Re: Instructions to open a Z930 satellite and the upgrade of the SSD

Similar Questions

• Instructions for opening a Z930 satellite with a slot for SIM card

  Hello

  I have a Satellite Z930, which I would like to open in order to replace the original SSD with a higher capacity.

  Wire http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=279122
  has been very helpful.
  But my PC has a slot for SIM card on the right side (side opposite the microphone and the earpiece)

  Even after the take-off of all 14 live (including the right of torx one downtown), back cover cannot be thrown on the side of the slot for SIM card. Something is holding back.

  Anyone in the community has already managed to remove the back cover to the confiuration?

  Thanks in advance for your help.

  Did you manage to remove the cover?

  There is no other method to remove the cover if your laptop is equipped with SIM card, first remove the SD card (dummy bridge media card), then the SIM card (you will need to insert a thin object into the hole on the sim tray) and then the 14 screws of the cover at the bottom of the unit.

  All that s

• The "Open new tab" button and the shortcut "Ctrl T" fail to open a NEW TAB

  The "Open new tab" button and the shortcut "Ctrl T" fail to open a NEW TAB

  Install Firefox 4 beta that healed, but brought other problems.

  The Ask toolbar is initially in the version of Firefox 3.6.13. Obviously something in this extension is not compatible with a Firefox security patch. Disable this extension or uninstall it.

• could not open windows live messenger and the error code 80040200

  Original title: error code 80040200

  I could not open windows live messenger and the error message I got was... error code 80040200... How can I fix this... Thanks for your help

  Hi NateGoodman,

  When you use Windows Live Messenger and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  Windows Live Messenger

  http://windowslivehelp.com/product.aspx?ProductID=2

  I hope this helps.

• How to connect two external HARD drive satellite and the same printer?

  Hello

  I have now two laptop Toshiba Equium.
  What is the best way to connect them so that they can access the same external hard drive and the same printer?

  Thank you

  Hello

  I guess the two laptops are in the same network; Home LAN or WLan. Right?
  I this case I recommend you connect HARD drive and printer to one of the portable satellite.

  Then you can share the HARD drive and the printer with other cell phones on the LAN.

  You could add the network permission to others, and in this case the other participants of the network would be able to share the printer and HARD drive.

• Qosmio F60 - 10K and the SSD speed

  Hello I have a new problem xD maybe not so great :)

  I bought Mushkin SSD 240 B speed Delux Calisto is 285/275...
  I have install Windows will receive with my laptop via Recovery DVD and I put out-of-box installation, my SSD speed benchmark is 200 about 150/145 and no more as I bought it I read somewhere it's not good for the SSD put in IMAGE and recovery CD Toshiba Windwos shoe IMAGE and I think it is for this reason It decreases my speed of SSD.
  So quastion is how solution maybe put on SSD speed over 200 MB is install fee Windwos 7 not out of box or?

  Btw2... I want to crypt my SSD with TrueCrypt 7. 0 has... How this decrease my SSD speed if anyone knows.

  Thank you to all who help me, final problem that I put on this forum has been resolved because nice people :) all ty!

  Hey,.

  Of course you can test it with your own installation of Windows, but I doubt it s a problem with the operating system preinstalled Toshiba. I mean this image is tested and configured for your laptop

  In your case, I would also check the version of the firmware of your SSD. There may be an update for it.

  Also, make sure that the version of the BIOS of your laptop is newer.

• Oracle and the SSDS

  Hello
  
  We have a database of 3 TB and in a few months with migrating to a SAN storage 8 TB of HP with SAS 15 K disks nine. I have no idea how the disks are configured, but the faster they are RAID 0 + 1. Of course, this system is a data warehouse. The vast majority of reports must be run on about 150 GB of data most recently added. The system includes 8 PA-RISC processors and 16 GB of RAM, but we could opt for Oracle RAC with 3 these systems (instead of 1 we use now).
  
  Is could someone please tell me if the SSD will offer all the advantages of this system? If so, what are we supposed to do? Tablespace Temp? Redo logs? Archive logs? Request for verification of output? Let's keep each month in its own tablespace and I thought maybe we could welcome the current month, where almost all reports are ran, in the SSD and at the end of the month move it to the HARD drive-based SAN storage. This configuration is feasible or is it too complicated for a vital production environment?
  
  Thank you.

  restructuring of the database to make the best use of the SSD

  Not necessary, if you map your data o tablrespaces files correctly.

  Just move data I/O files on the SSD, no restructuring device is necessary.

  I wanted the opinion of someone who has had experience with SSD and Oracle first hand.

  And you mine. I've used SSD for four years, love them! I have a database of 80 GB and SSD relief runns full fast.

• screen flickers on each open document, including videos and the internet?

  Hello

  I have problems with my computer laptop xp basically everytime I open a window it's running so slowly, that I can't do anything and I scroll the entire screen flickers and it happens to everything, including videos. Very annoying.

  Please help someone?

  Hello

  On the screen, try to change the refresh rate of your screen flicker, refer to the link below for instructions.

  http://support.Microsoft.com/kb/311403

• I delete history and cookies when I have Firefox but on start then it open with my homepage and the last used tab.

  If Firefox does not count instructions to clear the history on close what else is ignored and where it is storing the information.

  What you have set in the Options-general-startup-when Firefox starts?

• Windows open will not close and the computer does not except in safe mode. The mouse works, but can not open a file or a program.

  I ran the twice successfully system restore, but that did not help. When a window is blocked, hit CTRL-Alt-Del shows an error message "failure of Security Options. I use Vista. Open windows on the desktop were often not well closed for months, but now the computer freezes as soon as I opened the first window. Busy circle is present. Mouse still works but can't do anything for files, etc.

  Hello

  1. don't you make changes to your computer, after which the issue started?

  Follow these steps and check if the problem persists.

  Step 1:

  If it works in safe mode, I suggest that you can start your computer in a clean boot State and check if the problem persists.

  Note: Follow step 7 to your computer as usual.

  Step 2:

  You can perform disk cleanup to clean unwanted files on the computer.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

• I use Open-Web safe fonts, and the text becomes an Image. Why?

  When I use without opening the text becomes an image and when I use Arial text. How to save without open text?

  Without opening is available as a Web dashboard font.

  What section of the menu police have you selected without opening of? If it has been selected in the "System Fonts" from the menu police section then it will be output as an image. To use the Web version of fonts, click 'Add Web Fonts... "in the font menu, then choose" open without "in the edge Web fonts available.

• Whenever I open firefox, my homepage and the same two additional tabs open. I deleted the history. No luck

  I don't know what else to do. Help, please.

  Have you tried to reset your homepage?
  Maybe you set inadvertently 3 web pages as your home page.

  See - How to set the home page

• Satellite M60-139 - upgrade to mSATA SSD via an IDE adapter

  Nice day

  more capacity disc having, on the occasion of the passage of Win 7 I've tried alternatives to 80 GB built-in HARD drive.
  Use an mSATA to IDE adapter and an mSATA SSD 250GB.
  Install Win 7, system drivers, function ok.

  Because I don't know if the types of other manufacturers may be mentioned in this forum, I did not provide all the details on this subject, but you give information that Config. with me is running...

  Wishes Gerhard

  > Use a * mSATA IDE adapter * and an mSATA SSD 250GB.
  > Win 7 install, system drivers, function ok.

  If you updated successfully the laptop with a 250 GB mSATA SSD using an IDE adapter in mSATA?

  Very interesting!

  Thanks for sharing your info!

• My document Pages when sent in PDF format opens with Acrobat Reader and displays the text pane

  Hey team

  I am a new user of recent Mac and I have some difficulty with the Pages.

  I'll create a new document and save it as a PDF file (save it to the desktop), when I open it again, it opens with Acrobat Reader and the text released along side this one pane. It does not open a document own stand alone. This cause me a problem when I want to send it as an attachment, as it includes this component, as well as all other toolbars with.

  Any help on this would be appreciated.

  SSA56,

  When you send the PDF document as an attachment, it will be sent as a document 'stand alone '. It will be open according to the preferences that are set by the receiving party.

  

• Opening Subvi in secondary and manage events

  Hello

  I'm trying to run a code where I have a "hand VI" with a header and a secondary. I change the value of the selector in the header, the secondary should show a Subvi. In the Subvi I buttons that will generate random numbers for indicator 1 (slot 1 - VI) and for indicator 2 (2 slot - VI). The idea is, as I push the button for the generation of random numbers, the indicator will be updated even if the Subvi has currently shown in the main VI high school is not the one that contains the indicator which will get the new random number.

  I created the cluster of references (type strict def) to make things easier. Find attached a zip file. Decompress all the files in one folder and run the VI.vi initialization file. An error message (1001 - front panel is not open) will pop up and the hand VI.vi doesn't open, that it could supposed to.

  I changed 'Appearance of windows' by default, dialog box etc and almost all tried, but I don't get the desired result.

  Of course, this code is just an example to show what I want to achieve, that is why it is so simple.

  Thank you all.

  Dan07.

  You definitely need this structure?  Normally I would expect main to be the top-level VI and initialization to be a Subvi.  If you are not restricted to this particular structure of the VI, you could perhaps describe the effect you want to achieve and let others think about how you might accomplish it, rather than describe the desired implementation.  For example, in your current structure, you know how much possible subVIs you can embed in the secondary.  Given that, it may be easier to place a control tab on the main façade and hide tab selectors.  Assign a single page each slot - VI - either integrate a Subvi to each page, the controls for each page that correspond to those required by this Subvi is implemented.  Use the enumeration as the tab selector.