Re-intsaller after crash

Similar Questions

• How canI force FF DO NOT reload old session after crash/reboot the PC?

  My PC has problems and crashes. This isn't a problem with FF BUT: cause me this problem in FF: after reboot, when I restart FF he tries to recharge old session, EVEN if my options are set to 'Show my home page' and NOT 'my windows/tabs from last time '. When he tries to restore the tabs, FF, it causes my PC to hang & crash AGAIN! How can I force FF again, as if I could close healthy? Maybe a way to launch FF in 'safe mode', sort of? Thank you! -Marvie

  The value of the integer pref browser.sessionstore.max_resumed_crashes to 0 on the subject: config page in order to get the about: sessionrestore page immediately with the first reboot after a failure has occurred or the Task Manager was used for the closing of Firefox.

  • http://KB.mozillazine.org/browser.sessionstore.max_resumed_crashes

  Which allows to deselect the tabs that you do not want to reopen, but will reopen the other tabs.

  See:

  • http://KB.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
  • http://KB.mozillazine.org/browser.sessionstore.max_resumed_crashes

• Screen 5600ea - completely black HP Omni 10 after crash while on the remote desktop connection

  I hope someone can help me with this.

  I had updated my Omni 10 to Windows Pro 8.1 so that I can Office remotely on my tablet on my work lan to get the benefits of the 2013 Office (we have not this version to work) on my work PC.

  Anyway, while it is connected to my 10 Omni via desktop remotely my Omni 10 crashed after connecting a USB drive that is powered via a USB OTG adapter. I used the front adapter without any problem with the USB card readers bus-powered and also the Lan USB card so I know it works, and the outlet powered USB hard drive works on my PC without any problem.

  The Omni disconnected from the remote desktop, and I guess it crashed, but the screen is black even when I hold down the power button and wait for the vibration (which usually means that it is set to zero).

  There is nothing displayed on screen, my work PC is unable to connect via Remote Desktop, and any number of power cycles seems to relive.

  I tried with the attached Omni 10 charger and without.

  There is no HP logo involve restarting at any point, but the Windows key infiltrates a vibration when I push on it.

  While enjoying the fact that the Omni 10 comes with the base Windows 8.1 and not Pro so I changed the configuration it worked fine for a few weeks since the installation.

  Pointers on getting this thing to life would be appreciated.

  Thanks in advance.

  I returned to the store that I bought, and they sent to HP for warranty repair.

  28 days ago so I went back to the store and they gave me a brand new boxed 10 Omni processor.

  When I got home I installed the driver and Windows updates. I noticed that the WiFi reception was really bad, even right next to my router, and the cameras had lines on the screen and the pictures that I took.

  The next day I went back to the store and they said all that and they initially said that I have to wait another 28 days, while it went for repair. When I said that this was not acceptable, they gave me a full refund of the amount that I had paid and used that to purchase a Pro of Microsoft Surface.

  The Microsoft Surface Pro is fast, well doneand more importantly everything works.

   

  TAKE NOTE, HP - IT IS HOW A WINDOWS TABLET SHOULD BE.

   

  I'm done with lag, unstable and downright unreliable HP products.

• Windows won't start after crashing... What can we do?

  My daughters computer is crashed and now when we turn it back on, it cannot start windows properly.  It displays the progress bar and windows screen but then goes directly to the start menu.  We have tried all the options on this menu, and nothing works. What can we do?

  We have tried all the options on this menu, and nothing works.

  There is a good chance only you see the menu limited :
  
  http://TechNet.Microsoft.com/en-us/library/Bb457126.f0czs01_big(l=en-us).jpg
  However, you need the FULL Menu of Advanced Options - the same one mentioned in the post of "A. user" which are accessible by pressing F8 (sometimes repeatedly) after turning on your PC. It should look like THIS:
  
  http://forums.Toshiba.com/T5/image/serverpage/image-ID/310iBDC8F2C21B52056A/image-size/original?v=MPBL-1&PX=-1
  You must select the item that is highlighted in the screenshot above:
  Disable the automatic restart in the event of system failure
  You can give us the appropriate information the STOP error see you.

• Invalid product key: Re-install WinXP Pro after crash of HD and replacement on the old computer.

  After the hard disk crash and replacement on the old computer, reinstall Windows XP - Pro.

  I have genuine WinXP Pro, with product key, etc. on the sticker on the computer.
  Install does not accept the product key. Error: the product key is valid.
  Several CAREFUL attempts, so I do not know as I type the key correctly.
  New HARD drive is SATA (former was IDE), so need to massage WinXP to accept SATA install.
  Set of installation is Windows XP Pro SP3, with SATA drivers (with n - Lite).
  Help!

  When is the key being denied? -Keep in mind that there are "excluded" characters (for example, 0 and I etc.) and those that are very easily confused (8/B, 2/Z, etc.) and, if the answer is in the system rather than by the activation servers, it is likely that this is the problem.

  I can only suggest that you keep plugging away with the product key update tool until you find the right key.

• try reinstalling xp after crashing keep getting [entry ntkrnlmp.exe sources disc of the files is corrupt or missing.please help]

  Hi trying to install windows xp after the file error code is crashing.keep 7. "also - entry ntkrnImp.exe ' source files on disk

  section of the inf file is damaged or missing, I changed the thinging of writer rw drive also the DVD could be the problem.please HELP... keith

  Hi keith,.
   
  Try the steps listed in method 3 in the following article and check, if this can help you in the matter of fixing:
   

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

   

• LOST MY SOFTWARE OF CREATION OF DOCUMENTS AFTER CRASH COMPUTER

  MY COMPUTER CRASHED AND ONE OF MY FRIENDS SPENT THE ORIGINAL DISC THAT CAME WITH IT IS UP AND RUNNING AGAIN, BUT AFTER THAT I DON'T HAVE MICROSOFT WORD OR ANY TYPE OF SOFTWARE FOR CREATING DOCUMENTS.  IMY COMPUTER RUNNING WINDOWS XP HOME EDITION

  Microsoft Word doesn't do not part of the operating system. You will need to locate your original software and reinstall.
  You will also have to locate all of your other software you had installed and reinstall.

  It seems that your friend has reinstalled the operating system.

  TaurArian [MVP] 2005-2010 - Update Services

• Restore Windows 7 academic downloaded the upgrade after crash HD

  I had a HD crash. My 64-bit machine was running Windows 7 Ultimate, bought a school upgrade and downloaded. W7 disappeared after the crash. I had the legacy Vista installation to a different drive, but cannot see how to download the upgrade or recover activation key again. What's worse, I can't reinstall my Office 2010 (which was installed on a disk survivor after upgarding to W7 so no longer works) because the Setup program is unable to remove the existing version of Office 2010. Even the fixme utility cannot find Office 2010.  Any help gratefully received, any necessary information provided with happiness.

  Thank you

  J.

  First of all, you need get the product keys for Windows 7 Ultimate and Office 2010. They must have been sent by email you somewhere (with a bit of luck you have deleted emails).

  Then you should download Windows 7 Ultimate 64 bit .iso and the correct version of Office 2010 that should be in my wiki Microsoft Downloads:
  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/Microsoft-Windows-and-Microsoft-Office-downloads.aspx
  This wiki should have full instructions to create media. My other wiki A Clean install of Windows 7:
  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/1434.aspx
  should be used as a base to install it, but some measures should be modified slightly if you use not a Dell computer, which is to get the drivers from the manufacturer's website is opposed to the Dell one and another key opposed to F12 may be used in a non - Dell PC.

• Windows vista 64-bit crashing into the screen blue and often impossible to reboot after crash

  My windows crashes constantly everytime I try to watch a video or go to a page with java, if I try to install the new version of Adobe, it stops it's self down and do not restart, just it becomes black and stops.  I pay for membership to netflix and I can't even watch a movie. I go on youtube it crashes, I'm trying to play farmville on facebook, he crshes... in a blue screen and this is what I get when I start it again:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA8006F77030
  BCP3: 00000000B 6000000
  BCP4: 0000000000000181
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini071911-04.dmp
  C:\Users\DrGraceG\AppData\Local\Temp\WER-85098-0.SysData.XML
  C:\Users\DrGraceG\AppData\Local\Temp\WER26A2.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  July 20, 2011 Crash, 6 times

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA80070B6030
  BCP3: 00000000B 6000000
  BCP4: 0000000000000181
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini072011-01.dmp
  C:\Users\DrGraceG\AppData\Local\Temp\WER-144456-0.SysData.XML
  C:\Users\DrGraceG\AppData\Local\Temp\WEREBE4.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  July 21, 2011 breaks down, 4 times

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA8007066030
  BCP3: 00000000B 6000000
  BCP4: 0000000000000181
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini072111-03.dmp
  C:\Users\DrGraceG\AppData\Local\Temp\WER-57470-0.SysData.XML
  C:\Users\DrGraceG\AppData\Local\Temp\WERC13B.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  July 22, 2011 crashed 7 times

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA8007066030
  BCP3: 00000000B 6000000
  BCP4: 0000000000000181
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini072111-03.dmp
  C:\Users\DrGraceG\AppData\Local\Temp\WER-57470-0.SysData.XML
  C:\Users\DrGraceG\AppData\Local\Temp\WERC13B.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Many many people have this problem when I talk to others. Miscrosoft compromises our computers so we would have to buy new ones?
  They know there is a problem and they don't even try to find a solution for this. In this economy, they force people to buy new computers, they will just leave people blocked company becase NOBODY takes the phone, if you do not have email, people don't keep in touch, if you are not on a social network or business networking nobody will know your business, you won't make any money nobody reads the ACTUAL newspapers these days, everybody reads the news on the internet. They only hurt people, they are forcing anyone to buy a new computer, people just can't afford it. Hundreds of thousands of people can barely keep their utilities on. In doing so I wish they will reconsider. I am disabled I will definitely cut if my computer goes down for good.

  Can we do any smell that?

  There are also a lot that I need to run startup until the restoration. Windows restarts after the crash of the blue screen, I reinstalled windows twice, it works fine until I have start to install all updates. I have only installed MSE and it still happens. I lost all my music I paid a lot of money for, my paintings for children, important documents, all because I had to reinstall windows twice now.  I may have to reinstall them once more and I do NOT wish to install the updates again. He really never stops until I installed updates to windows. I thought that if I use the programs from Microsoft that it will work, because after all, it's all done by the same company, but no, nothing works. I am so in the sincere real despair. Be alone without technical skills, hardly what actually on my disability check, now I'm going to cut everyone. Now I can't do ANYTHING without it crashing, nothing fun anyway. I tried Microsoft fix, I tried so many solutions. I paid for Adobe photoshop, because I like to draw things and I'm terrified to install it. I'm afraid to do anything fun or useful on this computer.

  If I can afford a new computer at any time, I think I will try Apple, I lost my trust in Windows. Unless they make an effort to solve this problem, then I would give them a chance again, but not if they will try to help. I'm so frustrated. I spend a lot of money on this computer, it's an ENTERTAINMENT laptop and I get not very amused.

  What is going on?

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way? Heat associated
  does not necessarily mean excessive heat, it could be something is too sensitive to the same
  normal levels of heat. Also a computer will produce more heat as is pointed out how adding
  software or updates, among other measures, causes it. Of course those actions should not
  cause enough stress or heat to shut down the computer.

  For a laptop on everything that you can do is reinstall the memory and clean the ventilation openings (still may try to add
  a small fan as a test). Of course first remove all power.

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check this thread for more information on using BlueScreenView, MyEventViewer and other
  Troubleshooting BlueScreens - top 3 responses (+ 1 other) methods.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  BCCode: 124 0 x 00000124

  This is usually heat related, faulty hardware, memory, or processor even if it is
  "possible" he is associated (rare) driver. To be able to remove ALL and reinstall all the cards, memory
  and cables (at both ends) - actually delete and replace - are not just tight. Ensure
  the system has proper ventilation - add a small fan blowing in the contributions. Carefully
  Inspect the card mother and other cards for damage. Pay attention to the fatal material
  error implicitly. You may need a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or system manufacturer support.

  There has been a few cases where Norton/Symantec and other antivirus/security
  programs have caused this error.

  BCCode: 124 0 x 00000124

  Bug WHEA_UNCORRECTABLE_ERROR control has a value of 0 x 00000124. This bug
  verification indicates that an unrecoverable hardware error has occurred. This bug check uses the error
  data provided by the error Architecture WHEA (Windows Hardware).

  0 x 00000124<-- read="" this="">
  * 1289.html http://www.faultwire.com/solutions-fatal_error/the-System-encountered-an-uncorrectable-Hardware-Error-0x00000124-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Restoration after crash

  I had a system crash earlier that would not allow the opening of windows. Automatic repair would not work after several attempts so I had to restore the original settings. He asked if I wanted to create backups of things like pictues and internet settings and I did and copied to the disk. Now that I'm ready to put back them in the system... I can't understand what to use to read the disc to put them in. What should I use to play the disc in order to get this valuable information in my system?

  :(

  Mark

  This backup Option would have been given to you during the process of recovery back to factory settings

  This recovery Process (including the Backup) would be part of the process of recovery of the manufacturer of the computer.

  You'd have to ask them how to reinstall the data after the use of their backup process.

  See you soon.

  Mick Murphy - Microsoft partner

• Reinstall Windows Vista Premium after Crash

  I have a Sony VAIO computer that crashed to the point that the original Windows Vista Home Premium could not be reached through the partition.  I brought my computer to the service and it came with Windows Vista Home and Hungarian that I live here in Hungary (bought the computer with its program in the States) so my question is - how can I reinstall the windows came with my computer.  Of course, I have the PID on the underside of the computer. ???  Can someone help me? -This is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Contact Sony Vaio and get the recovery disks CORRECT on their part in proper English and reinstall Vista Home Premium.

  Or, take where you guessed it Serviced and REQUEST that the relocation of fact in the appropriate language.

  Do NOT play with 3rd Party Software, when you've already paid for a Vista ENGLISH Home Premium version...

  Here are the General steps to acquire Recvoery Media:

  There is no Vista free download legal available.

  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 Build 7601, now says not genuine after crash

  Bought/installed Win7 Pro on my (aging) machine time Jan/Feb & activated product.

  After a week away recently, my PC did not boot - just crashed.  Last known good configuration did work, catering to the highest point due to a registry restore problem.   Anyway, forced the cancellation by renaming config & software in the \system32 folder.

  Then machine again, I'm immediately went to Windows update to ensure that it was up-to-date & then had "Windows 7 Build 7601, this copy is not genuine."  Had been authorized for about the last 7 months.

  Have tried to change the key product & scoring even once again.  As well as the uninstall & reinstall it again once, but no change.

  I already download Win10 install files when the option popped up;  Maybe I should have completed the installation. Although it may have failed.

  Anyway, here, is out of the tool of diagnosis of MGA.   I hope someone can advise:

  Thanks in advance.

  ----------------

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-*-*-*-9T9KP
  Windows product key hash: FqSWTguNoybw3tVSPd8O8CBPCrI =
  Windows product ID: 55041-152-1911045-86235
  Windows product ID type: 6
  Windows license type: Volume MAK
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {729FBCB9-07DE-4431-B8AA-769A3CA07816} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150715 - 0600
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {729FBCB9-07DE-4431-B8AA-769A3CA07816}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-BATH55041-152-1911045-862356S-1-5-21-3698907309-127372443-2681329950MICRO-STAR INTERNATIONAL CO., LTDMS-7360American Megatrends Inc.. V1.10 20081111000000.000000 + 000ECB23E07018400F808090409GMT Standard Time(GMT+00:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel VOLUME_MAK
  Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 55041-00172-152-191104-03-2057-7601.0000-2452015
  Installation ID: 003795222413929355389113005742479776534552881271123680
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 9T9KP
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 4
  Trust time: 23:02:42 09/11/2015

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 9:11:2015 23:34
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: NgAAAAEABgABAAEAAAACAAAAAQABAAEA6GEeXVi/dOYGnuSpcrToGIj90v0wjoYHTEH0TExY

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC0906 APIC 111108
  FACP 111108 FACP0906
  MCFG 111108 OEMMCFG
  LASRYVITRAGE OEMB0906 111108
  GSCI 111108 GMCHSCI

  I spoke with MS support.  The representative has essentially kept repeating that the product key was not for home/use; later mentioned he has a license of the company & had been used several times.

  However, he had no answer to come as to how is it this had been works well for 8 months & problems have emerged since my start/disk/registry problems.

  It takes time for this abuse be detected by Microsoft because it is a Multiple Activation key (a lot of PC have or will have the same problem) that very probably activated too many times (each key has an activation limit)

  I also tried to find more information as to where the key was first used / details of other activations (in the case where was my repeated recent attempts during the activation/validation was just suspended);  but only repeated representative key is blocked.

  They may not know / have a record of when it has been used first.

  Y at - it other advice? My Win7 installation has been very recently posted just grab the update Win10 install files;   However, I'm guessing that it's probably not worth trying to go down that path right now?

  Since you have not a valid Windows 7 key from the upgrade of Windows 10 can install but most probably (but not immediately) detects the invalid key and also go "(Non authentique)."

  Of course, if it turns out that I need to splash £100 on a 'get genuine' license then I will - but was hoping to get data confirming the situation [seems that my previous purchase by Amazon will not get any farther].

  If this MAK key was purchased by a third party seller to Amazon for their web site at Amazon report. At the very least, they should block / prevent the seller by using their (Amazon) web site.

  Or else I'll watch Win8.1 (& get top of what to Win10 update as soon as possible) or Win10 at home; Although I had barely begun to use Win7 XP!

  Since you said that you have an aging PC I would stick with Windows 7 (support ends January 14, 2020).

  One thing, you can try if you are still interested Windows 10 (after the backup of your important data files is to install Windows 10 via the GWN icon on the taskbar or the media download: https://www.microsoft.com/en-us/software-download/windows10 )

  This will tell you at least if Windows 10 fully supports (graphics, Audio, keyboard and mouse, access Internet, etc.) your PC.

  J W Stuart: http://www.pagestart.com

• Cannot close the game after crash

  Skyrim crashes on me and usually on Windows 7, you can bring the task to the top manager and force close. However, the game covers the screen, without giving in to display the Task Manager. It opens, but it is behind everything. You can still access the Metro interface, but it is not necessary for this situation.

  Even raise the command run and trying to force close does not work.

  Hi SonicHyuga,

  Also, if you go to the prior Task Manager when running it but above all questions then click on Options, always on top.

  This should help in trying to use the Task Manager after a problem.

  I hope this helps!

• AutoRecover off itself after Crash

  Hello world.

  I've been using Illustrator and it crashed unexpectedly. I then loaded it upwards and it crashed again, but this time it crashed when loading the recovered files. He then put a message saying Illustrator is cutting AUTOMATICALLY recovery and then deleted the files recovered. Essentially, even if it files retrieved the first time, it failed the second time because she turns out recover itself. How it is something, I don't know, but here's my questions are:

  1. where are located the recovery files? I checked the folder in the settings of recovery, but it is empty.

  2. is there a way to recover this work?

  I use a MAC BTW.

  I can't believe that a professional product which announces such a feature would allow him to work that way.

  Thanks in advance for any help that anyone can give.

  There are two types of files involved in this.

  The real recovery file: this isn't a file of default, but really HAVE a specific file type, which must be processed by the algorithm of recovery. You can't just open.

  Some kind of database file or something.

  These files are only present when there is something to recover. After recovering files or removes them when crashing again Illustrator puts at least somewhere else.

  If you want to play safe: try the Autosaviour plugin. There is a free version available. It saves files HAVE real.

• Recovery after crash OS project

  How can I save my cc edition of the 2015 project after a crash of pc windows 7 OS, with need to reinstall windows. 1 year of work on the project. Can only use mode safe with very paralyzed capabilities. Cannot open even first pro. Get online. Files open to see etc...

  Duplicate, SEE ALSO DUPLICATE LOCKED save project task after os crash

  If you can access the files, then Yes, you can copy on an external drive.  You will probably have to repeat them after reinstalled the operating system, even if you put them in the same location.

  Make sure you copy all the media used in the project, but also the project files.  If you have plug-ins, they will be reinstalled as well.

  I copy on two different hard disks so that you have a backup if you yet did a backup.  You can also get to do a disk after reinstall image so that you can avoid having to reinstall if this happens in the future.