Re: My Satellite A500 starts with error message

My computer laptop satellite A500, after this startup and windows open, a message from the Update Manager "error #-5, I wonder what that might be.
My operating system is Windows 7, 32-bit 4 GB of Ram.

Can anyone give me the solution for this error?

Hi jun07,.

Who Update Manager you mean exactly?
I think that a screenshot would be very useful in this case.

If you mean the update of Windows, you must check for Windows updates again and check if the updates will be installed.

Tags: Toshiba

Similar Questions

  • Satellite U940 starts with error message after BIOS update

    Hello, I have apologizie for my English, I know that's not the best...

    I made a mistake very stupit, and now I can't use my new U940 satellite - 103.
    I updated the BIOS from version 1.2 to version 1.3.

    Unfortunately, I did not have any recovery media (I'm stupid, yes!).
    When I turn on the ultrabook, he said:
    "Your PC need to be repaired.
    error 0 x 0000001
    Does anyone know what I can do, please?
    THX

    Hmm you see a Toshiba screen when starting?
    Are you abele to access the BIOS?

    If this isn't the case, I guess something was wrong during the update and you will need to request the service in your country to fix.

  • Satellite A110 starts with error message "PXE".

    I saw something on the internet that I usually look on the web address www.datemule.com I think, and I think without doing something new my laptop started to reboot and then pops up this message:

    INTEL UNDI, PXE - 2.1 (build 082)
    Copyright (C) 1997-2000 Intel Corporation

    For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
    PXE - E61: Media test failure, check cable of
    PXE - M0F: Exit PXE ROM

    INTEL UNDI, PXE - 2.1 (build 082)
    Copyright (C) 1997-2000 Intel Corporation

    For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
    PXE - E61: Media test failure, check cable of
    PXE - M0F: Exit PXE ROM

    what it means? Please help me to solve it!
    I look forward to your reply! Thank you!

    At first, I must say it's really strange that something like this happens so suddenly. It seems that your laptop can not find the HARD drive as a boot device.

    Start please your laptop, then press F2 to enter the BIOS settings. Check it please on the first page if the HARD drive is recognized and registered correctly. If Yes check it please boot option in the BIOS and don't forget HARD drive is set as the first boot device.

    Please post some info on the status of the BIOS and the HARD drive.

  • Satellite L300 starts with the message "JCQFX is compressed.

    I have a toshiba satellite l300 and worked very well until it turns off, when I turned on the computer laptop back it came with the message
    JCQFX is compressed
    Press the keys ctrl, alt and del to restart
    I did it but it keeps going back to the same thing, please can someone help me I am at my wits end and trying to monopolize my laptop girls thank you in advance x

    Hi the Welsh,

    Never heard about this error message then I asked Google on this subject and that therefore say: also no information :(
    Very strange

    So, step by step:
    Do you see the same behavior when you start Notepad (Windows) in safe mode?

  • computer HP Pavilion laptop starts with error message disc 1 failed with code 301

    I have a HP Pavilion laptop dv6 - 6033cl running with Windows 7.  In the last days, it starts with the error message: "Test Drive: 1.

    SMART check failed

    Failure ID: RU3TRQ_5KK6PJ_MFH14J-60BE03

    Product ID: LH597UA #ABA

    HARD DRIVE 1 "

    When the computer is running in normal mode, bodyguard Windows sends messages saying that it detects recommeds and failure of disk 1, I perform the backup.

    This computer is more than 2 years old and is more under warranty.

    Can someone, please.

    Thank you very much

    Your hard drive is dying quickly and must be replaced. If you have not burnt the recovery discs again I'd get burn soon or you will have to order from HP. You will need to boot and install Windows when you put the new drive in.

    Burning discs of recovery HERE

    Example of hard drive HERE

  • Re: Satellite L850 - Toshiba system settings utlity starts with error message

    Hello

    I had this problem for months and I'm sick and tired with her...
    Whenever I try to start the configuration utility, I get the following message: Please install Toshiba system driver first.

    I have all the drivers, and they are all to date. I use Windows 8 on my Toshiba Satellite L850 1kt. I also tried on Windows 8.1 and it has the same problem. In addition, it is impossible to uninstall the system configuration utility, it gives me the following message: Setup has intterupted.
    Andrew

    Stand by. According to specification for laptop, your laptop has been offered with Win8 pre-installed 64 bit. When used with the factory settings, everything should be OK.
    > I use Windows 8 on my Toshiba Satellite L850 1kt.
    Do you use original Win8 that you got with your laptop or your own version? Original version is tested and should work properly. Have you changed anything or removed from the system?

    Reinstall if possible original version of the OS (recovery image) and I m sure that everything will be OK.

  • Recovery procedure starts with error message - Satellite L10-333

    Two problems really

    One of my CD / DVD player plays up.

    I can't record dvd had / CD on this subject.

    However, I can watch DVD / CD on this subject.

    I tried different brands on CD but does not resolve it.

    So I decided to restore my computer to default to see if that fixes however I get the message

    "RECOVERY".
    MACHINE TROUBLE!
    THIS SOFTWARE IS DESIGNED FOR TOSHIBA PERSONAL COMPUTERS. "

    and it wont let me restore default settings

    Any help much appreciated

    Andrew

    And you use recovery media delivered? Is - the first time you try to use it?

  • Re: Recovery DVD tool starts with error message

    Hello.

    Can someone tell me why when I run "create a dvd recovery tool" message appear with "cannot find the partition recovery...". » ???
    It's a whole new Satellite A660 - 1 c 3 bought and opened today.

    This happen if the recovery image is removed or deleted.
    When you buy the new model of notebook and start for the first time preinstalled image must be installed first.

    So if you are capable of operating system pre-installed usage it means you had a notebook with the recovery image on it. I put t know what you did but fact is this structure partitions or the backed up data are changed.
    Have you changed anything in the tool of management of disk (develop partitions, change the ability of the partitions)?

  • Satellite A200 starts with the message "missing operating system".

    IM wondering if anyone can help... I have a Toshiba Satellite A200, who, at the start, just comes up with a black screen and the "system of missing operating" in the upper left corner.

    I looked for solutions on the net. Nothing is really done. I tried to start in safe mode using the F8 function key, but it did not work. I tried to boot from a vista recovery disk. That did not work. I tried to reinstall vista and it came just with the error 0 x 80070002. Im stuck and don't know how started it in safe mode so that I can transfer data and then reinstall vista (reimage) on this subject.

    Can you make suggestions?

    Hello

    Have you tried to get into the Bios and check if a hard drive is recognized? If not, the hard drive no longer works. If so, try to make another copy of Windows disk.

  • Satellite A200 starts - PXE error message

    Hello

    I have a Sat A200 woo.
    The problem started when my phone froze when I download something and I turned it off using the power button.
    But now when I turn it on it comes up with this execution environment (pxe) boot before and continues to say that the media are missing and check the cable?

    Can someone tell me how to fix it

    Thank you

    Hello

    You mean this message?

    + PXE - E61: Media test failure, check cable.
    + PXE - M0F: exit Intel Boot Agent. +

    This means that the operating system is not found possibly the HARD drive is dead, or the operating system has not been installed correctly.

    I recommend to check first if the HARD drive is seen in the BIOS. If it isn't then you should replace the HARD drive and should reinstall the operating system.

  • HotSync fails to start with error message

    I'm on a Palm Tungsten E2 on a desktop and a laptop with Windows XP Professional: I regularly Hotsync my Palm on the two, always selecting 'no action' for the system. Unfortunately the last time, by mistake, I chose for this option "Desktop replaces Palm", and, since then, Hotsync does more: pushing the Hotsync button I immediately get the message 'SystemMgr.c, 4038 Error launching application online. The reset button does not solve the problem. Same launch Hotsync in the Applications Launcher. Data on the Palm are unchanged and everything works very good about it, but I can't sync more wiyth my PC.

    Any suggestion? Thank you

    I just paid how to solve my problem. In my post, I said that Reset did not help. I should have specified that reset "smoothly" did not work. I did a Hard Reset, removing all the data on the Palm and Hotsync now works perfectly. I recovered all the data from the Dekktop.

    Thanks for your inquiry.

  • Satellite L650 starts with error 0xc00000e9

    Spending hours finding aid, but none seem to solve my problem.

    When I turn on the laptop it lights up as normal but does not load the logo toshiba or anything after that, if I leave it will have windows loads, then implement the code error 0xc00000e9, I tried to use the f8 key to restore the few that it does not work, I tried to take the battery method, but that doesn't work either.

    Laptop is very hot below don't know if this is useful, once on the screen error code if I hit the continue wil just repeat the process of return error code onscreen.

    Any thoughts what I please

    Just to add it to load the toshiba logo, then goes to windows load the files stay on it for a few minutes then go to the oxc0000e9 error

  • Satellite A350 - blue screen with error message

    At the start of windows7, I get a blue screen with error message 0 x 0000116.

    Can someone help please?

    It looks like a graphics driver is a troublemaker. Try to reinstall a graphics driver in SafeMode (f8 at startup). Read this article for more information:

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/eb584685-6b8b-4ad7-B6CC-ae5ee78095fb

    It is for VISTA but should be the same for win 7 too.

  • Cannot open the Windows Gallery with error message: "you may not have enough space on your hard drive or critical files may be lack of Windows.

    Original title: Windows Photo Gallery problems

    I have a problem trying to open Windows Photo Gallery, when I click on the program tab I get an error message saying: Photo Gallery cannot start. You can have enough space on your hard drive or critical files may be lack of Windows.

    • NO Mahesh B G , is not windows live photo gallery, windows photo gallery & is the message I get "could not open the Windows Gallery with error message: 'You may not have enough space on your hard drive or critical files may be lack of Windows'." Thank you Dave 07/11/2012

    Hi David,

    1. have you made changes on the computer before this problem?
    2. are you referring to the Windows Live Photo Gallery?

    Please follow the methods and mark the question below:

    Method 1:

    Fixed problems with Windows Live Photo Gallery that does not:
    http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

    Method 2:

    You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

    To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

    I hope this helps.

  • Firefox does not start, no error message, only works in the background

    I click on Firefox it does not start
    no error message it does not start
    It works in the background in 32-bit
    I have re installed it but nothing changes

    It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

Maybe you are looking for