Re: Installed update the BIOS for my Pro Satellite L300D and now screen does not work

Hello

I installed the update of the BIOS 3 days ago, I had a few programs that are open at the time and also an external USB mouse in time. The hard drive crashed and then blacked out, but the power was still on the turbine runs at full skin. I tried to turn off the computer by the power button, but it wouldn't, so I let it run out of battery. Since then, the computer seems to turn on but the screen has been blackened since then, I can't see what the State of the hard drive is in.

Any ideas?

Hello!

Oh dude, it looks like that your ROM module is damged due to a defective BIOS update :(

A BIOS update should normally * do not get with the implementation of substantive programmes (also antivirus). I think that's the reason why the n t successfully update.

However, you can do nothing. You will need help from a technician for laptop that can try to reflash the ROM module On the Toshiba page, you can search an ASP:
http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

Good bye

Tags: Toshiba

Similar Questions

  • Windows store tells me that Revel is installed on my PC for Windows 8.1. Even if it does not work on my iPad, there is no sign of it on the PC. I can't connect to the PC.

    Windows store tells me that Revel is installed on my PC for Windows 8.1. Even if it does not work on my iPad, there is no sign of it on the PC. I can't connect to the PC.

    I can not uninstall revel and reinstall it because I can not find it and because Windows store says it is already installed.

    Hoping someone can help.

    Hi JRSJS,

    Windows 8.1 makes it easy to find installed apps! Here is a link that can help you:

    Tip Windows 8.1: Find your installed applications. Windows 8 content SuperSite for Windows

    You can find this link also somewhat useful:

    http://www.fixedbyvonnie.com/2013/12/where-are-apps-in-the-Windows-store-installed/

    I hope this helps!

    Glenyse

  • updated my driver for my Ethernet controller and now it does not work

    Original title:

    Network network network Ethernet device

    I updated my driver for my Ethernet controller and now it does not work... I can't put it up, are the only choices that I
    to establish a wireless connection or set up a broadband connection using a user name and password but my ISP does not require
    a kind it will not accomplish the connection in place, I use win 7 64, how do I fix this so I can use my connection ethernet again?

    Hello

    You can try the following steps and check if it works:

    Method 1:

    You can restore to an earlier device driver if you are having problems with your computer or device after upgrading the driver.

    Restore a driver with its previous version

    http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

    Method 2:

    If the steps above fail then you can perform a System Restore to an earlier point when it was working fine.

    It will be useful.

  • My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

    My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

    I hope this will help:

    Error 213:19 | Problem is the license for this product

  • My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

    My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

    Right-click on the header at the top of the list of messages and select from the list of options.

  • ProBook G3 450: I've updated the bios on my g3 Probook 450 and now potrs usb do not work

    I've updated the bios and after restarting the pc no usb port work and the usb serial bus is not listed in Device Manager. I have not received any error.

    Hi Richrob,

    Usually after the BIOS updates I recommend restoring the default BIOS because some parameters may change or managed power States must be refreshed. If you start at the F10 menu there will be a restoration of the default BIOS on the home page.

    If the USB bus does not return to the top after restoring default values, try to reinstall the USB driver. You can find the latest version for Windows 7 here.

  • MiFi will not work unless that plugged into the computer... Verizon no help at all it explains a vista problem... He used to work, but I think that an update did something to it and now it does not work...

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: hours on the phone with verizon... nothing is ready to throw the Verizon mifi and go to TMobile... forums looking for answers but not help there... seems a lot of people have this problem... someone at - it help him?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    A Beyschau of Annette

    Hello

    Quote: ' MiFi will not work unless plugged in to the computer.

    Where it has been plugged in before?

    If you are using to connect via Wireless, then it might be that your wireless connection has a problem.

    ----------------------------

    Wi - Fi in general.

    These steps and tell us where is the breaking point.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    ------------------

    The wireless card drivers much also install utility wireless of the seller.

    Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

    ----------------

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

    If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    party like Hello and NetMagic 3rd network managers can block local traffic too.

    ---------------------------

    Stack TCP/IP work should look like.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    http://www.ezlan.NET/Win7/status-NIC.jpg

    Description is the data of the card making.

    The physical address is MAC of the card number.

    The xx must be a number between 0 and 255 (all xx even number).

    YY should be between 0 and 255

    ZZ should be between 0 and 255 (zz all the same number.)

    The date of the lease must be valid at the present time.

    * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

    * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

    ---------------------------------------------------

    A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

    Above everything is OK, you must be able to connect to the router.

    Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

    If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

    Enable security wireless after you eat to make a functional connection.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • My Norton anti-virus software used to work and now it does not work with the new Firefox update. This corrected soon? Otherwise, I will not use the product

    Since your last update that my Norton toolbar will not work... If it does not work, will not use your product. Can it be fixed quickly?

    According to the article, I linked to before, you will need to update the norton version 2015.2.1.13 toolbar that is compatible.

  • I updated the firmware of my as30v and now it does not work

    It's my problem.
    In my computer, the update was completed suceffully, but then my actioncam it does not work.
    I removed the battery and nothing to do.
    The screen is off and the rec light still works.
    No information on the screen, no response. I tried to remove the time of one and an another battery. The red light is still in mode on. If I connect with the computer, nothing happened.

    Died?, but why!

    Your device is in integrated security mode / download.

    Go through the process of updating the firmware again. What operating system do you use?

    Repeat and follow this guide:

    http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=HDRAS30V&upd_id=9893&os_group_id=23

  • Installed at the factory of HP PCI USB3.0 ports H8 - 1080t does not work


    Resovled: The other end of the internal beam of the son la carte (who is buried in a mass of other sons beam), has been physically disconnected from the beam current decision-making.  Must of slipped off during shipping.  It should implement the lock, but it does not work.  I have locked in place with a wire tie.  I shouldn't of assumed it was connected.

  • update 10.9.3 Mavericks and now scrolling does not work in Firefox.

    I've updated yesterday, and now the wheel on my mouse (optical mouse Belkin) does not work in Firefox. It works everywhere else, but not in Firefox.

    Can scroll you with the keyboard?

    On Mac, scroll bars may be hidden and are showing them when you scroll down the page, so you can see the current scroll position.
    The idea is that a Tablet is used that does not need to be visible and therefore more screen real estate for the navigation area, scroll bars.
    You can make scroll bars always appear:

    • System Preferences > General > display the scroll bar > choose "always."

    Note that on Mac you can turn on or off the mode full screen with command + SHIFT + F.

  • Help! I've updated Firefox to version 20.0 on my Imac, and now UX does not work. What's wrong? What can I do about it?

    With the new version 20.0 UX does not work, how can I me personas to work?

    Make sure that you are not Firefox running in (permanent) private browsing mode.

    • Firefox > Preferences > privacy > Firefox will be: "use the custom settings for history".
    • Uncheck the box: [] "always use the navigation mode private.

    If you switch to private browsing and then a special built-in character is applied to disable the theme so it is impossible to use other characters.

  • I recently installed Windows 7 Home Premium (x 64) on my HP Pavilion DV6 laptop and now Aero does not work!

    It is all opaque and I'm trying to install the Intel graphics drivers and Nvidia graphics will not work!

    What I'm doing! She also does not connect to the internet, the sound does not work and I cannot adjust the brightness of the screen.

    Should I try Windows 7 Ultimate? (My PC is recorded, not mobile phone).
    I will provide you more details if you need.

    Hello

    Please review these links and see if the problem is resolved.

    Open the Aero Troubleshooter

    Please visit this link and check if the hardware and software requirements are met.

    What is the Aero visual experience?

    Please get back to us with the State of the question.

  • I recently updated my iPhone to iOS 9.3 6s and now my data and wifi are in place. Now I can't open the apps and send messages with data and barely on the wifi. I've tried everything, and it still does not work.

    I updated my iPhone to iOS 9.3 6s today and now my data and wifi are in place. Whenever I try to open an app or send text messages with data it does not at all. And with wifi, it just works. I tried just like turn roaming off and off and other lte but nothing seems to work at all. Can someone please?

    I have this same problem too, it really gets me upset

  • Satellite Pro A300D - reinstalled XP - now its does not work

    Recently, I had a virus on my laptop Toshiba Satellite Pro A300D-14O, which meant that I had to take it to get reinstalled Windows.
    This tech guy who I gave it to a do.

    However, now, the sound does not seem to work properly.
    The volume on the laptop wheel itself does nothing.
    I tried to open Control Panel to check the sounds and audio devices, but I could not change anything in the boxes.

    I tried to download a driver from toshiba Web site was updated, but I thought that it could not find the device driver support.

    Can anyone help?

    Hello

    You must install the Win XP SP3!
    This package must be installed BEFORE installing the audio driver.

    Install SP3
    Then remove the audio driver (already installed) system
    Go to Device Manager and remove the sound chip of the list of devices
    Restart the device
    Now reinstall the sound card driver.

    Should work as it worked in my case as well

Maybe you are looking for