Re: Equim A60-191 - overheating

I know its an old machine, but worked very well until I reformatted, (he gave to my daughter) but keeps overheating and stop now.

Load all the latest drivers etc. I would be grateful if anyone had ideas cos it's a good machine spoil now.

Thank you.

Hello

You can do with this old machine better clean it upward, but on a career path. With other words specifications must be dismantled.
You wrote, it's old machine, so I assume that the cooling fan and cooling grill is full of dust.

After cleaning for laptop can take a deep breath and be cooled properly.

Tags: Toshiba

Similar Questions

  • Low screen on my Satellite Pro A60-191 image quality

    Hello

    Today, when I came to this site I noticed it is of poor quality lines down on the grey area of this site (under the TOSHIBA logo) I can't show you because the camera does not have a picture of the lines. also when I go on to a new folder before the lines dissapaer site! and as it happens on some other programs aswell! sort of, it's just low quality lines towards the bottom of the screen!

    Thank you!
    Suddste
    TOSHIBA Satellite Pro A60-191

    Hello

    Sorry, but your explanation is quite puzzling to me. Is the value display resolution recommend an or even more?

  • Equim A60 unable to use TV USB 2 card

    Hello
    I bought a new equim A60 with the following specifications:
    Processor speed: 2.8 GHZ
    RAM: 512 MB
    Hard drive: 40 GB
    I tried to use the MSI VOX TV USB2 card and Terratec TV card on the laptop, but all do not work with my laptop even though he has worked with other laptops and my desktop PC.
    I tried the same cards with my own friends who is also Equim A60 and don't worry too much. I upgraded my bios but always the same story. Can anyone help me or this type of computers is not intended to be used with USB 2 Tv cards?

    Hi, when you say not working does not that mean that Windows does not have
    detect the USB device as a new device?
    Try all 3 USB ports if nothing happens take a look at the device
    responsible for the yellow markers. Also if you have another USB
    connected devices remove them also.

    Richard S.

  • Sound card on Equim A60 157

    Hi I just bought an Equim A60 157. and I just noticed that the speakers echo, I got my laptop pluged in my stereo but the sound echoes. is their fault with the sound card?
    can someone help me?

    It is not a fault, it is actually a feature of the Realtek sound card.
    You must click the icon AvRack it's on your desktop (blue crab)
    Somewhere there is an option to disable this feature or change the effects :)

    Richard S.

  • Equium A60 - 191 wireless lan mini pci

    Hello
    I have a Toshiba laptop Equium A60-191.
    I wanted to know if I can install a wireless LAN card mini pci on this model. Does anyone know the procedure.

    Thank you
    Vikram

    Hello Vikram

    I found the information that your device is not ready WLAN. This means that your device has no antenna WLAN. If you want to use the WLAN you must buy card PCMCIA WLAN or WLAN USB stick.

    Good bye

  • Problem of graphics ATi Radeon Equim A60-181.

    I have a new laptop Equim and the Sims 2 has an intermittent problem when the game freeze sense I have to turn off the laptop and turn it on again. Windows load and everything's fine until the next time I play. However, sometimes, I receive an error message that says ati2dvag.dll failed. The game will exit and return to Windows but clocked at minimum resolution to low colors. A reboot solves the graphics.

    Either may occur at any point in the game. The cell phone is a new model of Toshiba Equim A60-181, the graphics chip is an ATi Mobility Radeon 7000 IGP (64 MB shared). There is no new update for the ATi card, according to the website of Toshiba s; the there is the same version number. I was told that I should use the supplied Toshiba driver and not the ATi site because the portable versions are often customized. That's what I tried:

    -J' used an ATi removal utility to remove the driver and re - install the same version on the Web. No difference.

    -It's not too selfish of applications running in the background when you play.

    -Run the game in windowed mode, with no noise (by adding switches to the shortcut). The game didn't freeze during this operation, but did display the ati2dvag.dll resulting in an output error. Happen when changing to a different Sim s House. I put t know if its a coincidence.

    After reading around the error is not uncommon, but the 'right' solution is very difficult to locate. I'm a reasonably competent user and have solved the problems of driver/software before, but I'm out of ideas. Can anyone suggest something fresh? I am brave enough to try anything with instructions! I hope that the post is clear, if it's not ask and I will clarify. Any advice is welcome because I am now desperate to get my new laptop to play my favorite game.

    Thank you very much!

    With a recent hollow on google, it seems that a lot of ppl are having
    problems with this game. Out of curiosity I tried
    change the profile system Normal or full power?

    Richard.

  • Equium A60-191 - need a new recovery disk

    Hello. Anyone know where I can get a cd recovery Toshiba Equium A60-191-the one I was badly scratched and I need a new - can I download one on line?

    Any help would be greatly appreciated. Thank you
    Dee :-)

    The recovery disc can t be downloaded.

    If you need a new recovery disk, you need to ask your local ASP. They can order.
    On the Toshiba site, you can search an ASP:
    http://EU.computers.Toshiba-Europe.com/ > support & downloads > find an authorized service provider

  • Equium A60-191 - blue screen at startup

    Hello

    I have a laptop Equium A60-191. When I start it, I get a blue screen and it tries to re start it again. I started from my Windows CD and used the recovery console to fix the problem. He now works ok. However, the same thing that happened there are only 9 months.

    Has anyone seen this problem before?

    Thank you

    In my opinion, this kind of problem has thousands of PC users with all kinds of laptops and desktop PCs. really nothing exceptional and there is no reason that a why this happens.

    If now everything is Ok I see no reason to talk about this. Once again, if the same thing happen please report only and maybe we can discuss your problem.

    Bye and happy new year!

  • The motherboard Equium A60 - 191 necessary UK provider

    About 8 months ago, I bought this toshiba Equium A60-191. I need another motherboard for it, everyone would be able to help because I can't seem to find suppliers for this. Cheers mark.

    Hello

    I think you should contact a Toshiba authorized service partner. They should be able to give you all the parts. You can find one here:
    https://EU.computers.Toshiba-Europe.com
    -Support & downloads - find an authorized service

    Good bye

  • Equium A60-191: 'request could not be performed because of an i/o device error. "

    I have an Equium A60-191 my dvd drive has stopped working, the led on this subject is on all the time like his who seek constantly.
    It does not read the CD or dvd and gives an error "REQUEST COULD NOT BE PERFORMED DUE TO A DEVICE IO ERROR.

    I tried to remove and reinstall the drive from the Device Manager, it doesn't help. I also tried to boot from the drive computer, but does not start, so I think that the drive does not work.

    I also noticed that the motor does not work in the reader, because that drives don't spin. Device Manager indicates that the drive works properly. Anyone know what is this error?

    1. click on start
    2. right click on my computer
    3. Select manage from the menu that appears
    4. in the computer management window, select Device Manager
    5. in the right pane, click to expand IDE ATA/ATAPI controllers
    6 identify your CD/DVD drive in the menu expanded and right click on the appropriate drive
    7. Select Properties
    8. in the Properties window, click the Advanced Settings tab
    9. in the Transfer Mode box that represents your CD/DVD drive (typically device 1), open the menu drop down and select PIO only
    10. click OK and exit all windows.

    If this does not solve your problem, then you need to go back using the procedure above and change device 1 to #9 step will support to 'DMA if available '. Then, change the device 0 to "PIO" only in the Transfer Mode box.

    Device 0: Primary IDE Channel
    Unit 1: Secondary IDE Channel

    Of course, he could also be dead DVD player. In this case, a new drive should solve the problem.

  • Equium A60-191: upgrade graphic integrated processor

    Hi, new,

    I was wondering if I could spend my processor integrated switch to something better (anything!) I have a TOSHIBA Equium A60-191 with an ATI Mobility Radeon 7000 IGP.

    Thanks (please answer)
    Thanks again!
    Oh and thanks again!
    Suddste000

    Hello

    as far as I know, it is not possible to update the graphics card in a laptop.

    Good bye

  • Satellite Pro A60 - is overheating and shuts

    Hello

    I have a problem with my A60. I start and everything goes OK. I put in a temporary monitoring software because it works for awhile and then just stop. What I see happening now, is that it will heat up to 65 then the fan comes on and at 55 it stops. This can happen a few times, and then he forgets turn on the fan. After that he climbs slowly until she happens to 85 when he cuts. I bought a stand 3 fans and now it stays on as long as when it goes on the fan circuit anointed, gets it to 77-80 and stays on. The problem is if I USE then overheating and stop again.

    What control actually (and fails to start) the fan cut in the process. This part of the function of the BIOS? Updated BIOS ver 1.7 to ver 1.9 will make a difference? I'm afraid that this update will not end before overhearting and I'll be left with an unusable machine.

    Any ideas?

    Thank you.

    >.. .a finds a way to fix it properly.
    This type of hardware components are not fixed but replaced so if you think that the cooling fan is defective exchange it.

    One more thing, the vacuum cleaner is OK, but you can't wait to clean up your laptop to look like new. I disassembled my Satellite M70 and was surprised how much dust was inside.
    Just after the withdrawal of the ventilation openings, I was able to clean it properly.

  • Equium A60-191: number of Modem - only an analog phone lines are supported

    My Equium A60 has been turned on when lightning struck nearby and caused the power supply turn off and turn back on.

    The OS is XP Home and my ISP is AOL. When I try to access the Net with DUN, I get the repeated error message:

    "Connected phone line is not compatible with this modem. Only analog phone lines are supported. »

    My desktop computer, which also uses AOL, always connects to the same phone line with no problems.

    I restarted the A60 several times; changed and I tried the 2 phone connection cables - both work; the phone line works very well; I reinstalled the driver provided on this site; removed the tick from the box that says to wait for the telephone line; verified that the modem is working and on the Device Manager list. All this is in vain.

    Convenience store suggests that COM 3 is not enabled. I don't see that com 3 listed in the device under Ports Manager.

    I tried Google and ASK with the error message. There is not a lot of posts, and it seems that the Toshiba modem is actually an Agere. This fact seems to be the object of some of the complaints.

    Finally, I uninstalled the driver/modem, AOL and another DUN connection. I restarted and went through the process of installing AOL and "new hardware". While the modem is on and allegedly working... I am still unable to connect to the Net. I reinstalled an additional 'pay as you go' ISP. When I try to dial a number on which it generates error 680. It does this even when the box is unchecked, to wait for a dial tone.

    I would be very grateful if someone could help it. I'm out of ideas.

    Thank you very much.

    Hello

    You are right, the modem supports the Modem Agere chip.
    You won't find the COM3 in the Device Manager for the modem uses a non-real com port. It s virtual com port.

    I think you should start the diagnostic tool test and check if the Modem has no malfunction.
    Additional you must remove the connection in the region Select utility and after restarting again create a new.

    I also found useful Microsoft article on troubleshooting network and dial-up connections.
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/trouble_all.mspx?mfr=true

    and you'll find info on the error of DUNS 680:
    http://www.Modemsite.com/56k/duns680.asp
    http://PHP.iupui.edu/~aamjohns/trouble.html#no tone

  • Equium A60 problem overheating and stand-by

    Yes, again, someone else has a problem with overheating Equium. I thought and knew that it was a foul, I checked the CPU and it looked like 2-4% and the fan still worked riot. But recently, I noticed when I press ctrl alt del to remove the Manager tasks, the CPU is more than 50% (73% was highest) and she quickly falls to 2-4%. When he's sitting their without programs or additional processes running. So I aint got a clue whats with her.

    The problem of confirmation suddenly started today. Usually, when I close the lid of my portable computer goes off standby. Today I did it, but after about 5 seconds, to be on stand-by there walk back by himself while the lid was still closed!

    So two problems here... lucky me. If anyones got any help to share its much appreciated, cheers.

    Eddie,

    The microcntroller of power on your responsible MB of the amount of current alternative used to charge your battery, and once the battery is fully charged no extra power is used. The battery must warm up all supported actually, but fully charged when it should then cool even when plugged into AC power.

    The adapter itself will always get warm (if it is not hot) when the notebook is turned on because it provides food for the notebook.

    EMI the single more general cause of overheating is the lack of air through the radiator of CPU, or because the radiator itself is blocked by debris (as described in the previous post excellent) article of air flows blocked by the bad location of the notebook.

    Excessive fan operation is an indicator course of the CPU, not too hot. If the radiator is clear (warm air can be felt through it), then the next most likely culprit would be excessive use of CPU in which case I would check in Task Manager to see exactly which processes were underway and who used the most CPU.

    HTH

  • Does not start Equim A60 - system is damaged or missing

    Hi, is there anyone who can help me to save my data I had on my laptop Equium A60. The system displays this message when I boot it "WINDOWS\SYSTEM32\CONFIG\SYSTEM" IS DAMAGED or MISSING. I got my disk to RESTORE but it clealy invite, a warning message that all my data would be lost for the default setting is installed. I will definitely use this disc, but before that I need my data. Please also note that Windows XP is running on my system.

    The problem occurred when I installed the drivers for a BLUETOOTH dongle. The installation was perfect but when I rebooted my windows the above error msg appears and I can't get into windows. I used the F8 key and tried all the option here but none of them worked and I took them to the same message.

    I would appreciate if someone can help me in this matter.

    THANKS AND BYE - ads

    Hello Adnan,

    There is unfortunately no way to load your operating system with the error you describe. As you have already discovered it does not load even in 'SAFE' mode

    This means that you only options for recovery are: -.

    1 reinstall the recovery CDs (which will lose all your data during the re-form)

    2 try to recover the situation by using a Microsoft Installation CD authentic (by using the Recovery Console)

    3 remove the hard drive from your laptop and screw (with a USB caddy) to another PC so that you can
    Retrieve your data befor using option 1 above.

    Option 3 would probably be your best way to recover and would mean that you would not lose your data.

    I also recommend that you invest in a proper backup strategy (possibly drive external hard USB and a utility such as Norton Ghost or Acronis True Image) so that you can protect your system from such incidents in the future.

    Kind regards

Maybe you are looking for