Re: Equium P300-16 t: Touchpad and State LED lights have turned off

My touchpad and the LEDs are deactivated and I don't see a way to turn them back on.
Does anyone know how? Thanks in advance.

Hello

To be hinest I don't know what you mean exactly with status LED, but maybe your touchpad is disabled. FN + F9 key combination to activate again.

This with LEDS is not understandable. Can you please explain what you mean exactly?

Tags: Toshiba

Similar Questions

  • The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

    The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

    The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

    Start by:

    Reset the PRAM and NVRAM on your Mac.

    MacIntel: Reset of the controller (SMC) system management

    Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

    If you are unable to start;

    Reinstall El Capitan without erasing the drive

    Please make sure that you back up.

    1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
    2. Select disk utility, then click on the continue button.
    3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
    4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
    5. Quit disk utility and re-enter the Utility Menu.
    6. Select Reinstall OS X and click on the continue button.

    Also, see this tip for user: basic steps for the OS X upgrade.

    If this doesn't get you;

    Install Yosemite or El Capitan, from scratch

    Backup if possible before proceeding.

    Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

    Select utility disc in the Menu Utility, then click the continue button.

    When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

    Click Delete in the main window of disk utility. A panel will fall.

    Define the type of Format Mac OS extended (journaled).

    Click on the apply button, then wait for the done button to activate and click on it.

    Quit disk utility and re-enter the Utility Menu.

    Select reinstall OS X and click on the continue button.

  • The browser does not start after you have turned off and turned on the computer

    The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

    Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    Please report back to see if this helped you!

    • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

    Thank you

  • Whenever I have turn off my pc and reboot later, the time and date go to 0.00

    Original title : improve system performance slow slow start

    Whenever I have turn off my pc and reboot later, the time and date go to 0.00

    Probably means the ROM BIOS chip gone bad and must be replaced. Its a small coin like chip located on your motherboard. You should be able to buy one on where one sells computers and electronic products.

    How to replace the BIOS chip on a motherboard . eHow.com

  • Whenever I have turn off my monitor, and then turn it back on, all my desktop icons are completely reorganized.

    This issue just started.  Whenever I have turn off my monitor and then turn it back on, all my desktop icons are completely reorganized.  This happens when my system goes into power saving mode, or whenever I have turn off the monitor.  Even if I turn it back on just 5 seconds later, all of my icons are not where they were previously.  Help!

    Suggestions:

    1 a simple way:
    . Right click on desktop > view > uncheck Auto arrange > check snap to grid.

    2. in a more elaborate way and actually a better way. I use this method I have over 150 shortcuts etc on my desk. I can't afford to have shortcuts/icons, rearranging themselves. I won't be able to find anything, if they do.
    Here is the tutorial:
    http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/

    Note: The method is not perfect, you can, after a while, have one or 2 icons on the spot. But it's easy to fix.

  • I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.  How can I solve the problem and use the software again?

    I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.

    How can I solve the problem and use the software again?

    If you use a perpetual Photoshop and formatted your disc version of starting without disabling your activation of Photoshop, you also Adobe supports help you activate Photoshop once you retrieve your serial number.  The startup disk formatting would destroy that credential of Activation Photoshop machine which is registered in the database of the Adobe activation server. Which reduces the activation numbers you have to use.  If you have Photoshop installed on a second computer that means that you have no free activation available as well, even with your key you can't activated the machine.

  • When I click on Akamai Download Manager says of the window which opens, "413 header length too large."  How can I fix? I am running Windows 8 on a laptop computer and that you have turned off my pop ups.

    When I click on Akamai Download Manager says of the window which opens, "413 header length too large."  How can I fix? I am running Windows 8 on a laptop computer and that you have turned off my pop ups.

    Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  • Equium P300-19O - black screen and does not restart

    My Equium P300-19O had a blue screen of death after a few accidents occurred due to a broken Windows media player which 3 safe resets and then I get a blue screen of death.
    I restart the laptop, but now I have past the toshibia load up, but do not get further rather get a black screen with a dash flashing in the upper left corner.

    Please suggest anything that could help me get the laptop again.

    Hello

    Have you checked if you can boot into safe mode? You can try to start in safe mode if you go into the advanced boot menu by pressing F8 after you have switched on the laptop. Here you can choose.
    Maybe you can also try a system restore to a previous state.

    If it doesn t work it should boot from the recovery disk Toshiba and reinstalling Windows.

  • Equium P300-16 t BSOD and black screen after the removal of GPU

    I have a Toshiba Equium P300-16 t and I was getting 90 c - 95B on realtemp so I bought a thermal paste of isopropol alcohol and yesterday that I changed the thermal past on the CPU and the GPU.

    When I booted up after that there was a long beep that lasted a few seconds and my speakers a few cracking apart from that everything was normal, but then after a few minutes my screen is odd (for example, green artifacts) and then went black.

    After awhile, I started my laptop to the top and the same thing happened with the speakers and a beep but the screen was fine. I opened realtemp and became c 65 - 70 c, then restarted because of an Avast update.

    Now, when I turn on my laptop the screen becomes either black or I get a BSOD 0x0F4. I tried to boot from a USB Win7 and repair, but the rest screen went black, so it is not a HARD drive problem as some sites say (from the BSOD error).

    BSOD is mainly a product of serious software problems or it seems due to a malfunction of the equipment.
    I guess this is NOT question related software since you don't touch software (am I right?). So I think you damaged somewhere during the disassembly of the laptop or the removal of CPU and GPU.

    I have no other way for you to control the affected parties? How?
    I guess you need a help from a technician who would be able to analyze the material for potential problems.

  • MacBook Pro froze access to iCloud tent and now I can not turn off my computer

    I am writing this note on a computer that has locked me out of cold button Poweroff or reboot. My system preferences requested my password, I entered, press "Sign In" and he currently "try to connect" for about 15 minutes now.  I tried clicking Apple-> restart, ctrl + alt + delete and the power button. My computer does not restart, saying that preferences system interrupted stop down. But I can't quit System preferences. My questions are twofold:

    (1) how to turn off my computer and restart it?

    (2) how do I remove this computer iCloud? Or at least prevent it from connect to iCloud? It never worked and it just bugs the heck out of me.

    To force the closing down, hold the power button until the screen goes black. You may well find that the connection attempt is not reappear on a restart; You should if you want to be able to go to system preferences > iCloud and click on disconnect.

  • my personal hotspot will not die. How can I fix it? I have turn off in settings over and over again. I turned off the phone and rebooted. I changed my password hotspot. nothing seems to fix this problem

    my iphone 6 starts to turn itself automatically more and more. restart the phone did not help; change the password did not help; l ' turn off works for only a few seconds, then it turns itself back on. any suggestion would be appreciated. Thank you

    Check here > share your Internet connection with Personal Hotspot - Apple Support

  • Satellite P300-156 PSPC4E - stay white media LEDs on after power off

    Hello

    I have a Toshiba laptop Satellite P series P300 156 (PSPC4E) which has just developed a problem

    When I turned off the laptop stops normally, start button / stop itself turns off, but the white Media 6 LED to the right of the power button remains constantly. The only way to get these themselves to turn off is to disconnect the battery.

    Can someone please advise

    Thank you very much

    Hello

    I'm don't know if this will help, but try to set the BIOS to the default settings or try to disable the LED lighting in the BIOS settings.

    Play around with these settings.

  • my computer screen goes off for a few seconds and the lights without turning off the unit. This has happened several times, regardless of the period in which stays on.

    My computer operating system Mac Pro OS X EL Capitan 10.10.3, ink 13"early 2015 screen off for a few seconds and back on without turning off the unit.

    This has happened several times, regardless of the period in which stays on.

    Don't know what is happening with your publication details.  You posted in space of the Macbook Pro forum & even your profile indicates: ' MacBook Pro (retina, 13-inch, early 2015), OS X Yosemite (10.10.3)..

    Your post indicates you are using a Mac Pro, which is a desktop computer and with the help of El Capitan who is 10.11.2 not 10.10.3 which is Yosemite - 'my computer operating system Mac Pro OS X EL Capitan 10.10.3.

  • Whenever I have turn off my laptop and turn it back on, all my data disappears.

    I'm using a thinkpad notebook issued by school (lenovo R400) that uses Windows Vista.  I know almost nothing about computers, but a couple of my friends know a little, and none of them were able to help me.  Every time (it happened three times) I turned off my laptop in the last three months or so, I turn it back on and everything disappeared.  I downloaded programs, backgrounds, music, documents, photos, videos - all of this.  Now, I checked the recycling bin, so I know that it has not been deleted.  Also, if I check what has changed recently, I can recover some of them.  I usually just let my laptop to sleep, so I turn rarely completely off.  The first time it happened, there were just two Documents folders, two folders of music, etc.  The next time it happened, they disappeared, but they have either finally came on their own after a few days, or me just messing them back.  As I am currently in College, it is very important that I can access everything I could have written this year.  It is a big problem for me, so any help would be greatly appreciated.

    You are constantly thrown into a temporary user account. This can be caused by hardware or malware infection problems. The most sensible thing to do is to take the machine to your school IT Department. and let them take a look. MS - MVP - Elephant Boy computers - don't panic!

  • I get a message telling me go download 1 update and do not unplug or turn off the computer.

    I get a message not to unplug or turn off the computer until 1 update is complete.  After 3 hours, the same message appears and nothing has been updated.  WHA'ts the problem?  Thanks-John

    Please provide more information for your issue to be diagnosed.

    Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

    Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

    Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

    To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

    For assistance OneDrive see paragraph 9.3:

    http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

Maybe you are looking for