Re: Magenta/Purple mount screen Satellite Pro C660-2JR

Similar Questions

• Satellite Pro C660-2JR - wifi is not connecting

  Hello

  I just bought a laptop Satellite Pro C660-2JR for my daughter, the unit works fine on lan cable, but not connecting not wireless.
  Wireless indicator shows an intense tone, but when I click on connect after that 10 seconds, it says connected failed.

  The network settings are correct (I checked with two other computers that connect without problem), the pc is running x 64 win7. on the toshiba site there is no drivers listed for the local network, I downloaded and installed the drivers from realtek realtek Web site, but no difference.
  Is this a problem with x 64?
  I've tried the recovery disks

  Can anyone help?
  Thank you

  Rob

  On this virtual path, it is not easy to say what the problem is, but there must be a problem with the WLAN settings I guess. What else? Your laptop can detect your router. Question is: what router do you have, what WLAN standard do you use, and you have WIFI password or not.

  Have you tried to reboot your router and check again?
  When you unlock your router you have the same problem?

• Creating discs of recovery for Satellite Pro C660-2JR

  Hello

  is there a way to have the recovery disks installed win7 x 32 instead of x 64 (Satellite Pro C660-2JR)

  If your laptop has been delivered with the 64-bit version, you can create the recovery for this preinstalled only version disk. With other words, saved on the recovery partition recovery image is recorded on DVD disc. It's nothing more than that.

  If you want to use the 32 bit OS, you must check if your phone model is supported for him and install the clean version.

• Satellite Pro C660 does not start, no screen

  Hi guys I was wonder if anyone could help please.

  I have a Toshiba laptop Satellite Pro C660 - 2 DR who seems to be defective (just out of warranty).
  Everything worked fine until we came to a morning market and found that the screen remains off (black screen). There are no output through the VGA as I tested it on an external monitor.

  The CPU fan turns for a few seconds and then turns off.
  There is no noise from the hard drive read/write either. The power light stays on. I removed the hard drive to access data on another system that worked Fortunately

  . I also removed the RAM, battery and optical drive, but there is still no output to the screen.

  Is it sounds like a faulty motherboard?
  The laptop seems to be in excellent condition.

  Is there something else I can try please? I would be very grateful for any advice.

  Rich

  Yes, it looks like the faulty motherboard or a part of the motherboard as RAM or CPU.
  You said that you have already removed the RAM, but have you used a good RAM module tested?

  Theoretically, it could be just a problem of RAM but in the worst case, you will need to replace the motherboard and I think it would be really expensive repair.

• Need cable to screen for my Satellite Pro C660 2JD

  I tried to find a Satellite Pro C660-2JD display cable for several months now with absolutely no luck at all... I even tried to display the C660 series cables and none of them seem to match, there seems to be it's own cable.

  Anyone know where I can find the display for this model of laptop cable? Any help will be greatly appreciated.

  Thank you

  It is quite difficult to find these parts. When I need something I look for on eBay. With a bit of luck, you will find many parts for models of different laptops.

  Have you tried to contact the nearest Toshiba service provider and ask if they can get this cable for you?

• Satellite Pro C660 graphic needs driver upgrade for Adobe Lightroom 6

  I tested 5 Lightroom on my Satellite Pro C660 and it worked fine.

  I decided to do it, and that week Lightroom 6 came out, so I bought Lightroom 6.

  LR6 gets to the start screen, then stops and closes the Windows7.
  I contacted Adobe and they went on my machine and identified the problem as being the graphics card and says I need an update of the driver.

  I've been on the Toshiba site and it says that the latest driver is 8.15.10.2189, which is the one I currently have (and was changed in 2012).

  I've been on the Intel site and their obtrusive says that the machine has a pilot custom then contact Toshiba.
  I looked around the Intel site and tried to install that seem to be plausible drivers, but have not found one that would install.

  My installation includes a monitor LG 22 "connected to the laptop with the spread of the desktop on both screens (laptop and monitor).

  No one knows what would be the upgrade of the driver I need or how can I know?

  James

  The page Intel graphics driver can be used, and you can also download the driver directly from the page.

  This CPU does support your laptop?
  What Intel GPU (Intel HD graphics chipset *) is the support of laptop?

  The Intel download page provides a driver Intel as an exe or zip package
  https://Downloadcenter.Intel.com/

  You need to download and unpack the zip package.
  You will then be able to update the driver in Device Manager, choose the Advanced installation update procedure.

• Keyboard stopped working on my Satellite Pro C660 2JD

  Hello world

  I have a Toshiba Satellite Pro C660-2JD.

  The keyboard has stopped working, it only works when the keyboard screen is selected as soon as I close the screen keyboard that it stops working. I plugged another keyboard that doesn't work or only works of the mouse and the keyboard on the laptop works ok. I used the Ubuntu live CD, and the keyboard works with it, but not in windows.

  I have restored the laptop to factory settings and also make a clean installation still does not work only when the screen on the keyboard keyboard works. Does anyone have any ideas of what is the problem? It seems that something prevents the loading keyboard driver.

  Krones

  Start your laptop and enter the BIOS settings. Keyboard works in BIOS mode?
  Have you tested using \Windows in "safe mode" (F8)?
  Please test and send feedback.

• How to uninstall Windows 7 Home Premium to my Satellite Pro C660?

  Hello

  I recently received from Toshiba Satellite Pro C660-1 t 1 that I have Windows 7 Home Premium. Now I want to uninstall it and load windows XP on this...

  I have removed Toshiba HDD protection prgram and try to boot the XP cd... His going up to the installation of windows XP and I get a blue screen.

  Could you please help me how to uninstall this...? I'm bit desperate your help greatly appriciated

  Thanks in advance.
  Dietsch

  I assume that you are missing the driver SATA.

  Please check this forum using the advanced search option. You will find hundreds of discussions where you can read how to install Windows XP Home edition on the newer model laptop.

  BTW: create recovery DVDs before you begin to install own OS.

• Satellite Pro C660 - restore to factory settings

  Hello.

  I have a Toshiba Satellite Pro C660.

  I have some problems with this computer and I intend to sell it.
  I want to set the computer to how it was when I took it out of the box.

  I read a lot of popular advice on that. I tried holding 0, which do not work. I entered in the system by pressing f8. I get a screen when I get options on what I want to do with my computer, but it is not an option that allows me to look again at 'out of the box"State.
  What I read, this option is supposed to be here.
  I have no restore disk as laptop did not come with one.
  I am running to options

  Can anyone help?

  Thank you

  Laura

  Hi Laura

  What you want to do is HARD recovery disk image installation and it works as described in the
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  To be clear: this works if your laptop is always the factory settings. If your laptop is preinstalled with the clean version of the OS option repair your computer will not be available more.

  Problem is that this situation can be avoided if the owner of the laptop has created the installation disc of recovery following the instructions described in the user s manuals document. I presume you didn't create this disc.

  Now, there is only one option to get the original on your machine settings: you need to order the original disc of recovery for your laptop model and you can do it on https://backupmedia.toshiba.eu/landing.aspx

  Or you can remove all the important data of your machine and sell with actual configuration.

• Satellite Pro C660-1J3 - problem with OpenGL / Edrawing

  Hello

  I hope you can help me with the following problem:

  I need to work a program that we OpenGL for drawing, but still the program does not work if it opens the drawings, the following information, always on the screen:

  "OpenGLView: EnableRenderContext failed" and the stop-work program.

  So I dry to update the driver grafik, but it does not work. I found a thread on this forum, but http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67241 his looks.

  I am at the part:

  Thank you, useful, but still having problems. I downloaded "Intel® Chipset Device Software (INF Update Utility) v 9.3.0.1019" and installed it the way you say, but the computer says I'm already under the latest version of the driver, which the computer is 8.15.10.2622. I'm running Windows 7 x 64 Home Premium. I can't forget the old version and use the new version.

  I don't really know the command SETUP-OVERALL, where I can find this command...

  Please help me, I need the program to work!

  Computer laptop-type: Satellite Pro C660 - 1J3 PSC0RE and I we Windows 7 Professional 64 bit

  Thank you alex
  PS Sorry for my English ;)

  Post edited by: alexk

  Hello

  I think the drawing application needs the graphics driver that supports OpenGL.
  To my knowledge, the driver of the Intel page should already contain the OpenGL.
  The Satellite supports graphics Intel HD (Intel HM55) so I think that you should use the driver from the Intel page, even if the update utility indicates that you are using the latest driver.

  I think that you need to uninstall the old driver through the Device Manager.
  In addition, check whether it should be uninstalled in the control panel-> software.

  Then download the latest driver for the Intel HM55 chipset, and install it via the Device Manager.
  You do this by using the Advanced installation procedure that will force windows to select the driver from the driver's record, that you have downloaded from the Intel page.

• Satellite Pro C660 - 24 k: Webcam/Microphone and interface issues

  I went on Skype to talk and I found that it could not detect a webcam, and the other person couldn't hear my voice. I checked Device Manager and no imagery or recording device has been found.
  The camera and microphone are integrated. They have worked before.

  There is another problem that may be related. When I got the laptop, when I pressed the fn key, a bar at the top of the pop up screen would be who showed me what did all the various f keys. It no longer appears.

  Also, when I got the laptop, if I plug headphones or an external mic into the line out Sockets, a pop-up message would be. In this case no longer, and the laptop is not receiving any input headphones I plug into it.

  I tried to reinstall the drivers of webcam, but in vain. According to Device Manager there is no. If this were the only problem, so I can put down to damage, but other problems give me a feeling it has something to do with a kind of software can I have accidentally disabled or deleted, which exercises control over the webcam/mic and the line output, which also produces pieces of UI such as the fn key.

  I can't identify a moment when it stopped working I barely noticed the webcam and the microphone does not work as I them haven't used for a while. I noticed, however, how pressing the "fn" key is no longer shows the respective information on the screen.

  Model: Toshiba Satellite Pro C660 - 24 k
  OS: Windows 7 64-bit

  > There is another problem that may be related. When I got the laptop, when I pressed the fn key, a bar at the top of the pop up screen would be who showed me what did all the various f keys. It no longer appears.

  The menu of the FN button that appears just by pressing the FN key combination is controlled by the Support of Flash memory card utility.
  Try restarting this software located in all programs > Toshiba-> Flash Cards

  If this does not work, reinstall the Support of Flash memory card utility.

  > Also, when I got the laptop, if I plug headphones or an external mic into the line out Sockets, a pop-up message would be. In this case no longer, and the laptop is not receiving any input headphones I plug into it.

  It seems that the laptop supports the Realtek audio chip. That is why the Realtek HD audio Manager must be preinstalled and placed in the Panel.
  Go to the dashboard-> Realtek HD audio manager
  In the upper right corner, there is a small yellow folder called "Connector settings" in my version.
  There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged.

  I m not sure about the question of the webcam... perhaps that the system is confusing the Skype upwards and face recognition software uses the same cam then perhaps you should uninstall the software for the webcam, Skype and a face recognition software and must restart the laptop. After the software installation of webcam, facing new to Skype and recognition software.

• Satellite Pro C660-29W. How to remove the supervisor password

  Hi all
  I've been locked out of my bios and I don't know the password. My little brother was playing with my laptop computer and accidentally set the supervisor password. Is it possible that I can recover the password or reset it? I really need to change my boot sequence as I just bought a new SSD and need to format my laptop. Suggestions will be highly appreciated.

  Here's my version of bios and details of laptop

  Toshiba satellite Pro C660-29W

  CPU Intel Core i5 2410 M

  8 GB Ram DDR3

  BIOS: BIOS FRIEND - installation utility Aptio
  BIOS system ver: 1.50
  THIS Version: 1.50

  Thank you

  Supervisor password is very important safety device and a kind of reset of the user is not possible. You can cancel it, but you must know the correct password to confirm that you are the real owner computer laptop.

  Toshiba provider in your country can help you with this. You just approve that you are owner of the laptop, and they can cancel it for you. Of course, you must pay for it.

  As far as I know, there are several techniques for the removal of password and it depends on phone model.

  Contact the closest Toshiba ASP and ask for help.

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Satellite Pro C660-1LR - new HARD drive but no recovery disk

  I need help for my son who is the Satellite Pro C660 1LR laptop.

  In this portable hard drive is completely dead, I have not created a disk of recovery for this system of portable computers.
  I bought a new hard drive that is installed... However, as you guessed it I have no access to reinstall an OS, this laptop works on windows 7.

  I'm not really tech savvy so if someone can advise me please do explain to the fool proof format! I try to avoid having to buy something expensive.

  > I'm trying to avoid having to buy something expensive.
  Problem is that you don't have many options in this regard.
  If you want to have the factory again settings you must install recovery disc. You can order on https://backupmedia.toshiba.eu/landing.aspx of course is not free, but, in my opinion, without a doubt the best solution.

  You can buy the Microsoft installation disc and install the clean version. You must purchase a valid license for it.
  In this case, you must install all the necessary drivers, tools and utilities for more than one by one.

  Just in case you can get this installation of Microsoft and the free license you can save money.

  Believe me, the best solution is the original recovery disk command.

• Satellite Pro C660 - keyboard problems

  This issue is one for computer laptop Toshiba Satellite Pro C660-1UX running Windows 7 Home Premium Service Pack 1.

  Some of the keys on Board (E, T, U, I, O, A, B, N, and the Enter key) fail to register.
  All keys tested so far seem to register normally.

  When you connect an external USB keyboard, all the keys work properly. When you use the integrated keyboard or external USB keyboard, however, pressed some key is selected for about 2-3 seconds so that his character register. This makes typing incredibly slow and is naturally unacceptable.

  I checked the Manager of devices looking for errors, but can't find one. The keyboard driver is classified properly installed and functional, and driver update indicates that the latest version is in already in service.

  I've also scanned for viruses using Spybot and Malware bytes and also with laptops own antivirus software pre-installed. All the analyses of the entire system refer a none found the message of threat.

  I read that the keyboards on these machines can sometimes be problematic, which could respond only to edge, some function keys. The fact that all the external USB keyboard keys work seems to confirm this. However, the fact that the keyboard both onboard and external is affected by the same slow pressure might also suggest a bios problem - but that this laptop computer is several years old and working perfectly, why bios suddenly would cause this problem.

  I visited the Toshiba site and based on this laptop with the part number: PSC0ME-02100SEN, I have concluded (rightly or wrongly) that the correct bios download version is 1, 70 - WIN, only when I read the following installation instructions http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm bios
  I became quite concerned, like installing the bios update seems far from simple.

  Does anyone know if it is possible to download and install the bios right through an update automated versus manual download and installation step by step, which, if not carried out as planned, could make the laptop completely unusable.

  Has anyone reading this post experienced similar problems with this make and model laptop and was able to return successfully to the good operating condition. If so, how?

  All constructive advice would be welcome.

  > When you connect an external USB keyboard, all keys work correctly.

  This means that the keyboard controller is OK and the internal keyboard is defective.
  To resolve this problem of keyboard, internal keyboard needs to be replaced.

  > However, the fact that the keyboard on board as external is affected by the same keypress slow could also suggest a bios problem - but this laptop computer is several years old and works perfectly, why bios suddenly would cause this problem.

  Hmm I n t think so
  The keyboard delay can be bound to parameters.
  You can check this in the control panel-> keyboard