Re: How to disable bluetooth on Satellite C660

Similar Questions

• How can I restore my Satellite C660 to factory settings?

  Hi all
  Just a quick question. How can I restore my Toshiba Satellite C660 to factory settings? I have no disk recovery etc., and there is nothing on the PC I need to back up. Just a simple factory to its original settings restore,

  Some sites say press 0 (zero) and follow the instructions. Others say press F8 and follow the instructions. I hope that one of them is correct but which?

  Thanks in advance.

  If you n t have recovery DVDs (you didn't create it) you can install the recovery image according to instructions in the
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  If this does not work you need to order the original restore on https://backupmedia.toshiba.eu/landing.aspx disc

• Bluetooth in Satellite C660 - 10H

  Hello.
  I have a satellite C660 - 10H and bluetooth does not work. I downloaded the battery Bluetooth of this Web site. But it does not work.
  Any advice?
  Thank you

  Are you sure that your laptop is BT inside?

• How do I update a Satellite C660 PSC0QE BIOS from linux

  No idea how I can update a PSC0QE C660 of linux? It works really well, but the keyboard problem is very annoying.

  You cannot update the BIOS win Linux-based!
  You must use Windows to Win-BIOS update.

• How to disable Hypermemory on satellite Pro L650 - 17 p

  Hallo,

  in my computer laptop are 4 GB of installed RAM, but due to Hypermemory, I'm only able to use less than 3 GB. I often use a lot of RAM, so my question is how to disable the function Hypermemory.
  I've planed to upgrade memory up to 8 GB, but then I read that if 8 GB are installed, the use of memory by Hypermemory will extend up to 3 GB so that I can only at the user up to 5 GB of RAM. This makes the insane level RAM.

  * So, is it an opportunity to disable Hypermemory? *

  I looked in the BIOS (version 2.20) for this purpose, but it was not such an option.
  I'm under Win7 in 64-bit, so the allocation of memory is not a problem.

  Hello

  > So is it an opportunity to disable Hypermemory?

  It is not possible.
  A part of the main memory is shared by the graphics card and this is controlled automatically by the graphics driver.
  AFAIK you can also find this information in the user manual

• Satellite L655-1HC - how to disable Bluetooth using Win 10

  Hello

  I am using TOSHIBA SATELLITE L655-1HC, recently upgraded to 10 of Windows, but my Bluetooth is not be disabled.

  I tried everything, but no result at all. I think maybe it's like the driver support for Windows 7.

  How can I for me? or is there another solution to make of (the necessary key is missing, by the way).

  1. go to "Device Manager".
  2. in Device Manager, expand Bluetooth.
  3. right click generic Bluetooth adapter and update the driver.
  4. re-start.
  5. now you should be able to turn off/turn on the BT

• How to activate bluetooth on Satellite Pro C850?

  Hello

  I'm having trouble if/how understanding I can activate Bluetooth on my Satellite C850D-12V (PSCC2E - 03300JEN). The operating system is Windows 8-64 bit.

  The technique of the product (http://www.toshiba.co.uk/discontinued-products/satellite-c850d-12v/) does not BT then, first of all, I would appreciate advice on how to check whether my laptop is equipped with BT

  If my laptop has the necessary equipment, should it be activated via the download of a driver (e.g. Realtek Bluetooth Filter Driver Package, version 12.24.0802.2012)?

  If my laptop is not equipped BT, this can be solved with a BT USB adapter? What would the specification required for a USB BT dongle? Do I still need to download a driver?

  I apologize for the issues. Despite my attempts to research answers to myself, I'm from very limited in this area.

  Any advice greatly appreciated.

  Thank you very much

  Hi Dino

  Your machine according to the specifications of the laptop has no BT module so you have to use the external device. Best solution is BT USB dongle. Visit the nearest PC store and there you can choose one that fits. Talk to your local dealer and I m sure they can help you make the right decision.

  Usually, when you buy external device driver is included for installation should be pretty easy and user-friendly.

  And please do not apologize for your basic questions. ;) If you have any other questions you are welcome.

• How to use Bluetooth on Satellite U200

  Hello

  I have the Satellite U200 and the Bluetooth version v5.00.10 (T).
  I have no idea how can I use my Bluetooth to transfer files between my computer and my cell phone (Sony ericsson k800) or between my laptop and other computer portable...

  In fact, when I opened the file wireless transfer and click Search to find transfer device, a dialog box opens "Bluetooth has not begun."

  So, can someone help me please?

  Thanks in advance
  Hello

  I have the Satellite U200 and the Bluetooth version v5.00.10 (T).
  I have no idea how can I use my Bluetooth to transfer files between my computer and my cell phone (Sony ericsson k800) or between my laptop and other computer portable...

  In fact, when I opened the file wireless transfer and click Search to find transfer device, a dialog box opens "Bluetooth has not begun."

  So, can someone help me please?

  Thanks in advance

  Check if your antenna switch is on!
  I also recommend you take a look at the following Web site:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ/keyboardnotworking

• How to activate Bluetooth on Satellite P200

  Hello

  I bought a new computer Toshiba Satellite P200 - 1C7 and I do not see where I can activate bluetooth.
  I installed bluetooth monitor and download bluetooth stack.

  On the Web from Toshiba site, explained that we need to check the presence of bluetooth inside by the letter B after the number of PCs under him, but I can read BT HD L M W so I think bluetooth is in the computer.

  So can you tell me if it is or not the case and if it is Yes, how to enable it.

  Thank you very much for your answer.

  Hi Emilie

  Firstly you can activate and use the only if BT it s is available on your laptop.

  Therefore, you should check if your laptop is equipped with the BT module.

  If the BT module has been installed, then you should find a BT tag at the bottom of the unit.

  I guess that you will not find this label because your device was not equipped with internal BT module.

  See you soon

• How to activate bluetooth on Satellite P200 Manager - 1C7

  I installed a bluetooth dongle on my Toshiba Satellite P200 - 7 1 so I downloaded the bluetooth Manager and battery bluetooth.
  Or when I tried to use the bluetooth Manager, he says there's 25-day trial.

  So I wanted to know how to activate the bluetooth Manager?
  If it is not possible, can someone tell me what software can I use (bluesoleil doesn't).

  Thank you very much for your answer.

  Hello

  Toshiba Bluetooth stack on the Toshiba site is customized and designed for Toshiba laptops.
  You must use the battery Bluetooth that is customized for your laptop. Then you should not activate any BT

  But look, man. your Satellite P200 - 1C7 seems to be NOT equipped with internal BT module from Toshiba!
  That's why you should switch to another external solution.

• How to disable HT on Satellite L850 - 1 Hz?

  Hi all,

  I recently bought a laptop Toshiba Satellite L850 - 1 Hz, but I wanted to turn off HT but on the BIOS, there is no parameters for such a thing.
  How can I do? Is there any hidden BIOS menu type? Y at - it a special key that I have to press on in the BIOS?

  Looking for an answer.

  Best regards

  Carlos Pinho

  Hello

  You want to disable Intel Hyper Threading?
  It is a feature of CPU and generally this can be enabled / disabled at the BIOS level only.
  So if the BIOS does not have this option, you will not be able to disable it.

  Also the Toshiba utility HWSetup contains some BIOS settings that may be changed to Windows system, but if the BIOS does not have this option then the Toshiba HWSetup does not contain this option too.

• How to disable SATA on Satellite U300 settings

  How can I turn off SATA setting to install Windows XPon another partition Satellite U300?
  E-mail: [[email protected]]

  I don't understand why you would do this, but that's your thing.
  Enter the BIOS settings and under ADVANCED options there should be an option Mode SATA controller. Assign the compatibility.

• How diassembly to clean the Satellite C660

  Hello

  I have toshiba C660-1u1.
  I want to know how disaseembly to clean the processor and the fan.
  A manual disassembly or step by step.

  Concerning

  Hello

  I would not recommend to disassemble the laptop only to clean the fans.
  Disassembly is delicate and you will lose the warranty.
  But it is important to know that you can clean the fans using a jet of compressed air. It's good enough to get dust and debris removed cooling modules.

  This could be interesting, too:
  + How to clean a Toshiba laptop cooling system +.
  http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htm

• How to install bluetooth in Satellite A100-787?

  The doc that comes with Bluetooth monitor for this computer says that certain files must be present in the c:\Toshiba directory but I n t have this directory at all in my computer. I installed the BtMon2Inst.exe file (which is recommended for installing XP SP1) which seems to have installed fine but do not know if Bluetooth or not functions.

  Any idea on the steps and files needed for a correct installation?

  Bluetooth Monitor you can find on the download page of Toshiba. Search for Satellite A100 (PSAAN). Download and install Bluetooth monitor.

  According to the Instructions of facilities, you must install the Bluetooth stick and then Bluetooth Monitor. BT can be activated using the FN + F8 key combination.

• How to disable touchpad on satellite series?

  I need to disable the touchpad on my new Equium - cos it's driving me crazy when I use a mouse.
  The flashcards have disabled so I can't access the Fn/F9 road. I tried to run the Flashcards utility but it hangs when I click on apply.
  Is there another way to disable the touchpad?
  If this is not the case-how come back the flashcards?
  Help, please.

  Hello

  simply remove the flashcard software, and reinstall it. Whereas the problem?
  And to disable the internal mouse, just go to Device Manager and disable it, it's the easiest way...

  Any other questions?
  Welcome them