Re install windows 7 using a flash drive on a new hard drive

I have an acer aspire one NET accountant comes with windows 7 Home premium preloaded in it. But my hard drive crashed and does not connect when I start the computer. It shows the PXE M0F message. After some research, I discovered that I need to replace the hard drive. But my warranty is over and so I can't send it. I advanced and bought a new hard drive and decided to install it myself. But the problem is that I don't know how to install the operating system on the new hard drive. I was wondering if there is a way I can use the serial number on my cell phone to activate windows. And if I can't then where can I get an iso image to a flash drive boot?

Download Windows 7 proper. ISO file (must match for your product key version)

Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso

Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso

How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

After you download the correct .iso file use ImgBurn or ISO gear to create a bootable DVD or instructions below for a bootable USB key.

= USB Installation =.

Windows 7 USB/DVD download tool:
http://store.Microsoft.com/help/ISO-tool

Create a bootable USB:
http://arstechnica.com/business/2009/12/the-USB-flash-drive/

Install Windows 7 from USB drive/key:
1) http://www.maximumpc.com/article/howtos/how_to_install_windows_7_beta_a_usb_key:
( http://www.windowsvalley.com/blog/install-windows-vista-and-windows-7-using-bootable-usb-storage-device/ 2)
( http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/ 3)
4) http://technet.microsoft.com/en-us/magazine/dd535816.aspx

How to create and make Bootable in Windows 7 ISO from EXE Plus Setup1.Box and setup2. Box:
http://www.mydigitallife.info/2009/10/23/how-to-create-and-make-bootable-Windows-7-ISO-from-exe-plus-Setup1-box-and-setup2-box-files/

Also: A quick way to get your Windows 7 into a bootable DVD:
(This guide is for people using the upgraded version of the students, composed of)
Setup1.box, Setup2.box and Win7-P-Retail-en-us-x64)
http://www.TomsHardware.com/Forum/1392-63-Windows-upgrade-bootable-guide-having-issues

How to install Windows 7 from a USB stick without DVD ISO of Windows 7:
http://www.Blogsdna.com/2016/how-to-install-Windows-7-from-USB-drive-without-Windows-7-ISO-DVD.htm

How to install Windows 7 from a Flash drive with XP or Vista:
http://www.legitreviews.com/article/1031/2/

Use a USB key to install Windows 7 - even on a Netbook:
http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

Cannot install Windows 7 error USB "Setup could not create a new partition system:
http://social.answers.Microsoft.com/forums/en/w7install/thread/4b3c0430-9E41-47F6-b1cd-aed55fea7dad

= Create an Installation DVD media =.

Create a Windows 7 Bootable DVD using the. ISO file
Engraving of a file of Windows 7 ISO on a DVD
http://support.Microsoft.com/default.aspx/KB/977640

ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
It supports a wide range of image file formats, and it's free.
(BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
http://www.ImgBurn.com/

Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
(Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

====================== Keyless Install ================================

How to make a 'Keyless Install"of Windows:

Boot from the Windows 7 DVD disc, you create and launch the installation.

After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

You now have a 30-day grace period to activate Windows.

During this 30-day grace period you can try to solve your problems.
After you are satisfied with all the problems have been resovled then activate Windows.

====================== Device Drivers =================================

Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

Graphics/video drivers:
Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

= How to activate Windows 7 by Internet =.

1) click Start and in the search for box type: activate
2) click on the 'Activate Windows' option at the top of the list
3) click on "now, activate Windows online.
(4) enter your 25-character product key (not case sensitive)
5) click "Next" and wait for the key must be verified.

Another method - to reach a real person:
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.

Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)

The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048

J W Stuart: http://www.pagestart.com

Tags: Windows

Similar Questions

  • How to install Windows XP using USB Flash Drive in Windows 7?

    I m windows 7 and want to install windows xp, how to install windows xp using a usb flash drive. I have the iso file from xp.

    Hello

    The Microsoft Windows 7 USB/DVD download tool is designed for the installation of Windows 7, is not for the installation of XP.

    I suggest that you use Google that Microsoft does not support what you want to do.

    http://www.computerhope.com/issues/ch001366.htm

    ______________________________________________

    As you have the ISO file, make a record with him:

    https://NeoSmart.NET/wiki/Burning-ISO-images-with-ImgBurn/

    See you soon.

  • Envy 13 d001ne: cannot install Windows 10 from usb flash drive

    Summary of the problem:

    The laptop SSD has a GPT format. I am trying to insall a Windows 10 ISO I have on it from a flash drive. Formatting a usb startup as TPG manually or using Rufus drive will not make the unit visible non-traditional mode. Formatting the drive in the MBR on the other hand I cannot install on a GPT disk.

    I've tried everything. I disabled and enabled secure boot. I updated the BIOS to the latest revision F.35.

    What's wrong?

    The ISO had problems with it. I used another and then I could install Linux Mint and Windows without any problem.

    I solved my problem here.

  • Trying to create a bootable Windows 7 x 64 Flash drive. Get the "invalid MS-DOS function" error message when you try to copy the file 'bootsect.exe.mui' of the Windows ISO on Flash drive

    The title pretty much everything said.  I have an installer the ISO of Windows 7 Professional x 64.  I am trying to create a bootable flash drive using these instructions:

    http://www.OSNews.com/story/20795/Installing_Windows_7_on_the_Aspire_One_or_Any_Other_Netbook

    I followed all the steps in the guide without problem.  Windows Explorer shows the drive is NTFS.  I can copy all other files of ISO on the FlashDrive without problem.  Only, I can't copy this file.  I tried to copy it to my hard drive rather than on the flash drive, and it still does not work.

    I tried to create a file with the same name by using Notepad to see if there was a problem with the file name.  I can copy this file on my hard drive flash drive, but I can't always copy the ISO file.

    I am running Windows 7 Home Premium x 64 edition and using a Corsair Flash Voyager 16 GB flash drive.

    Help, please!

    Download Windows 7 USB/DVD tool
    http://store.Microsoft.com/help/ISO-tool

    Create a bootable USB:
    http://www.victorchen.info/create-a-bootable-USB-memory-stick/

    Install Windows 7 from USB drive/key
    http://www.MaximumPC.com/article/HOWTOs/how_to_install_windows_7_beta_a_usb_key
    http://www.windowsvalley.com/blog/install-Windows-Vista-and-Windows-7-using-bootable-USB-storage-device/
    http://www.intowindows.com/how-to-install-Windows-7vista-from-USB-drive-detailed-100-working-Guide/
    http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

    How to install Windows 7 from a USB drive without Windows 7 ISO DVD
    http://www.Blogsdna.com/2016/how-to-install-Windows-7-from-USB-drive-without-Windows-7-ISO-DVD.htm

    How to install Windows 7 from a Flash drive with XP or Vista:
    http://www.legitreviews.com/article/1031/2/

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • How to use a flash drive for HP Pavilion p6331 with Windows Vista for backup worki?

    Hello

    While I have a master's degree, my know-how is written the text, does not not with the computer functions that are new to me.  Whenever I try to my backup job, the default setting of my Media Smart desktop assumes that my files will be sent to some separate, newly purchased drive, drive E.  However, I don't have any drive E!  I bought some DVDs but they keep rejected and cannot be written above.  Seems cheaper solution was to buy a flash drive.  I tried to save, but the menu showed that drive new E or "insert DVD."  What I need to know where/how is insert (front of the back of the Tower?) flash player and the "selection" of this option.  Do I need to buy a special cable to connect this small Lexar Flash drive, 16 GB?

    Thanks for all the words of wisdom.

    Hello leathergirl. I checked the model number on the HP website and did not find a system with this model you listed.

    You can see the card reader in the E: drive when you try to back up your data.

    You should be able to navigate to any location (by car) which is able to accept data during backups. I don't recommend that you use the backup but just Windows copy and paste all data, such as documents, pictures, music, etc..

    Unless you use DVD +/-RW disc, the DVD disc can have that data written (burned) to them once. DVD +/-RW can be rewritten several times before becoming defective.

    The Lexar 16 GB Flash drive USB should be inserted into the USB port on the front and then recognized by the operating system and drivers must be installed by the operating system.

    You should be able to copy and paste your data to the Lexar FlashDrive using Windows Explorer. Lexar Flash drive must be placed in the list of drives on the left side of the screen when using Windows Explorer.

  • Upgrade of Windows 8 Blurry\Fuzzy Pro install dvd screen and a flash drive.

    Upgrade of Windows 8 Blurry\Fuzzy Pro install dvd screen and a flash drive. Each screen is blurred during the installation. Managed to get

    It is installed. A great until I had to reboot after the installation of windows updates. It starts with the first good looking for Windows 8 logo then

    the monitor turns off and the computer is still running. Reset and I get the windows repair screen. Sometimes, his clear and sometimes

    its blur. I have a motherboard Asus M2N with a Nvidia geforce GT 240 video card. I'm guessing that the windows install 8 pro and pre of initialization

    use some funky video drivers before windows loads the correct nvidia drivers. Microsoft needs to do a better install disc that allows to display the

    graphics correctly. Windows8-UpgradeAssistan does not really check very good material. I ran the windows 8 developer preview and it

    had no problem. Y at - it a hope?

    Hi SteveSimmons,

    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

    I suggest you install the latest drivers from Nvidia geforce GT 240 for Windows 8 from the link below video card:

    http://www.nvidia.com/download/index.aspx?lang=en-us&ptid=1&PSID=52&PID=0

    I hope that the information above helps you.

  • Windows 8 recovery Usb Flash Drive can do factory setting?

    Hello world

    I created a windows usb 8 recovery flash drive using HP Recovery Manager software, so my question is that, not USB can do by default from my laptop.

    Thank you

    MUHAMMAD Asif Qadri Qasim

    Yes, fine, if you select all start again without saving anything, it will be...

  • What is a Windows 8 certified USB flash drive?

    I just bought my 3rd USB flash drive in the hope of being able to copy my recovery image. My computer would not use the first two I tried all ports USB 4 - port 2.0 and 3.0. This time, I bought a HP flash drive who said that she supports Windows 8. I understand that I should not use a Windows 8 certified USB flash drive. Before I open this disc, I want to know if it's a. If so, I will return it not open - unlike the first two I tried.

    The States of package under requirements that Windows 8 is one of the necessary systems. For me, this does not mean that it is certified for Windows 8. Am I wrong?

    Computer: HP 500 - a60. 8.1 Windows (x 64)

    Hello

    Your question has not been answered by Erico on one of your other posts?

    If a piece of equipment is certified MS then it should be presented to MS for certification.  Some USB flash drives are marked on the package compatible with Windows 8, but this does not mean that the particular flash drive is "certified."

    There is to many, many USB flash drives that work with Windows 8. Some have argued that, if the USB flash drive as a 'removable' device, so it should work with the HP Recovery Media Creator.  However, I recently discovered that one of flash USB 2 (team F108 64 G) drives that I is not set up as a 'removable device' when you open my ThisPc (myPC) and it works perfectly for me.

  • I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number?

    I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number? I have sony laptop.

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    http://eSupport.Sony.com/

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Mick Murphy - Microsoft partner

  • using a flash drive

    How to install my program of office of a computer to another computer using a flash driver.

    Copy the installation media of the entire desktop on a flash drive.

    Insert the flash drive in the computer on which you want office...

    Open it to "file view"...

    Click Setup...

  • After installing windows optionally updated my display driver is the cause of problems

    I have DELL Inspiron 14 with windows 7 home preium

    After installing windows optionally updated my display driver is the cause of problems
    Ran troubleshooting it says "material changes could not have been detected.
    Help, please
    Thank you

    Use the function "restore" to restore your system to a point before installing optional updates in windows.

    After that, go to Windows Update and 'hide' the update that caused the problem.

  • How to use a flash drive to download mods and expansion packs to an Xbox 360?

    This question is perhaps out of bounds for this site, but as MS I thought I would give it a shot. Laughing out loud

    I tried for a while to use a flash drive to download mods and to my games on my 360 expansion packs. However, I can't make it work. According to the website of XBOX 360, it can be done, but after following the instructions, I had no chance.

    Anyone have any ideas here?

    Thank you

    PS My cable company does not offer a wireless right now modem to install XBOX Live.

    Hi southerngent (2),

    Thanks for posting in the Microsoft community!

    What steps did you follow?

    If you haven't tried these links you can check:

    I suggest you to visit the links below and check if it helps.

    Use the Xbox 360 hard drive transfer cable

    http://support.Xbox.com/en-us/Xbox-360/accessories/set-up-transfer-cable

    Support for the Xbox 360 USB flash drive

    http://support.Xbox.com/en-us/Xbox-360/accessories/USB-flash-drive

    You can also contact Xbox support.

    http://support.Xbox.com/en-us/Games/PC-games/game-support

    Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

    We can't wait to hear back on your part.

  • Install a program from a flash drive in Vista?

    How to install a program from a flash drive, downloaded from the old system of XP on Vista?

    If you literally just copied the program files, then paste it into the program on vista files and try to run it. It may not work because he might miss the registry keys, that he needs, but if she didn't absolutely need these keys to run, it will probably work very well.

  • How long will take to perform a backup in Vista? And if I use a flash drive?

    I'm doing a back up on my laptop for the first time. I want to know how long does take to make it complete? and can I use a flash drive to put it on the back

    * original title - I need help *.

    I'm doing a back up on my laptop for the first time. I want to know how long does take to make it complete? and can I use a flash drive to put it on the back

    Yes, you can use a flash drive.

    It is conventional to use an external hard drive. Mine has a capacity of 1 TB of sub Canandian $100.

    As for how long, it varies. Depends on the amount of files to back up.

    I think that the first time I did it was an hour.

    The next backup would be shorter because he'll be increment backup... just save those who are new.

  • Load Windows Mail on a Flash drive

    What are the step by step instructions to download emails to Windows Mail to a Flash drive? -I'm not a user of advanced computing.

    See also here for the details of the Organization of store message (www.oehelp.com/backup.aspx#wm).  If you want to keep the settings, you must also back up the registry keys.

    Steve

Maybe you are looking for