Re: How to access the Windows Recovery Console?

How can I access the Windows Recovery Console. The State of KBs Microsoft it may be accessessed to start with the DVD of the OS. However, you provide OS DVD only Toshiba recovery disks. When I boot them it gives only the option to erase all data and restore the original state.

I have a Toshiba Qosmio F10 running Windows 7 32 bit.

The reason why I need the recovery console is due to a breakdown of chkdsk which results now it running whenever I start up and hanging each time. Other Articals MS say I can get out of this infinite loop by using the Windows Recovery Console.

> I have a Toshiba Qosmio F10 Windows 7 32 bit.
Are you sure you have Qosmio F10?

Tags: Toshiba

Similar Questions

  • Can someone point out code examples on how to access the windows registry?

    I'm new to the Acrobat SDK/Visual C++ and would like to know how to access the windows registry to view the identity of the current user of the reader.

    I know it's at the following registry location:

    HKEY_CURRENT_USER\Software\Adobe\Adobe Reader\9.0\Identity

    I don't know how to access programmatically by using Visual C++.

    Thank you

    Gregory

    There is nothing special a plugin regarding the registry - standard OS calls work fine.

  • Cannot access the System Recovery Console invalid password

    System Recovery Console insists that I use a "invalid password". I installed Win7. I make a written record of all used passwords so I'm sure I know the password I put in the first place; It is a simple word, that I always use for low security situations.  However, I tried all variants of logics of this password (upper and lower case, etc.), but nothing works.  I loaded 'ophcrack LiveCD' and found that the password is .  I tried to use no password and this also fails.

    What can I do to pass in addition to "invalid password" so I can't enter the System Recovery Console?

    Thank you.

    Hey Ron,.

    I finally got some time to focus on this and learned something that could explain the difficulties you encounter!

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

    It seems that the Recovery Console has been taken from Windows Vista (and 7). Personally I did not know this, but then again I don't use it every day! :) So in short, it is not designed to work with Windows 7, and this issue is the result of this.

    Sorry it took me so long to find! I hope that answers your question!

    Cody C
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Having difficulty to remove the Windows Recovery Console

    I followed the instructions on how to do it, but the cmdcons folder could not be deleted. Some files are in use? I installed the recovery yesterday with "Combo Fix" console after having a suspected virus. I wish to remove the console now but could not get the deleted file.

    I followed the instructions on how to do it, but the cmdcons folder could not be deleted. Some files are in use? I installed the recovery yesterday with "Combo Fix" console after having a suspected virus. I wish to remove the console now but could not get the deleted file.

    I recommend that you do not delete it. Recovery Console can be very helpful in situations where you have errors in the file. It works essentially as a back-up allows to replace the files and fix some errors. You can change the amount of time boot options at startup, which speeds up the overall starting your computer. I have mine at 5 seconds. I know what I want to do before I turn on the computer and therefore do not need the options for the default value of 30 seconds.

    I know there are a lot of forums tech that allows you to install Combo instruct. Personally I would never put that on my computer. I've seen too many problems to evolve from it in the past.

    Kind regards

    Joel

    Sometimes to decide what battles to fight the toughest battle of all... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

  • How to access the ESX service console

    Hi all.

    I'm a TV engineer trying to solve a problem of network with our equipment. I'm not a network engineer.

    I'm trying to follow the VMWareKB: "Troubleshooting connection problems network using the Protocol ARP (Address Resolution)" I'm just trying to check the ARP table exists on our ESX Server and has some entries.

    KB said running 'arp - a' for a list of the ARP table.

    To do this, I need to open a service console. I have now read articles 3 or 4 on the use of the Service Console but I am still unable to open it to run the command. I do not understand what I am doing wrong, I am incredibly stupid or miss me something completely.

    An article said, press 'Alt F1"exactly where I am doing this? A virtual machine is connected to the ESX? An article said "to VIM summary screen' I tried logging on the virtual machine and point a web browser on the server, I get a screen of welcome of ESX with link"Connecting to Web Access", when I click on it I get"Internet Explorer Can t Open The Web page.

    I had a look at VIM, I can see the details of the Vswitch network on the configuration page, including the IP address of the console service. Can't see how to open a service console. VIM of pointing at the address for service console is unable to do anything.

    I just need to know how to open the Service console and check the tables of ARP based on the KB.

    Please dumb down of your responses to me!

    The fundamental problem is about some units of electric distribution that we use to power the equipment in the racks. They have a network connection which we track using Virtual Machines to the report of a third person of monitoring and control software. The virtual machines are running alarm software driver used to report to the third party. The virtual machine is on a blade server.

    We have a problem where a unit of the IML has been replaced but configured with incorrect default gateway address. In the hours to do so, the monitoring and control software lost connection to ILM and one by one, all units of the IML began to send the ARP requests - "who has 10.172.248.254'.

    Finally, the MDU constantly send ARP requests and the MDU have lost connectivity to the virtual computer. If we open the VM machine, follow up and a MUD, the ping command ping fails, if we put a laptop in place an ILM and ping the machine VM, the ping works fine.

    If power us off/on the ILM voltage they are good, but we are a 24/7 operation and power cycling the MDU is considered risky.

    We have had this problem before and the only solution was to rebuild the virtual machine and assign all MDU to a new network address.

    All switches ILM is connected (foundry Falstron GS) have been verified by the support of our network guys and we are told are all good. The blade server hosts about 20 VM and they work just fine from other systems SNMP traffic monitoring.

    If anyone has any ideas I'm all ears.

    Hello

    As stated, the console is the administration interface that you can use directly on the hardware. It is not a VM (as such) that connect you with the standard management GUI. You can SSH in the network or you can be "physically connected" as you say (I would use HP SIM or the ILO to connect directly to the blade). Once you have that screen upward, press 'Alt + F1' and you connect. Then you should be able to follow the KB to check the ARP table.

    See you soon,.

  • Message in the Windows Recovery Console

    When I get on the C driveI fixmbr will get the message "computer seems to have a MBR atypical or invalid.»
    Fix MBR can damage your partition tables if you proceed. This could cause all partitions on the current hard disk to become inaccessible. I ran fixboot, but this message persists with fixmbr. I had a nasty malware attack and analyses and fixboot seemed to help but this still happens. Is there a danger here? PC does not start correctly. Under XP Home HP desktop computer.

    Hi Walter Hardison,.
     
    -The fixmbr command works correctly?
     
    The fixmbr command causes this error message to display on your computer every time that you run the command, regardless of the State of the Master Boot Record (MBR).

    After running the command fixmbr , your computer displays or not the command worked properly. If the command was successful, your computer displays the following message:

     
    New to writing on the physical disk's master boot record
    \Device\Harddisk0\Partition0.
    The new master boot record has been written successfully.
     
    If you receive this message, you can ignore the error message you mentioned.
  • How to access the "Bios" in Vista to change "boot sequence.

    Every time I have to install a new program on Vista, the system won't re - start without the Vista installation disc. I need to know how to enter the "bios" to change the boot sequence. Thank you

    Hello

    / Configuration settings (BIOS/CMOS) often F2 start you so look at the screen - boot order should be set to
    Hard drive 1 for normal operation.

    Sound like you may need to run the repair of booting from the Vista disc.

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try Options recovery or a disk of Vista startup repair.

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Also from the command PROMPT on the Console (if possible) recovery or a Vista disk

    SFC/scannow
    Press enter

    and after that runs away

    Chkdsk /f /r
    Press enter

    (Spaces between C and / k and / and f and /)

    Retry (if necessary) after Chkdsk startup repair.

    I hope this helps.

    Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

  • Re: Satellite Pro L450D - 12 X - how to access the recovery partition?

    Hello

    I've formatted Windows 7 with a Windows XP CD but did not setup. I wanted to know how to access the recovery partition to set it by default, everything exists on the laptop right now is Ubuntu, but I don't know, I saw an additional partition that must contain recovery files as laptop did not come with a recovery disk and unfortunately did not create a filter.

    How can I access the recovery partition on the laptop having in mind, I formatted the drive Windows 7 was installed on or should I activate or something like that?

    Any help much appreciated

    Hey,.

    On the second partition of your laptop (data partition), you will find a folder named HDDrecovery and it contains recovery files. The problem is that you can use the HARD drive only with the pre-installed operating system recovery feature. It would mean in your case it s too late now and it s not in use anymore.

    You have created the Toshiba recovery disc as mentioned in the user manual? If Yes, you can use this disk to restore to factory settings. Just boot from this CD and follow the instructions on the screen.

    If you don t have the recovery disc, you can order it here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Cannot access the Oblivion cheat console, but I stopped the windows media center Receiver service.

    Hey, I tried to set up the console cheats for oblivion, but it does not work I followed the steps on how to stop the windows media center Receiver service, but even after that I stopped it it won't let me put up the cheat console. no idea what I should try next. ?

    Hi daking9002,

    To bring up the cheat console into oblivion, you will need to unplug the sensor remotely from the PC. Once it has been disconnected, the oblivion cheat console will come just as it would on any other PC.

    I also tried equipping my number 1 access key. It works very well now, I just press 1 and the console opens. To close simply press ESC twice and press 1 once the UN-equip the ring.

    You can also download: " http://www.tesnexus.com/downloads/file.php?id=13133 ."

    -It gives you an inventory item: "Ring of Console" problem solved. -

    QUESTMSG

  • How do I start the Windows recovery environment (WinRE)?

    Hello

    I have PLUA1E Satellite Pro U200 - 02802QS with Vista Business 32 - bit and the WinRE partition.
    How do I start the Windows recovery environment (WinRE)?
    I mean what key should I press during the boot process for Windows re menu?

    In my Satellite Pro A300, the F8 key during startup will run the recovery of HARD drive partition.

    Hope it's the same on your.

    Or do you possibly mean the recovery of Vista Business environment. Accessible through the Control Panel, system image recovery?

    / Torbjörn

    Post edited by: ssstsg

  • How to restore the windows/system32/rundll32.exe to my computer to be able to access Add / Remove programs in the control panel

    Original title: rundll

    How to restore the windows/system32/rundll32.exe to my computer in order to access the ad / remove programs in Control Panel

    Hello

    -You have the CD ROM Windows XP disc?

    I suggest you to follow the steps in this article to resolve the problem.
    http://support.Microsoft.com/kb/812340

  • After the downsizing of the original software of windows 8 for windows 7 ultimate, I can't find how to access the camera.

    Original title: webcam

    On my laptop hp15r, it is built in hp truevision hd webcam. After the downsizing of the original software of windows 8 for windows 7 ultimate, I can't find how to access the camera. Can someone help me with this problem?

    I have a laptop HP Windows 7.

    Type truevision or webcam or similar in the top of the start menu search box > right-click on the result, then select > open file location.

    My webcam can be found > lecteurC > Program Files (86) > Cyberlink > YouCam

    If I type YouCam in the search box, click with the right button on Cyberlink YouCam, it takes me to YouCam.exe.  You can do a right click on the .exe file and choose desktop (shortcut) so that you can access it from there. Once the shortcut on the desktop you can right click it and choose the PIN to the start menu or PIN to the taskbar tasks.

  • HP Jet 8 5801 how to access the webcam

    I just bought HP 8 5801 stream, product number K5L4OUA. The card that I printed shows it has a front and a rear facing camera, but I can't find how to access the rear side.  The camera screen does not show how.

    Also, how can I return the default tablet.

    Hello mlmarsh2,

    To access the front camera, will be the camera is on and showing the live mode view, wide upward from the bottom and you will see a taskbar with the option 'change Camera.

    I see another post, that you have created that you had difficulty with some applications uninstall.

    To restore Windows to factory, off the shelf.

    Hold down the power button and the Volume button simultaneously for a few seconds.

    A screen lights up showing some options.

    Choose F11 for the system recovery option and follow the prompts.

    Hope that helps.

    PS: If this is the first time you used a Tablet, you may prefer the traditional workstations such as Windows 7 has. You can install Classic Shell Setup on the tablet of flows for the old office and it will work as well as it does on a tower or laptop.

  • The Internet is not accessible after the Windows Recovery virus eliminated

    Original title: Recovery Windows Virus eliminated but now no internet... what the

    I got the Windows Recovery virus and my son has deleted successfully and that he found all the files and I have the office back.  I can connect to the internet if I use another laptop but I can't connect using the infected computer.  I have contacted my provider, but they can help as I have connection so there is no problem.  I'm currently on a laptop, attached to my modem, so I know it's working.  When I use my computer and try to connect it comes up saying "Internet explorer cannot display the webpage".  There is an option to diagnose connection problems, but it does not work for me because I have a connection.  Y at - it is something I need to fix on my original computer to allow the signal through it to say: a registry or something.

    If you see stuff like this (after got rid of the malware):

    Internet Explorer cannot display this webpage
       
    The most likely causes:
    You are not connected to the Internet.
    The Web site encounters problems.
    There could be a typing error in the address.

    We will check your network connection properties.

    Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your disabled Internet access.
     
    Click Start, run and enter in the box:

    Inetcpl.cpl

    Click OK to launch the Internet Properties Control Panel, choose connections, LAN settings.

    Or, in Internet Explorer click on tools, Options, connections, LAN settings.

    These settings control your Internet access for all browsers.

    (If you make settings, write them down so you can undo changes if you must)

    On most environments, not independent, there will be check automatically detect settings and
    the other boxes are (as Proxy Server) is disabled.

    Automatically detect the setting checked =
    Use the automatic configuration script = unchecked
    Use a proxy server for your LAN = not checked

    Make changes, then click OK, OK to save the settings.

    Check your settings for how your network adapter gets its IP and DNS settings.  Most home page
    systems, these parameters must be defined for the system will get the settings automatically.

    If you have another system on your network that works, you can compare these settings with the
    parameters of the system that is not a work and make adjustments.

    Click Start, settings, Control Panel, network connections, and then select your current network connection.

    On the general tab, click Properties.

    In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

    In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings
    automatically.  Select the following two options:

    Obtain an IP address automatically
    Get a DNS server address automatically

    The rest of the options on the screen should then be grayed out/not available.

    Make changes, then click OK, OK to save the settings.

    Restart your computer and test your connection.

    If that is fixed, follow these steps:

    Click Start, settings, Control Panel, network connections, and then select your current network connection.

    On the general tab, click Properties. In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties. Advanced. There should be a tab DNS. Please make sure that the following options are selected:

    Dash in add primary and connection specific dns suffixes and an add parents of the primary dns suffix suffixes and also a check tick to save these connections addresses in DNS.

    On the check tab VICTORIES which allow you to search LMHOSTS is checked and use the default setting for netbios. Now OK out of all these windows. If you have changed a
    These settings please let us know.

  • Different on the MS recovery console administrator password

    When I was with the XP CD recovery console, he asked my password.  When I typed in it, it is incorrect.  However, once I typed in anything, it worked.  I have a single installation of windows, so the first question, which is "what Setup do you access", had only one possibility, of course.  Maybe it was a virus that has changed.  But once I took action, the usual log on screen appeared, and my password worked.  Is the recovery console suppose to do?  Why?  This is my 3rd time only having to use the console. most of them have been guided, anyway.  I'm not familiar with the controls.

    Unfortunately, we do not know much about your system, so we have to endure a round of Q & A to provide the best advice.

    What is your Version of XP and the Service Pack?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    The XP Recovery Console "must" the XP administrator password, and the default XP administrator password is any password empty or empty, so if you just press the Enter key has the prompt for Password Recovery Console, which usually works.

    The RC will always ask you which installation you want to use - even if you have just a single installation (this is normal).

    Sometimes people may not enter the RC because they do not know, I forgot or never knew their administrator password... then they're stuck - but only temporarily.

    Sometimes the way XP has been installed (as in a store bought system) can thwart attempts to get past the Password Recovery Console.

    If it is your desire, you can configure XP simply do not ask for a password when starting in the Recovery Console.

    If you do a search on the Internet (Google, Bing, etc.) you can find a lot of articles on the use of the Recovery Console.

    Here are some links of Microsoft on RC orders:
    http://support.Microsoft.com/kb/314058
    http://support.Microsoft.com/kb/307654

Maybe you are looking for

  • How can I remove a title that appears in the upper right of my TV when you play AirPlay of Safari?

    So, I made a video for my in-laws some time ago, named "Dryland Organics, 2016" (just of images with a soundtrack of Bumblebee) and to test how it would look, I Mirroringand the generated m4v file in my ATV4, which, for some, reason to put an overlay

  • He changed the login

    Hello! After the accident yesterday, I could not access your account, password recovery did and it turned out that my login somehow changed (remove 2 characters) and therefore lost all contact. How did this happen and how can I restore it?

  • Print cartridge

    is someone can you please tell me why I'm suddenly getting the message "incompatible cartridge", appearing on my cc480 all in one printer. It has been great so far and I'm using the correct hp cartridges that have not run out why should he suddenly d

  • Loss of Internet with Wndows Update

    Same problem here.  Also made a recovery and automatic updates disabled.  I noticed that there are 7 updates in version 8/14 for Windows.  No one knows who the offending update?  Maybe the Cumulative Update of security for IE 9 and 3 other security u

  • webcam HP envy problem

    I have a laptop HP Envy with windows 8 is installed, and for some reason, the laptop is unable to find or use the webcam which is already there. HP Truevision HD. When I opened the window of properties of this device I get this message: currently, th