Re: Error Dynadock specific program

Similar Questions

• Error in Windows XP by day make saying "RUNDLL error loading C\:Program Files\Fichiers Files\ParetoLogic\UUS2\UUS.dll"

  At 18:00 every day, I receive an error message that says: RUNDLL error loading C\:Program Files\Common Files\ParetoLogic\UUS2\UUS.dll the specific module could not be found.  I use Windows XP.  What is this and how can I solve this problem?  It does not seem to affect what anyone, I don't know, but I know it shouldn't be the case and would like to fix.

  I think they already know about this issue (and how to fix it) to ParetoLogic:

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/

• Error: 126 specific module could not be loaded

  Hello, I tried to install the engineering program and when I click on the shortcut for the program to run the program I got an error. Error: 126 specific module could not be loaded. It cannot load the dll file. How to fix?

  Hello
   
  1. have you followed the steps that I mentioned earlier?
  2. What have been the results?
  3. This only happens with this application?

   
  Method 1:
  
  I also suggest you to install the application from an elevated command prompt. do so right-click on the configuration file and click on "run as administrator" and then check if the problem persists.
   
  Method 2:
   
  I also suggest you run the application in a clean boot state, and check if the problem persists. Clean boot to avoid software conflicts.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  

  http://support.Microsoft.com/kb/929135

  
  Note: do not forget to return the computer to normal after completing the troubleshooting by following the steps described in step 7.

• Event ID: 7024 with error message: "the Windows Firewall service stopped with the error service specific data are invalid.

  Original title: cannot start Service Windows Firewall: Error Code 13

  Hello.

  Anyway, the Action Center has begun randomly telling me that the Windows Firewall is disabled. When I try to start or return to the default settings, it tells me that it is not able to do.

  I went to Services and Windows Firewall is set to automatic, but it is not started. I try to start it and it tells me that it is not able to do the same. The error code is 13.

  I am an administrator.

  MalwareBytes did find and delete a virus named "Disable.SecurityCenter", but after removing that I am still unable to start the Service.

  Can someone help with this problem?

  Edit: The journal ID is 7024 and description:

  "The Windows Firewall service stopped with the error service specific data are not valid... '. ».

  Hello, Connor

  You can try to perform a system restore to before that the problem started. For instructions on how to proceed, see the following ink: System Restore: frequently asked questions

  You can also try running a SFC scan to check (and repair) system corrupt/modified files. To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt, type the following command and press ENTER: SFC/scannow

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion Notebook-15-p108tx: problem connecting with specific programs

  Hi, I had problems connecting with specific programs recently. I'm still able to communicate online through web browsers. Mozilla Firefox works fine, but Google Chrome still has some problems loading of specific pages or they don't load at all. The main programs I am having difficulties with are mainly games platform programs like Steam, Battle.net, and League of Legends, and I'm unable to go online or to connect to their servers.

  I never had no problem connecting like these last two years that I've owned my laptop, until recently. I think it was the 6th or 7th of may these problems started.

  I updated my drivers and was constantly check to download the most recent. I don't know if it's my internet provider, but I was also constantly check the State of the network to ensure that the services are very good.

  If anyone else has this problem and if there are any suggestions that you think could help solve this problem, it would be appreciated.

  Thank you

  Jasper

  Hi Jasper,.

  Thank you for the update. I think that your computer have a rootkit infection. Most of them were inside of the Chrome Extensions.

  Here's what you need to do.

  Open chrome

  Click on the Menu bar in the upper right

  Click more tools

  Click Extensions

  Please search for suspicious extensions that does not belong to the computer, especially ads. Once you identified, simply click the trash can icon then Chrome close then reopen it again to see if you can connect to your desired game. If this isn't the case, then proceed as follows.

  Manual removal of suspicious files (if you are uncomfortable with it. If this is not the case, then run System Restore from safe mode with command prompt)

  Manual removal (I miss the old days of MS virus removal )

  Go to RUN type %temp% , and then delete all folders by pressing SHIFT + DELETE

  Go to Control Panel and then locate all the apps that you think a form of ads

  Go to safe mode with network. Run Malwarebytes in that State

  Then run Tweaking tool to fix everything that has changed since your computer

  http://www.Tweaking.com/files/setups/Tweaking.com_windows_repair_aio_setup.exe

  If your not comfortable with the troubleshooting steps may perform the system restore on the day, it was working fine.

• Error while unpacking program, Code2, please communicate with the author - error message occurs whenever I open my computer

  Whenever I open my computer, I received a message that says 'Error when unpacking program, Code 2, please contact the author'.  It slows me down using my computer and I really have no idea what it is.  I did research in the internet which causes some possible for this error message and I think it's regarding my Windows Update I must have clicked on last week.  Help, please! I really want this message to go.

  Thank you.

  Hi KrystleRivera,

  ·         Did you the latest changes on the computer before this problem?

  ·         When the question began?

  ·         What version of the operating system is installed on the computer?

  I suggest you follow these methods.

  Method 1:  Start the computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Method 2: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference: http://windows.microsoft.com/en-us/windows7/Optimize-Windows-7-for-better-performance

• Error loading c:\program files\arcadeweb\arcadeweb32.dll at startup

  Original title: error loading c:\program files\arcadeweb\arcadeweb32.dll

  I get the error message (error loading c:\program files\arcadeweb\arcadeweb32.dll) I click ok and it goes away, but returns the next time I bring my computer.  Place UN til yesterday, I received the message for rundll.  What should I do?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Step 1: If you have ArcadeWeb program installed on the computer, and then reinstall that program and check.

  Step 2: Alternatively, you can try to perform the clean boot on the computer to resolve this problem.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• Error message "a program could not start. Please try again"when I try to send Remote Assistance invitation.

  original title: Remote Assistance does not work

  Win XP PRO SP3

  Question #1:

  When you try to send an invitation to support remote I get an error message "a program could not start. Please try again. »

  This error pops up before even the invitation is created, so the problem is with the creation of the invitation and not with problems of subsequent connection between the computers. The invitation is never created. This happens on several computers I own or maintain.

  The event log records all errors when this happens.

  I searched for hours all over the Internet and a lot of people seem to have this problem. Some it is resolved, for the most part, they needed to start a service, but the cause of their problem is not the same as mine.

  After restarting the computer, sometimes the invitation creation works fine.

  Other DIY suggests when the problem appears it can be corrected by running the command 'sessmgr-service' in a command line window. After executing this line it seems that the problem is resolved.

  What I find disconcerting is that Sessmgr.exe is the service Remote Desktop Help Session Manager that was already running, but for some unknown reason runs this line made work again right. I'll have to experiment more.

  Is it possible to debug and fix this?

  Question #2:

  When I can finally send an invitation it will work on the local network but not on the Internet. I can't connect to the Internet.

  I'm looking at the structure and the content of the invitation to http://msdn.microsoft.com/en-us/library/cc240167(v=prot.10).aspx
  In the example given here, as in the generated invitations in my experiences, the invitation contains only the LAN IP addresses (with port number) but no global address.
  RCTICKET =... 192.168.1.65:3389; Jeff: 3389

  How the computer expert is supposed to understand the global address to which it should connect is a mystery to me.

  How can I get Remote Assistance to work on the Internet?

  Hello

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• My Cookie file was corrupted in data and my programs continually pop up with the 'corrupt file' error when a program opens, pointing to \Users\name\Appdata\Roaming\Microsoft\Windows\Cookies.

  My Cookie file was corrupted in data and my programs continually pop up with the 'corrupt file' error when a program opens, pointing to \Users\name\Appdata\Roaming\Microsoft\Windows\Cookies.

  The problem is, Chkdsk will not fix this, and I can't access the file. This opens up a world of problems when I need to fix this error, so I can upgrade to Windows 7. Help, please!

  I just ran the scan again. He said of the errors found, but could not be repaired.

  This problem actually has nothing to do with internet explorer. It's the cookies folder that is corrupt in the Windows folder in roaming. The error file is in conjunction with the programs, that I try to run (AIM, Skype, so forth). Trying to enter the folder it says it's corrupt. I don't know what is the root of the problems or how to solve this problem, but these measures have not helped so far. Regarding the repair, I will try that next.

  http://Tinypic.com/view.php?pic=14mw4ly&s=4

  Here is a picture. This is the error of the lower right

  It's what the tool SFC to see system files corrupted and try to repair the system files.
  SFC could not fix it.

  Looks like you will need to do this:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Read the info on the link above.

  Good luck with it.

  Let us know how you go with it.

  See you soon.

  Mick Murphy - Microsoft partner

• "Error while unpacking program, code 2" Please report to the author"Dragon 11 naturally speaking

  What does the error code "error while unpacking program, code 2" Please report to the author"means.  I started getting this error message yesterday, and there is some software that I can't receive now.

  Thank you!

  OK, here goes... my understanding is that you remove the update of microsoft KB2533623

  To remove this update of Windows KB2533623, follow the steps below:

  1. Click on "start > Control Panel > programs and features.
  2. Click on the link "View installed updates" on the left side of the window.
  3. Locate the update ' update for Windows Vista for x 64-based systems (KB2533623).
  4. Select the KB2533623 update and then click on the "Uninstall" button
  5. Once the update has been removed, restart the computer.

  It worked for me, BUT the charge is upgraded every time I restart so do not forget to turn off the automatic updates OR delete KB2533623 every time.

• How to make a type of file (.doc) always open in a specific program?

  original title: How do a (.doc) file type always open in a specific program (my newly installed Word 2010)?

  I use MS Vista and you have recently installed MS Office 2010 to replace my original MS Office 2003.  I want to affect Word 2010 for the program by default to use whenever I double-click a .doc (as opposed to .docx) file, attached or in a directory listing.  But I am unable to do it using the normal control panel installation because I don't know the name of the executable file MS Word 2010.  Please advise me how I solve this problem.

  If its just .doc file then:

  1. click on Start-> default programs.

  2. click on associate a type of file or Protocol with a program.

  3. Locate the .doc from the list of the types of files and left click to select.

  4. click on the line of change program and follow the instructions by selecting the word in an appropriate place.

  For more information, please visit:

  http://windows.microsoft.com/en-US/windows-vista/Change-which-programs-Windows-uses-by-default .

  P.S. for future reference the executable file of Word is called winword.exe

• popup message each startup (boot) - error while unpacking program, code 2.

  I have two messages popup one after the other, after each startup (boot)... it appeared after by mistake, you tap install updates day & shutdown, at first men... Please bear in mine, I have not upgraded to SP2 now have SP1... I think the required updates SP2... sometimes to invite me to install SP2, but refused.

  VISTA Ultimate 64-BIT

  1 MESSAGE POPUP
  "Error while unpacking program, code 2" Please report to author. »

  2ND MESSAGE POPUP AFTER CLOSE FIRST POPUP
  "An error occurred when loading library commonforms.dll::RegisterWindow

  It may have been removed. Please reinstall the Application. If the problem persists contact technical support. »

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, then check if that helps you.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Run the Microsoft Safety Scanner and check if there are any threats found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: If no threat found check if the file is necessary or not, then delete it.

  Also make sure that the popup is secure and then install if necessary. Windows updates are all secure and this is only the computer and Windows manufacturer. Optional updates are the manufacturer of the computer and the manufacturer of the application that you have installed. Important updates are Microsoft and it must be installed. I also suggest you try to install Service pack 2 on your computer and check if that helps.

  Learn how to install Windows Vista Service Pack 2 (SP2):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Hope the information is useful.

• I get this error "error while unpacking program, Code 2. Contact the author' when playing downloaded games

  I get this error 'ERROR WHILE UNPACKING PROGRAM, CODE2, PLEASE CONTACT the AUTHOR' whenever I try to play a PC download game, either from MSN or from Big Fish Games. I ran Spybot, Ad Ware, Malaware and a registry cleaner but the same error. What is going on?

  Hello

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If this does not help, then try to do a system restore to the previous point and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It will be useful.

• How can I get Vista to stop request permission to run a specific program?

  The specific program is "iomega quikProtect" - this is the backup software so I want my children to be able to run it without giving them an admin password.

  The specific program is "iomega quikProtect" - this is the backup software so I want my children to be able to run it without giving them an admin password.

  You can disable UAC, user account control. It is not recommended, a lot of people who do anyway.
  Start > Control Panel > Classic view > user accounts > turn user account control on or off > decide what option you want. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• __lost my photo of microsoft program when I tried to download the upgrade essentials - error loading C\program can windows live \photo gallery\WLXphoto Gallery\WLXPhotoViewer.dll

  Original title: __lost my microsoft photo program when I tried to download the upgrade to essentials

  I tried to download the new update essentials download and three quarters of the way through, he stopped.
  The download was already about this. He said then; "put everything back as it was" when he did. I have
  lost my photo program. It now gives you a nag screen which keeps comeing like:

  Error loading C\program can windows live \photo gallery\WLXphoto Gallery\
  WLXPhotoViewer.dll
                            
  The system cannot find message for message number 0 X %1 in the message file

  0 x %2

  In addition, whenever I boot, the screen shows: "ready to download microsoft essentials" restoration is not
  the ride.

  After starting, the system leaves me alone until I try to open a j - peg or some file im trying to open.
  then the cycle starts again. further investigation, saying that I lost a dll.

  I tried to find microsoft photo viewer download to try to repair the photo of microsoft program and concluded that the
  only way I can do that is by downloading the essential upgrade download because it is attached to it.
  In order to accept the upgrade, the photo program should probably be repaired, as a thought as microsoft solve this Center says there is no problem. all other articles on the net is also not related or doesnot show how to fix the missing dll if it is the problem.

  Hello captain_crunch0,

  In addition to the steps proposed by Ajay, you could try and download and reinstall all Windows Live Photo Gallery 2011.
  This link should be just for the photo gallery. http://explore.live.com/Windows-Live-Photo-Gallery?OS=other

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think