Re: My Satellite Pro P300-19 q there Firewire 400mbps, 800 or 1600?

Similar Questions

• Satellite Pro P300: external resolution 1024 x 768 instead of 1680 x 1050

  Hello

  I run my Sat P300 on XP and this laptop screen is fine (1440 x 900 pixels on radeon HD 3650).

  Now, I want to connect the laptop to an external monitor flat screen, a Samsung, which requires an optimum resolution of 1680 x 1050 pixels.
  The samsung monitor works fine on my laptop more old: I close the lid of the laptop and the screen changes to the Samsung with good resolution of 1680 x 1050.

  Now, when I connect the P300 and close the lid, the screen switches to the Samsung, but the actual screen resolution is 1024 x 768, despite the fact that the 1680 x 1050 is set in the display properties windows.
  In fact, the screen is probably 1680 x 1050, but sees only the monitor 1024 x 768 (i.e. the desktop is bigger than the monitor can show, and I can push the office left/right or up/down with the mouse.

  So it appears (Hey, it's just a guess) that the radeon sends a screen 1680 x 1050 with the wrong frequency (48.2 KHz instead of 64.4 KHz as my monitor watch)!

  The Samsung drivers are installed, and I've updated the BIOS to 3.40 win, but not a solution.

  Someone at - it an idea?

  Hello!

  Have you checked the manual of the Satellite Pro P300?
  I think you should do this because there you can read why the screen resolution of 1680 x 1050 doesn t work.

  The Satellite Pro P300 supports the following screen resolutions:
  800 x 600
  1024 x 768
  1280 x 800
  1280 x 1024
  1600 x 1200
  1920 x 1440
  2048 x 1536

  Do you not see where is the problem? ;)

  Good bye

• 2nd HDD on Satellite Pro P300

  Hi all can anyone tell please how to add a 2nd HDD satellite pro p300-180, given that a space inside

  Remove the cover for the second HARD drive and check if there is the HARD drive connector. If so you can put there second HARD drive. I did the same thing on my old P300.

• What RAM is compatible with Satellite Pro P300?

  Hello

  I have the Satellite Pro P300 (PSPC1E - 002002GR).
  What are the specifications of the RAM?

  Currently, there are 2 GB of RAM
  I want 4 or 8 GB of RAM.

  I have this possible?

  Greetings

  You can upgrade the RAM to 4 GB of RAM
  So you can use additional DDR2 667 MHz 2 GB RAM module (i.e. PA3513U-1M2G).

  Specifications are:
  DDR2 SODIMM 667 Mhz PC2-5300
  Pins: SODIMM 200
  Voltage: 1, 8V

• Satellite Pro P300 - update graphic card and CPU

  I have a Satellite Pro P300 and I was wondering if the CPU or the graphics card can be improved?

  I really like my laptop, but an upgrade is imminent and before I take the plunge I just want to see if it is all options other than a new laptop.

  Hello

  Processor and graphics card update is not supported and there is no list with compatible processors. If everything is on your own risk. In the worst case a new processor will not be recognized from the motherboard or BIOS, probably you need a new module of cooling too so I wouldn t this

  In addition, the graphics card is attached to the motherboard and cannot be exchanged.

  => [Can I upgrade the CPU, graphics card or motherboard in my Toshiba laptop? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=13]

• Restore CD for XP in combination with double HDD on Satellite Pro P300

  On my Satellite Pro P300, there are two hard drives, two 160 GB.
  Currently, Windows Vista Professional is installed, as it was preinstalled.
  On the first disc, there are 3 partitions, an EISA partition, a partition to boot Vista and a partition for HHDRecovery (contains the image for Vista product Recovery).

  In Vista, there is an option for backing up the computer. This offers the ability to completely restore Vista to the situation at the time of the backup.
  I did a full backup the first complete hard drive (partition 3) PC and saved on the hard disk of the second.

  Now, I want to use the recovery provided product Toshiba for Windows XP to install Windows XP on the laptop.
  I guess that the first hard drive will be completely crushed, but I don't know if the second disc will also be replaced.
  Does anyone know if my data on the second drive will be lost when using the product for XP Recovery?

  I want to keep the data on the second drive, because it gives me the option to restore the laptop to the situation with Vista without reinstalling/activate applications.
  Also all my personal files are on this drive.

  I doubt that installing XP should touch the 2nd HARD drive, but for peace of mind, you can temporarily remove the 2nd HARD drive before installing XP.

• Satellite Pro P300-1F1 - mounting additional HARD disk

  Hello

  I'm hoping to add an extra hard drive to my satellite pro p300-1f1 laptop. I know that he has an extra compartment and it has a sata connector, so I know it's possible. But I need a support or mount or a caddy/adapter to the hard drive in place of the crew. When I contacted the Dutch Office of toshiba, they said that they did not support it and do not have this part. And the manual of the user on the site Web there says nothing about this compartment.

  I hope that one of you may know part whitch I need (the second compartment of the hard drive need to another mount/support/caddy/adapter then the hard drive that is already installed.

  I live in Holland, so no response with the Dutch dealers or websites would be great but uk / us is also appreciated.

  Update: here are some photos I did inside the compartment. Maby he helps :) ([Fig 1 | http://img690.imageshack.us/img690/8240/dsc01104h.jpg]) ([photo 2 | http://img39.imageshack.us/img39/585/dsc01102s.jpg]) ([photo 3 | http://img249.imageshack.us/img249/2536/dsc01101l.jpg])

  Hi Thijsm,

  If you have a second HARD drive connector, you can add a second HDD. But as you wrote, you need a shopping cart to install it.

  I put t know you contacted exactly, but on the Toshiba site, you will find a list of all ASP s:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Check this box!

  Post edited by: Xardas

• Satellite Pro P300 - no sound on Windows 7

  Hello world

  I had a serious problem with my Satellite Pro P300. I have all the drivers for download on the website of toshiba installed but I have no sound same with headphones. When I am playing music the spectacle of the sound icon he is read but any sound. I checked on a lot of Web site, forum and tested several drivers, but the problem is still there.

  Please help me before I go crazy with it.

  Hi faridas,

  I think that it s not easy to say and on Windows 7 I never had this problem, but maybe you need to turn the sound back on:
  http://APS2.toshiba-tro.de/KB0/TSB7C021B0001R01.htm

  In addition, check in Device Manager if the sound card is properly installed. Also make sure the BIOS version is up-to-date.

  Last but not least check the Windows sound settings!

• Satellite Pro P300 just died on me

  Hello

  Yesterday my Satellite Pro P300 (PSPC1E) died just the'm... no battery charging lights nothing. Nothing happens when I press the power button it is DEAD.
  The battery was ok last time used, the adapter is still give me almost 20volts.

  I took the laptop goes to check the DC in connector, it's ok.
  I guess that, after some research, it is a fault of the motherboard. In general my warranty missed 2 months ago!
  A new motherboard replacement so far here quoted costs £180, not too eager to pass that as I have a tax account at the end of this month!

  Any ideas of what could be the problem?
  I found a mobo on eBay which is a course of p300-1 to 8 for a song, but which would be compatible?
  What are all the variations in motherboards?
  Any other motherboard would be compatible?

  All ideas, suggestions would be much appreciated, and I thank everyone in advance for ideas.
  See you soon
  Steve

  I think motherboard is dead too. My brother had a similar issue when he wanted to connect the external HARD drive.
  Simply, there is an electro shock and from that moment the cell phone was dead. No reaction at all. Drive external HARD even was dead and it smells like burned plastic.

  Anyway, if you want to have the same hardware, you can buy identical mainborad of a PSPC1E model.

• Satellite Pro P300-25W - noise fan too heavy

  Hello

  I just got my Satellite Pro P300-25W and I hate the noise of the fan. Is there a way to make it less noisy race less often?
  I updated to Windows 7 and installed the drivers from the Toshiba DVD.

  In power options I selected everything to be optimized battery / record maximum power in the advanced power settings. But still, the fan runs almost all the time. I use Windows to surf a little, the CPU usage is very low (less than 10%), there is no 3D graphics movies or something goes on that would put fun on the GPU.

  It drives me crazy.
  I can do something, or should I just bought a laptop?

  I hope you can help!

  > Is it possible to make it less noisy race less often?

  There is an extra entry called Toshiba Power Saving and there you can change the performance of cooling module for battery or power mode.
  Usually, this should help

  But note; It depends on the internal temperature! Higher temperature means more rapid cooling modules
  It might be also possible that your cooling fans are full of dust and debris and prevents air circulation, remove dust and clean the fan using a jet of compressed air. Who helped in my case

• Satellite Pro P300 - output HDMI port does not

  Hi all

  Well it starts to drive me to distraction and Im hoping that theres someone who can put me out of my missery lol.

  I tried to connect my laptop (toshiba satellite pro p300) up to my LCD TV via the same HDMI cable that I use for my PS3 but the connector does not simply. I keep finding all these messages in various forums saying how they can't get the HDMI connection... that would be great, at least, this means that they were connected.

  Are there different links for the HDMI? The one I have is diagonal connector but the port on the laptop is more square and just doesn't fit. So, if it is not a connector, does that mean I have a funky port on the laptop.

  There is also the issue of connecting my laptop to my amp which controls the surround sound system. Which link is best to use, as there is no real connections audio output?

  See you soon

  Hello

  Can you please tell us what Satellite Pro P300 you have exactly? I mean the exact model number.
  Maybe you can also post a picture of the HDMI port. Normally there is no different HDMI port, all have the same physical size.
  I m PS3 not owner, but maybe he has a special connector. Have you tried another cable?

  Regarding the audio connection I use the normal line of output port to my external speakers. Have you tested this?

• Satellite Pro P300 - 18Q - upgrade to Windows XP

  My colleague is about to buy a new laptop Satellite Pro P300 - 18 Q and asks me to perform the downgrade it to XP.

  Are there instructions with the machine on the way to do it. ?
  I know that it comes with Vista and XP Professional as recovery on DVD media.

  Any information would be much appreciated. Thank you

  Hello

  If this laptop comes with Windows XP Home edition recovery media, I don't understand why ask you the next question. Your colleague can decide which operating system they want to use. If he wants to use the Windows XP using WXP home edition recovery media and install the Windows XP Home edition operating system.

  Someday, if he wants to use Vista, it can install it using sent Vista recovery image.

  I hope you understand what I mean.

• Satellite Pro P300 (PSPC5E) - driver Webcam open fail on Windows 7

  I installed the RC of Windows 7 64 bit on my Satellite Pro P300 PSPC5E and I have problems with the configuration of my webcam and microphone.

  I tried to install the Wizard software for the camera, 64-bit (windows vista) to configure the webcam but I get an error message with "Webcam driver open fail. Restart camera or computer.' nor a camera photo or computer restart the job. I get the image in Skype, but I can't change the settings or so (dark) and the microphone is much quieter, so it was on windows XP, it is set to its maximum.

  Is there a solution for this problem? I hope so :)

  Hello

  I think there is no solution for this problem at the moment, because you are using a Release Candidate of Windows 7 and at the moment there is no official driver for Windows 7.

  Have you tried the driver of Windows Vista so that s what you can do. Alternative visit you the Toshiba us page (http://www.csd.toshiba.com) and search for driver of Windows 7 beta. Maybe it works.

  Good luck! :)

• Satellite Pro P300 - how to get the original without media image?

  Hello

  I received a Satellite Pro P300 and there the for win xp recovery disk, I would go back to the installation of Vista pre installed if possible.

  The recovery on the hard disk partition is not available, so I guess, that it cannot be recovered. Is it possible to buy an original image?

  Liam is just that Win 7 is better than Vista OS.
  So if you have the ability to install Win 7 I recommend doing this instead of Vista.

  However, the Toshiba recovery disc contain only the Vista OS.

• Satellite Pro P300-19 q - DVD player is constantly trying to access a drive

  Hello

  I have a Toshiba Satellite Pro P300-19 q (PSPCDE-009005EN) with Windows XP. I'm having a strange problem where the DVD drive every now and then turns upward (flashing too) as if it attempts to access a disk. There is no disk in the drive.

  Any ideas?

  It is not easy to say why this is happening.
  As I see you are using Windows XP Home edition. Windows XP Home edition is installed as recovery Toshiba plant?
  Has noticed this problem with the factory settings and clean installed OS?

  Right now I can't imagine that it's a hardware problem. This read command comes obviously from somewhere. If some additional software may be responsible for this?