Re: Erratic pointer and the excessive fan on Satellite 1130

Similar Questions

• I looked under system restore points and the earlier it had was on March 27, which was still after that I got problems

  Good so my computer has some corrupted files... I looked under the system (Yes, including the section 5 days ago) restore points, and the earlier it had was on March 27, which was still after that I got problems... I want a later date... Help, please.

  Hello

  If there is no previous restore points until 27 March, including even more that 5 days more then they just do not exist

  and you can not do something which

  Follow these steps instead:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Moving anchor points and the whole shape gets distorted to change the line weight

  I have a fairly simple drawing that I drew in a larger size, so I could be more specific with it, and now I want to reduce up to the finished size and thicken the line, but when I make the line thicker, my anchor points are moving and the whole drawing is distorted.

  Using Adobe Illustrator of 24 years, I never saw that happen. When I click on the "up" arrow in the stroke palette a lot of time to gradually increase the thickness of line, I can watch made anchor 'walk' around like my shape gets distorted.

  If I go to the place a numeric value for the thickness of line, it doesn't.

  However, if I use the scale tool to shrink the design down to the size of 10% or 20%, or whatever, with traits of the scale and effects UNCHECKED, yet once, move the anchor points and the drawing is distorted.

  It's all about a brand new installation of Illustrator CS 6 for Mac (although I use CS 6 for about 2 years now, my hardrive crashed this past weekend and I had to reinstall everything).

  I missed a little box somewhere that I never saw elsewhere that is what actually happen?

  This post editing to add:

  Also, some of these objects in my drawing I cannot change the race less than 1 point thickness. If I choisis.5 ou.25 pt in the context menu, or even if I enter the numeric value, it jumps to 1 point. Other objects in the drawing are not.

  These objects in question are "rounded rectangle" forms I used the scissors tools to cut and then used the "join" command to put them as well as other forms that have been "scissored"as well."

  All forms of "Ellipse" and "Rounded Rectangle" that I have left intact do not exhibit this problem with stroke and distortion.

  You are being bitten by the Align-to - pixel grid. Select the entire document and go to the transformation Panel and turn off snap to Pixel - grid at the bottom of the Panel. Then go into the rollout (small triangle in the upper-right) and disable align objects on the pixel grid.

• Can I change the CPU and the GPU on my Satellite L500-210?

  Can I change the CPU and the GPU on my Satellite L500-210? If so, what is compatible?

  Memory DDR3 2 x 2024 (4096 MB)
  Chipset GM45
  BIOS 2.10 05/06/2010
  Socket P (478 pin FC - PGA microphone)
  currently INTEL DUAL - CORE T4500 2x2.3 GHz x 64
  GPU: Ati Radeon HD 4500 series 512 MB

  I can put a CORE 2 QUAD for example 9000 / 9100 / 9200?

  Before starting to discuss this review, please http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm at first.

• Re: Tecra M11 sudennly freezes and the cooling fan starts to run

  My Tecra M11 laptop is running Windows7 and with a broadband dongle Telstra wireless internet lights up and works normally for a period of time.

  Sudennly it freezes completely and 5 seconds later the cooling fan starts to run until I power off using the power button.
  Clues?
  Thank you

  You must understand that on this virtual path, it is not easy to say what the problem is here.
  I can imagine that some background process starts and increase the use of the CPU at the critical level when the motherboard sensors register at higher temperature of the processor and cooling fan starts to run fast enough.

  Try to check in the Task Manager, if something like that happen.

  I put t know how you have configured your operating system and to applications that run in the background, but also to try to stop treatments that you don't need and change some settings.

• iTunes can't locate my music. When I try to play a song one get an exclamation point and the message "the song could not be used because the original file cannot be found. You want to locate?

  I don't know if I am posting this in the right place. If she must be somewhere else please let me know.

  When I try to play a song I get an exclamation point next to the song and a pop up that says: "the song could not be used because the original file cannot be found. You want to locate? »

  I use Windows 10 and iTunes version 12.3.1.

  It's the path statement where the music is currently located on my hard drive:

  

  If I click on a single song from within File Explorer, it opens iTunes and the song plays without problem.

  To try to solve this problem, I went in 'Advanced' in 'Préférences' and changed the iTunes media folder location to match the location of the files on my disk hard as you can see below.

  

  Unfortunately, it did not work either. iTunes is always gives me the same message that it cannot locate the original files. I REALLY hope someone can help me finally tried for weeks to solve this problem.

  Thank you!

  Now iCloud is down, if something happens on the end of apples.

• How can I see the security network key / password for my wireless network (all I see is points and the characters of the show option does not work)

  I'm trying to find out what is the password for my internet connection.  I can see the properties of the network and the password appears as a series of points.  the "Show characters" checkbox does not work... is there anyway I can find what is the password?

  Hello

  If you don't remember the password registered for you wireless, you can always reset your router to the factory default settings.
  Unfortunately, we cannot help you recover files and features that are lost or forgotten passwords.
  For more information about the lost passwords, please see the following Knowledge Base Article:
  http://support.Microsoft.com/kb/189126

• How to change the pointer and the sensitivity of the mouse

  original title: pointer and mouse sensitivity

  I have a new laptop and when drag my pointer over a link it it automatically opens wether I want what it or not.  I can't find how to change it.  I have a toshiba satellite L555-S7001.  Any help would be greatly appreciated.  Thank you Paul

  I have a new laptop and when drag my pointer over a link it it automatically opens wether I want what it or not.  I can't find how to change it.  I have a toshiba satellite L555-S7001.  Any help would be greatly appreciated.  Thank you Paul

  Hello

  Check the options for the Touchpad in Control Panel. It may be named "Synaptics" according to the manufacturer. If you can't find the settings, see the manual that came with the computer.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• The quarters between a bullet point and the text really

  I'm sure I've done this before, but can't remember how. I have a list of bullete (ul) and would like to leave a wider space between the chip and the beginning of the text. I tried to play with the padding and margins, but which moves the text and bullet point.
  I guess that things thinking it can be done...?
  Andy

  Good read through:
  http://alistapart.com/articles/taminglists/

  --
  Concerning

  John Waller

• Noise of the cooler fan on Satellite A110

  My laptop Satellite A110 was a cooler fan noise. Then their where the different speeds of the cooler and after 2 minutes the cooler was standing. After the reboot, the problem was absent.

  Them anywhere is a person who has the same problem? The laptop is 1 year old and I have the additional guarantee.

  What do you mean exactly by portable was a cooler fan noise?
  Do you mean the common noise that comes from the cooling module while the fan is running?

  In my opinion is nothing unusual. The speed of rotation of the fan depends on the temperature and the additional parameters in the economy of energy, for example.
  If your computer is overheating laptop doesn t (automatically closed unexpected downs) then the cooling module works correctly and you shouldn't t worry ;)

  Best regards

• 5205 - update of the BIOS and the system locked up satellite

  I have a Toshiba Satellite 5205, I updated the BIOS to 1.5 (I think it was.)

  And the laptop locked up it seemed all in the bios flashing. The reason why I say shut up
  is because windows never stop after the flash and windows was totally locked up.

  Now when I turn on the laptop, I get no image on the LCD at all. And the remote control downwards at the front said "technician / bios call. I know that if the battery go dead bios will reset (like a desktop computer.)

  But another problem is, can't get off the case to get at the battery, so he'll recover.
  I never had too many problems with laptops, I can fix/repair computers office without problem.

  I was wondering, bios clear/reset if I take the battery pack on the back of the computer laptop itself?
  Don't know if it will have the same effect as the removal of the (watch battery inside like a normal desktop computer.)

  I had a problem with my pad endangered and hang retouching who enter or exit Windows. It's
  why I decided to update.

  Because I don't get a picture now, I can't re-flashing the bios.

  Any advice on that would be great.

  Hello James

  If you remove the CMOS battery, it will have no influence. The BIOS is written in the BIOS chip and cannot be given to previous version before upgrading. The problem is that you have a United States model and I have no experience with the Toshiba U.S. models.

  If you want to see the page we Toshiba under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

  Maybe you can find something interesting there. In any case, from your description, I assume that the BIOS is faulty and you need technical assistance. Call them and ask what exactly the error message. Please give us a feedback on this problem. It may be useful for other users we Toshiba.

  Bye and good luck!

• Can I upgrade the memory and the graphics card on Satellite A60

  Hi all..
  I have a satellite a60 652.
  I want to improve it with new ram and graficcard.
  can I use more than 1, 5 GB of ram? later with an update of the bios?
  and if I can change the graficcard? If the answer is Yes... What is the best card I can actually use?
  or is there a map which is almost a geforce 7600 or 6600 (or ati 9700) I can use?

  Thank you for the help
  Ingo

  PS excuse my English ;)

  > I want to upgrade the ram and the new graphics card

  Upgrading RAM is possible but the graphics card is unable to be updated!

  If you want to upgrade the memory you could update to 1536 MB max.
  The A60 supports 512MB internal memory and it is so that one memory slot where the extra RAM module can be inserted.

  These modules are compatible:
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Concerning

• Satellite M100 with Debian - how to control the power and the cooling fan on

  Hey,.

  I M100 and I installed debian, works very well, but there is a problem.
  Cooling fan turns on the top speed of all time. I m not shy on unix.
  How can I control cooling fan?
  How to control the power to the laptop?

  Hi mate,

  have you ever heard of the toshutils? I highly recommend trying these tools. Just google for toshutils and you'll find a few nice applications. Should usually be included in the distribution you have, also, I would check with 'apt - get search toshutils.

  See you soon

• Number of points and the number of plots for table and graph

  Hi guys,.

  Can someone explain to me why I get when I run the number Vi 1 2 plots for each table and graph with 6 points, but when I run vi 2 I get 4 locations with 1 point each run assuming that the same logic applies to two screws

  Thank you.

  When wiring of the paintings in the graphics, it is assumed that each line are several points of land.

  You must convert the 2D table or right-click on the graphic and select "convert table.

• Windows will not work stopped... it crashes with just a mouse pointer and the blue screen.

  Windows will not be stopped.  Laptop crashes with blue screen and a mouse pointer.  This laptop has XP Professional SP3.

  Look in the event log to see if any errors are recorded.  Install the Service Profile Hive Cleanup (UPHClean) Microsoft and see if things improve.  See here for more information:

  You experience disconnection problems on a computer based on Windows XP, Windows Server 2003 - based, Windows 2000 or Windows NT 4.0-based:

  http://support.Microsoft.com/kb/837115

  John