Re: Equium A200 - Code 39 on DVD player

Similar Questions

• Equium A200 - won't read DVD / CD more

  Hello any help would be appreciated... I'm not very technical so please keep things simple!

  Laptop: Equium A200-1VO
  Model: PSAF5E
  OS: Windows Vista Home Edition 32-bit

  My laptop won't play is no longer DVD or CD
  Work ok bootable CD but when I insert any other they seem not be recognized the drive. I tried to play original movie DVD and CD on a Toshiba DVD player, multimedia Realplayer and VLC Player. I don't get an error message and I see "DVD RW Drive (d :))' in my 'work'

  I searched other threads and followed the advice given. But nothing has worked, so far, I have:
  -removed upper and lower filters
  -updated audio driver
  -update the BIOS
  -reinstalled realtek High Def Audio Driver

  All advice welcome! Help, please!

  Confused chick

  Hello!

  I agree with Akuma. Normally, it looks like the upper and lower filters. You must then maybe try again and read all the instructions in the Microsoft document.

  I'm pretty sure that it is a software issue because you can boot from the CD and so I doubt that it is a hardware problem.
  Maybe you should try to update Windows and check for yellow exclamation marks Device Manager.

  Good bye

• Satellite A200 - 18 M - HD - DVD player faulty

  Hello

  One of my clients bought a laptop Toshiba Satellite A200 - 18 M. The HD-DVD player, works very well, but now is not ready any CD / dvd, including e Toshiba recovery DVD. The drive has become defective.

  How do I get this repaired / replaced?

  The laptop was purchased in December 2007.

  Thaks a lot for your comments in advance.

  Robert

  Hello, Robert

  All you have to do is to contact the nearest authorized service provider. To find a visit the Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Please, make a call and explain the situation. The guarantee is valid and your customer will again get disk free.

  Good luck!

• Region code of the DVD player

  The DVD on my Pavilion A1375A Media Center PC drive is set to region 1 - I am in Australia (region 4).

  I can't set it to region 4.

  I asked HP to sell me a new DVD player, but they do not know what the new discs region code will be and asked that I contact Microsoft and ask:

  (a) area code would change once a factory of re - configure?

  (b) what would be the new replacement drive region code?

  It seems strange to me that HP can't?

  Hoping someone can help,

  all good wishes,

  David

  Hello

  You must talk to people bad at HP since it is not Windows that
  decides what optical drives of regions are defined.  HP provides probably hundreds
  readers of your region (really the thousands).

  It is by design.

  DVD region information
  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  DVD region code
  http://en.Wikipedia.org/wiki/DVD_region_code

  You can buy devices that claim to be region free and software that claims to
  in order to allow other regions to read even if I have no experience
  with those.

  Region Free DVD Player Information
  http://www.dvdbuyingguide.com/codefreedvd/Codefree-FAQ.html

  Region Free & Code free DVD player information
  http://www.dvdbuyingguide.com/codefreedvd/bigfaq.html

  Forums - a lot of expert real help
  http://Club.myce.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Code 19: Unrecognized DVD player

  My DVD player suddenly stopped working on my laptop, literally from one day to the next. I tried running the kb314060 of Mr. Fixit, but when he tried to reinstall the driver, it failed.

  I don't know exactly what to do now...

  Hello
  
  19 code: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. To resolve this problem, you can first try running a Troubleshooting Wizard. If this does not work, you must uninstall and reinstall the hardware device.
   
  Try the following steps as an administrator and verify the result.
  Step 1: Download and run Microsoft fix it.
  1. visit the website, download and run Microsoft fix it following: http://support.microsoft.com/gp/cd_dvd_drive_problems
  2. once the tool is running, restart the computer and check the functionality of the device.
   
  Step 2: Roll back the driver.
  1. click on start, type devmgmt.msc and press to enter.
  2. expand CD/DVD-ROM drives.
  3. double-click on the sub element.
  4. click on the driver tab.
  5. click on Roll back driver.
  6. click on ok.
  7 restart the computer and check the functionality of the CD/DVD ROM.
   
  Step 3: Restore the computer to an earlier time when it was working fine.
  1. open the system restore by clicking the Start button, all programs, accessories, clicking System Tools, and then click System Restore.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2 choose the right date when the device worked very well and follow the instructions in the wizard to complete the task.
  3. check if the CD/DVD ROM works very well.
   
  For more information about system restore, visit this link: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore
   
  I hope this helps.
  
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Satellite A200-195: what CD/DVD player is compatible?

  Hey guys and girls,

  I had a quick glance and asked Toshiba but no answer given so thought I would ask experts here.
  My DVD-RW in my laptop TS L632D dead and I need a new.

  So what we can buy and adapt without problem.
  These discs are known to have problems with conflict etc... If another player would be better.

  So what you guys and girls indicate they.

  See you soon,.

  Chris

  Hello

  Thank you very much that you see us as an expert :)
  We are all here are users of Toshiba laptops and as you probably don t know this is a user forum. :) so maybe not really ;) experts

  To be honest it s I do not know that this reader of CD/DVD problem.
  Like you probably n t know every CD/DVD drive doesn t takes care of all the s possible CD or DVD from different manufacturers.
  Some CD and DVD is more compatible and some of CD or DVD s are not entirely compatible.

  However, the point is that you need a new CD/DVD drive.
  I checked the manual A200 (can be downloaded from the Toshiba page) and there is a list with some compatible players.
  Check the page for the user 6 and 7

  You can also call the ASP in your country. The guy knows what CD/DVD players are compatible with your laptop!

  Good bye

• Equium A210-17I - broken CD/DVD player

  Well, a few months back, I tried to install the game SPORE. As I put the game in my portable CD player, it makes a terrible noise, which freaked me out and made me remove the game never to install it again.

  Quick transfer to a month or more later, I read about a program called Securom break peoples CD players.
  I had not thought much of it, until I noticed that more and more of my records would not load, stupidly, I just it shrugged off tension and don't think much about it (I use this laptop in my classes so I have time to send it took off for repairs) had a bad experience with my old laptop when he disappeared for 4 months).

  Today however was the last straw, I need to restore my system, he was a bit lazy and I just felt like if it was time to clean up and start again only to find when I insert my restore disk my CD player will just not load, I have it cleaned, done everything nothing starts from it.

  I tried to restart, and then start the CD by pressing C, just a white screen. Nothing loaded, I actually had the disc just to make my laptop to load windows.

  I'm quite annoyed because my year warranty went out last month. I know that CD players are difficult to replace so I'm worried, I can do.

  Do toshiba repairs out of warranty?

  Hello

  Yes, the Toshiba authorized service partner in your country could replace the CD/DVD drive, even if the warranty has expired.
  Of course, you pay for the replacement if the guarantee is not valid

  See you soon

• Equium A100-027: of CD/DVD player says driver is missing or damaged

  My cd/dvd drive is not more indicated in "computer". I looked in Device Manager and there is an exclamation mark next to my drive. I did a complete analysis of norton and everything was clear. Device Manager when I open the properties of this drive, I get an error message.

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  Hello

  Please check http://support.microsoft.com/default.aspx?scid=kb;en-us;320553 and use method 1.

  Using this method, I solved the same problem on my old laptop.

  Bye and good luck!

• Error code 39 on DVD player?

  My dvd drive is not being recognized. Device Manager gives a code 39. When I try to update the driver, I said that I have the latest driver available. Equipped with Vista.

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Equium L40 - 17 M - deleted DVD player

  Hi all

  I have a problem with my computer and I was wondering if someone could help. I think I should have removed a pilot by accident, I use to be able to burn with the cd.rw music but I don't find either this drive use more.

  The only drive that appears now when I go to burn some music is Pioneer dvd - rw dvr-k17a ata device or image recorder. I tried many things to try to fix this, but nothing seems to work, including systen restore and use of disk recoverey product, who just erased all my files!

  I would be very grateful if someone could help in this matter

  Hey Buddy,

  To be honest I don t understand what you mean, because your ad is a little confusing... Have you read this again after the announcement here in the forum?

  I put t know where you checked the readers but Pioneer seems to be the CD/DVD drive so I put t understand where is the problem.

  What program do you use to burn disks and what OS is installed?

• Equium A200 - 1V0 DVD Player error impossible of video output to an external device

  Hello
  I use my Equium A200 1V0 laptop with Vista Home Premium, and whenever I try to watch a DVD using the preinstalled Toshiba DVD Player software, I get the following error...

  "Unable to video output to an external device. Please spend your
  display the buttons on the unit by pressing the Fn + F5 after the end of the application. »

  I do not have an external monitor, and have never had a. (By pressing the Fn + F5 buttons does not work, because...) I have not attached external devices!)
  The software used to work properly, and I have not changed the settings at all.

  I have now tried to reinstall with the latest download from Toshiba, but the problem remains.

  Any thoughts would be accepted with gratitude.

  Bufster

  Hello

  I found a boyfriend of the solution.
  How?

  I searched simply here in the forum and found this thread!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726

  Jack Black has posted a link to a useful Toshiba doc that says that this error is related to the Realteck sound driver.

  Update the audio driver and you must solve this problem!

• Equium A200-1VO - replacement DVD player

  Hello

  I was wondering if someone could help me find a replacement of CD/DVD for a Toshiba Satellite A200-1VO. do I need to export the model exact same DVD player or is there another appropriate drive that works?

  I know how to mount the drive for the installation is not necessary

  Thank you very much

  Nick

  Hello!

  I also replaced my DVD drive on an older Toshiba laptop and I can tell that you need to install a DVD player that is listed in the user manual.
  If you can ensure that the new drive works because the reader has the same pinout.

  If you don t have the user manual, you can download it on the Toshiba site. ;)

  Good bye

• Equium A200 CD/DVD player - 26 d keeps opening by itself

  Starting from my laptop, the dvd player automatically opens and it again whenever I close. Someone else met this, or know how I can stop this?

  Hmm. I m not very good but looks a bit like a hardware problem.
  In my case, the CD/DVD drive is ejected until a procedure of engraving was finished. This is normal behavior

  But in your case the CD/DVD drive does not eject automatically...

• Equium A200 - problems with the CD/DVD-RW and Realtek HD driver

  I'm having some trouble with my Equium A200-1VO.

  First of all, I can't get the CD/DVD-RW to write any dics. The Player opens also from time to time.

  Secondl, I just downloaded and installed the latest driver Realtek HD audio, under the guidance of Toshiba, to see that when I plug my headphones the sound always comes out of my laptop speakers.

  Any help or thoughts?

  Thank you

  Now, he can be really problematic. If you use your own installation of the OS, no one can say with certainty what can be the problem. Each laptop manufacturer, including Toshiba, offer recovery image installation and in using the factory settings, everything should work well. These recovery images are tested and they offer all the hardware and software features.

  Maybe you should install Vista using recovery media supplied and check if all these problems are happening again. If yes then we can talk about the unusual and serious issues.

• Equium A200-1V0: DVD-RAM UJ-850 s does not read data discs

  My laptop seems to have decided to stop reading data disks.
  However, there is no problem with the audio CD, but when I insert a data disc such as the software considers the disk is empty and try to format the drive.
  I searched internet day for solutions and tried without success to the following:

  Removed the UpperFilters and LowerFilters in the registry.
  Uninstalled and reinstalled drivers.
  Bought DriverWhiz (waste of money!)
  Tried to access disc command prompt that generated the message "incorrect function".
  Tried to use the enforcement function and access an exe file that I know is on the disk, but it comes up saying I need to format the drive
  Uninstall service packs
  I even thought it might be something to do with the MagicVirtual drive I had installed so I uninstalled completely which
  I uninstalled real player

  I'm about 3 minutes to destroy my laptop so any help would be appreciated.

  Laptop: Equium A200 - 1V0
  Drive DVD - RW: MAST * a DVD-RAM UJ-850 s ATA
  OS: Windows Vista

  Hello

  Deleting upper and lower filters was the first idea that I'd like to share with you, but it seems that you have already tried this solution proposal

  How about windows boot CD or a linux live CD?
  Is this possible?

  If not then I thing that the question could be linked to the wrong material work I m thinking on the issue of laser lenses eventually the laser lens can not calibrate properly and this could be a problem

  In this case, only a replacement CD/DVD drive can help greet