Re: Dual mode does not not on Satellite A200-10W

Hello

I m using Toshiba Satellite A200-10W but I suddenly found that the mode of double in my touchpad no longer works!

My OS is Windows XP Service pack 2.
By the way I checked what written here [http://aps2.toshiba-tro.de/kb0/HTD9702NL0000R01.htm] and I found all my settings are correct!
Is it possible to restore double to my touchpad mode?

Post edited by: sshehab

Hello

Maybe stupid question now but what do I tell exactly with dual-mode touchpad?
Have you checked the touchpad settings?

Tags: Toshiba

Similar Questions

  • Memory card Toshiba does not on Satellite A200

    Hello.

    When I turn on my laptop (Satellite A200) often, but not every time, I get a bar at the top of the screen that reads "Toshiba Flashcards (does not". ")"

    Sometimes this can be removed by clicking on the Red Cross in the corner of the bar and after a few moments he does not disappear, but other times it stays there and there seems to be no way to get rid of him.

    Can someone help me with this problem?
    You can probably tell from what I am not a computer expert and a simple language would be most appreciated!

    Try this:

    Updated the BIOS, which can be downloaded from the Web from Toshiba site
    Uninstall the Toshiba Value Added Package
    Download and install the latest Toshiba value added together on the Toshiba site

  • Does not start Satellite A200 - checksum of the header file is possibly corrupted

    Does my Toshiba Satellite A200 on Vista.

    The following message appears on the screen: "the file is maybe damaged. The checksum of the file header does not match the checksum calculated.

    I tried reinstall drive, but it does not solve the problem.
    The following message is displayed: status: = xc0000428 (as well as instructions that do not seem to help at all).

    What can I do?

    Hello

    You mean that the new installation of operating system using Toshiba Recovery disk didn't?
    Hmmm, in this case, it seems like a RAM problem

    I searched a bit on the net about this error and found some info that might be linked to the faulty RAM memory.

    You should try to verify if a single one single module of RAM is affected.
    Otherwise you need to replace the two modules and then should try reinstalling the operating system.

    Welcome them

  • Wireless communication switch does not work - Satellite A200 - 23 c

    The laptop has been included, and both a WI - Fi connection stopped working.
    Wireless communication switch does not work. Do not ask is it possible to do?

    Your English confuses me a bit little, but can you please tell me what model of laptop you have and what is the problem here?

    Wireless network card is enabled correctly in Device Manager?

  • Guest mode does not appear on my sony S1 Tablet

    I have the Sony Tablet S1 but the guest mode does not present as an option where it should be in the upper right. I've checked everything and I am on the correct operating system, but it is not yet here.

    I did a factory reset and now I can see and use the Mode guest, try it and let me know if this worked for you too, good luck!

  • XP mode does not recognize my 6023E PCI card

    I bought a new Win 7 with a PCI slot inherited to execute an OLD NI PCI-6023E card I used for years.  I downloaded the drviers legacy NOR (7.4), but he does not see the card.  When I look in Win 7 the card is there but I can't run the 64-bit drivers testament and with my old software (C++).   I have connected a NI USB-6008 card and was able to open the card in XP mode... any ideas?

    Unfortunately, XP mode does not work with the PCI/PCIe devices, only those USB. Most (all?) programs virtualization will have this limitation.

    As you probably expected, the General recommendation is to migrate to the API OR-DAQmx for your application if you want to that support on Windows 7.

    If this is not possible, then there is a section of the knowledge base on a Beta OR-DAQ traditional (old) for Windows Vista and 7 , who might be interested. At a minimum, it will take allows you to use a 32-bit installation of Windows 7, not a 64 bit.

  • OfficeJet Pro 8620: Sleep mode does not

    "Sleep" mode does not work on my new settlement 8620. I tried to change the duration of sleep from 5 min. to 10 and 15, but he was not asleep yet. I tried to close and restart the unit, but that did not help. 2 times the unit did go to sleep, but then he woke up after a short time.  Any suggestions?

    Hello

    Fitrst ensure that the printer has the latest firmware:

    http://support.HP.com/us-en/document/c04083718

    More don't forget to connect its completely directly to a wall outlet and not by some power strips, surge protectors, etc.

    If the same results persists, try temporary disconnect a cable from the back of the printer in order to isolate any possible cause (e.g. fax, USB cable, etc.), remove one cable at a time and to check for the difference.

    I suggest starting with telephone wires, telephone line condition as example may prevent the printer from sleep remaining.

    Please let me know the results,

    Shlomi

  • Sansa e260 MSC mode does not show my files

    I never have problems with my player sansa until today. I just updated the firmware and now MSC mode does not work correctly. None of my files on the Sansa e260 player appear, do just the default values. However, everything is there when I go through my sansa player, but he does not appear in the player. No clue as to how I can solve this problem, so that the files that I have in my sansa player appear in the disc again? Any help is appreciated, thanks!

    The music on the e200 series folder is "hidden". Maybe that is. Change the settings in Windows to "show the hidden files and folders" and see if that helps.

  • Windows vista Theme it's not uninstall and safe mode does not work

    I try to uninstall the windows vista theme, but it is not uninstalled. A black screen is coming, and it is disappearing. I also try to uninstall the theme of windows vista by creating my new account, but it is not uninstall same problem is coming. I also try to uninstall by opening my PC in safe mode. but my safe mode does not open

    I hope you answer me as soon as possible.

    Hello

    Follow the link

    http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  • Xperia Z2: Stamina mode does not aparently

    Hello

    Endurance mode does not work on my phone aparently. I have try all configurations, but the sotware disable wifi and mobile data operator when I block, or turn off the camera screen. I continue to receive information from applications and I did not any exception on the configuration of the endurance. Any idea to solve this problem?

    Hello.. To do this
    Go to settings
    Apps-> all-> the controller in eco mode
    And empty the cache and data... Before you click on stop and restart your phone... It should work

  • chrome on windows 8 metro passes automatically mode does not.

    chrome on windows 8 mode does not, change in the subway. Browser is blocked in the background. I can't go back to desktop mode because the browser is not accessible. Tried to reboot the computer, but no use.

    Hi reda,.

    Thanks for posting your question in the Microsoft Community.

    I appreciate your efforts in getting the problem solved. I will definitely help you.

    The description of the problem, it seems that you have problems with the help of Chrome in desktop mode.

    Please answer the following questions so that I could help you further:

    1. Did you of recent changes made to your computer?
    2. Do you get any error messages?
    3. You have a parallel operating system installed?

    Try these steps and come back to me with the results:

    1. Alternative browser
      Download another browser like Internet Explorer or Mozilla Firefox.
    2. Default browser
      Chrome can run using the subway if configured as the default browser.
      You can search for "Set your default programs" in the start screen and click 'Settings' in the right pane. Then select Internet explorer (or other browser) in the list and click on "set this program as default.
    3. Chrome for the Office
      Uninstall Chrome app by right-clicking above and selecting "uninstall." Then, install the version of Office Chrome from here: https://www.google.com/intl/en/chrome/browser/?hl=en&brand=CHMA&utm_campaign=en&utm_source=en-IN-ha-bk&utm_medium=ha&utm_term=%2Bchrome

    If this does not resolve the problem or you need help, feel free to reply to this message.

    Ashwin

     

  • Dremweaver CS6. Design mode does not work.

    dreamweaver.jpg

    Hello.

    Design mode does not work.

    I got this instead of the normal display mode.

    What's wrong with it?

    Kind regards

    NATA

    Go to the main toolbar and choose View > happy head and turn it off.

  • Debug mode does not

    Hello

    We are in the process of migration of the APEX v3.2.1 on the database 10 g to v4.2.1 on database 11 g. APEX APEX is installed fresh on 11g. I was testing imported and exported of v3.2.1 application in v4.2.1. I was not able to activate the debug mode in the developer bar when the application runs. The url changes, but no debug information appears as was the case in v3.2.1. I see a partial set of debugging information when I open then see the debug window in the bar of developer. This show of debugging is incomplete. By that I mean I don't see not session state change and I don't see any information in the function "wwv_flow.debug".

    I read in a thread for an earlier version 4, toggle the debug field in edit application properties and apply, but that no longer works. Something to note is that when the debug field in edit application properties was set to NO, I don't have the error "Debugging is not enabled for this application" when you turn on the debug mode.

    I created a zero of application form and debug mode does not work either.

    There is a global setting in administration somewhere I should activate to get debug information in the page as in v3.2.1?

    dominiquefortin wrote:

    We are in the process of migration of the APEX v3.2.1 on the database 10 g to v4.2.1 on database 11 g. APEX APEX is installed fresh on 11g. I was testing imported and exported of v3.2.1 application in v4.2.1. I was not able to activate the debug mode in the developer bar when the application runs. The url changes, but no debug information appears as was the case in v3.2.1.

    No debug information appears online in the APEX 4.x page. All of this appears in the debug window.

    I see a partial set of debugging information when I open then see the debug window in the bar of developer. This show of debugging is incomplete. By that I mean I don't see not session state change and I don't see any information in the function "wwv_flow.debug".

    Note that the debug window contains an interactive report that applies a default filter for the last visited page. You might not see the report of the desired page. Remove the filter from the page to see all the currently available debug reports. There are also separate reports for each page show/accept, then make sure that you select the correct phase.

    I read in a thread for an earlier version 4, toggle the debug field in edit application properties and apply, but that no longer works. Something to note is that when the debug field in edit application properties was set to NO, I don't have the error "Debugging is not enabled for this application" when you turn on the debug mode.

    I think maybe I saw a bug for this, but I can't find a reference at the moment.

    There is a global setting in administration somewhere I should activate to get debug information in the page as in v3.2.1?

    N ° all debugging information are now displayed in the debug window.

  • Satellite A200-10W: I lost dual-mode Touchpad after Windows update

    I got a satellite A200-10W. The touchpad worked well at the beginning. Then, an update of windows has been installed and I lost dual mode on my touchpad.

    It is for me a normal function as a touchpad, but the mode button does not work. It lights, it do give me the button options, volume control does not work it did not scroll even in normal mode either.
    I reinstalled the drivers both synaptics and alps, but nothing helped.

    How can I ever use dual-mode again?

    Thanks for any help!

    Hello

    Very strange I didn't noticed any problem with the touchpad after the windows update.
    I have updated my windows and then lost the sound. After restarting again I ran the update and the Øresund back

    But if you, it seems that the MS updates could be a bad influence on the functions of touchpad.

    Have you chosen the touchpad drivers just for the PSAECE series?
    The Synaptics Touch Pad driver to set the properties and the touch pad control functions.
    And the Alps Electric Touch Pad Driver allows you to set the properties and functions of mouse control.

    Perhaps you need to configure the settings again after the new installation of drivers touchpad?  :|

    But have you tried to update to Windows Vista again? Sometimes, you have to restart the laptop to get all the necessary updates that will fix the problems.

    In a value of the case, recover the laptop and does not perform the updates of windows

  • Re: By Satellite A200-10w supports RAM PC2 - 6400 DDR2?

    HI guys,.

    Please I want to know is my [toshiba a200-10w | CT_ID 127560 = http://gulf.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?LNG=13&service=AE&PRODU & DISC_MODEL = 1] supports RAM DDR2 PC2-6400 memory, because I need to update my ram but all what I found on the market is DDR2 PC2-6400.
    I already had 1 module 2 GB DDR2 PC2-5300 installed, so if I get 2 GB DDR2 PC2-6400, it will run or not?
    And if it will work the feature dual channel will be work?

    On the HARD disk, what is the maximum capacity of the HARD drive that I cannot in stall in the same model because I have 1 TB, so it will work?

    PS: my OS is windows 7 Professional...

    Thanks a lot guys...
    Sheriff

    Hello

    The laptop supports Intel® 945 GM chipset.
    This chipset supporting 533 MHz max.
    So if you plug in modules of memory 667 MHz, the system would still works at 533 MHz.
    The modules are DDR2 so I put t see any reasons why the dual channel does not work in your case.

    > On the HARD disk, what is the maximum capacity of the HARD drive that I cannot in stall in the same model because I have 1 TB, so it will work?

    Laptop supports the SATA interface. The SATA controller has no limitation to the size of the HARD drive, so, theoretically, you should be able to use this large HDD but to be honest; I've never used this large HDD. The largest that I used in by cell phone was 500 GB and it was big enough.
    However, you will need to test b e100% sure.

    Welcome them

Maybe you are looking for

  • Added value to Toshiba package would not move

    Hello My name is Eric and I bought a computer laptop toshiba satellite A110 (psab6) and upgraded to windows vista. "I tried several times to install toshiba value added but I always got an error message saying ID_ERR-NOINSTALLTVALZ_MESSAGE. What I su

  • no pilot of the aircraft were found when trying to install windows 7 on a new construction

    It is a new construction: card mother Asus M4A87TD/USB3, Phenom X 4 965 processor he's, with 1 64 GB Soild State drive which is where Windows 7 Pro must be installed, Raid 2 500 GB SATA hard drives that I use, total 8 GB memory Dual Channel DDR-1600

  • ' * ' instead of text

    Hello I have a simple question, but I couldn't find the answer in the api of the rim. My problem is-i've got a BasicEditField: BasicEditField _bef = new BasicEditField ("Password", ""); later, when the user writes smth about her, I want that instead

  • Windows 7 screensaver not working do not, can not even get a glimpse of their

    Hello I'm having a similar problem as others who have posted in this screen savers do not work o my machine (Win 7 Ultimate 32 bit), I can't even preview any screen saver. I ran some of the suggestions in other posts without result. I have a combinat

  • BlackBerry Smartphones LED CHARGING LIGHT

    This may be a dumb question... but by loading the storm... the LIGHT flashes... when the LED flashes more... Does this mean that its fully charged?