Re: Disabled the connection Wireless on Win 7 - Portege R600

Similar Questions

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to disable the connection of identity when opening Outlook Express

  How to disable the connection of identity when opening Outlook Express

  In OE: File | Identities | Manage identities | Properties and uncheck the option to require a password.

• How to restore the connection wireless internet?

  Impossible to establish a WiFi Internet connection.

  
  

  Laptop can only connect via LAN. Connection Wi - Fi deleted while surfing online. don't know how to restore the connection.

  
  

  
  

  Hi WeiShangSing,

  To set up a wireless connection on Windows 7 computer, I suggest you to refer to section of the online help and check if it helps.

  Setting up a wireless network

  http://Windows.Microsoft.com/en-CA/Windows/setting-wireless-network#1TC=Windows-7

  If you use a wireless router, you can also see this link for help:

  http://Windows.Microsoft.com/en-CA/Windows/set-up-wireless-router#set-up-wireless-router=Windows-7

  If you are having problems with the connection Wireless to the computer please answer back with error message. If you need help, I'll be happy to help you.

• If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  Hello

  -You use Boot Camp as the Boot Manager? If so, make sure that all boot camp for Windows 7 drivers are installed.

  -You receive an error message?

  If you use Boot Camp, I suggest yo 1All operations from the below mentioned link and check if the problem persists.

  Boot Camp: Windows 7 Installation, frequently asked questions

  http://support.Apple.com/kb/HT3986

  For reference:

  Support for Boot Camp

  http://www.Apple.com/support/Bootcamp/

  Hope this information helps.

• Pavilion DV5-1015nr: How can I activate the connection Wireless on laptop DV5-1015nr?

  After upgrading my laptop DV-5-1015nr (x 64) from Vista to Win 7 wireless switch (just above the 'Insert' key) stays red, no matter how many times I press on this subject. In Device Manager, I see the Networl cards drivers I installed Win 7' work properly': Broadcom 4321AG 802.11a/b/g/draft-n Wi - Fi (sp45524) adapter and Realtek PCIe GBE Family Controller (Realtec v7.003.0213.2009).  HP does not offer a x 64 driver for the latter, so I got it from Realtek.

  Here are the steps I've tried so far:

  1 makes sure that Windows Explorer has been implemented.

  2 start-> Control Panel-> Network Sharing Center-> manage network wireless-> add-> manually create a profile network-> used the settings on my smart phone which is able to connect to the Internet:

  ~ Network name: 52GT6

  ~ Type of security: WPA2-Personal

  ~ Encryptiontype: AES

  ~ Security key: XXXXXXXXXXXXXXXX

  ~ Start this connection automatically: Yes

  ~ Connect even if the network is not broadcasting: No.

  3. click on 52GT6-connection > tab-> select as follows.

  ~ Automatically connect...: Yes

  ~ Connect to a more preferred...: No.

  ~ Connect even if the network is not broadcasting...: No.

  ~ Activate the WLAN connection setting: Yes

  4 OK.

  I click on 'Connect to a network' and receive a notification that "no connection is available. Running a diagnostic feature of "Troubleshooting" reports that the 'wireless capability is turned off." By pressing the switch wireless does not turn on the wireless feature.

  I went to this problem all day. Anyone able to help me?

  Hello:

  See if it works...

  First, install this driver update wlan...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_95652_2

  I would change the same connection if not broadcasting setting to yes.

• Toshiba Software by disabling the automatic Wireless Configuration Service

  I have a problem with a Toshiba Satellite Pro laptop. When I start the system, the automatic Wireless Configuration Service is disabled and I have to go into Services and start physically whenever I start Windows (XP 32-bit sp3).

  I think it's own software of Toshiba (Q-Connect/Summit?) it prevents start automatically with Windows, because everything else is as it should be.

  Can you advise how to fix this so that the service always starts automatically and does not, during the trip, the settings for windows? Set up a wireless ad - hoc is quite difficult because there is no more headaches.

  See you soon,.

  John

  Hey Buddy,

  It s I don't know ConfigFree turns off this feature of Windows... As far as I know it s necessary service for all WLAN configuration tools

  Is manual start automatically, or simply the value type? You must assign it automatically.

  By the way: what laptop do you have?

• Reconfigure the connection Wireless on Satellite M160

  My wireless seems to have gone wrong somehow. The computer will not pick up or connect to my network. Is there a way I can reconfigure the connection?

  Hello

  Of course, you can reconfigure the WLan settings.
  First of all, I would recommend resetting the router Wlan. Check the settings of WiFi, filtering by mac address, SSID name encryption.

  How have you tried to connect to the Wlan? Did you use the 3rd party Wlan client configuration tool (Intel, Atheros) or did you use the Wlan configuration option to own Windows?

  If you use a 3rd party client WLan configuration tool, then the windows own option should be disabled.
  I recommend to go through all the settings (encryption key, ssid) and please check if everything is good.

  By the way; Please don t forget to activate the wireless on your laptop network card ;)
  The switch on the side of the laptop must be turned on, and you should switch to WLan using FN + F8 key combination.

  Good bye

• Disable the default wireless on Acer Aspire 5741

  I have an Acer Aspire 5741-5698 running Windows 7.  I never want to connect to wireless internet.  I want to only rarely connect with a wired connection.  I can disconnect the wireless by pressing Fn + F3, but I never see a "Launch Manager".  The problem is when I turned off the computer and turn it back on, it by default, a wireless connection.  I went to manage networks wireless in Control Panel and manually selected connect to my home network.  It does not work.  How can I stop to automatically connect wireless?

  Go to the device, click Manager right on the wireless, then click on disable. When you want to use the wireless go back and click Activate.

• HP Envy 15 J6Z08EA #UUW: disabling pop-up message when the connection warning me that I have disabled the connection of the fingerprint

  I want to remove an annoying message when connecting. I disabled the fingerprint reader, because it makes my games to the tab down whenever I accidentally touch the reader. And it is placed "below" on the left side of the keyboard (keys WASD, if you understand me) who thought that might be a good idea.

  Now I get these messages of connection warning me that the fingerprint is not enabled, every time I started the computer, make me when entering my password to start over from the first letter, so that my password is messy (if I had the password: 'password' that would make me write pass) , and then the popup would come, that I have to click down, and then if I write "word" it originally make my password 'wordpass' test, if you understand. So it's a manufacturer 'fault' I'm trying to fix. Any tips? Is the way to activate only the reader of fingerprints to be active during the connection and not when already connected. Or how to remove these popups WARNING when connecting.

  Hi there SimonWoss,

   

• Disable the connection on PIX 7.0

  Nice day!

  How clear (reset) specified connection (defined by the source/destination/port port pair) on PIX 7.04 If nat-control is disabled and xlate not use?

  Thank you!

  You may use the shun command. This resets the connection but also will block future connections from the IP source address corresponding, ports and protocol specified in the shun...

  "Step 1 if necessary, to display connection information by entering the following command:

  See the hostname conn #.

  The security apparatus displays information about each connection, such as the following:

  TCP on 64.101.68.161:4300 in 10.86.194.60:23 idle 0:00:00 bytes 1297 flags UIO

  Step 2 to escape the logins from the source IP address, enter the following command:

  HostName (config) # shun src_ip [dst_ip src_port dest_port [Protocol]] [id_vlan vlan]

  If you enter only the IP address of the source, all future connections are rejected; existing connections

  stay active.

  To delete an existing connection, but also connections future blocking the source IP address, enter

  the destination IP address, source and destination ports, and Protocol. By default, the Protocol is 0 intellectual property.

  Step 3 to remove the shun, enter the following command:

  "HostName (config) # no shun src_ip [vlan id_vlan].

  I hope this helps... Please note if it is!

• Rename the name of the connection Wireless in Windows 8

  In Windows 7, it was possible to change the name of the wireless connection to something meaningful (what a concept). For example my home wireless with ssid xxxxxxxx be named home wireless. When I connected to the Office Wireless (with a ssid of yyyyyyyy) he would be named Office Wireless.

  This seems to be is no longer possible in Windows 8. Microsoft is way too much fun playing silly blighters. They have really taken to a whole new level with this OS.

  After much research I found how to rename a wired connection, but not wireless. For the life of me I can't figure out how to do this.

  I'm * NOT * request your opinion on whether I should do this. I ask * HOW * to do this. (Futile attempt to ward off the unnecessary and inevitable "you shouldn't do" or answers "I don't see why you would want to...) »)

  Maybe what you are looking for requires you to access the registry to make the name change.

  HKLM\Software\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles

  Browse the list of profiles to find the one that you need, and then change the value of string ProfileName.

  You can also do this when you change wireless cards and to reconnect to the same network and the connection then presents itself as 'name 2 Wireless' or ' wireless 3 "instead of just"wireless name' name, you can delete old profiles of the same name, and then rename the current without the number on the end. "

  After changes simply refresh your list of network connections to view the changes.

  As always, changes in the register are not advised, so with caution, take a backup before you change etc etc.

• Disable the connection on the Help menu in Adobe Acrobat Pro ms

  Hello

  I use Acrobat Customization Wizard to build my Acrobat Pro DC package for SCCM hollow dist.

  I disabled all the Document Cloud services that removes the possibility of signing through the Welcome screen, but the ability to do this by using the help tab is still there. But since the Cloud of Document services is disabled it gives just a clumsy error.

  Is there a way to remove this choice in the Help menu?

  

  Use of the registry keys to disable the help of more > connect / disconnect

  For continuous Build:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Adobe Acrobat\DC\FeatureLockDown]

  "bSuppressSignOut" = DWORD: 00000001

  For the classic Build:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Adobe Acrobat\2015\FeatureLockDown]

  "bSuppressSignOut" = DWORD: 00000001

  by Karan Malik November 18, 2015 10:32

• Disable the connection / disconnection (Adobe Acrobat DC)

  How can the option "connection / disconnection" (Menu: help > login / logout) are hidden / disabled (Adobe Acrobat DC)?

  Currently, the following data in the JavaScript file is stored:
  app.hideMenuItem ("DetectAndRepair");
  app.hideMenuItem ("OnlineSupport");
  app.hideMenuItem ("LearnProduct");
  app.hideMenuItem ("About");
  app.hideMenuItem ("AboutAdobeExtensions");
  app.hideMenuItem ("endAboutPlugInGroup");
  app.hideMenuItem ("SystemInformation");
  app.hideMenuItem ("endGuideGroup");
  app.hideMenuItem ("endUsingGroup");

  Or could "SignIn / Sign Out ' (Menu: help > connection / disconnection) are disabled in the registry?

  Use of the registry keys to disable the help of more > connect / disconnect

  For continuous Build:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Adobe Acrobat\DC\FeatureLockDown]

  "bSuppressSignOut" = DWORD: 00000001

  For the classic Build:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Adobe Acrobat\2015\FeatureLockDown]

  "bSuppressSignOut" = DWORD: 00000001

  -Karan

• Disable the button Wireless Laser Mouse PA3706E Alt + Tab?

  I have what I think, it's a mouse Toshiba PA3706E (it's the one in the picture below)

  It has a small button of Alt + Tab at the worst place in the fact that it could be, and I was wondering if anyone knows a way to disable? I installed the thing that comes with it to change the functions of the buttons, but for some reason, it is the only button you cannot not change or not. The only option for the Application Switch button is Alt + Tab.

  http://img340.imageshack.us/img340/8080/mousedriver.PNG

  Anyone? It's makes me absolutely crazy and things like TF2 happens to crash when it Alt + tabs; -

  > Is it possible to disable it, as pilot/configure CD software that comes with the mouse wont allow it.
  Well, if the software that came with the mouse, does not support this option, then I put t see any other possibility to disable the button ALT + TAB.