Re: hp mini 110-3538tu BOOTMGR is missing

After that I tried to reinstall windows 7 it would not let me and now it just says BOOTMGR missing and I can't do anything with it. Pls help someone.

This may help out you:
http://www.SevenForums.com/tutorials/104341-Bootmgr-missing-fix.html

Thank you

Tags: Notebooks

Similar Questions

  • HP mini 110-3538tu

    On the hp mini 110-3538tu it says system disabled the 74647960. Pls someone help as I got the administration password or power on password. See you soon.

    Hello

    External keyboard will decide on a possible problem with notebooks built to the Board of Directors.

    Another option would be to remove the RTC cell - see Page 61 of your Service Guide & -hold the power for 30 seconds, then leave the machine for a few hours before you reinsert the cell of the RTC.

    The only other option would be to contact HP.

    Kind regards

    DP - K

  • Pls help I'm totally stuck trying to reinstall windows 7 on my computer hp mini 110

    I have a hp mini 110-3538tu and he played in all directions upward and very slow, so I have a USB stick with Windows 7, which I am trying to install on windows 7 starter edition, but when I get to the part where I have to choose the driver to install, I can choose my USB but it says no device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK. I can't have happened here. A beautiful person out there can pls help.

    Hello:

    See if it works...

    I zipped and attached the controller driver SATA NM10 your laptop uses the label of attachments below...

    Unzip the file and copy the content without all the folders in your USB flash drive or flash drive, if you have two usb ports.

    With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

    After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

    You should now see the storage driver files listed (or access them if you put them on the same flash drive than your installation of W7 file).

    If you check the box, it only includes the compatible driver.

    Follow the prompts and hopefully, W7 should install.

  • HP mini 110-1129nr with windows xp home edition, following the file is missing or corrupt \windows\system32\config\system model doesn't have a cd/dvd drive. Help, please!

    HP mini 110-1129nr with windows xp home edition, on said boot computer could not start because the following file is missing or corrupt \windows\system32\config\system computer has no cd/dvd drive. Computer does not load in safe mode, I ran disk hard main test self test it says completion test: failure, check the status: 7 (filled with the read element of the test failed). Help.

    You need an external DVD drive to get the repair will.

    Also the device you own does not seem to have built in the recovery partition. I'm not sure about later versions of this machine, however, it is best to check with HP.

    The problem is that there is a corruption of the registry on your OS or the system could not find where the registry files are due to system files or boot corrupted file.

    A repair can be made with an external DVD, the worst case, is that if the repair doesn't work you reinstall Windows.

    See this page from HP

  • network missing HP mini 110 driver

    Hello

    I have a laptop hp mini 110-1100 series. The windows operating system has no load due to missing drivers and I had to reinstall windows vista 32 bit. However, now miss me several drivers. I was able to find most of them, but I can't find driver for wireless network controller. After looking at several forums, these drivers but only exist for XP. Can someone help me find the driver for Vista?

    This is the id of the hardware:

    PCI\VEN_168C & DEV_002B & SUBSYS_303F103C & REV_01

    Thank you!

    Please try the drivers from the following link:

    FTP://ftp.HP.com/pub/SoftPaq/sp42501-43000/sp42654.exe

  • HP Mini 110: HP Mini 110 missing drivers (network and video)

    Hello, I have a problem with a HP Mini 110, I just reformarted with windows 7, the problems with drivers where actually manifestating before, I thought that with the formatting and the instalation of windows 7 would be resolved. In the hardware devices list, I see that the video controller and ethernet controller network controller are missing, I tried to install the drivers provided on the official website, but none of them worked. Need help please, I can't connect the computer to the internet! I think this wifi card or card internet, any name, no drivers are installed or they have just "disappeared".

    Hello:

    Based on the number of product you have validated, you need these drivers...

    Video:

    This package contains the Intel Mobile Graphics/VGA driver for the notebook models and operating systems.

    http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48988.exe

    Ethernet:

    This package contains the network for the Realtek RTL8103EL NIC driver in the notebook models that are running a supported operating system.

    http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48804.exe

    Wireless:

    This package contains the Broadcom wireless LAN drivers that are required to activate the integrated Broadcom Wireless LAN Adapter in the notebook models that are running a supported operating system.

    http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48591.exe

  • HP Mini 110-3000: after formatting wifi network icon missing

    Dear Sir.

    I have HP Mini 110-3000. As there is problem in my original preloaded operating system so I formatted and installed windows 7 ultimate 64 bit operating system.

    After formatting, find it me impossible to see the wireless network icon in my tray instead it is another icon that is used to connect to the internet using a LAN cable.

    What is the problem?

    Hello:

    Go to Device Manager and look at the list of devices it.

    Is there a device listed in the Device Manager, labeled as a network controller?

    If so, this is the wireless card that need to install the driver.

    If you don't know which driver you need for the wireless card, please report it to the listed hardware ID of the device that you see as a network controller.

    To find the hardware ID, click the network controller device.

    Then click on the Details tab in the upper part of the window network controller.

    Now you will see a drop-down list of property, and it will be set to the Description of the unit.

    On this list and select the 2nd item (Hardware ID).

    After the first string of characters you see in the window.

  • Mini 110: Missing password of HP Mini 110

    A Mini 110 gave to me. No password information. Three trials and error fatal cnu92136cn rises. Any idea, the reset code? Help would be greatly appreciated.

    Thank you

    JIM

    @Jwdiggs

    Enter e9lo73fge9 (3rd character is a lowercase L)

    Kind regards

    DP - K

  • HP Mini 110-3500 does not start

    HP Mini 110-3500 will not start. When I try to start I get a prompt back "BOOTMGR is missing" & «Press Ctrl + Alt + Delete to restart»

    I tried a "Factory Image Restore" and it failed with an ERROR msg '0xe0efooo3 '.

    Any help is appreciated.

    Sorry to hear that Geezer.

    You need to replace the HARD drive and reload the operating system.

    REO

  • HP QuickWeb on a HP Mini 110 3500

    I downloaded the HP QuickWeb on my laptop of 3500 HP Mini 110 running under Windows 7, but after installation a message said that the program is not supported by my computer. Can someone advise?

    Hi NutoHP,

    Welcome to the HP forum!

    I understand that you have downloaded HP QuickWeb, but when you tried to install it you have received the message that it is not supported by your computer.

    If you have lost HP QuickWeb and try reinstalling from a download, you indicated that you are not able to do.

    HP QuickWeb is configured individually for each device. You will need to reinstall recovery. Here is a document to help you. Set up and use the Applications HP QuickWeb. Please note the section reinstall IOS or QuickWeb missing.

    I hope this helps.

  • HP Mini 110-3500: network controller HP Mini 110-3500 driverDevice instance id:

    Help, I can't get the driver for HP mini 110-3500 for win 7:

    1. network controller

    Device instance ID: PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01\4 & 418BFF & 0 & 00E0

    2 USB controller

    Device instance ID: USB\VID_0000 & PID_0000\5 & 840DB8E & 0 & 6

    Help, please

    Thank you...

    Hello:

    You need the drivers for the wireless card.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

    I have no idea what either one is missing.

  • HP MIni 110 - Bios has no option of disk hard sata/IDE

    Hello

    My HP Mini (Win xp home ELCPC HP) can not load in windows because there missing files during startup. So I decided to repair the windows.

    However, I have some problems to load WIn XP Home CD SP2 (not ELCPC HP) at the start. I used closure of IDE - USB hard disk by replacing with CD-ROM instead of hard disk because HP Mini has no optical drive

    The CD has been loaded, but when halfway incoming to the windows installation, I got the BSOD after F6, pilots and BSOD loading to the 'Setup starts windows..".

    The error message was something like this:

    "Search for viruses on your computer. Remove any newly installed hard disk or hard disk controllers. Check hard drive are correctly installed and configured. Use CHKDSK /F to check for hard drive corruption, and then restart your computer.

    Technical information:
    "Stop: 0x0000007B (0xF7A22524, 0 x 0000034, 0x00000000, 0x00000000)"

    I browsed the site and found this recommendation to change from SATA HDD to IDE in BIOS. Strange thing is that I don't see this option in the BIOS. There is nothing a lot of option in the bios. I could only change the boot sequence, tool running, put in place under tension the password. That's all.

    No idea how to change the SATA to IDE hard drive in HP Mini 110? I would really appreciate your suggestion.

    I tried to restore but F11 / F10 takes me nowhere. Nothing happen after pressing these buttons. I wonder why the factory never create a copy for me restore my system if windows problem. I bought Win XP Home and Office, but no backup copy of the preload is created for the user when he is out of the factory. However, I am a little disappointed.

    In any case, would like to hear from any of you on the issues.

    See you soon!

    Have you tried the F6 key to go to Roxio BackOn Track to retrieve?

     

    http://support.HP.com/us-en/document/c01805426

  • HP Mini 110: Lack of Wifi/Ethernet card drivers

    I am currently having the same problem as the OP of this thread:

    http://h30434.www3.HP.com/T5/other-notebook-PC-questions/HP-mini-110-missing-network-adapter-driver-...

    Recently, I reformatted the HARD drive and installed a new version of Windows 7 Starter and could not find the right drivers for the wifi/ethernet cards to work.

    The hardware for the ethernet controller ID is:

    PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04

    And the hardware for the network controller ID is:

    PCI\VEN_168C & DEV_002B & SUBSYS_30A11895 & REV_01

    Hello:

    What is the number of full model of your mini 110?

    The drivers you need are on the support page for your specific model.

    Driver Realtek Ethernet (LAN).

    PCI\VEN_10EC & DEV_8136

    Atheros Wireless LAN driver.

    PCI\VEN_168C & DEV_002B

  • Error then re install windows XP sp 3 on HP mini 110

    HP Mini 110

    1/160 10.1 Intel Atom

    Windows XP sp3

    I tried to re install Windows Xp I received from HP.  I recently bought the computer from rent a Center.  There is no network driver.  I try to save up on PC to a time more early to see if there were drivers then.  I found myself with a password protected sign in which I had no idea what was the password.

    I called HP and they sent me 3 discs.  One with the operating system and the other two.  Application and Driver Recovery DVD and Application Recovery DVD, Microsoft Works 9.0.

    I deleted the partition the with the copy of windows and then reformat the drive.  I have re installed windows XP.  Once he was done, I went to change the floppy and install the applications.  The discs appear not on the PC.   I got a message there is nothing in the drive.  Also, he kept popping up messages that he detected new hardware, showed several types of different materials. None of the drivers could not be found and I would get the messaged that the device will not work properly.  I went to the Device Manager and deleted all conflicts.

    I tried to connect it to the internet in different ways with no luck.   I try to connect directly to the modem.  I also tried and wireless g USB.  Nothing did not work.

    I decided to try to repair the installation.  Maybe I had missed something and pulled out the drive too soon.

    I took R for repair and asked which copy I wanted to fix.  I didn't know what they were talking about.  I tried several different orders and asked the administrator password.  Nothing that I entered was correct.  After that 3 times I received a message that I was locked.

    I decided to go ahead and do a complete re install.  I rebooted and picked up all over again.  The installation has started and got 39 minutes left and an error message pops up saying:

    Setup could not register the OLE Control C:\Program Files\Common Files\System\Ole DB\msdaps.dll because of the following error.

    LoadLibrary returned the error 999 (3e7)

    Setup had problems to register the OLE control following DDL

    C:\Program Files\Fichiers communs\System\Ole DB\sqloledb.dll

    Contact your system administrator, who can help diagnose this problem.

    I rebooted the system and he goes back to trying to reinstall windows and continues to go to a certain point, and the message appears again.  I'm stuck and have no idea what to do next.

    Any help would be appreciated.

    Tamara

    You must start from the disc 1 again.

  • BOOTMGR is missing on the windows xp usb installation

    I am trying to install windows xp professional sp3 32-bit on an hp mini 2140 PC, but when I do I see an error that bootmgr is missing, press ctrl + alt + delete to restart. What should I do?

    I am trying to install windows xp professional sp3 32-bit on an hp mini 2140 PC, but when I do I see an error that bootmgr is missing, press ctrl + alt + delete to restart. What should I do?

    How do you get the USB bootable with Rufus?

    http://dellwindowsreinstallationguide.com/a-clean-install-of-windows/legacy-windows-xp-reinstallation-guide/windows-xp-service-pack-3-standalone-updates/slipstreaming-service-pack-3-windows-media-player-11-and-sata-drivers-into-your-windows-xp-reinstallation-media/

Maybe you are looking for