Re-install the software antivirus Norton of HP_RECOVERY?

I just got my new CPU 8 h8z office.  I didn't know that it comes with 15 months of Norton antivirus.  I thought that Norton would be a trial of 30 days so I "uninstalled" because the window was annoying whenever I turned on the machine.  Now I look on my invoice and I see that I get "Norton Internet Security (TM) 2012 - 15 months", however, since I uninstalled it, I don't see a way to enable it now.  I don't want to do a system restore to a previous checkpoint, since I install all my new applications.  Is it possible to reinstall Norton Disk "HP_RECOVERY" or by going to the site Web of Norton (but I don't know any serial number necessary to install software)?

Thanks for the tips!

Peter J. Macay

Hello

Try the HP recovery under the Start button Manager and all re - install individual program.

Recovery Manager---> reinstall the software program

Norton Internet Security is a software OEM and will activate automatically.

Tags: HP Desktops

Similar Questions

  • Cannot install addon off-site because "Firefox prevented this site asking you to install the software on your computer.

    I try to install GMail Watcher by Sonthakit. It is hosted off site here: https://sites.google.com/site/sonthakit/gmailwatcher

    Whenever I try to install the addon by clicking on 'Install the free', Firefox tells me "Firefox prevented this site asking you to install the software on your computer" and does not give me an option to ignore the warning and install it anyway. I clicked on the padlock icon in the address bar and activated all the appropriate permissions, but it will not yet let me install the addon even after restarting Firefox. I have just reset Firefox and use the latest version.

    How can I say grass and let me install the Firefox addon?

    This is because the part of the page button is loaded into an iframe, as you can see if you click on the button install free
    You get only the button allow if this button is located in the home page and not when the button is in an iframe.
    One solution is to open this image in a new tab by right clicking the button.

  • DeskJet 3632: Installing the software with the IPad

    Hi all, I just bought a deskjet 3632, I do not have a PC or laptop, so I can't install the software on the disk.

    I have an iPad,

    Please could you guide me through the steps of the installation (if possible) I've done a major boo boo, I bought the HP1512, not even give it a second thought that it would not be wireless.

    Thanks in advance

    Kee

    Hi kee,.

    Download and use the HP AiO Printer application to set up your printer on your wireless network If you have router:

    http://support.HP.com/RS-en/document/c03561640

    Open the app and click Add a new printer, and then follow the instructions on the screen.

    Note: f you can't find the name of the printer with the "setup" from the list of WiFi from your iPad, reset the printer settings by pressing on and now the buttons cancel and wireless on your printer for 3 seconds, then turn on the printer and make sure the WiFi switch on the printer flashes, otherwise press the WiFi button, and it starts flashing.

    Then follow the steps in the article to print and scan, so you can use AirPrint to print from your iPad:

    http://support.HP.com/us-en/document/c02623193

    If you have a router, connect directly to the printer using WiFi Direct, as shown below:

    http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-4510-e-all-in-one-printer-series/5285997/model/5383027/document/c04090221/

    If you need to find the WiFi Direct password, press the Information (i) and the WiFi Direct () buttons to print a sheet with WiFi Direct name and the password, the same steps apply to print using AirPrint and scan using HP AIO remote.

    Kind regards

    Shlomi

  • Re - install the software for the printer C6280 all in one... get a "file not found" error message

    you need to reinstall the software for the printer c6280 all-in-one. Downloaded the last installation on HP web site package. During the installation process I get an error message... Unable to find user/appdata/local/temp/7z256315/setup/...setup/blocksysuser...

    the 7z256315 folder does not exist on the hard disk.

    I also have a message that it cannot find PS_A10_02_software.msi.

    Windows 7, C6280 printer all-in-one. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via the wireless to the router.

    I hope you can help

    Thank you

    Charlie

    Hi cberistain,

    Follow the steps below and let me know what happens?

    First step: clear temp directory

    1. Type %temp% term or search programs and files of field
    2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
    3. Proceed to step 2 below

    Second step: downloaded and extracted to your system:

    1 download the drivers and full software features

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77039-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 3645097 & sw_lang=.

    2. once the download is complete, double-click the file to extract the software.

    3. when the installation window opens, press the Cancel button to stop the installation

    4. tap folder in the race or search programs and files of field

    5. Locate and open the folder starting with 7z (example: 7zS2356)

    6. right click on the folder and select copy

    7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

    8 open the 7z, that you just copied on your desktop

    9 open the Util folder

    10 open the CCC folder

    11 start the uninstall_L4

    12. once the uninstall is complete, restart the computer

    13. run disk cleanup from the tools Accessories\ system under all programs folder

    14. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

    Let me know if you are able to successfully install the software and driver and are able to print and scan?

  • Satellite U400-15B - rights no Admin to install the software

    Hi there, hope you can help with an annoying problem.

    I recently bought my U400-15B and I am the only user of it.

    I recently tried to download software on CD-Rom, but I get a message every time I must have administrator rights to install the software and to log on as an administrator to do.
    I checked my account configuration and user that clearly states that I am the administrator!

    If anyone knows what this is please help.

    Thank you very much in anticipation.

    R1

    Hello

    If you want to run the exe file but has no authorization, then I recommend you to right-click this file and choose Run as administrator.
    This should help to start the installation procedure.

    Good bye

  • How to install the software VPN 3rd party to R700?

    I'm trying to find a way to install the software VPN 3rd party to my router? NordVPN. I'm not sure how to proceed. Any advice?

    Griff

    No 3rd party software installs with stock firmware.

  • Impossible to install the software in Support of Boot Camp

    Hello

    I try to install Windows 10 on my iMac, but I have some problems with Boot Camp. Boot Camp support support software but cannot install it on the Flash drive. I tried different Flash Drives, but it still doesn't work. On the screen it says "Unable to install the software.". Someone has an idea?

    Wishes of the Germany

    Snapsterism

    In BC Wizard, if you select only the option to download the software, can it be written to your USB key? Is the USB, USB2 flash drive?

  • Trouble installing the software and the driver for Office Jet Pro 8600

    I get error that "additional software is necessary to continue' when I try to install the software and drivers for my wireless printer Office Jet Pro 8600. I just got a new laptop and had at first no parameter problem the printer and it prints fine, but now for some reason it is not print at all. I tried to restart my laptop and printer several times, but it keeps saying printer offline even if it is connected to my wireless. I followed the recommendation of an assignment that suggests to abolish the printer and reinstall, which is where I am now. Now, I can not install this printer at all by the above error message. Help, please!

    Thank you!

    Hi HSchulz,

    When you try to install with the CD, try installing the latest Windows 7 driver from the HP website. Restart the computer, turn off the printer, then reboot your router and then launch the installation. Here is a direct link to the driver file:

    http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

    Select the connection Wireless option during installation to get the printer on the network and associated with the laptop. Let me know if this helped at all...

    I work on behalf of HP.

  • Try to install the software on target RT PXI 1082

    Hello

    I try to run a chassis PXI-1082 (recovered with factory settings), but I have some problems when I try to install softawre through NOR-MAX on it from another PC connected with the ethernet cable.

    First of all, I saw a PXI chassis BIOS problem when I started PXI chassis in RT mode: "ph_exec.exe is missing". PXI chassis started in SafeMode to RT.

    Secondly, I detected correctly chassis with MAX on PC with the correct IP address but when I tried to install the software on it, an error message resembles what occurred: ' no more space in the hard disk or input output error occurred. " I think that there is a consequence to the previous "ph_exec.exe is missing" message

    Could you please help me for this disorder?

    Thank you.

    ARM

    Hi Alexis,.

    Thanks for your reply. I am not able to open your link, but I found a solution on site OR: «Dual-boot Windows and Labview RT on a PXI controller»

    My problem is that my hard drive on the PXI controller is configured in NTFS mode and no partition in FAT32 mode existed. The reason why my PC says "no more space available" because it seemed to drive FAT32 partition. I am surprised that NEITHER do not included the partition FAT32 for RT. I've probably missed something. In any case, it seems to work fine now with disc FAT32 partition.

    I install the software on my lens PXI know.

    Thank you

    BR

    Vincent.

  • Installing the software on cRIO for Application of Vision

    Hello people, OR

    I'm working on a vision cRIO-9082 real-time application that uses. I installed Labview Professional 2011 on my host (default Installation) and configured my cRIO in MAX.  The most recent site NI OR-RIO 12.0.1 pilots were intalled on my cRIO.

    I decided to start dumping a small application on my cRIO as suggested in the document below

    http://www.NI.com/white-paper/10867/en#toc2

    through this document, as shown in step 2, I do not have Born no matter what server OR-IMAQ or NOR-IMAQdx RT on my cRIO. I called SUPPORT and they advised to reinstall the development vision with custom module by selecting these two drivers. But during the installation I found no option to select these determinants of the RT.

    Are these drivers for real-time vision applications are already included in my NOR-RIO 12.0.1 or do I still need to install separately? I did not camera ethernet at the moment to check if crio works or not. In the license manager I see LabVIEW RT is installed and enabled

    My cRIO is ready for dumping a program and vision applications?

    Host: LabVIEW Professional 2011 SP1 development system

    Target: cRIO-9082 with NOR-RIO 12.0.1

    Concerning

    Neo

    Yes, that's what I thought.

    You have the recommended software stack (RSS) installed - you will see the mention of "modules" when using an RSS feed.  You must perform a custom installation that the document you specified.  When you go to install the software in MAX, on the FIRST SCREEN EVERYTHING (after the launch of the software installation wizard), you are presented with a number of options - you probably just click on ' NI RIO 12.0 - November 2012 "by default because it has a Ribbon of gold next to him.  Don't, don't.  Click on "custom software".  You will get then a word of setting warning something like: ' don't do that if you know what you are doing "-If you don't get the warning, you know that you are not right.

    Once you cross, LabVIEW Real-time and so on probably will be selected (as you have installed an RSS feed), but the options of your choice (that is, the components of the Vision) will be visible.

    -Danny

  • Impossible to install the software for printer AIO C6250

    Whenever I try to install the software for my printer C6250, I get an error message saying "unable to find a specific file" the file is C:\Users\DrAnth-1\Appdata\Local\Temp\7zS5FBE\setup\... \blocksysus.

    I can't find this file on my computer.  The installation stops and I'm back where I started.

    Can someone help me?

    Tony, you updated to Vista? To run the cleaning brush to make sure that we get rid of everything left on the software. Heres how:

    Of the Original installation CD:
    1. Insert the CD in the drive and then cancel Setup
    2. open my computer and click right then on the CD from the drive and select open
    3 open the Util folder
    4 open the CCC folder
    5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
    6. once the uninstall is complete, restart the computer
    7 run the Accessories\ System Tools Disk Cleanup
    8. download and install the latest version of Adobe flash player
    http://www.Adobe.com/support/flashplayer/downloads.html
    9 download drivers and full software features
    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76043-1&cc=us&DLC=en&LC=en&OS=4063&product=3308554&sw_lang=
    10. run the download to reinstall the printer

    If the software has been downloaded and extracted to your system:
    1. type % temp % in the field of race
    2. Locate and open the folder starting with 7z (example: 7zS2356)
    3 open the Util folder
    4 open the CCC folder
    5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
    6. once the uninstall is complete, restart the computer
    7 run the Accessories\ System Tools Disk Cleanup
    8. download and install the latest version of Adobe flash player
    http://www.Adobe.com/support/flashplayer/downloads.html
    9 download drivers and full software features
    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76043-1&cc=us&DLC=en&LC=en&OS=4063&product=3308554&sw_lang=
    10. run the download to reinstall the printer

    Let me know if this solved your problem.

    Thank you!

    Sean

  • Photosmart C4585 impossible to install the software

    I bought a C4585 recently and when trying to install the software on the cd it comes up with a fatal error and wont install, I downloaded the software on the site and still the same problem? I'm running 32-bit vista on a computer compaq laptop so he thought would have worked without problem? Any ideas?

    Hello

    troubleshooting steps:
    Can write you pls the exact error message to find out what the steps right troubleshoting we can give you, I thank you

    You can also try this, if all goes well, it can help

    1. pls. Insert the cd driver for hp
    2. open computer
    3. right click the hp dvd icon and choose explore
    4 Select the util folder
    5 Select the folder of ccc
    6. find uninstall l1 and double-click
    = you will see a DOS window and a window cleaning, pls press continue or enter the base on the statement.
    7.pls. to uninstall l2 and l3 with the same process and uninstall steps
    8 restart the computer
    9 install the software again

  • Want 4524: Impossible to install the software

    Hello

    I recently acquired the HP Envy 4524 printer, I have set up on my WiFi network and printed from my iPhone and iPad with AirPrint and even printed my Mac using the printer set up as a printer AirPrint.  I would like to install the driver of HP printer with the HP Easy Scan software so I am able to scan and have more control over the printer that I can with AirPrint.

    I tried to use the HP Easy Start software, but it was not easy at all.  I went through the process and everything was good until I got to the part "Download and install the software" installation and I get a message saying "unable to install the software.  Try again later. »

    Is it a temporary problem at the end of HP?

    Thank you

    Fred.

    Hi @JZjr,

    Welcome to the HP Forums!

    I see that you have trouble to install your HP Envy 4524 on Mac OS X 10.11 El Capitan. I'm happy to help you!

    For this printer, there is no full feature software and drivers directly from HP for Mac OS X 10.11 El Capitan. This printer can use the built-in driver directly from Apple, which is installed by using the Apple update. According to this document, OS X v10.11 v10.10 compatible printers.

    I recommend you to go through this guide, installation of a printer Mac driver by using Apple Software Update. Or, if you need to download the driver manually, you can do it on this website, HP v3.1 for OS X printer drivers.

    Then you scan using one of the methods in this post, Re: iMac OS X 10.9.3 Scan for iMac driver for HP OfficeJet Pro 8500 a A910a does not appear to be, by my colleague @Sunshyn2005. (These options works with this printer on Mac OS X 10.11 El Capitan).

    If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    Hope this information is useful and thanks for posting!

  • DYMO cardscan62, do not have the cd, need the serial number to install the software.

    I have a cardscan62 dymo, not the CD, need the serial number to install the software.

    Hello

    Contact technical support for Dymo

    http://global.DYMO.com/enHK/HOWTO/CardScan_62.html

  • I installed the software recommended by Microsoft and my printer is not working as it says lxdncoms.exe and lxdrwbgw.exe of the printer driver have been blocked. What should I do?

    I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked.  How to unlock.  Computer is a Dell and printer is a Lexmark.

    Monday, October 15, 2012 05:17:39 + 0000, joyferg wrote:

    The game, October 11, 2012 20:43:14 + 0000, joyferg wrote:

    I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked.  How to unlock.  Computer is a Dell and printer is a Lexmark.

    What exactly is the software that you have installed?

    Ken Blake, Microsoft MVP

    The software is called RegWork.  I had to pay for it.  It is not yet enabled.  It seems to be just a type of utility to clean my system scan.  Since it was recommended by Microsoft Security Essentials, I thought it was the right thing to do.
    Should I continue to carry out this activation or should I unstall it.

    What makes you think that Microsoft Security Essentials recommended
    It? That cannot be good.

    You must uninstall it. Registry cleaning programs are all snake
    oil. The registry cleaning is not necessary and dangerous. Leave the
    Only registry and do not use any registry cleaner. Despite what a lot
    people think, and try to which suppliers of software record cleaning
    convince you to have used really doesn't hurt registry entries
    you.

    The risk of a serious problem caused by a registry cleaner by mistake
    delete an entry you need is much greater than any potential benefit
    It can have.

    Read http://www.edbott.com/weblog/archives/000643.html
    and http://aumha.net/viewtopic.php?t=28099
    and also
    http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

    Let me stress that neither me nor anyone else who warns the
    use of registry cleaners never said that they always cause
    problems. If they have always caused problems, they would disappear from
    the market almost immediately. Many people have used a registry
    cleaner and never had a problem with it.

    The problem with a registry cleaner is that it carries with it
    the risk of a significant problem. And since there is no
    benefits of using a registry cleaner, running that risk is a very bad
    good deal.
    Ken Blake, Microsoft MVP

Maybe you are looking for