Re: HP OfficeJet 4500 G510N-Z and Windows 7 Home Premium. Always a pilot missing after installation

Similar Questions

• HP OfficeJet 4500 G510N-Z and Windows 7 Home Premium. Always a pilot missing after installation

  Sorry the post is so long...

  I have installed and reinstalled the software for my printer at least 5 times.  Whenever I get a message that the driver did not download properly.  I discovered that I get this message because Windows search driver on the "Windows Update" updates on the Microsoft Update page.  I use the printer on a wireless home network.  I learned to double check the connection and all is well.  I tried to scan for the first time yesterday and guess what?  Cannot find driver HP Document Manager and uninstall and reinstall the printer again.  I followed every suggestion support on the Web site and the drivers still don't load correctly.  Although I'm not an IT wiz, I'm very capable with computers and the resolution of problems.

  Please give me a solution time.  I interviewed for the job of my dreams last Thursday and I can not send a thank you letter or letter of reference which had been requested because of problems with this printer. I can't lose this job, in this market, it is once in a lifetime chance!

  Otherwise, I'll throw both of the HP OfficeJet 4500 G510N-Z I have a truck available bus or trash!

  Thanks in advance for your support and your help on this.

  Sincerely,

  Becky Gommel

  [deleted private information]

  Hi Becky,

  Follow the steps below

  First step: clear temp directory

  1. tap folder in the race or search programs and files of field

  2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  3. proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-80348-1&cc=us&DLC=en&LC=en&OS=4063&product=3986399&sw_lang

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• HP OfficeJet 4500 G510N-z: HP OfficeJet 4500 G510N-Z and Windows 7 Home Premium. Always a pilot missing after installation

  I have installed and reinstalled the software for my printer at least 10 times.  Every time after a day I losse the driver for my impression.   I use the printer on a home wireless network.i have window 7, I learned to double check the connection and all is well.  I tried to scan for the first time yesterday and guess what?  Cannot find driver HP Document Manager and uninstall and reinstall the printer again.  I followed every suggestion support on the Web site and the drivers still don't load correctly.

  Please give me a solution time.

  Hello @albahras,

  Welcome to the Forums of HP Support!

  I understand that after a day or two, your HP Officejet 4500 Wireless all-in - One Printer seems to be uninstalled from your Windows 7 computer and you must reinstall to get it working again, but only temporarily. I would like to work with you today with the resolution of this problem. Sometimes printers will go into a mode offline on computers, which affect printing. Because your software seems to be actually deleted from your Windows computer, I believe something within the operating system is causing this issue. To solve this problem please can I you follow the steps below.

  Step 1: Run printing and doctor analysis tool:

  If you have not already run this tool, can I please have you run it. HP printing and the doctor analysis tool will run on your computer and the "difficulty of printing" and "difficulty of analysis' questions for you." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Please click here to download and run printing HP and doctor Scan.

  If all retired as fine, please proceed to the next step.

  Step 2: Run Microsoft Fix tool:

  I'm going to make sure has no problem to register in your computer that could be the cause of conflicts of printing, you download and run the Microsoft FixIt Tool. Please click here to access the difficulty it Microsoft tool. Once the site opens, select 'Print, fax, scan, share or save' in step (2). Under step (3) select run now to 'diagnose and automatically fix the problems of the printer and printing '. Once the tool is downloaded, run the tool.

  Once completed the Microsoft Tool, please test your machine to ensure that everything works correctly.

  Please reply to this message with the result of your troubleshooting. If the problem persists there are other steps that can be performed troubleshooting. I look forward to hear from you!

• Impossible to run the installer for HP officejet 4500 G510 install on Windows 7 Home Premium SP1 Toshiba Satellite. Any ideas how to fix?

  Setup running on the HP disc will not work.  No error message, stops just until it loads the installation program.

  I downloaded the site Installer Internet HP (versions complete and base).  Same results - cannot run the installation program.

  I contacted Toshiba, which says it's a problem of Windows 7, and communicate with Microsoft.

  I installed this printer at least 10 times on some other operating systems without problem.

  I want a wireless printer that prints, scans, and faxes, but impossible to get the installer to run.

  Any ideas on how to solve this problem?

  Hi PCCoachFL,

  Printer HP office jet 4500 G510 is compatible with Windows 7. For more information please visit the link below:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=HP%20officejet%204500%20G510%20&OS=64-bit

  I advise you to install download drivers for the printer HP office jet 4500 G510 and check if it works.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3919446&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3919445

  You can also see the article for more information:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information helps.

• Impossible to scan on OfficeJet 4500 G510n-z under 'Windows 7 starter' - installation problem?

  Recently bought OfficeJet 4500 G510n-z and installed the SW CD on laptop Toshiba running Windows 7 Starter - NOTE when installing the SW printer I have had only a single option enabled: "install the minimal SW.

  How and what SW that I need to install to enable support of the san on this laptop?

  FYI:-I also installed this same SW HP on the Windows XP laptop and I am able to scan documents to this computer (in this case, I believe that I chose to install it "Full SW" option that has been disabled during the installation of Windows 7 Starter.)

  Could you provide links and instructions for essences SW install to support scan on Widows 7 Starter function?

  Using the Starter edition, you can scan sing Windows Fax and Scan:

  Use one of the following methods to scan a document.

• Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

  Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

  According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

  • http://forums.zonelabs.com/showthread.php?t=76985 & highlight = Firefox

  "You must update the following plugin:

  • Adobe PDF plugin for Firefox and Netscape 8.2.6
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
       • Open the Adobe Reader program in your list of programs
       • Click Help > check for updates
       • Follow the instructions to update
       • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
     • Download the full installer (If you have NOT installed Adobe Reader):
       • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
       • Use one of the links below:
         • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
         • See also the download link': http://get.adobe.com/reader/otherversions/
     • After installation, launch Firefox and recheck your version.

• HP Officejet 4500 G510n-z for windows 7

  This printer works wiyhout no problem, then all of a sudden he is no longer scan, copy or fax. Notice of default appears in the display.  It will still print computer.  I have reset the printer and you have done everything I know to do.  need help!  Puzzled-1

  My HP Officejet 4500 G510n-z ceased to print certain documents from my computer. It allows to print an e mail but not my bank statement

• driver ethernet controller and Windows 7 Home Premium 64 bit HP 110-3000 pci device driver missing

  I need the driver for ethernet controller and pci for Windows 7 Home Premium 64 bit device driver

  Someone please help

  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04
  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C & REV_01
  PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C
  PCI\VEN_10EC & DEV_5288 & CC_FF0000
  PCI\VEN_10EC & DEV_5288 & CC_FF00

  Hello

  Try the following:

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49600.exe

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48885.exe

  Kind regards

  DP - K

• Windows vista home basic service pack1 and windows vista Home premium service Pack 2

  I WANT TO UPDATE WINDOWS VISTA HOME BASIC, WINDOWS VISTA HOME PREMIUM TO MY NEW LAPTOP TO MY OLD LAPTOP.  Can I update my laptop which has windows vista home basic service pack1 installed using my laptop which has windows vista Home premium service pack 2 by using a transfer program for example windows easy transfer? HOW CAN I DO THIS?

  Hi ronnieVron,

  Your copy of Windows is only allowed for 'a machine If you want to put Vista Edition home premium on your 'old laptop"you can buy a new copy of Vista premium. Another point is that copies of Windows was probably preinstalled on your laptop, which means that, putting license on one side, your copy is related to each specific laptop and so, because the copy is related to the material on each laptop, you would have problems on other transfer machine. Anyway you could invalidate your Windows license.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Try to set up the network between Windows XP Home edition and Windows Vista Home Premium.

  I had a printer connected to a laptop with window vista home premium that I want to share with my other netbook with Windows xp home.

  two computers connected to a network via a router adsl modem to connect to Internet.

  I put the two WORKING groups on the basis of the same name.

  checked XP network places haven't seen vista pc, I had even impossible windows firewall.

  in Vista PC I put the

  ---> private network location

  ---> all in sharing and discovery are enabled

  I had the two PC but still do not see each other.

  So, what should I do?

  Please help, I don't want to move the printer, nor the computers here and there in order to print something from these two pieces, maybe more with different windows in the future...

  Thank you.

  Kind regards

  Michelle

  Hello

  Maybe this can help.
  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot one

  Re just one example. Your list will focus on how your system is configured.

  ** Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Uninstall Vista Home Premium 32 bit and Windows 7 Home Premium 64 Bit installation

  How do I format my C: so that I can install my new WIndows 7 Home Premium 64 bit?  My system is compatible for 64-bit.

  When I try to format C: my system does not allow because of the Vista OS.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  How to do a clean install with Windows 7

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• Key USB and Windows 7 Home premium

  My laptop is running Windows 7 Home Premium.  Bought a new stick of memory: Kingston DT101 G2 16 GB USB2.  When I connect it to the USB port makes it sound, I get a small icon memory stick right background, if I go to devices and printers he recognizes her as a generic "USB 2.0 Data Traveller" and if I take that he recognises that he is gone.  HOWEVER! It came not my thing I can save in. When I look on properties it comes up with three sections:

  Kingston (UMBus enumerator location)

  Kingston Data Traveler 2.0 USB Device (USB Mass Storage Device location)

  USB mass storage device (location Port_ #0001.Hub_ #0008)

  When I right click to browse the files it is shaded on.  within days old (!) I would have changed the drive but I don't seem to be able to do.

  Help, please!

  Connect the player to a Linux machine, open disk utility and reformat the drive in FAT format.  It's crapware on the drive of Kingston and Windows Defender or your antivirus software blocks the function of the training because of the behavior of the crapware.

• More games and Windows 7 Home Premium 64-bit

  Hello Microsoft supports the team.

  I would like to play the older games like Dungeon Keeper2, Tomb Raider2 and Star Wars: the threat ghost on my Windows 7 Home Premium 64-bit. I tried to change the compatibility settings, and it does make a difference. If you could tell me about a good VM to use or something else, I would be gratefull, thank you.

  Kind regards.

  Jacques van Wyk

  For Dungeon Keeper 2, you can follow this guide, it can help.

  For Tomb Raider 2, I think I found something on this site, in any case I do not know if they have solved the problem (I'm Italian and I did not quite understand what they were doing), so try at your own risk.

  For Star Wars: The Phantom Menace tell him guide. (Possibly a 32-bit operating system, too)

  None of these reviews are officially supported and I have not test them, so continue at your own risk.
  Personally, I think that if you're someone who frequently use old video games (video games, you mentioned all have more than 10 years!), it would be more convenient to install Windows XP or at least Windows 7 32-bit (most of old video games was 16-bit: Windows 7 32 bit can handle most 16-bit applications in Windows 7 64 bit cannot) , or (even if it will affect the speed of the game) Windows 98 on a virtual machine (there are a lot of choises: Oracle VirtualBox, VMWare, Microsoft Virtual PC, etc...)

  Hope this helps, spero di essere stato of aiuto.

  Windows7RULES.

• Windows Visa Home Premium functions no longer work after installing Norton System Works.

  • I installed Norton System Works. Almost immediately, I have encountered the following problems:
  • 1. it takes anywhere from 3 to 5 times to use the mouse to block a section for copy/cut.
  • 2 Microsoft Office Professional stops when I open a product and click on the Windows symbol in the upper left corner, rather than give me a drop-down list.
  • 3. when the angle by using Microsoft Outlook and open an email, if I click on the 'x' in the upper right, instead of close the e-mail, he leaves the program.
  • Reinstall Windows Visa Home Premium will solve these issues?
  "Bobby1728" wrote in message news: 7337c24e-0c 57-4919-88b 9 - 49dc21c72196...
  a. I installed Norton System Works. Almost immediately, I met the
  following issues:
  .....
  > g.. Reinstall Windows Visa Home Premium will solve these issues?
  >
   
  Unlikely - but removing Norton might! (followed by a restoration of the system back to)
  before you install)
  NSW is now the most overbloated, more... software again
  invented by Symantec.
   
  Before installing Norton - you made sure that your system is in a
  State to receive? -Uninstalled your old AV and run the removal
  program that is almost always necessary before installing a new AV?
   
  Have you had any problems before you install it? -have you had an asset
  infection before installing it?
   
  --
  Noel
   
   

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC

• Acer 5517 - 'invalid copy' of Windows 7 Home Premium 64 - bit image factory after reinstall

  You just bought an Acer 5517 second hand... the copy of Windows that was top was hacked...
  so I found the image factory saved and reinstalled it..., but Windows gives me an error "invalid copy..."
  the internal key factory should never spoil, right?

  Here are the details... thank you in advance for any help!

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - WJ2H8 - R6B6D-7QJB7
  The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =
  Windows product ID: 00359-OEM-8992687-00006
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {D78683C4-E6D9-4367-9A79-AD8F685CD6F9} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 102
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {D78683C4-E6D9-4367-9A79-AD8F685CD6F9}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-7QJB700359-OEM-8992687-000062S-1-5-21-840722075-3706858346-4016605683Acer Aspire 5517 Acer V1.0820091020000000.000000 + 00012BB3607018400FE04090409Time(GMT-05:00) Standard is03HPQOEMSLIC-MPC102100Microsoft Office home and Student 20071219

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800006-02-1033-7600.0000-0012001
  Installation ID: 009670605843476656541915496230749981225934318134904663
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 7QJB7
  License status: initial grace period
  Time remaining: 43200 minute (30 day (s))
  Remaining Windows rearm count: 2
  Time to trust: 2009-11-06 05:05:33

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Not registered - 0 x 80040154
  The admin service: not registered - 0 x 80040154
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: LgAAAAEAAgABAAEAAAABAAAAAgABAAEA6GFUSD62VPmgHnDSaDI0y/6osNh4qg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC ACRSYS ACRPRDCT
  FACP ACRSYS ACRPRDCT
  HPET ACRSYS ACRPRDCT
  START ACRSYS ACRPRDCT
  MCFG ACRSYS ACRPRDCT
  SLIC SLIC-MPC HPQOEM
  SSDT AMD PowerNow

  I'm afraid that someone will end you in completely in the wrong direction on this. The recovery media is probably completely OK.

  The HP SLIC has absolutely nothing to do with the windows you are trying to install, but stands in the BIOS of the laptop. Someone hacked the BIOS Acer to tell windows antifeatures of piracy which is HP laptop, presumably so that they could use HP media instead. Reinstalling Windows will not fix the BIOS.

  All I can suggest is to download the Acer BIOS update files and try and install one to replace the SLIC entry. There is however 2 caveats to that. 1stly that the damaged area is not always included in the files to update the standard BIOS, so if you can run a BIOS update may not solve the problem. 2ndly some BIOS update programs you cannot install an older than the currently installed BIOS and one that fits in a first time (because it can be complete) would be the version original factory.

  It's not all just Microsoft to blame for this issue when it was caused by someone trying to circumvent the measures to combat software piracy that any developer has the right to use. As said from your description that it is only a problem due to fraudulent activity.

  Also when you are communicating on this forum you're not dealing with Microsoft, all the people here are voluntary and have no direct involvement with Microsoft to help posters like you.