Re: How to connect to the mobile phone via the com port

Hello
I have problem with connecting my Nokia n82 (s60) phone to bt via COM port. I want to connect mobiola webcam and need it. Can U help please?

Hello

Satellite A300 Vista preinstalled
Battery Bluetooth version 6.10.07
Motorola Razor V3 mobile phone

Not the same mobile phone, but the principle is the same.
Without doing anything special, I connected my phone to the laptop in a minute.

Allow BT using FN + F8
Open Bluetooth settings, click the BT symbol in the taskbar
Click on new connection
Select the Express Mode > mode activate Visible on laptop > click OK
On the new connection wizard, choose phone list and click OK
When offered choose security PIN (for example, 1234)
Check connection on mobile phone and enter PIN security
After the PIN CPM40 control port will be enabled

Then now is your phone connected to your laptop and you can, for example, transfer files from the phone to the laptop.

By the way: what model of laptop do you have and which version of battery Bluetooth?

Tags: Toshiba

Similar Questions

  • How can I clear the COM ports that are appearing as in use

    Original title: used Com Port

    I have a device plugged into my laptop Lenovo XP with service pack 3 and it is to this day. When I try to reassign the com port on the unit to the USB port using the Device Manager, I find 2 to 11 com ports are in use. How can I erase these com ports as there nothing to use them?

    You are welcome.

    There should be a printers and Faxes folder in Control Panel (see photo)

    http://www.onlinecomputertips.com/tutorials/control_panel.html

    See if that helps

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/all-the-icons-disappeared-in-the-printers-and/96f54795-d27f-E011-9b4b-68b599b31bf5

    How to remove printer ports in Windows XP

    http://www.ehow.com/how_8120289_delete-printer-ports-Windows-XP.html

    To remove a Port

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_delete_port.mspx?mfr=true

    How to remove com ports in Windows XP

    http://www.ehow.com/how_6216286_remove-ports-Windows-XP.html

  • How to detect if the GPS device is connected to the COM port.

    In fact I use Java Comm API to get the GPS NMEA string.

    But I want to know, how to automatically find what serial port has the connection to the GPS receiver using the java program?

    Please answer me if anyone knows?

    Thank you

    Kind regards

    Maxim G

    Iterate over the ports series, until answered correctly.

  • How 'open connections' to the TCP port?

    Apparently I need it to connect iPhone app of F1 to the internet via a wireless router.

    (App does not correctly appear on the iPhone)

    Thanks in advance for any guidance.

    Denis

    You read the documentation that came with the router or contact their support staff.

  • With the help of VISA can not find the com port

    I use visa read but cannot find any com port in Windows 7.

    How can I find the com port in Windows 7?

    Windows 7 is not released. A version of LabVIEW for windows 7 is not released. A version of NI-VISA for windows 7 is not released. Wait until MS releases windows 7. Then wait tile view deleted OR made available versions of LabVIEW and NI-VISA that work with windows 7.

  • Please help with my password. After trying to connect using a mobile phone, access has been denied. Saying: my account has been blocked

    original title:

    Finally, I registered my account some time in August, 2010. I noticed that when I tried to sign new after trying to connect using a mobile phone, has been denied access. Saying: my account has been blocked because I tried o identify you on several occations. My pin code is * and my email is * address email is removed from the privacy * help me with my password recovery I did not had access to my account for some time. Thank you and God bless you!

    Hello

    you ask about Hotmail?

    If so, we can help you not in these responses Vista Forums

    Please repost your question in hotmail in the hotmail link below forums

    http://windowslivehelp.com/product.aspx?ProductID=1

  • How to connect to the PC?

    I have problems connecting my crush to my computer. At first I thought it was the SD card, I bought at the store of the cell - I went and bought a new one, that does not work. I put both cards and reading the manual. However, when I insert my USB in my computer, I get a note saying: "the disk in drive E is not formatted. Format it now? "When I click on Yes - It then proceds to tell me to drive cannot be formatted. Now when I try to find my memory card - its completely gone! Help!

    chanondesirae

    Repeat the process of formatting your phone memory overwrite... Make sure that it is not connected to the USB cable

    See Crush online manual p. 48:...  Crush

    Tap Settings on the main screen you...

    Setting > memory > memory card > format card

    • Don't forget... so that the phone crush is connected to your computer via. USB, most of the functions of the phone do not work.
    • Phone crush also card does not appear in 'Settings' until the USB of the PC cable is disconnected

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Have you set the USB Mode mass storage on your Crush in definition... see pages 45 & 46 also in the manual to learn How to connect to the computer

    Post edited by: Poko... to include mass storage Mode information

  • What is the location of the song performed by using Windows media player from a mobile phone via bluetooth

    Original title: open song of mobile phone via bluetooth and it copied and played, but I don't know where the file is copied into

    I connected my cell phone with my laptop via bluetooth. When I was browsing record music from my phone to COMPUTER I double click a song and instead of playing an open window and it showed a COPY... After that it is copied, the song is played by media player.

    Where in my laptop it has copied the song? What path or a folder? Impossible to find...

    I have windows 7 64 bit.

    Hello

    See this link:

    Find items in the Windows Media Player library
    http://Windows.Microsoft.com/en-us/Windows7/find-items-in-the-Windows-Media-Player-library

    I hope this helps!

  • How to connect to the server from VPN Windows Sever?

    Hey guys, I recently created my own VPN server to connect to my home network using Windows Server 2003. I know I probably still need to do this if I don't know what I have to do, but how to connect to the server, or at least set it up in order to be logged in? I think I got the computers communicating with each other, but I think that I am running into errors of authentication. Could someone point me in the right direction with regard to what I have to do what I already have Setup? Thanks in advance.

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Need to know how to connect to the internet, anywhere

    Original title: internet connection on laptop

    10 years ago, I got a laptop and was able to connect to the internet anywhere I went. I don't remember how I was able to do it without a motem

     

    Hi Susan,.

     

    Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

    Want to know how to connect to the internet wherever you go.

    You can use USB dongles to connect to the Internet via a wireless connection.

    We need more information to help you better:

    What version of OS are you using?

    You can use your favorite search engine to search for USB dongles.

    Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    You can also contact an Internet service provider for assistance.

    I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

  • How to connect to the database

    Hi all

    I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.

    I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.

    Can someone help me please.

    Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.

    Good luck!

    Ian

  • How can you stop safely remove hardware to appear when there is nothing connected to the USB ports?

    Orifginal title: Aggrevation

    How can you stop safely remove hardware to appear when there is nothing connected to the USB ports? It is causing my screen lock and give an error does not.

    Hi ElginCarelock,

    You can try to restart the computer and check.

    Uninstall all USB device manager entries

    a. Click Start and typedevmgmt.msc and press ENTER.

    b. expand Bus USB controllers.

    Note: You will need to scroll down to find this point.

    c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

    d. Repeat steps above for each controller USB is listed under Bus USB controllers.

    e. restart the computer and check.

    Hope this information is useful.

  • using the KDL-46W700 how to connect to the wireless keyboard and wireless mouse

    Hello

    I use KDL-46W700 how to connect to the wireless keyboard and wireless mouse

    Unfortunately, you can not connect a keyboard wirelessly on your TV. Your TV will need a driver for this. Sad thing, it's impossible to install anything on the tv, which includes the driver for the external devices such as a wireless (except USB) keyboard... I recommend the SIDEVIEW TV application that has the remote control / function keyboard and mouse... this app is free and can be downloaded via Google Playstore... ^^.

  • How to connect to the server ESXI vSphere Client side WAN?

    How to connect to the server ESXI vSphere Client side WAN?

    through firewall

    I tried to open the ports 902 903, 443... and so on...

    and I tried several sites to find the solution but...

    nothing works...

    connectivity works on local network

    Help, please...

    Source Destination Port

    ESXI 443/TCP client

    ESXi 902/TCP client

    ESXi 902/TCP Client

    ESXi 902/UDP Client

    ESXi 903/TCP client

    Edit: Also check if the firewall ESXi all IP addresses are allowed to connect:

    Example:

    See attachment...

  • Matching Motog phone with PC Windows7 but not displayed in the COM PORT Section

    HII, I finished my phone of MotoGP with Windows 7 PC via bluetooth pairing. Then I went to change Bluetooth settings and tried to find my phone in the COM Ports Section, but I was not able to find my Phone.I has also tried to add the COM Port for my phone but it did not show in the outbound connection section. Help, please

    Hi Kunal,

    To help solve your problem, please see the answer posted by DominicP on this link.

    Feel free to get back to us if you have other concerns.

  • SmartView Essbase connection on the default port, must connect to 6423

    Hi all

    We have Hyperion 11.1.2.2.30x installed and configured with full SSL everywhere.  With this, we have Essbase successfully listening on 6423 (6423 only, we have disabled 1423) safely and all components (planning, EN, Calcmgr, etc.) are in communication with success too.  Thereby when attempting to connect to Essbase via SmartView, we receive an error stating ' unable to communicate to < essbaseservername >:1423.  The issue is that SmartView trying to connect on the default port (1423) instead of the safe harbour 6423.

    In environmental assessment, we have added a provider using the secure connection (< essbaseservername >: 6423: secure) that we are able to use in environmental assessments, but in SmartView is always looking for 1423.  No idea where this becomes SmartView and or how I can get it to connect to 6423?  Thanks in advance for any help you are able to provide.  In addition, all other connections through SmartView (SSL) are able to connect successfully.

    SmartView version 11.1.2.2.310

    Hyperion: all versions 11.1.2.2.30x

    If SSL is enabled by the EMP for Essbase configurator and the value of setting SSL configuration in the essbase.cfg then when you connect to Essbase in Smart View the safe option should be available for example "EssbaseCluster-1: SURE.

    See you soon

    John

    http://John-Goodwin.blogspot.com/

Maybe you are looking for