Re: Is it possible to create the current configuration of the software recovery disk?

Similar Questions

• EliteBook 850 G2: SimplePass absent of the software recovery disk

  Hello

  First of all, I don't know if I post the question in the right place, and I apologize if I'm not.

  I bought the laptop with windows 7 and received two CDs with it, one for install windows 10 and the other to re - install the software that came with the computer.

  I used a program before moving on to Windows 10 * that has been activated with my finger, saved my passwords, and I was able to connect to my windows with the fingerprint account.

  After the upgrade to windows 10 and install all of the software contained in the software recovery disk, I can't find this program.

  This software should come in the recovery disk? Why is it missing? How can I get that again?

  * which I'm not 100% sure it was SimplePass

  @hpatricia

  Your enterprise class system uses a software Client Security (not SimplePass).

  Page of the site system Web pilot:

  Laptop HP EliteBook 850 G2

  The Synaptics (fingerprint driver) driver is in the category

  Driver - keyboard, mouse and input devices (5)

  Download Driver Synaptics and information Page:

  Synaptics WBF fingerprint driver

  

  The security software is in the category

  Software - security (1)

  Client Security download and information Page:

  HP Client Security Manager

  

  Load / install the fingerprint Synaptics first driver >

  Restart and sign

  Windows key > settings > accounts > Sign-in Options >

  Assign an identification number (Security Windows requires to enable the fingerprint reader) >

  Activate the connection of fingerprints

  Once the Windows PIN / fingerprint is activated, load and install the Client Security program >

  Restart and sign

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Cannot create the emanagement recovery disks

  Hello, I have an acer aspire one d255 I want to reset to factory default. I never did an installation of a recovery particion before this thought I'd better create discs of backup just in case.

  I have found the directions to create the disks, but whenever I select 'create disc factory default "I get the following message.

  "

  Configuration of the hard drive is not set by default. Abandoned backup.

  The only hardware change I did via the MMC disk management, I declined the c drive and made a particion of data storage.

  What is causing me to not be able to make the discs?

  more importantly, I'm likely to encounter a problem to make the recovery disk reset, if she can't create discs?

  If you don't have all the data your new partition created yet, simply expand the disk partition hard back to the State of origin and create more complex recovery disks.

  Hope that helps, good luck

• Unable to create the 3rd recovery disk

  Hello
  I am
  get an error when you try
  to create the 3rd DVD+ R.when it check 2% who say the message "that we live."
  Recovery media errors
  creation. Please try again. »

  Pavilion dv6-6113tx
  number-LZ765PA
  Core i5 W7 home premium
  pls help
  Sohag

  Hello

  Here's another suggestion that may help.

  Start Notepad and let Windows load completely.  Hold down the Windows key and press R.  For the run box, type msconfig and press ENTER.  In the System Configuration window, click the Startup tab, uncheck the box next to each startup item and then click on apply to apply the change.  Restart the computer and see if you can now get 3 disc to burn and check - as I suggested earlier, if it creates all the other disks before starting the window System Configuration and re - allows objects of start - stop and try again.

  Kind regards

  DP - K

• Is it possible to order the right recovery disk set by using only the serial number?

  Hello

  I'm trying to order a set of recovery disc for what is customized for VAIO laptop. I would like to be able to put it back exactly the same way that they were shipped originally. For some strange reason, because I was not asked for S/N, I know that I will not ship the correct game.

  Since there is no return on the software, how can I be sure it's the correct game before ordering? Is their way to get the part number control myself using only S/N, if not, how about raising via serial number?

  I've already tried this https://servicesales.sel.sony.com/ecom/accessories/web/categorySearch.do?operation=subCategorySearch... but do not recover my particular model because it is Canadian model purchased.

  Your help is really appreciated.

  Thank you for your support.

  They are here:

  MODEL: PCG - 31112L

  MODEL NAME: VPCZ1390S (was a personal shopping via the online order of Sony of Canada with additional features and applications added - more than the Basic with the same model name model).

  Please consult this site raw and obsolete from where it was originally custom. Although it is more useful, but it can provide an idea of what I mean, the link is http://store.sony.ca/webapp/wcs/stores/servlet/SYCTOProcess?storeId=20153&langId=200&catalogId=10080...

  I think the specific set of recovery disks only who would be able to restore this address to his State of origin as the day, it was shipped via Sony, should be stopped by S/N and perhaps along the ST as well. If it is ordered using just the model and or the name of the template, the result would be a generic RDS used on all of the same model and would not now for his counterpart custom, with still the same exact model information.

  SERIAL NUMBER: J004DSU8

  SERIAL NUMBER: 54047221-0000247

• After chaning password on the computer, power failure and it is impossible to create the password recovery disk

  I put a password in a computer and a power failure the stop before I could create a floppy or Flash-back to the top.  Any solutions would be appreciated.

  The computer is running on Vista Home

  Hello

  If you know your password but vista does not read the information below

  http://support.Microsoft.com/kb/940765

  If the front is not the case read this:

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  I mean ' diskutil cs * " and so on..."

  Yes, you must use the resizeStack command. Please see Re: how to repair fsck "your drive could not be partitioned..." Bootcamp does not as an example.

• Is possible to create the WINS resource record in DNS server and how?

  Is possible to create the WINS resource record in DNS server and how?

  No resource record WINS I can create when it right click on and select "other new records".

  If you were using abusive or foul language, insults, etc. He would get you banned from the forum.

  If you have done any of these, then I suggest that you do the following:

  If banned, ask reason why and offer him your defense

  If not banned, then let them know the name of the person "you kicked off the forum" reports of ill-treatment.   They will study.

  If you haven't seen any action on your report, and suspect that the Forum is not being actively monitored, you can request action by clicking the Site feedback link at the bottom of any Forums page.   -Taken from

  Forums Help FAQ

  http://social.technet.Microsoft.com/wiki/contents/articles/7359.forums-help-FAQ-en-us.aspx#197

  We get off topic with this conversation and the COC States:

  Keep the topics of conversation on track. ............

  .......... Discussions can be blocked in the forum comments if necessary.

  If there is any other questions about WINS, then consider marking response as appropriate.

• Is it possible to create the icon PDF format display with the cover of the document image, when sending via "Mail" on a mac?

  Is it possible to create the icon PDF format display with the cover of the document image, when sending via "Mail" on a mac?

  InDesign has no control on how Apple Mail displays a PDF it creates.

  My experience is that Mail displays a preview of a single PDF page, but not a multiple page PDF. In addition, for a single page PDF, the user may tip if the PDF shows a preview by right-clicking the icon/preview.

• Is it possible to create the page without having to install apps on personal system

  Is it possible to create the page without having to install apps on personal system?

  Hi hankouraou,

  installation of oracle in the system applications, you can run any page of the OAF by jdeveloper. If you want to develop any stand-alone page (without oracle application), you can go to the ADF.

  Thank you
  Vandenplas.

• Satellite L - cannot create the Vista recovery disc

  Hello. I am trying to create the recovery disk. Takes 2 DVD, no problem with the 2, but when I am burning nr.1 and is about to finish showing me the error message:

  The following question has occurred during the recording of the data on the disk.
  The current process will be stopped.
  A power calibration area error.
  Please check if the disc is scratched dirty.
  If so, please try again with a new disc.
  (error code: 0E01B5-26-00037304)

  I tried 3 or 4 times, brand new DVD each time. Any ideas?

  Hi zombi71,

  What brand of DVD that you've already used? These burning questions can be linked to the mediums of poor quality so it s recommended using mediums high quality only. I have pretty good experience with Verbatim and TDK discs and especially with the DVD-R DVD + R. So I would recommend Verbatim DVD-R. With this brand, it was possible to create the mediums of recovery on my laptop. :)

  Check this box!

• I purchasedUnable to create the ASR recovery diskette after backup

  I bought an external hard drive to use as a backup of the system. The backup was successful, but in the end, I couldn't create the ASR restore disk. Is it possible to create one now?

  Hello

  You must have the floppy drive to create (ASR, Automated System Recovery).

  Visit the links which has information about how to Set up and use automated system recovery in Windows XP: http://technet.microsoft.com/en-us/library/bb456980.aspx

  How to recreate a lack automated system recovery diskette in Windows XP: http://support.microsoft.com/kb/299526

• Is it possible to download the Toshiba Recovery Media Creator?

  Hello everyone,

  I have a question on the Recovery Media Creator. Is it possible to download it from toshiba.com? Because I can't find it here... I deleted from my computer cell, just thought that I should not use anyway. But now I have to install a second time to remove stuff from my laptop.

  Hope someone can help me here,

  Robin.

  Hello

  To my knowledge, this is not possible because the Toshiba recovery disc creator is part of the image of Toshiba and it can be used only in connection with the files of images available from Toshiba.

  If you would like to format the HARD drive and install the Win 7 OS own then Toshiba image files would be unavailable and the Toshiba Recovery disk Creator will not work.

• my windows vista computer is to download a lot of updates which will create the lack of disk space in my hard C drive? Please help...

  my windows vista computer is to download a lot of updates which will create the lack of disk space in my hard C drive? Please help...

  You already have disk cleanup?

  Please use this tutorial:
  http://www.Vistax64.com/tutorials/76073-disk-cleanup.html

  The Atlantic tutorial has 2 parts:
  Step 1 to 11 is for the classic disk cleanup which will give you back some disc FEPs.
  Step 12 until the end (more), is to delete all except the most recent restore points. This will give bring you a ton of disk space.
  ATTENTION: Make sure that your computer works OK because you delete restore points.
  You have no past point to fall up to restore more new restore points are created.

• My iMac OsX desktop computer had hard disk failure and needed replacement.  I lost much of my software, including all my Adobe CS6. Is it possible to download the software again if I have the serial number of June 2012?

  My iMac OsX desktop computer had hard disk failure and needed replacement.  I lost much of my software, including all my Adobe CS6. Is it possible to download the software again if I have the serial number of June 2012?

  Hi Roger

  Please follow: download Creative Suite 6 requests to re-download the software.

  Thank you

  Varun