Re: How to start the recovery from the hidden partition?

Sorry for my English.

I reinstalled Windows from DVD Windows (win Vista) because I get blue screen sometimes. After the reinstallation, I had the same problem again.
Now the shop wants to charge me for the service because recovery F8 does not work. I still have this hidden partition, but I put t know how to do the recovery. Any chance of fixing the problem?

I don t care about the data and the blue screen, I think than is hardware problem.
Thank you

Hello

Now you have the problem. You can start the recovery folder HDDRecovery facility just if your laptop has the factory settings.
When you use Microsoft facilities disk for the installation of the operating system, this option will be gone.

You have created recovery DVD such as recommended by Toshiba?

Tags: Toshiba

Similar Questions

  • How to release the hidden partition

    My key recovery tool is not necessary, so I uninstalled it my idea Notebook 500 Lenovo.

    Now again 22GB are consomed by "someghing" - potentially a hidden, partition created by onekey recovery tool I've ever wanted.

    My idea book has 128 GB SSD drive and he told me that only 105 GB are put at my disposal. How can I make more memory available?

    Thank you.

    Hi oliver_bu,

    Welcome to the Community Forums.

    Heads up, remove the recovery partition voluntarily would be to cancel your request for recovery software.
    Either you create a recovery drive / clone or buy recovery media to recover your Windows 10.

    Sharing of certain discussions and information for review.

    Understand the partitions of hard drive on Lenovo systems

    Remove all the HARD drive recovery partition incl. disk partitions

    Other options

    Update us how it goes for you.

    Concerning

  • Does anyone know how to access the hidden partition in a Sony Vaio VGCRA830G desk top?

    The Sony Vaio VGCRA830G integrates a backup partition in which you can restore your entire system without having to insert the discs I think? I tried to enter the Recovery Wizard, but it says that it cannot find the path. Anyone know how to get into this hidden partition, or find the path to the files, where is the path of the wizard?

    See if it's useful:

    http://www.CVM.ncsu.edu/CR/HOWTO/how%20To%20Burn%20Cd%20with%20XP.htm

    Tom Ferguson

  • Satellite A300-1MT - how do I access the hidden partition

    Hello

    I have the model Satellite A300-1MT and I don't know how to access the hidden partition.

    Hello

    Why you want to access the hidden partition?

    Do you know why this hidden partition has been created on the HARD drive?

    This hidden partition is created automatically by Vista and it contains backup files that are needed to repair the operating system if something will go wrong.

    It s not advised to access this partition or delete it!

  • Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

    Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

    So what measures through 'install '?

  • How to start the assessment without a device

    Hello

    I downloaded the evaluation version.

    How to start the assessment without a device?

    Thank you

    DV63

    Hi DV63,

    Welcome to the Forums EITHER!

    If you downloaded an evaluation version of LabVIEW your 30 day trial must begin immediately after being invited to enter a serial number. You can choose not to enter a serial number and this will begin your trial period. I recommend that you install OR-DAQmx device drivers; It is a software that allows you to communicate with the hardware from National Instruments DAQ. However, this facility will be particularly useful because it allows you to simulate an Instrument with the measurement and Automation Explorer (MAX); This means that you can immediately start the signals in LabVIEW.

  • I tried to turn on windows defender and he said that there is an error. It will not turn back. Anyone with information would be a great help. How to start the service manually?

    I discovered that Windows defender is disabled. I tried to turn it back on, and he said that there is an error. How can I turn it back on? Anyone with information would be a great help. How to start the service manually? __

    Hello
     
     
    could a. you give us the exact error that you are experiencing?
    (b) also mention the error code, as well if it is listed.
    have c. you installed other software security like McAfee, Microsoft Security Essentials etc. ?
     

    Let us check if the service is set to automatic.
    1. Click Start-> run and type services.msc
    2. now, locate the service named Windows Defender,
    3. double click to bring up the Properties window.
    4. set the startup type to automatic
    5. click on apply, and then click Start
    6. click OK, and then click Close window Services/Local
     
     
    We hope to hear from you soon.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I can't understand how to start the calendar after the migration.

    I can't understand how to start the calendar of lighting. Documentation, said he will start automatically, but it doesn't.

    I reinstalled Thunderbird with the XPI in the folder with the exec install and now it works. Install documentation is poor.

  • How to start the database using CRS to start the database instance

    Dear Experts,

    How to start the database using CRS to start the database instance

    As a solution: remove the write permission on the/etc/oratab user database to prevent update to arrive.

    There is no harmful effects known to CRS / RDBMS operation if this workaround solution is used. This has been discussed in Bug 13028802.

  • How to start the database and servers after the installation of the Webcenter JSK Portal

    Hello

    I finally installed the portal WebCenter using JSK, after it turned off the machine, I don't know how to start the database or server, I need to set the environment variables? create the oracletab file? or is it a file .sh to start the database and servers?

    Any help will be great!

    Best regards!

    Thanks Françoise-Oracle for your response

    As you say, I need to go to /WCPortal_JSK_Linux.x 86-64/linux64, I found all the scripts that I needed to start or stop a server or database. But more especially if you run evertything, (I did) you just need to run the de./startup.sh script and wait, he'll run, but take some time.

    Best regards!

  • How to start the agent on the database host computer that is being monitored

    Hi all
    I installed OEM 11.2.1.0. I stopped getting alerts after the 1 server node is restarted. I followed RAC database.
    When I checked the status of the host agent I get the following output
    [oracle@rs1pre91dvdba01 bin] $ pwd
    / u01/app/Oracle/agent11g/bin
    State of the agent emctl [oracle@rs1pre91dvdba01 bin] $
    ORACLE_UNQNAME environment variable not defined. Please install ORACLE_UNQNAME in unique name of database.
    [oracle@rs1pre91dvdba01 bin] $ export ORACLE_UNQNAME = MDM11
    State of the agent emctl [oracle@rs1pre91dvdba01 bin] $
    The MA Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/rs1pre91dvdba01_MDM11 not found.
    [oracle@rs1pre91dvdba01 bin] $

    And even on node 2
    [oracle@rs1pre91dvdba02 bin] $ pwd
    / u01/app/Oracle/agent11g/bin
    [oracle@rs1pre91dvdba02 bin] $ export ORACLE_UNQNAME = MDM12
    State of the agent emctl [oracle@rs1pre91dvdba02 bin] $
    The MA Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/rs1pre91dvdba02_MDM12 not found.

    Please can I know how to start the agent on the nodes and also auto how the boot process of the agent on the server restart

    Thank you.

    I assume that you have installed your agent in the directory

    / u01/app/Oracle/agent11g/bin

    If this is correct then run the following commands

    Export ORACLE_HOME = / u01/app/oracle/agent11g /.
    export LD_LIBRARY_PATH = / u01/app/oracle/agent11g/lib

    PATH = $ORACLE_HOME/bin:. : $PATH; export PATH

    As a matter of fact, you need to set the environment variables separate for the agent to execute commands
    which are related to the agent. These distinct environment must be set correctly to ensure that the
    commands can be found in the appropriate directories...

    Then, run the status command emctl agent...

  • How to start the service in order

    Hello

    I'm new to Hyperion.
    Can someone tell me how to start the service for HFM, planning and Essbase?

    Thanks in advance...

    Han

    Please read the following document:
    http://download.Oracle.com/docs/CD/E12825_01/EPM.111/epm_install_troubleshooting.PDF

  • How to start the isqlplus

    Hello
    I installed the database 10g on linux
    How to start the isqlplus in the browser window

    Is there a command that I need to run
    pls help

    See:
    http://download.Oracle.com/docs/CD/B19306_01/server.102/b14196/em_manage006.htm#sthref168

    Edit
    In fact, there is an OBE on this subject as well:
    http://www.Oracle.com/technology/OBE/obe10gdb/install/isqlplus/isqlplus.htm

    Published by: hoek on December 30, 2009 08:38

  • How to start the database aautomatically

    Hello

    Oracle Version: 10.2.0.1(standard edition)
    OS: FEDORA 7

    Can someone help me please on how to start the base database automatically when the server is in place.

    http://www.Oracle-base.com/articles/Linux/AutomatingDatabaseStartupAndShutdownOnLinux.php

    Good, nice and clear link to auto-start the PB on linux.

    HTH
    Girish Sharma

  • Satellite L300 - I can recover from the hidden partition

    Hello

    The vista on my L300 will not start.

    I try to use the modem for the first time, but he could not communicate with the line. So I delete in "Device Manager".

    After the reboot, vista boot screen appears only for 3 seconds then restart the laptop. There is no way, no safe mode...

    Contact the hd as an external drive XP say 'unknown' 0 bytes, with Linux just like named 'vista' and I could open all the files.

    I have no recovery. DVD burning with the Toshiba Recovery program has failed tree times and so I give up.

    the hidden partition is ok. On my laptop from a different manufacture, I can recover from this hidden partition. Is it possible to do it on my L300?

    Thanks for the information

    Thorsten

    Hello!

    The hidden partition you want to say has nothing to do with the Toshiba recovery image.
    There are files for system restore, and it is a feature of Vista, not Toshiba. If you want more information about the restore of the system here is a good article from Wikipedia:
    http://en.Wikipedia.org/wiki/WinRE

    The HARD drive recovery folder contains the original recovery image and if you don t have access to this folder and do not burn the recovery disc, you need a new.
    You can get one from an ASP, but you can also order a disc here:
    https://backupmedia.Toshiba.EU/landing.aspx

    Good bye

  • How to display the hidden files and folders even if I've already enabled "Show hidden files, folders and drives" to "Advanced settings"?

    How to display the hidden files and folders even if I've already enabled "Show hidden files, folders and drives" to "Advanced settings"?

    After I enabled "Show hidden files, folders and drives" in 'Advanced settings', I can't yet see in the folder but I know there is a file in this program of WinRAR folder form as pictured below where I opened the case both at the same time.

    Hope you can help in this case...

    It would be possible that the file is marked as a system folder (which is just a check box in properties such as the hidden check box). So in your folder options, uncheck the "Hide protected operating system files" and see if it will be visible.

    Or another thing to try: remonter back a level, hold down SHIFT while you right-click the complete file and choose "Open command window here", then type DIR to see if the file is listed.

Maybe you are looking for