Re-installed Windows XP and now I can't see the network connections and cannot get online.

Similar Questions

• I want to install windows 7 and I get an error saing that I need to install via windows PE? How can I go about it?

  I want to install windows 7 and I get an error saing that I need to install via windows PE? How can I go about it?

  Hello

  1. you try to perform a new installation of Windows 7?

  2. where did you buy the Windows 7 DVD?

  This particular message occurs generally if you try to perform an upgrade on the spot of a recovery disc or installation support OEM (Original Equipment Manufacturer) that contains a custom defined configuration and can't stand not running an upgrade installation.

  The message means that you probably need to start using the installation media. You can also contact the manufacturer of your computer to determine the type of installation media that you have and to confirm what options are available when booting from the disc.

  Here are some links that provide additional information about the installation of Windows 7:
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Alternatively, you can consult this article to understand what is Windows PE.

  http://TechNet.Microsoft.com/en-us/library/dd799308 (v = WS.10) .aspx

• I am trying to install Windows 7 and I get the error code: 0 x 80070017.

  I tried for months to install Windows 7 and I get the same error message.  In fact, I gave up trying, but my computer is running slowly and gel a bit so I thought I would give it another chance.  Can you help me?

  See if this post will help you: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-7-installation-error-code-0x80070017/2ea19373-2b4a-47e7-8584-04c6966589c3

  J W Stuart: http://www.pagestart.com

• I just installed windows 7 and cannot open powerpoint. Message says that my anti virus blocking. I tried to update (AVG) but the computer indicates that the driver is not compatible

  I just installed windows 7 and cannot open powerpoint. Message says that my anti virus blocking. I tried to update (AVG) but the computer indicates that the driver is not compatible

  How your problem is related to Windows Update (compared to the Windows upgrade)?

  You posted your question in the AVG Free Forum? -Online http://forums.avg.com/ 
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My DCIM folder was deleted by mistake now I can't see the picture of my camera which is a Nikon Cool Pix L3 on the computer

  My DCIM folder was deleted by mistake now I can't see the picture of my camera which is a Nikon Cool Pix L3 on the computer

  My DCIM folder was deleted by mistake now I can't see the picture of my camera which is a Nikon Cool Pix L3 on the computer

  ====================================
  The following freeware may be able to recover the
  pictures that have been deleted from your memory card...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Recuva downloads (versions)
  http://www.Piriform.com/Recuva/builds
  (Download the Slim version)

  If you have been recover files deleted from your hard drive
  Player... the best bet would be on a Portable version
  memory card or a Flash drive. (reduced risk of)
  overwrite deleted files)

  Introduction of Recuva (tutorials)
  http://www.Piriform.com/docs/Recuva/introducing-Recuva

  Recuva - indicating what to look for
  http://www.Piriform.com/docs/Recuva/using-Recuva/advanced-mode/specifying-what-to-search-for

  Taking pictures more should create a new folder DCIM
  on your memory card.

• I am trying to install Windows 7 and I get error 1316.A

  original title: HOW DO FIX YOU ERROR 1316.A?

  I'M TRYING TO INSTALL WINDOWS 7 AND TOLD TO REMOVE DELL SUPPORT. WHEN I TRY to UNINSTALL DELL SUPPORT I GET ERROR 1316.A JOB NET ERROR OCCURRED during the ATTEMPT OF READING of THE FILE C:\WINDOWS\INSTALLER\DSC.msi

  See...

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  Upgrade Windows Vista to Windows 7 (custom installation)
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom

• updated to 38.2.0 and now I can't see the messages. I don't see the list of folders in the left pane.

  I only see the list of folders in the left pane, but the messages are not displayed. It receives without problem, I can't see the emails.

  pscolnik,

  You were usng the lightning/calendar addon in time. Are you still using it?

• Windows Desktop problem because I can not see the desktop but only Windows Explorer

  Hi everyone, I have problem with windows 7, when windows lights, showed no office, only to see the Explorer window, when you type Explorer on track, re - opens the Explorer window. do not display the taskbar, show no office. Windows 7 (please do not suggest restore windows)

  Hello

  Two things for you to do to see if they will fix it:

  Do a Safe Mode system restore to before the problem.

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

  ___________________________________________________

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon

• WRT1200ac and WRT1900ac OPENVPN can connect but can not see the network

  I can connect but can not see the computers on the network. I've tried everything. Any help would be great. Thank you

  Firewalls are disabled on remote computers?

• Can't see the network hpsetup on my Macbook Pro on a C4780

  Help - I'm trying to get working wirelessly on a C4780 connected to a new Macbook Pro with 10.6.2.  I am on a network of wireless-G linksys with WPA_PSK and when the HP configuration utility try to connect to my network, it goes into "the network... search. "forever.  So, I tried to connect manually by some of the other posts, but I can't find the network hpsetup even after resetting to the default printer.  The serial number of the printer is CN99SD12ZF.  Is that printers with factory default SSID settings incorrect?  If so, what I try next?

  Some sent C47xx factory printers have an incorrect default setting in their non-volatile memory that prevents the method of ad-hoc configuration.  There is nothing wrong with the printer HW or FW and you should still be able to set up the printer using the Setup program on the CD.

  If necessary, it is a manual method to get the printer on your network.  Here's how to printers wireless C47xx:

  Part 1 - Get the printer in Ad-Hoc Mode Wireless

  (1) turn on the printer.

  (2) display the printer has six keys; three on the left (top-left, middle left, below on the left) and three on the right (top-right, centre-right, bottom-right).  Press and release the following touch buttons in order:

  top left,

  bottom-left,

  top left,

  top left.

  (3) you should see the internal menu of printers.  Press the right button down to select 'Service Menu'.  Press OK (lower-left).

  4) press the lower button right until you see "Reset Menu".  Press OK (lower-left).

  5) press the lower button right until you see "half full".  Press OK (lower-left).

  (6) after a few seconds, the printer turns off.  Press the power button to turn on the printer.  It is now reset with the correct default network settings.

  (7) turn on the radio:

  • Press the Scan button to get the wireless settings
  • Select wireless Menu
  • Select wireless settings
  • Select Enable Wireless to turn on the radio.

  Part 2 - run the Wireless Setup Wizard

  The printer has now created an ad - hoc network called hpsetup.  To connect to this network on your Mac.

  Check the connection to the printer by opening the printer's internal web page.  You can do this by opening Safari, select bookmarks and then Showall the bookmarks.  On the left pane of Safari, select Hello and on the right, you should see your printer listed.  Double-click your printer and Safari should display the printer's internal web page.

  In the Web page of the printer, click Networking , and then select Wireless (802.11().  Now press Start the wizard to launch the wireless configuration wizard.

  When the wizard is finished, your computer unplug the printer's ad - hoc network as the printer reconfigures itself to connect to your network home.

  Reconnect your computer to your home network.  Verify that you can connect to the printer at the opening of its internal web page again once we were doing before.

  Finally, install the printer SW.  Since you have Snow Leopard, you don't need the CD that came with the printer.  Instead, open the Print & Fax under System Preferences applet and press the [+] button.  Highlight your printer and click Add.

• recently installed windows live esentials, now I can't open live mail

  The message I see is that c:\programfiles\winsdowslive\mail\wlmail.exe.application could not start because the side by side configuration is incorrect. See the application event log. How can I cure this?

  Hello

  I recently had a similar problem with my anti virus after installing the Windows 7 SP1 update.

  Try to repair Windows Live Essentials under programs in Control Panel, right-click on the program icon and click Uninstall/change to this.

  I tried & it did not help, I have widows Home Basic Vista 32 bit

  I tried but no help even though I unstillalde and reloaded nothing change same error message

• I installed Windows XP Home Edition. Can not find the wireless network drive

  I installed Windows XP Home Edition on my spare PC.  Now I have wireless network card in the computer and problems to find the drivers for it, and I don't know what brand it is, so I know it's kind of makes it harder too.  Then I also have to start the computer, but if I press F1, the computer starts well

  I was just wondering how can I get rid of this?

  

  Disable all devices that can connect to your router (wired or wireless)...

  • PCs
  • Laptops
  • Tablets
  • Smartphones
  • Smart TV
  • Printers
  • Networked storage
  • Another thing that I have not mentioned above!

  Put on your router and wait for the normal light distribution. Then turn on all devices.

  I hope that your ip address conflict went away. Generally ip conflicts can happen when the router is running again without doing the same with all devices later.

  If you have even an ip address conflict, it is possible that you forgot something above or can someone use your router without your knowledge.

  Your router's wireless network is secure? Ideally with WPA2 encryption?

  Tricky

• Cannot install Windows updates and cannot install new programs due to Error Codes: CODE C355, Code 80070652

  Original title: C355 Codes error: CODE, Code 80070652

  I'm unable to download the updates of widows and also have problems to install new programs.  The error is in the topic above and also get a screenshot that windows installs another program that must be done first when don't want to install anything.

  Hi Whitefish50m,

  (1) what programs are you trying to install?

  (2) how long have you been faced with this problem?

  Please provide the number of up-to-date Knowledge Base that you are trying to install.

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: You can follow the steps described in the article below

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.

  http://support.Microsoft.com/kb/956702

  Method 3: You can also view the steps mentioned in the link below

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• Impossible to install windows updateKB2656353 and KB2656370-get error code: 0 x 80070643 (0 x 643)

  Original title: Windows updates will not be installed.

  Cannot install updates of security Windows KB2656353 and KB2656370 on Windows XP Home Edition version 2002 Service Pack 3.  Get the error code 80070643 0 x (0 x 643).  Installed Wiindows install 4.5 (KB942288).  Used he Wizard repair, which indicates that the problem is resolved, but the updates will not install always.  Please notify.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Reset components from Windows Update from the following link, which would help you to install the updates of windows. http://support.Microsoft.com/kb/971058

  Method 2: If the problem persists, then try the steps from the link below.

  http://support.Microsoft.com/kb/976982

  Method 3: Uninstall all versions of the .NET Framework work completely from your computer by using the removal tool and then try to install the updates

  See the link below:

  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx

  Hope this information is useful.

• Install HP Officejet 6500 E709n failure - can't see the printer on the network

  My HP Officejet 6500 E709n refuses to acknowledge that he is already on the network a specific IP address and used by other computers in my house. How can I get this software install to work?  I have to let Windows 7 install its own version, which worked (sort of).  I prefer having the center of solutions for scanning, but the HP install software (full version), in contrast to the MS Windows 7 software, can't find the printer on the network, even when I give the software the exact IP address.

  (Yes, I uninstalled all the pieces I had to uninstall in Control Panel by the NSB instructions re-re-re-install software page.)

  Hi rchimes,

  Thank you for the update. If you are unable to get the problem solved after using the doctor print and Scan follow the steps to scrub the software on the computer and then reinstall it.

  First step: clear temp directory

  1. tap folder in the race or search programs and files of field

  2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  3. proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77752-2&CC=US&DLC=en&LC=en&os=4063&Product=3795406&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know what you find?