Re: M100 change HARD drive

Similar Questions

• Can I change hard drive with an SSD in Toshiba NB100?

  Can I change hard drive with an SSD in Toshiba NB100?
  The hard drive in this model is the same size as SSD 2.5 drive "?

  Hello

  As far as I know the laptop supports the disk HARD 2.5 SATA.
  I think you could use a SATA SSD drive. Usually some SSDS require the firmware update but this should be provided by the manufacturers of SSD drives.

• Qosmio F750-129 - change HARD drive

  Hi all

  For my QOSMIO F750-129, currenlty it works with native hard drive Hitachi HTS547575A9E384 (5400 RTM)

  I would change this hard drive for a faster:

  Seagate hybrid SSD Momentus XT ST750LX003 2,5 "SATA III 750GO (7200 RPM)
  or
  Hybrid of Seagate 1 TB portable computer SSHD ST1000LM014 (5400 RPM)

  Is it possible for you (power, temperature, SATA interface...)?

  Thanks a lot for your help.

  To increase the performance of the laptop HARD drive change is recommended. I recommend exchanging it with SSD. You will see the difference. Computer laptop will start and runs much faster than before.

  Toshiba also offers SSD so if you need some info visit http://storage.toshiba.eu/cms/en/index.html

• Satellite M30 - need to change HARD drive

  Hello

  I bought a Satellite SM30-104 (model No.: PSM30E-0QRYK-EN) in 2004 and it seems that the HARD drive is dead since it reboots windows xp family again and again. While Windows is loading, at some point, the laptop restarts from the beginning. I can not even access the Bios.

  Therefore, I suspect the HARD drive to be dead and would like to change: SMART MK4021GAS HDD2182 B ZE01 T, 40 GB, 4200 RPM,.

  Could you please let me know where I can buy a new, similar or compatible with more storage?

  Your response will be much appreciated!
  Best regards

  Florian PAUMEIR

  > While Windows is loading, at some point, the laptop restarts from the beginning. I can not even access the Bios
  > Accordingly, I suspect the HARD drive to be dead and would like to change: SMART MK4021GAS HDD2182 B ZE01 T, 40 GB, 4200 RPM,.

  Hmm if the HDD died then windows would not load what whatever, and you get an OS message cannot be found.

  However, if you want to change the HARD drive then you can do this
  You will need a 2.5 IDE HDD. I think the 120 GB limitation due to the LBA28bit
  However, it is my personal opinion perhaps more HARD drive would be compatible as well

• change hard drive in HP laptop g72 failed to retrieve

  Please help me

  I changed my hard drive and installed a 1 terabyte western digital drive with win 7 recovery disk installation 1 hp g72 in the dvd player, I restart and it seems fine disc format hard checkde and checks the files loadind and arrive at 31% and just stands at 31% and does not let him all night and he did not move I rebooted the prosess with the same results, is the notebook with a full format and it times out?

  thare is a way to have a quick format done, any help is welcome.

  Thank you

  chag62

  Hey Paul

  I have fixed, HP said that because I installed a hard drive bigger that the laptop came from the factory with the system disk is not word (suspicious) so I just gave up on HP, I'll never buy anything from hp!

  but the microphone has been a great help to get the corrected product code number.

  Thanks for your help, it was a bright light in a forest dark.

  The best for you and your family

  Chris

• Can Equium L40 - I change hard drive SATA to AHCI Mode?

  Hello

  Anyone know if it is possible to change the hard drive to SATA AHCI (or same IDE) mode in the BIOS?

  I see the hard drive in the BIOS but I can't select to make changes as long as it is "gray".

  I installed the latest version of the BIOS, but that made no difference.
  Thank you very much.

  I put t have this model of laptop, but usually the controller SATA in BIOS mode options are AHCI or compatibility.
  I presume that it is set to AHCI.

  Your laptop's SATA HDD so I put t understand why you want to change anything. Using the AHCI mode HARD drive can operate at full speed.

• Portege 3500 - change HARD drive and deal with overheating CPU

  I recently bought a Portege 3500 without any support of discs etc. It doesn't have a CD or a floppy disk. It has 2 problems, I want to trouble.
  (a) HARD drive is obviously out because it is by clicking on me, and it presents a permanent red section during defragmentation.
  (b) the fans are at full power all the time, and the CPU is running slowly.

  (a) I had a new HARD drive that I reformatted on other laptops. I put a base Windows XP on this HARD drive and uploaded on my external that I attach to the Portege. I used "transfer... Assistant "to transfer files, folders, and settings to the new HARD drive but I don't know how to install the old Windows XP OS Tablet it." I have the product key of Microsoft for the operating system. Any suggestions would be helpful.

  (b) I believe that the transfer of heat from the CPU on the radiator is a failure, causing the processor to hot and therefore slows down. I already solved the same problem with a Dell by coating the top of the CPU with Artic Silver 5 paste. I cannot, however to get the CPU in the same Portege so I removed all the screws down. Does anyone know how to split the case without causing damage?

  Hello

  (a) Unfortunately, but I don t really know how you want to install the operating system without using the recovery CD or the windows CD.
  I searched a bit in this forum and found these messages on the installation of the OS on the Portege 3500:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5926
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15336&MessageID=55939

  See also this FAQ:
  http://support.toshiba-tro.de/KB0/TSB6101CA000ER02.htm

  (b) on the Portégé, you should find the power saver utility. This utility allows you to change the different modes of cooling and processing speed.
  In my opinion, you should also check if the fans are clean. Especially the dust and debris inside of the laptop is responsible for cooling not properly of the CPU and other parts.

  But if you want to know how to remove the covers so I would recommend checking this site. Maybe you'll find something useful.
  http://tech.irisvista.com/laptops/Toshiba4010/portege4010_1.htm

• Guaranteed - just change hard drive on the Satellite A100?

  Hi people,

  my girlfriends A100-407 shows really bad cluster errors in Microsoft scandisk, the indexer service research plant always shortly after startup. The laptop is about 23 months, so this should be a matter for the guarantee.

  Because she really need the laptop for his study, I thought to simply by changing the disk hard so that she can use the laptop again immediately after reinstalling windows. Is it possible to send just the hard drive damaged in replacement?

  Thanks for the help!

  The best way would be if you go to a local ASP and ask them.
  They can order a new HARD drive and maybe you can get the defective HARD drive and take a new.

  Of course, you can change the HARD drive by yourself if you wish. You will not lost the warranty if you change the HARD drive.

• Satellite L635 change HARD drive

  Hello

  I would like to change the hard drive of my laptop. So I use the recovery DVD to install the system on the HARD drive. Everything seems OK but after a while I have an error message when starting services:
  "Windows cannot end up installation. To install Windows on this computer restart the Setup program. ».
  And I'm in a recurring process at this stage.

  Thank you for your help.

  It is really strange. I have installed many times recovery image, but I've never seen this message.

  Can you please do a pic and post it?
  What HARD drive is now inside?

• change hard drive (old was broken) I have no more CD recorvery

  My acer laptop 1350, hard drive ash bin change (age had broken bin) i 'don' t have cd recorvery more, how can I recorvery laptop

  How can I do

  Thank you

  Hello

  The only way to get it back as a PC to work directly from the facility, is to get Acer recovery media.

  If you can find/borrow XP CD of the same version (XP/Pro), you can get the operating system implemented using the button on the bottom of the laptop. Then, you have to go to the Acer Web site and download all the drivers and the software you need and install after having established Windows. This could be a situation ' chicken and egg ', without ethernet or wireless drivers that you will not be able to get on the internet. Windows might have native drivers, but if not, the only way to beat this would be for download on another PC that has an internet connection and then transfer by memory stick or other portable media. If you choose this route, you may want to you come back to this forum and research to get the XP installation instructions, this is particularly important if the CD is pre - SP3.

  Please mark this as useful or response if applicable.

  Tricky

• After changing hard drives, I get an error message that says: I need a full version disc windows genuine

  Original title: replacement hard drive configuration issue

  My hard drive crashed and I can't access anything anyone on this subject. I have a second hard drive that was used for additional storage only. I'm doing this second walk my master drive. After changing the cables, jumpers, the bios settings to show as the master I am using the Windows XP disk, I try to put in place. I get an error message that says: I need a full version disc windows genuine, not a disc to upgrade to. When I bought the computer it came with Windows ME preinstalled and there was no disk that came with the machine. When I went to XP apparently, I bought a version upgrade, not the full version. Is it possible to get a cd of microsoft, or download a file, which can help get this another hard drive mounting correctly?

  Thank you

  Jeff

  Hello

  Since you have changed your HDD, I would contact the Microsoft product activation center to get on your version of the operating system. Visit the link that provides the phone number of the same below:

  http://support.Microsoft.com/kb/950929

  See also: http://support.microsoft.com/kb/811224

• After changing hard drives on my Toshiba laptop, won't activate Windows Vista.

  I have two laptops Toshiba Satellite, I bought new. Due to hardware failures, I changed the hard drive of a laptop in the other. Everything works fine, but now the Panel / System states that I have two days until automatic activation. He also said whenever I try the option activate the invalid product key! The Microsoft product Authenticity sticker is more readable on the laptop where the hard drive was born. In question operating system is Vista Home Premium 64-bit. Help, please!

  original title: activation problem?

  You can buy a full license of Windows 7 and install it, but make sure that your computer meets the Windows 7 system requirements

  You need a qualification license Windows to upgrade; you don't when you moved the hard drive.

  You don't say what the problem is with the hard drive of the laptop you are trying to install this hard drive Vista preinstalled from the other laptop in.

  If you bought them at the same time, two thay have Vista Home Premium on them?

  Why not use this laptop you try to go there and his original hard drive, if still OK.

  If its hard drive is not OK > you can then put this "non-genuine" hard drive in it > reinstall the correct version of Vista that is pre-installed on the notebook computer > then purchase an upgrade to Windows 7 If you wanted to.

  One of the posters put this Information in place in the Forums:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/FAQ-common-Windows-7-installation-questions/6719ae72-7187-45CD-80f7-55e66f3ec686

  And most importantly make sure that Toshiba has Windows 7 drivers available for your model laptop activate Windows 7 works correctly.

  See you soon.

• Change HARD drive on a laptop computer brand new - is warranty still valid?

  Just ordered a new HP envy 17-J008eo laptop for bikes.

  I want to chage the harddrive provided on a SSD hard drive and now I wonder about the Finland HP warranty policy, Europe - should it be cancelled if I change the HARD drive? (planning on ordering extended 3 year warranty as well)

  Hello

  According to my understanding, that you do not want to install SSD drive on the Unit came while the SDS disc is not covered by the HP warranty & if you need to service your unit, you may need to install the Orginal drive which as well as unity.

• Change HARD drive can always use recovery disk to reinstall Windows?

  I have a HP dv7-4296nr, partition recovery and recovery disks. Now, I want to change the current HARD drive to the new HARD drive. But I wonderring after I change the HARD drive, can I use the restore disc I burned before reinstalling windows?

  Hello

  Yes you can.  Your existing set of recovery disks will not only install the operating system on the new hard drive, but will also reinstall all of the original software that came with your laptop as well as re - create the Partition D of recovery on the new drive.

  Kind regards

  DP - K

• Change hard drive - how do I reinstall Windows copy on the old drive?

  I intend to change my old hard drive to the laptop with a new one. Windows Vista comes with the old drive, how can I move to the new? Copy + paste does not work completely. Thank you!

  Hello

  There are different ways to do

  hard drive manufacturers will normally provide the cloning software to move your operating system installed from the old to the new hard disk

  Search for information on this subject on their Web site

  If you have vista business or ultimate, you can use the builtin vista complete PC Backup to move

  read the information below

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  or if you have vista home version you'll need 3rd party software

  link below is an example of this:

  http://www.Acronis.com/homecomputing/products/TrueImage/index.html

  also to put your machine how you bought:

  1. that vista is preinstalled, you should have a recovery on your old hard drive partition

  You can recovery disks to reinstall on your new hard drive

  ask the manufacturer of the machine how

  2. contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  3. or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above