Re: Equium A200-1V0 using XP - Lan driver needed

I am new to this (and other) forum apologies if this has already been answered.

I had an Equium A200-1V0 that came with Vista Home installed. (As a working machine) asked me to install XP Pro on it instead of Vista.

Now I have ALL the drivers loaded and working with the exception of the Ethernet controller. I am at a total loss what to do I tried all I can find the drivers of which some of the Vista ones.

I can't determine if it is integrated into the motherboard or attached via PCI. I can't find any panel below to switch to a different PCI even though she might be under the keyboard (hated to take it apart too much yet).

Any help would be greatly appreciated.

The A200-1VO belongs to the PSAE6E series.
Please choose this series to install LAN driver!

Just a note; The laptop was equipped with the Realtek(10/100M) LAN chip.
If you wish, you can test a LAN driver on the Realteck site.

PS: If you use XP on this laptop Vista you must update the BIOS to the XP version.
It is very important to ensure that some laptops additional features will always be available and will work using the XP operating system.

Tags: Toshiba

Similar Questions

  • Equium A200-1V0 using XP - recent conversion issues.

    * Hi, *.

    * I recently inherited my laptop the girls, he had vista installed on it. I'm not a big fan so decided to install xp. I found a great guide on the forum, see below, (the topic is now locked) *.

    The original guide:

    + How to install XP Home on the following Vista laptop. 05/01/08 +.
    + PSAF5E + Toshiba Equium A200-1V0

    + Introduction
    + Here are the measures taken by us to remove our Toshiba laptop Vista and replace it with XP Home. There may be inconsistencies in our methods and we cannot have all the correct drivers installed, but everything seems to work OK for us. +
    + Our laptop now runs much faster, opens and closes more quickly and is more stable. +

    + This isn't a 5 minute operation. It should not be attempted by anyone with only a knowledge of passage of computers because it is very easy to screw things. The shop you bought your PC against them will load a lot to fix things and they will probably insist reinstall Vista! +
    + Be prepared that this would also probably negate your warranty. +

    + Luckily, I have a 2nd PC under XP, which allows me to access the web. This is very useful because it means that when your Vista machine is "broken" you can always find help and download the driver files. I also used my 2nd PC to create the XP installation updated the CD discussed later. +
    + You must have access to the web via a PC or another to get the necessary drivers. +

    + Method +.
    + First, even if you have Vista on your laptop, download and run a program of interrogation as "Belarc advisor" that lists all the drivers and software installed on your laptop. Print it out for future reference. It will be useful later when searching on the web for all drivers that may require updating. +
    + Now, make sure that you noted on all the necessary settings for your Internet connection. +
    + Also, back up the files that you may have placed on the hard drive you will lose the lot, including emails and the address books and web bookmarks etc. +

    + Unfortunately, the Toshiba disk that comes with this laptop does not appear to have all the required drivers with it. Instead, I think it relies on Vista keeping copy on your hard drive. It's not very bright that when the disk fails, you have lost everything! +
    + This means to go on the web and the search of all the required drivers run the XP successfully. +
    + Some we have found, for example the wireless network adapter, however this was not a problem because once we had installed XP and connected to the Internet through an Ethernet cable to our router, we were able to run 'Update Driver' for each missing item. +
    + Go to "Device Manager" via "Control Panel" then "System" and then "hardware". Then look for any yellow question mark for all the problems. Right-click and run 'Update Driver' for the Hardware Update Wizard and allow the PC to search the web "this time only. +
    + The ones we made in this way were: wireless adapter, Audio adapter. +

    + Unfortunately an original CD of XP SP2 does not contain the required drivers for this laptop. Therefore, when you start the CD it will be, after a few minutes of installation of files, say you have a hardware problem, there is no hard drive. +
    + To remedy this, you will need to download the right drivers Intel ICH8M SATA AHCI Controller. I could not find on the website of Intel, but on the contrary searched on Google for him. and he got to: http://www.alphadownloads.com/downloads/download-hp-intel-sata-ahci-controller-driver-ver--d-3064.html+

    + The other necessary drivers that we found on the web were: +.

    + Intel chipset device software installer +.
    Web page +.
    + http://downloadcenter.intel.com/Detail_Desc.aspx?agr=N&ProductID=816&DwnldID=14528 & strOSs = 45 & OSFullName = Windows * XP Home Edition & lang = eng +.

    + Or if this link does not try this: +.

    + http://support.intel.com/support/chipsets/inf/sb/CS-021273.htm+

    + Select 'Download Intel chipset software installation utility' on the left side, and then select your operating system "XP Home +.
    + Select "INF Update Utility - primarily for Intel 3, 900 chipset series ' +.
    + and download it. +

    + Driver Intel graphics: Mobile Intel (r) 965 Express Chipset +.
    Web page +.
    + http://downloadcenter.intel.com/Detail_Desc.aspx?agr=N&ProductID=2800&DwnldID=1438 8 & strOSs = 45 & OSFullName = Windows * % 20XP % 20Home % 20Edit ion & lang = eng +.

    + Or if this link does not try this: +.
    + http://support.intel.com/support/graphics/intelgm965/+

    + Now, select "software & drivers" on the left side and select your operating system "XP Home +.
    + You will be presented with a list of files. +
    + Select provided? ® Graphics Media Accelerator Driver for Windows * XP (exe) +.
    + and download it. +

    + Marvell Yukon Ethernet Driver +.
    Web page +.
    + http://www.marvell.com/drivers/driverDisplay.do?dId=175+

    + Or if this link does not try this: +.
    + http://www.marvell.com/drivers/search.do?reload=false+
    + On the right side, select ' W2000 / XP/2003/Vista x 86 & x 64 multilingual Installer (32-bit and 64-bit) for Yukon devices +.

    + Create the XP drivers disk +.
    + Add SATA drivers for a copy of your XP install CD using a program such as NLite. +
    + You have enough spare memory hard drive take a copy of your XP (about 700 MB) installation CD. +
    + Launch the program "sp37005.exe" and it will install on your hard drive. Do not install to a floppy disk. +
    + Download "NLite" of: http://www.nliteos.com/download.html+
    + When you run NLite it will probably say that you need to install ".net Framework", if so, quit NLite and go find the program. It is a Microsoft program that you can find by performing a Google search for the corresponding page on the Microsoft Web site. +
    + Now place your drive to install XP in your CD drive, if it autoruns, leave him. +
    + Run Nlite and follow the instructions on the screen. +
    + The program will ask where is your XP disk then it will ask you where you want to save the copy. +
    + On the screen "Task Selection", select "Drivers" and "Bootable ISO". Press "next". +
    + Select "Insert" and then "Folder pilot several" and now go and find your downloaded files of the SATA driver. Now, select 'All' and ' OK. The program will list the available SATA drivers. Select only the two that mention "ICH8M. Now press "next". The display will show the selected drivers. Press 'Next' and then 'Yes' to the prompt and then on "next" when done.
    + You are presented with the "Bootable ISO" screen. +
    + Put it a new inflammable CD in your CD burner, wait for it to be recognized and out any window that might appear to allow you to install files.
    + Now in Nlite, under "Mode", select "Direct Burn" +.
    + Under the 'Label' enter something like "XP for Toshiba Satellite A200" to identify the drive. +
    + Advanced settings to leave alone and now add the other required drivers by clicking on explore and copy them to the root directory to the temporary directory on your hard drive XP. It might be better to create a "Drivers" folder in the root directory to make them easy to find later. +
    + Now, click on the "Burn" button Now follow the remaining instructions to complete. +
    + You have now created an XP installation disc that contains your SATA drivers. +
    + - As you can tell, it of sound altogether, but avoids having to buy a USB floppy drive and it provides a neat solution. +

    + Hasta La Vista! +
    + Now you are ready to start the cleaning process, if you are brave enough to continue... +.

    + First, re-boot your laptop and the all start-up press F12 to change the boot order so that the CD-ROM/DVD-ROM is first. You can also use F2 and then change the Boot order from there. +

    + Now, insert your new XP installation disc in the DVD/CD drive and re-boot the PC, select boot from CD when you are prompted. +

    + The XP CD will now start copying the files and possibly display an options screen.
    + Select this option to install Windows. +
    + And then remove the hard drive C: partition (with Vista on) +.
    + Delete the partition used by Vista also F. +.
    + You will have to follow a lot of warning messages to delete the partitions. +
    + Now follow the instructions to create an NTFS partition on the C drive. +.
    + Now install XP by following the instructions. +

    + Don't worry that the graphics are a bit large as once Windows has finished installing, you can run the graphics driver you copied on the the XP CD to correct this. +

    + Run three driver files: +.
    + win2k_xp14311.exe Intel graphics driver.
    + INFINST_AUTOL.exe Intel chipset software installation utility ' +.
    + Marvell Yukon Ethernet Driver Setup.exe +.

    + Your graphics card must now improve and you should now be able to connect to the web (after the execution of the web Setup Wizard). But do not do this until you have installed your anti-virus software and firewall. +

    + Now go to "Device Manager" by "Control Panel" then "System" and then "hardware". Then look for any yellow question mark for all the problems. Right-click and run 'Update Driver' for the Hardware Update Wizard and allow the PC to search the web "this time only. +

    + If all goes well, everything should work OK now. +

    + Now go and have a drink to celebrate! +

    * After completing the installation, I found that I had no work wlan driver on my laptop. They are here (RTL8187B_WLAN_Adaptor), but with a big yellow question mark. I tried reinstalling them but it made no difference. I don't know why they don't will be will not installed properly.*

    * All went well and seem to work and all the familiar screens were there. I started using it and wanted to transfer some info from the laptop to my office. I copied the files on a disc using Ashampoo Burning Studio 7 and it seems to work, he went through the whole process without a hitch. When he had finished I checked the drive and it was empty he had no files on it at all. I tried several types/brands but the results (or lack of) is the same. The drive reads the discs will not drive write. Any ideas? *

    Thanks for reading this and I would appreciate any help/advice you may have.

    See you soon,.

    Mike

    Hello

    This means that everything is working properly without WLAN connection and burning the discs?

    Well, are you sure that your laptop is equipped with RTL8187B WLAN card? Therefore, you can check the vendor and device ID in Device Manager.
    But for all the portable Toshiba, you can download the driver WLAN here:
    http://APS2.toshiba-tro.de/WLAN/

    In addition, it would be interesting to know which drive you exactly used for the engraving process. I only use high-quality Verbatim and TDK media. I don t use Ashampoo or Nero, I use CD Burner XP because it the freeware tool and I can do anything I want with this program.

    Check it!

  • Equium A200-1V0 - recovery on the new HARD drive problem

    Hello

    Hoping someone can help, I just mounted a new Toshiba 1 TB hard drive for my Equium A200-1V0, used the Vista came with the computer recovery disk, everything seems to be installed ok, but when you try to start, I get a message saying that Windows Vista is unable to run on this hardware. Any suggestion is appreciated.

    Thank you

    There must be a compatibility problem. Usually the hard drives up to 500 GB are not problematic for the old machines.
    If possible, try to install the version of the OS. When you can get Win7 32 bit would be great. Win7 32-bit is supported for your machine and in my view, it will work perfectly.

  • Equium A200 - 1V0 with XP Professional software - looking driver for 3G

    We have recently installed XP on an Equium A200 - 1V0 but can't find the right driver to connect to 3 G internet.
    Any suggestions gratefully received!
    Zoe.

    Please can you tell us how you want to connect to the internet using 3G?
    It is unclear to me that your laptop is the 3G module inside. Can you confirm this please?

    I'm afraid you have misunderstood something and 3G can be used with an external display only.

  • Equium A200-1V0 - how to use the Toshiba Recovery CD product?

    I used the reinstall xp on desktop before but do not need to do a reinstall on your laptop (toshiba) with vista with their product recovery disc. With vista, I had to find my own drivers etc. after the OS is installed on a clean drive.

    I want to clean the disc by using a product of drive wipe as Dariks boot and nuke (used on office/xp computers some time and as a very clean before you reinstall drive) on my laptop Toshiba Equium A200-1V0 before inserting the product recovery cd.

    Questions-
    (1) is it ok to erase drive with DBAN - this usually effect the ability of the recovery CD to do its job?
    (2) how can I use the product recovery cd or it is free it is exposed just charge, boot from the cd and follow the instructions online?
    (3) it will return the laptop to the factory shipping status (i.e. don't have no need to look for the drivers, etc.)?

    Thank you very much for your help - just need to be reassured that have not is it a wipe and reinstall on your laptop and vista with a "recovery disc" (always a disc not specify that it is a full copy of the operating system

    James

    Hello James

    The recovery procedure everything is very simple and here are the answers to your questions:

    # You should not do. Before installing recovery starts the disk HARD integer will be automatically formatted, created new partitions and OS will be installed on the first
    # Start Notepad and press F12 repeatedly to enter the boot menu. When the menu is displayed a recovery media in the optical disc drive. In the menu choose the CD/DVD drive and press ENTER. Follow the meny on the screen. After that two or three click OK installation will be implemented.
    # Yes

    When the installation is complete just start computer laptop again and wait until the operating system will be prepared for the first start. It is not necessary to install any additional software.

  • Noisy hard drive Equium A200-1V0

    I recently bought an Equium A200-1V0 with Vista installed.
    I got it two weeks, I have barely any software, but HDD is impregnated with a really annoying crackling sound.

    It is not only during startup, even for the simplest of programs, such as word, brands of hard drive of my laptop this incessant crackling noise.
    I thought that the laptops are supposed to be quiet.

    Is - this usual?

    > I thought laptops are supposed to be quiet.
    ;) not. You can't say that all laptops must be altogether. As you know there are a lot of series of laptops that is designed for the different areas of work.
    For example: professional laptops are quite little, and don t support the high performance devices like for example graphics card to play games, but a X 200 was desigened to the game and it is much noisier because of high performance devices.

    However, to the noisy HARD drive
    I have 2 different laptops. Drives my M40 of Sam makes strange noises, but it works very well, so in my case I would exclude a hardware problem

    But who knows, maybe you HDD starts I have malfunction would recommend shows the additional HARD drive activities and to safeguard important data.

    Best regards

  • Equium A200-1V0: DVD-RAM UJ-850 s does not read data discs

    My laptop seems to have decided to stop reading data disks.
    However, there is no problem with the audio CD, but when I insert a data disc such as the software considers the disk is empty and try to format the drive.
    I searched internet day for solutions and tried without success to the following:

    Removed the UpperFilters and LowerFilters in the registry.
    Uninstalled and reinstalled drivers.
    Bought DriverWhiz (waste of money!)
    Tried to access disc command prompt that generated the message "incorrect function".
    Tried to use the enforcement function and access an exe file that I know is on the disk, but it comes up saying I need to format the drive
    Uninstall service packs
    I even thought it might be something to do with the MagicVirtual drive I had installed so I uninstalled completely which
    I uninstalled real player

    I'm about 3 minutes to destroy my laptop so any help would be appreciated.

    Laptop: Equium A200 - 1V0
    Drive DVD - RW: MAST * a DVD-RAM UJ-850 s ATA
    OS: Windows Vista

    Hello

    Deleting upper and lower filters was the first idea that I'd like to share with you, but it seems that you have already tried this solution proposal

    How about windows boot CD or a linux live CD?
    Is this possible?

    If not then I thing that the question could be linked to the wrong material work I m thinking on the issue of laser lenses eventually the laser lens can not calibrate properly and this could be a problem

    In this case, only a replacement CD/DVD drive can help greet

  • Equium A200 - 1V0 DVD Player error impossible of video output to an external device

    Hello
    I use my Equium A200 1V0 laptop with Vista Home Premium, and whenever I try to watch a DVD using the preinstalled Toshiba DVD Player software, I get the following error...

    "Unable to video output to an external device. Please spend your
    display the buttons on the unit by pressing the Fn + F5 after the end of the application. »

    I do not have an external monitor, and have never had a. (By pressing the Fn + F5 buttons does not work, because...) I have not attached external devices!)
    The software used to work properly, and I have not changed the settings at all.

    I have now tried to reinstall with the latest download from Toshiba, but the problem remains.

    Any thoughts would be accepted with gratitude.

    Bufster

    Hello

    I found a boyfriend of the solution.
    How?

    I searched simply here in the forum and found this thread!
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726

    Jack Black has posted a link to a useful Toshiba doc that says that this error is related to the Realteck sound driver.

    Update the audio driver and you must solve this problem!

  • Equium A200-1V0 - cannot copy video clips on DVD

    I am trying to download my dvd movie clips, I tried the DVD-R and DVD + RW discs and at the same time I get the message please insert a writable disc. I contacted Sony to ask why I am unable to copy clips (I have a sony HD camcorder) but they said I need to 'make sure that you put a recordable disc. This will depend on your computer disc drive if it is compatible with DVD-RW/RW. Please refer to the specification of your computer for more information. »

    I have a Toshiba EQuium A200-1V0, nobody knows what kind of disks would let me copy on them?

    I previously copied pictures on CD - R and had no problems with these.

    Hi sjdscotland,

    I m a bit confused what program you use to burn the DVD?
    What OS do you have?

    Normally, you can copy videos on the HARD drive first and then try to burn on DVD using Nero or CD Burner XP.

  • Need all drivers XP for Equium A200-1V0

    Where can I find a complete list of the drivers needed to install XP on this laptop?

    The driver on the Toshibas Web site search gives me drivers for a large number of laptops, but I don't know which ones to use because the 1V0 does not appear in the options.

    Includes drivers to an installation of XP SP2 using nLite the best way to do it?
    What I read the hard drive is the only thing that could be a problem when installing XP.

    You are right. Equium A200-1V0 seems to be don't appear only on the page of the European driver Toshiba at this time.

    I searched a bit on the net and discovered that this cell belongs to the * PSAF5E * series.

    This series is not released right now on the page of Tosh. Looks like we have to wait a while until all the XP drivers will appear.

    But if you want you can try to install the drivers of singles from another Satellite A200 series or satellite. Maybe they will work

    > Is to embed the installation of XP SP2 drivers using nLite the best way to do it?
    Well, the drivers can be included in the CD of the OS by using the nLite software, but I recommend including the Intel Matrix Storage Manger because without this driver HARD drive will not be recognized by Win XP Setup.

  • Equium A200-1V0 - SMART failed on start

    Hello

    I bought an Equium A200-1V0 just for more than a year. My problem is that he went really slow and really fast heat-up to the top.

    Now ever time I switch on a message appears
    "SMART failure provided on hard disk 2: Toshiba mk1237gsx-(s1).
    WARNING immediately back up your data and replace your hard disc.a failure may be imminent. »

    The laptop does not load on normal mode. There on the days just to check if it does load eventually but no result.
    All the world has experienced the same problem and found a solution?
    What I need to replace the hard drive or the problem to solve if some how to recover the laptop (I only ask because I read on another forum, he worked)
    Also, I have not received a recovery with the portable disk where I get that from?

    Any help is appreciated thank you!

    Hello

    SMART failure says it all! You need to replace the HARD drive permanently and that is also the reason why the laptop doesn't start in normal mode. Your HARD drive is defective and must be replaced!

    Reinstallation of the operating system using the Toshiba Recovery disk doesn't solve this problem. A failed HARD drive has nothing to do with the OS and software.
    Also if you have Vista you can create a recovery disc yourself. Normally on the first boot, you get a message that you should burn this disc using the Toshiba Recovery Disk Creator.
    If you didn t it yet you can order a Toshiba recovery disc directly:
    https://backupmedia.Toshiba.EU/landing.aspx

    Good bye

  • Equium A200-1V0 - freezes after plug power supply AC?

    Hi all

    I'm trying to find the solution of the problem:

    My laptop Equium A200 1V0 freezes as soon as I plug the power running. I tried the new battery and new AC adapter after reading some solutions of the internet but so far without success. It works fine without the plug'in ac, but as soon as I join to food it freezes and I have to force the shutdown of the machine which is not good.

    I would be very grateful if someone can give me please the solution in detail the problem mentioned above and also let me know the cause of this disorder as well?

    Thanks for reading this thread and for your efforts.

    Kind regards

    pat3l

    Hey,.

    You use an AC/DC to original Toshiba adapter? In my view the problem must be related to AC/DC adapter or the motherboard itself

    Important is that you use Toshiba parts only to test with an AC/DC to original Toshiba adapter. If it doesn't work, it seems that the motherboard is faulty. These serious physical issues can only be set to an authorized service then you should contact the guy and ask for help. ;)

  • On Equium A200-1V0 unknown BIOS password

    Hello

    I have an Equium A200-1v0 when turned to is ask a password of bios for which I have not so how do I solve this problem.

    markb68

    The BIOS battery has nothing to do with the BIOS password so don t spend your time disassembled. It can happen that do you some damage.
    I put t know how much it costs but if the laptop works well it is a worth paying. This old A200 is not bad machine and works perfectly with Win7 32 bit so that you can use next years without problem.

  • Equium A200-1V0 - need advice for the new series of laptop

    I want to replace my Equium A200-1V0.
    I don't know not in range it originally was - base or more?

    What would be a good replacement for it now?
    What I use my current for internet, email, Word/Excel and simple games. I also use it to listen to the music and the iplayer.
    HD, also used to store photos and iTunes.

    I have a budget of about £300-£400
    Minimum specification of:
    Memory - 2 GB
    HD - 200 GB
    Intel processor - NOT a Celeron - duo or preference i3
    stereo speakers
    at least 2 USB ports
    HDMI port - optional
    Screen 15 ''

    Thanks in advance...

    Hey,.

    There are several laptops Toshiba with 15 screen I think that the important point is the price because other requirements such as 2 GB RAM, 200 GB, etc are no problem. Most laptop have 4GB or more of RAM and also tough with more disk space.
    Moreover the Intel Core i3 processor is standard CPU at the moment, some models have a Core i5

    Take a look at Satellite C650, L650 and L750. These models are to fundamental factors such as Internet, music, videos and simple games.

    You can compare all models on the official page of Toshiba:
    http://EU.computers.Toshiba-Europe.com/innovation/family/

  • Problems with iTunes sync - Equium A200-1v0

    Hello

    wonder if someone could help with this?

    I have trouble to synchronize my Toshiba Equium A200-1v0 with my iphone in itunes.
    The laptop worked well with an ipod for years are, however, have no joy with the iphone.

    Someone suggested that my drivers may need to be updated.
    How can I find the specific drivers needed?
    Anyone else had a similar problem with itunes?

    Thank you

    Why do you want to update the driver for laptop?
    This has nothing to do with the laptop.
    I guess that this is related to the Apple software and I recommend to reinstall this kind of things together.

    I had also some problems with the iTunes software. I put like that, but I need to synchronize the files with my iphone and I had to reinstall it many times to make it work.

Maybe you are looking for

  • Untrusted connection error keeps appearing

    I have tried everything, uninstall/reinstall firefox, clear caches, affecting its default value, by running in safe mode, the configuration of the clock and still nothing. Sites like facebook and google keep getting blocked, and even when I confirmed

  • TE2100: the cursor moves by itself

    Hello again,I have a TE2100 - its about 4.5 years. Its been a good computer but recently I had problems with the cursor moving on the screen itself.It moves in a straight line - sometimes upward, sometimes down, left or right.When I first initialize

  • Place hole problem

    I am trying to place a hole on my circuit board design, but the place-> order hole does not. According to the Ultiboard help manual, a hole should appear above the cursor after pressing 'OK' in the through hole pine Properties dialog box. This is not

  • STOP WZC.

    Hello My computer DELL INSPIRON 1300 WINDOWS XP worked fine and connected to my office, wireless network until recently the settings of the wireless router has been tampered with by mistake, but was later corrected. Given that this is is that I lost

  • Only a part of a query ReadProcessMemory or WriteProcess memory has been completed.

    It happened when unpacking a software download. I deleted the program and downloaded again and got the same error when you try to install. I use WIndows xp service pack 3 with a brand new computer.