbf0b3\PresentationBuildTasks.dll file hashes are not actual file [l:52 {26}] "PresentationBuildTasks.dll": "
  Found: {l:32 b:cm3V/Ig0IdNHXGV6tzz8nMN2GvpxC0nujF4j/RbeCW4 =} expected: {l:32 = b:har0YuKv8pbmLU0w7b0vcjKcWyduPIiqUPx5HlaC02E}
  2014-06-08 14:33, 000002fa CSI Info [SR] cannot repair the military record [l:52 {26}] "PresentationBuildTasks.dll" PresentationBuildTasks, Version = 6.0.6001.18096, pA = PROCESSOR_ARCHITECTURE_MSIL (8), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2014-06-08 14:33:02, CSI Info 000002fb Member \SystemRoot\WinSxS\amd64_prnhp001.inf_31bf3856ad364e35_6.0.6001.18000_none_2eef0719d90dbdd0\Amd64\HPF940AL file hashes. DLL is not actual file [l:36 {18}] "" Amd64\HPF940AL. "» DLL:
  Found: {l:32 b:skEriPi1c9ksB0gEgVdygoY5xO9Ov8GD8 / 0CX4rugB0 =} expected: {l:32 b:mU / ap55UOjxtVzdrgCzt62CW4HxfZ + uALCVLOKOcCtU =}
  2014-06-08 14:33:02, CSI Info 000002 fc [SR] cannot repair the military record [l:36 {18}] "" Amd64\HPF940AL. "» DLL"prnhp001.inf, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24 {12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
  2014-06-08 14:33:02, 000002fd CSI Info [SR] this element is referenced by [l:164 {82}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.1.18000.936330 - 161_neutral_GDR" "
  2014-06-08 14:33:03, CSI 000002fe hashes for Member file Info? \C:\Windows\Speech\Engines\SR\en-US\af031033.am are not real file [l:22 {11}] "af031033.am": "
  Found: {l:32 b:cq + 1NYUaITMpBYllzFX/LW74KgeL5QGxQ0 + PBG / 4w4 =} expected: {l:32 b:oZ + J3PjqKUUdN1O + pJQYQ8z + 5SccD + uPMQHFfMlQalE =}
  2014-06-08 14:33:03, 000002ff CSI Info [SR] repair corrupted file [ml:520 {260}, l:76 {38}] '------? \C:\Windows\Speech\Engines\SR\en-us"\[l:22{11}]"af031033.am' of the store
  2014-06-08 14:33:03, info CSI 00000300 WARNING: file [l:22 {11}] "af031033.am" in [l:76 {38}] '-? ' "" \C:\Windows\Speech\Engines\SR\en-us' switching property
  Old: Microsoft-Windows - SpeechRecognizerENU.ale, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
  New: Microsoft-Windows - SpeechRecognizerENU.ale, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
  2014-06-08 14:33:03, info CSI 00000301 Member \SystemRoot\WinSxS\msil_presentationbuildtasks_31bf3856ad364e35_6.0.6001.18096_none_9bc52ef038dbf0b3\PresentationBuildTasks.dll file hashes are not actual file [l:52 {26}] "PresentationBuildTasks.dll": "
  Found: {l:32 b:wskm5ChU9DmxqusVLNiJTnb8sdPBBokQ8Eb8nO/P5/Y =} expected: {l:32 = b:har0YuKv8pbmLU0w7b0vcjKcWyduPIiqUPx5HlaC02E}
  2014-06-08 14:33:03, info CSI 00000302 [SR] cannot repair the military record [l:52 {26}] "PresentationBuildTasks.dll" PresentationBuildTasks, Version = 6.0.6001.18096, pA = PROCESSOR_ARCHITECTURE_MSIL (8), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2014-06-08 14:33:03, info CSI 00000303 [SR] this element is referenced by [l:166 {83}] "' Package_4_for_KB948610 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.6001.2123.948610 - 322_neutral_GDR" "
  2014-06-08 14:33:04, repaired Info CSI 00000304 [SR] file \SystemRoot\WinSxS\Manifests\\[l:20{10}]"newdev.dll" by copying from backup
  2014-06-08 14:33:04, info CSI 00000305 hashes for Member file? \C:\Windows\System32\newdev.dll are not real file [l:20 {10}] "newdev.dll": "
  Found: {l:32 b:lSyVpDkn/cMYwbuVSPH7Zs5/O8nFWBZqM2RQ9Au7lBc =} expected: n. b:KgBvBB/y3DPbBu/sLiebqGDKWCYtcAHle5YbZ1OItbU = l:32}
  2014-06-08 14:33:04, info CSI 00000306 [SR] repair file corrupted [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"Newdev.dll' of the store
  2014-06-08 14:33:04, info CSI 00000307 hashes of file members \SystemRoot\WinSxS\amd64_microsoft-windows-i... nal-Core-locale-nls_31bf3856ad364e35_6.0.6001.18000_none_c6d6cc5d61a33307\locale.nls is not actual file [l:20 {10}] "locale.nls": "
  Found: {l:32 b:wmYkySbnNnz5uBFxkqlZYwcQXpJF7VPzM7ezK / KmEmU =} expected: {l:32 b:KTJBpw1awVp4c5LesEXyEM / jfGsI24iQGrROSGLA9Tc =}
  2014-06-08 14:33:04, info CSI 00000308 [SR] cannot repair the military record [l:20 {10}] "locale.nls" Microsoft-Windows-International-Core-Locale-NLS, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2014-06-08 14:33:04, info CSI 00000309 [SR] this element is referenced by [l:164 {82}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.1.18000.936330 - 185_neutral_GDR" "
  2014-06-08 14:33:04, CSI 0000030 has hashes for Member file Info? \C:\Windows\System32\locale.NLS are not real file [l:20 {10}] "locale.nls": "
  Found: {l:32 b:wmYkySbnNnz5uBFxkqlZYwcQXpJF7VPzM7ezK / KmEmU =} expected: {l:32 b:KTJBpw1awVp4c5LesEXyEM / jfGsI24iQGrROSGLA9Tc =}
  2014-06-08 14:33:04, CSI Info 0000030b hashes of file members \SystemRoot\WinSxS\amd64_microsoft-windows-i... nal-Core-locale-nls_31bf3856ad364e35_6.0.6001.18000_none_c6d6cc5d61a33307\locale.nls is not actual file [l:20 {10}] "locale.nls": "
  Found: {l:32 b:wmYkySbnNnz5uBFxkqlZYwcQXpJF7VPzM7ezK / KmEmU =} expected: {l:32 b:KTJBpw1awVp4c5LesEXyEM / jfGsI24iQGrROSGLA9Tc =}
  2014-06-08 14:33:04, CSI Info 0000030 c [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"locale.NLS '; source file in the store is also corrupted
  2014-06-08 14:33:04, CSI Info 0000030 d repair results created:
  POQ 114 begins:
  0: move the file: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\8c0159154883cf0125320000380ccc0e._0000000000000000.cdf-ms', Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms'
  1: move the file: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\ac4f59154883cf0126320000380ccc0e.$$.cdf-ms', Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms'
  2: move the file: Source = [l:244{122}]"\SystemRoot\WinSxS\Temp\PendingRenames\2c6a5f154883cf0127320000380ccc0e.$$_speech_engines_sr_en-us_3201cbb7cd315cd0.cdf-ms', Destination = [l:156{78}]"\SystemRoot\WinSxS\FileMaps\$$_speech_engines_sr_en-us_3201cbb7cd315cd0.cdf-ms'
  3: move the file: Source = [l:254{127}]"\SystemRoot\WinSxS\Temp\PendingRenames\3c915f154883cf0128320000380ccc0e.$$_speech_engines_lexicon_en-us_bd71d54bf658e12b.cdf-ms', Destination = [l:166{83}]"\SystemRoot\WinSxS\FileMaps\$$_speech_engines_lexicon_en-us_bd71d54bf658e12b.cdf-ms'
  "4: hard link file: Source = [l:260 {130}] ' \SystemRoot\WinSxS\x86_microsoft-windows-s... chrecognizerenu.ale_31bf3856ad364e35_6.0.6000.16386_en-us_cbfb04a3abf30016\af031033.am', Destination = [l:100 {50}] '------? \C:\Windows\Speech\Engines\SR\en-US\af031033.am ".
  5: create file: file = [l:228{114}]"\SystemRoot\WinSxS\amd64_microsoft-windows-newdev_31bf3856ad364e35_6.0.6001.18000_none_6d94e6d8090688e9\newdev.dll', attributes = 00000080
  6: move the file: Source = [l:164{82}]"\SystemRoot\WinSxS\Temp\PendingRenames\3c6c7a154883cf0129320000380ccc0e.newdev.dll', Destination = [l:228{114}]"\SystemRoot\WinSxS\amd64_microsoft-windows-newdev_31bf3856ad364e35_6.0.6001.18000_none_6d94e6d8090688e9\newdev.dll'
  7: move the file: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\1c09bc154883cf012a320000380ccc0e.$$_system32_21f9a9c4a2f8b514.cdf-ms', Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_system32_21f9a9c4a2f8b514.cdf-ms'
  8: hard link file: Source = [l:228 {114}] \SystemRoot\WinSxS\amd64_microsoft-windows-«
  2014-06-08 14:33:04, newdev_31bf3856ad364e35_6.0.6001.18000_none_6d94e6d8090688e9\newdev.dll CSI Info", Destination = [l:68 {34}] '------? \C:\Windows\System32\newdev.dll ".
  9: move the file: Source = [l:220{110}]"\SystemRoot\WinSxS\Temp\PendingRenames\fccae2154883cf012b320000380ccc0e.$$_performance_02bd33cc045df684.cdf-ms', Destination = [l:132{66}]"\SystemRoot\WinSxS\FileMaps\$$_performance_02bd33cc045df684.cdf-ms'
  10: move the file: Source = [l:234{117}]"\SystemRoot\WinSxS\Temp\PendingRenames\4cffe5154883cf012c320000380ccc0e.$$_performance_winsat_ac47b36afb2fa68e.cdf-ms', Destination = [l:146{73}]"\SystemRoot\WinSxS\FileMaps\$$_performance_winsat_ac47b36afb2fa68e.cdf-ms'
  11: move the file: Source = [l:254{127}]"\SystemRoot\WinSxS\Temp\PendingRenames\4c70e8154883cf012d320000380ccc0e.$$_performance_winsat_datastore_34fe222e5de27d61.cdf-ms', Destination = [l:166{83}]"\SystemRoot\WinSxS\FileMaps\$$_performance_winsat_datastore_34fe222e5de27d61.cdf-ms'

  Hello

  We look also at the bottom line in the journal of the SFC, not just specific entries along the way.

  He would often have similar entries, but the line of low said unable to fix or repaired successfully.

  _______________________________________

  • Once the process is complete, you may receive one of the following messages:
  • Windows resource protection did not find any breach of integrity.

    This means that you have not all missing or damaged system files.

  • Windows resource protection could not perform the requested operation.

    To resolve this issue, perform the analysis in safe mode System File Checker

    (http://windows.microsoft.com/en-in/windows/start-computer-safe-mode)

    and make sure that the files PendingDeletes and PendingRenames exist under %WinDir% \WinSxS\Temp.

  • Windows resource protection finds files corrupted and managed to fix it. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log.

    To display detailed information on the analysis of system files and restore, go to the display of the details of the System File Checker process.

  • Windows resource protection found corrupt files but was unable to fix some of them. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log.

    To repair the corrupted files manually, see the details of the System File Checker process to find the damaged file, and then manually replace the corrupted file with a good copy of the file.

  If the message failed to fix some files and they are not the settings.ini errors (which can be ignored), you may need to perform a repair upgrade Installation.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ________________________________________

  Is to install Service Pack information:

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon

• Error code: 0 x 800700002, does not have support for the installation package ' Vista SP2 MBR Update, installing the Zune software for windows phone 7

  Original title: could not find the media to the installation package ' update of Vista SP2 MBR

  I need to install the Zune software to my windows phone 7 and I get this error message: cannot find media for error code installation package 'Vista SP2 Update MBR' 0 x 800700002. Please tell us what to do.

  Hi PamelaMaassen,

  You can read the following article and check if it helps:

  A required component cannot be installed when you try to install the Zune software

  http://support.Microsoft.com/kb/944938

  If you're still having problems, then post your query in the connection of support Zune for more assistance:

  http://answers.Microsoft.com/en-us/Zune.aspx#tab=1

  Hope this information is useful.

• Impossible to detect all bluetooth devices

  Hello

  I'm using Acer Aspire E1 - 571G laptop with windows 7 32-bit Ultimate edition. The problem is that I am not able to detect bluetooth on my laptop devices. Likewise, there is no bluetooth icon in my control panel. I have tried almost everything like uninstalling the device driver bluetooth and and rebooted my laptop has reinstalled automatically. I also checked and restarted support bluetooth, but to no avail. I even checked for update bluetooth drivers, but he refused that I already had the last being.

  I want to connect my wireless headset but couldn't is not detected. I can not look for my laptop even after activating the option 'allow discover... ". ».

  Here are some shots for your reference.

  (No bluetooth in the Control Panel icon. Bluetooth icon only that appears is on the notification in the taskbar area)

  

  (My bluetooth settings)

  

  (My Bluetooth adapter properties)

  

  If anyone knows how to solve this problem, please help me...

  Hi stephane,

  Thanks for posting your question in the Microsoft Community.

  You seem to have a problem with the use of Bluetooth devices on your computer. We will help you in the matter of fixing.

  Install the following update and check the status of the issue.

  Bluetooth devices do not work correctly on a computer that is running Windows 7

  http://support.Microsoft.com/kb/980396

  I also suggest you try the following methods and check if it helps.

  Method 1:
  Please use the suggestions contained in this help article and check the issue.
  Reference:
  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  (Also applies to Windows 7)

  Method 2:
  Please use the suggestions in this article and check the State of the question
  Bluetooth devices do not work correctly on a computer that is running Windows 7
  http://support.Microsoft.com/kb/980396

  Additional information:

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  I hope this helps. Please let us know if you more help.