Re: NB200 - automatic plug-and-play for Ethernet cable

Do you know why I don't have automatic plug-and-play, when I connect to internet ethernet cable on my NB200?

Hey mate,

Automatic configuration tell you exactly?

Normally, nothing is plug-and-play. If you want an Internet connection via Ethernet cable, you must configure this port. This means you need to set a static IP or DHCP.

Tags: Toshiba

Similar Questions

  • Plug-and-Play for Cisco Small Business 300 Series managed switch

    Nice day

    What are the automatic installation options available for the Managed Switch series of Cisco Small Business 300?

    It seems there are not, the operating system is not the standard IOS I used to.

    I would use with ability to bridge the Infrastructure first Cisco PnP.

    Concerning

    Stone

    First Infrastructure use and assume an agent CNS (Cisco Network Services) on the other side, when you enable the 'plug & play '. Series 300/500 do not run IOS and does not include the CNS agent, but there is a way to activate the automatic configuration. Switches supported by the automatic DHCP configuration (using DHCP options 66, 67, etc.) in which case they automatically download their config to a TFTP server at boot time. This allows an administrator to put the configs for all switches on a TFTP server and simply start a default switch factory in order to obtain config.

    Seal a document shows how this is done.

    Hope that the information would be useful.

  • Do I need a wireless receiver to connect an Xbox 360 Plug and play for my Windows 7 laptop?

    Original title: Please HELP ME MY KIDS ARE DRIVING ME CRAZY THEY WANT TO USE HAND HELD CONTROL

    HI I NEED A WIRELESS RECEIVER TO PLUG AN XBOX 360 AND PLAY TO MY WINDOWS 7 LAPTOP

    Hello

    Welcome to the community forums of Microsoft and thanks for posting the question. According to the description, you must learn more about the connection of a console Xbox 360 for Windows 7.

    For more information about how to connect a wireless controller and peripheral game on Xbox 360 receiver, refer to the article:

    Xbox 360 Wireless Gaming receiver for Windows

    http://support.Xbox.com/en-us/Xbox-360/accessories/Xbox-360-Wireless-gaming-receiver-Windows

    Connect a game controller
    http://support.Xbox.com/en-us/Xbox-360/accessories/connecting-game-controllers

    If you have any other questions about the issue, I suggest you contact Xbox support forums to get help:

    Welcome to the Xbox support

    http://support.Xbox.com/en-us/?XR=shellnav

    Hope this information helps. Please reply with the status so that we can help you.

  • How we prevent USB plug-and-play for a specific device

    I have a plotter-cutter which is controlled directly by the software, not a pilot. It is USB connected. It works fine until Windows 7 Decides to install a driver and it then blocks the access of the program for the device.

    Windows then refuses to completely delete the driver information and then uninstall the driver and the software for the device is not entirely clear the problem back to blank pre-installation conditions. Even through the registry (after the uninstallation and removal of device) and removing the masses of references to registry keys that remain don't empty the system.

    I have installed the system on about five computers now and I miss.

    What I need to be able to do, is stop Windows from take control of that specific device without disabling USB or mess up the other USB device mode

    Hello

    I suggest you check out the following link.

    Guide step by step to control the device by using Group Policy

    http://msdn.Microsoft.com/en-us/library/bb530324.aspx

    Note: This link also applies to Windows 7.

    I hope this helps.

  • EliteBook 8540p: is the engraver of DVD 595759-001 for Elitebook 8540p plug-and-play

    I have a DVD ROM drive, only in my 8540p here, and I just ordered a DVD (595759-001) burner to replace it with. Just install the hardware? Is this going to be a plug-and-play experience, or I need to find drivers for the replacement? Do I need to uninstall the driver for the original DVD ROM?

    Hello

    The driver for any optical drive is provided by Windows, then you should just connect the new device, but it can sometimes avoid problems by doing this as follows.

    Hold down the Windows key and press R.  In the run box, type devmgmt.msc and press ENTER.  Expand the DVD/CD = ROM readers, made existing right click the device and choose uninstall.

    Once completed, stop the laptop and made the new optical drive.

    When you start Windows, then, give it a few minutes to load completely and you should find the new drive is running.

    Kind regards

    DP - K

  • Need a transcript of Plug - and - Play foot pedal compatibility for licensees / Cancer stricken Transcriber

    Apparently, I need something called a "connector plug-and-play" so I can use my pedals to navigate through a test of medical transcription dictation using Express Scribe for audio and Windows Media Player to the foot pedal. I don't know if I have all that right.  That is this connector, I just plug it into a USB port and where can I get one?

    PS - I'm a medical transcriptionist (through speech recognition and low patient census) try to pass a test to get a job to save my life. I am also a patient suffering from cancer, so I need a job soon because my insurance COBRA spikes to $645 / month in three weeks. Can you help me?

    All the information you need is here.

  • Microsoft Teredo Tunneling adapter does not work on my Windows 7 and cannot start. The Plug and Play ID for the device is 12.

    Anyone can guide me please by reinstalling my Microsoft Teredo Tunneling adapter for my Windows 7 operating system?  I ran a diagnosis of the system and says it can not start correctly and has a hardware failure. The Plug and Play ID for the device is 12.  I have problems to install it.

    Hello

    Try these solutions:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-do-i-reinstall-Teredo-tunneling-win-7/10ff26a2-fc53-4CDE-AE4C-3cd35f15e2e2

    How do I reinstall Teredo

  • Staging Drivers for Plug-and-Play with HP RemovePNPDrivers utility

    This video describes how to download and extract the software, delete the printer driver HP staging of files using the HP RemovePNPDrivers, package and stage a driver using the HP Driver Utility (DDU) Deployment, perform a Plug-and-Play driver installation and verify that appropriate driver is installed.

    For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.

    This video was produced by HP.

    I hope you find this information useful.

  • The plug-and-play USB mouse will not work on Satellite A100

    Hello

    I have a laptop Satellite A100 laptop and when I try to install a plug and play mouse windows says it is not recognized - unknown device.

    Please help the mouse works.

    Thank you very much

    Hello Jayne

    It will be really interesting to know where you're trying to connect the USB mouse. Can you send description of mouse models please?

    As I know it is not necessary to install a driver for external USB mouse and mouse is usually recognized automatically. Please check if a driver installation is needed, and even request delivered must be preinstalled.

  • Xbox 360 controller (wired, Plug and play) in Vista!

    I plugged the USB controller and let the drivers to install automatically, I restarted. But when I try to play, theres no response to all games. Can I activate the controller with the big Center (button as I would to turn on normally the X controller)? what I'm missing here? I even went to the control panel > game controllers and it is not listed in the menu options. Help, please!

    Okay - I use a PLug-and-PLay charger with USB socket, I read that I might not be able to use this type of cable, can anyone confirm? It DL'ed pilots tho?

    No, which won't work.  The charger is not a communication cable.  If you have a wireless controller, you need the PC wireless card for it.

  • Blue screen: Plug and Play detected an error, probably due to a bad driver?

    Get a Blue Screen of Death: Plug and Play detected an error, probably due to a bad driver?

    I'm running on Windows Vista Home Basic. I don't know what happened, but this morning when I turned on my laptop Dell Inspiron 1420, the blue screen of death appeared saying that "Plug-and-Play detected an error, probably due to a faulty driver. She also asked me to 'Disable the BIOS memory options such as caching or shadowing the' but I don't know how to do this, because it does not appear on my BIOS settings. In addition, the message suggested that I go on safe mode, but whenever I try to go on Safe Mode, the Blue Screen of Death keeps re-appearance, so I can not go on Safe Mode or the other. And one other weird thing is that when I press F8 (press the key to early startup options) I get to select an operating system to start: Microsoft Windows XP Embedded which is weird, because as I said, my OS is Windows Vista and I don't have any other OS installed in my laptop. How can I solve this problem?

    Hi,                                                      Part 1 of 3
    (There is a 4 part added)

    These methods as well as those in the next 2 posts to troubleshoot BlueScreens. You
    can also post information that you store in a message in these forums.

    You can solve this a bit on yours with these little free programs.

    1. use BlueScreenView read minidumps and note the BCCode or stop codes, the Cause and
    the time.

    2. run MyEventViewer and search the entries at the time or a second (or) more before the BCCode
    or stop the BlueScreenView Codes.

    3. look for the code on FaultWire - ago usually excellent solutions.

    0x00000000 to 0x00000003F
    http://www.faultwire.com/solutions_index/fatal_error-1.html#IssueList

    0 x 00000040 to 0x0000007F
    http://www.faultwire.com/solutions_index/fatal_error-2.html#IssueList

    0 x to 0x000000BF 00000080
    http://www.faultwire.com/solutions_index/fatal_error-3.html#IssueList

    0x000000C0 to 0x000000FF

    0x00000100 or higher
    http://www.faultwire.com/solutions_index/fatal_error-5.html#IssueList

    4. position the BCCode or stop Codes, settings, the Cause and related information in a message
    detailed in this forum for assistance.

    ---------------------------------------------------------------------------

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
    Displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
    time of the BSOD to provide more information about the possible cause - see TIP)

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it for a bit before and after the time of the BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    =============================================

    Here is the example of the usefulness of BlueScreenView - it is small and automatic so very easy to use.
    With time MyEventViewer TRICK is very simple to check when the BSOD.

    Partial screenshot of BlueScreenView (first 1/2 page)

    ============================================

    Partial Screen Shot of BlueScreenView (second 1/2 page)

    =======================================================

    Double-click the line to dump high component file or file - properties with it highlighted.

    =======================================================

    Double click on the bottom panel line of file name or file - properties with it highlighted.

    Right-click on a line - report HTML Selected Items.

    List of crash - created using BlueScreenView

    Dump File Crash Time Bug Check String Bug check code Parameter 1 Parameter 2 Parameter 3 Parameter 4 Caused by the driver Caused by address Description of the file Name of the product Company Version of the file Processor Name of the computer Number of processors Major version Minor version
    041110-22218 - 01.dmp 2010-04-11 22:42:11 NTFS_FILE_SYSTEM 0 x 00000024 00000000' 001904fb fffff880'065a7bd8 fffff880'065 has 7430 fffff800'02c7c0c4 NTFS.sys NTFS.sys + 213d8 NT file system driver Microsoft® Windows® operating system Microsoft Corporation 6.0.6000.16386 (vista_rtm.061101 - 2205) x 64   2 15 7600

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Unknown device message to an external hard drive USB... supposed to be plug-and-play

    I have a Western Digital external hard drive, 1 TB, I installed a PCI 2.0 card when I couldn't device works.  This has resolved nothing.  When I attach the hard drive, it does appear a message that says that the device is unknown.  I don't know how to fix the problem manually.  I contacted western digital, but be plug-and-play they provide drivers for their products and have referred me to your website.  Please help, its nothing more than an expensive paper weight at this point.

    Hi mgregurich,
     
    I suggest you try the following steps:
     
    Step 1: Find the error code in Device Manager

    1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    2. in Device Manager, look for the USB device, and then double-click the device name.

    3. under the gaze of general tab for the status of the device for any error code indicated.

    http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
     
    Step 2: Run the fixit provided in the link below.
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Step 3:  Unplug the power and USB (universal serial bus), wait for a while and connect the external hard drive to another USB port and check.
    Also, connect the external hard drive on another computer and test if it works fine.

    If the problem persists,

    Step 4: Replace the USB controllers.

    First of all, please disconnect all USB devices and then perform the following steps:

    1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

    2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

    3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
     
    Then, restart your computer and windows vista will automatically reinstall all USB controllers.

    If the problem persists, please contact western digital for assistance.
    http://support.wdc.com/

    Thank you, and in what concerns:
    Ajay K
    Microsoft Answers Support Engineer
    --------------------------------------------------------------------------------
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Plug-and-play is not listed on the list of services

    I am running Vista; USB, camera and microphone don't work; did some research and found the plug and play service is not listed on the service list so I guess that is not currently running.

    How to start the service?

    Hello

    ·         When you connect a USB device to the computer it gets detected?

    ·         You receive an error message when you connect a USB device to the system?

    I suggest you try the methods provided below and check if they help to resolve the issue.

    Method 1:

    See the link below and run the fix it tool, or follow the Troubleshooting Manual for solving problems with USB devices in Windows Vista.

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Method 2:

     

    Make sure that the plug and play Service is set to automatic and started. To do this, follow these steps:

    one), click Start-Run, type "services.msc", click on OK.

    (b) when loading the Services window, navigate to the 'plug and play', double click on it to open it,

    (c) make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change.

    "(d) if she once said:"Automatic", then click on the "Recovery" tab at the top, change the first"

    Line for "Restart the Service" failure", then click on" "apply ', then OK. "

  • no desktop background and dcom shutdown and plug-and-play stop messages

    For about a month now, I have had no splash screen. I'll have to use the Task Manager to actually use my pc that is not too much a problem just annoying really, but then for the past days, windows has been close specifying a stop plug-and-play message or dcom. I went in administrative tools and services and tried to fix it but didn't work. I'm completely computer illiterate, so if someone can help please be understanding with your answer and use plain English please!

    Hi nikkianddave

    Have you installed new software until you have encountered the problem of funds? Since then, did you install any new updates MS or applications? Is updated your Anti Virus?

    Try these steps and check:

    Step 1: Perform a clean boot and see if the problem persists.

    Step 2: Try to start the DCOM Server process Launcher service & Plug-and-Play.

    Please follow the instructions below and the service that precedes the value Automatic.

    1) click the Start button and in the search box, type in: Services.msc

    2) press "Enter" to open the Services window.

    (3) find a list of related services above and verify the status and Startup Type.

    4) double-click the service to change the status of started and set the startup type to automatic.

    Step 3: For the desktop no problem you can try to set the default value for the parameter of the windows interface:

    Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. How to back up and restore the registry in Windows

    In the Windows registry (open 'regedit') and go to:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\winlogon\

    Set variable "Shell" = "Explorer.exe" without the quotes.

    Also refer to:

    http://social.technet.Microsoft.com/forums/en-us/itprovistadesktopui/thread/638effda-C124-4920-80fd-6dbbab0880bf/

    After back and let us know if it helped to solve your problem.

    Thank you and best regards,

    R uma - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • What is the reliability of Plug and Play in Windows 7?

    What is the reliability of Plug and Play in Windows 7? I mean he came in windows in Windows 98. Sometimes, when you plug a USB device, you may need a set of 60 seconds to restart your computer. Our company become lazy 60 seconds is too long to wait to use a USB device? It might be a good improvement in the next generation of Windows operating systems, but is it reliable, Plug and Play in Windows 7? Any ideas?

    There is a finite amount of drivers that can be incorporated into Windows such as Windows recognizes the device. In addition, device manufacturers must submit the drivers to Microsoft to incorporate into Windows at construction time. Out of the box Plug and Play does not work for all possible configurations of hardware.

    Windows 7 Service pack 1 is released in 2010, the last chance for drivers to be incorporated into the build. Devices with their own hardware ID, which were released after the construction cannot be identified automatically and must, by definition, provide the required drivers for the start install but after that, they should recognize the device automatically. Although the USB 3 specification has been ratified by little around the time of the release of Windows 7 more material supporting this specification came out that shortly after. Windows 7 does not natively support USB 3.

    Windows 7 of Plug-and-Play support works very well, but depends on the hardware manufacturer provides drivers reliable and other support files when it comes to new hardware. Your problem is not with Windows, but your reception units. Windows 7 is now disabled standard support.

Maybe you are looking for

  • How can I keep Firefox 18.0.1 registration of thumbnails of the sites I visit in a folder on my PC?

    How can I keep Firefox 18.0.1 registration of thumbnails of the sites I visit in a folder on my PC? Anyone can view these .png files and I should not have started to clear my cache and delete the folders whenever I log on everything just because my b

  • Cannot download large software updates for my mac.

    No problem with wifi, it's just that the connection with the server is lost and the Dow Jones nLoad again to the bottom. Its been more than a month, if you have any tips I will be happy ^_^. I started to download the Mac OS X El Capitan for example p

  • Mousepad not working not not on Helix 2

    I just bought a new propeller 2. The mouse pad does not work. Is there a key combination (function key, etc.) I might have accidentally pressed to turn it off? Or maybe it's a DOA unit? I rebooted, disconnected and mooring, etc.. I have the Pro keybo

  • Cannot find windows media player

    I have windows vista, I had a problem with some virus so I had my computer worked and now I can't find my windows media anywhere in my computer how can I get it back?

  • (Redirected) Webcam

    Hello.  I have a Dell laptop inspiron 15.  It seems that there is a webcam at the top of the screen.  However, if I try to use Skype, no webcam lights.  I can't find any settings for a webcam, either.  I thought I used the webcam once before, but now