Re: No sound after that computer laptop Satellite P100-160 wakes from sleep

Similar Questions

• IV of the lost files after that computer laptop had made the recovery of the PC

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  On the 02/02/2011 23:30 my laptop (HP Pavilion dv6000) went into hibernation, so I turned on me back to laptop and this message came [system could not reload the last location] asked me to recover the laptop.
  So I did it by using the second keys F11 after hitting the power button and it went to a screen that says [PC Recovery]
  so I followed what it says on the screen and in my view, he also said that he would remove all of my files IE: my pictures my videos my music... etc. So Iv me recovered laptop and iv lost all my files and bookmarks how do all, can someone help me on this you and all this is on windows XP pack2

  Try a search-start-search-type in for example my photos my music etc. and run

• L50D-B satellite will not wake from sleep mode

  My satellite L50D-B - 16 Q won't get out of the way 'sleep'.
  When I turn on the power button so the NUMLOCK and CAPS LOCK light

  Hello

  How about this solution:

  • Disconnect the power adapter
  • Remove the main battery
  • Power button press and hold 30-40 long s
  • Reinsert the battery
  • Plug the power adapter
  • Press the power button

  Note: Repeat this procedure 4 or 5 times in the line and check if you could power the unit after each step

• Satellite P100-160 with Vista: No TV-OUT after downgrade to XP

  Hi guys hope you can help me out here...

  I recently bought a laptop (satellite p100-160) with Vista on it to know that it was not compatible with wot I bought dethrone so I decided to downgarde for XP Home Edition... Solange decommissioning that I had to install a few drivers like there's do and everything went well...

  Anyway, a few weeks later (yesterday), I went to watch a movie and when I pluged in my tv out cable, I have nothing. I tried to unplug and plug in again a few times but still nothing, it normally switches on in about 20 seconds... So im guessing that either I need to a driver or a Summit.

  Can someone help me out here?

  Thanks a lot

  You n t need a special driver to use the s-video port.
  You must install only the compatible graphics driver.

  How have you tried to switch to the TV device?
  Have you used the FN + F5 key combination?
  You should do this.

  Connect the TV to the laptop using the s-video port. Then select the s-video on the TV and choose the right channel.
  Press the FN + F5 several times until you get a picture on the TV.

  Please note; Don t start the DVD software like DVD win until you have not enabled on TV!

• Lost after that computer woke up from his sleep and sound after the Microsoft Fix It

  Original title: no sound

  Hello.

  No sound from my computer.  The Conexant device work properly.  Volume is in place on the speakers and the sounds of Windows.  Windows Media Player is not cut.  No speakers or headphones are involved.

  This problem started a couple of weeks, when I ran Microsoft difficulty It Center.  I used the difficulty It Center because I always lost sound after that my computer is awake to being asleep, which means that I always had to reboot to get the sound.  But now there is no sound whatsoever.

  Can you help me?

  Hello

  You can refer to the following link to download the latest version of the Toshiba support drivers.

  Toshiba support

• Tecra M5: No sound after that Bluetooth is enabled in Vista

  Hi all

  I had the audio problem in my Tecra M5 notebook.
  My Tecra M5 is no sound after that I put my audio Bluetooth.
  The M5 Motorway uses Bluetooth to listen to whatever it is now.

  I have reinstall my driver for audio device by default but you have no sound with my default audio device.
  My OS is 'VISTA '.

  My Audio device problem is 'High Definition Audio'.
  Please kindly help me.

  Thank you very much.

  Hello

  If I you would then I would first check the sound settings in the control panel.

  Click sound-> the Read tab.

  In my case the "speakers" are defined by default.
  It would be also a good idea to check the property settings.

  I'd appreciate your comments.

  Good luck

• After that computer has been idle, error installation about DriverCure

  Get the message box on my screen after that computer remained inactive during the night of DriverCure saying Setup error. I was not able to locate to uninstall / reinstall. I don't remember always to help or even try to load this product. How can I get rid of this?

  If you go to start and type msconfig. Then go to the tab startup look to see if you see a program called DriverCure here. If so, then uncheck the box and restart your computer to see if you get the Setup error.

  Before going any further, do a manual system restore point.
  Right-click on the computer icon in the desktop, then choose Properties
  In the left pane, click System Protection
  Alternatively, to directly access the System Protection tab, click Start and type SystemPropertiesProtection.exe.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  In the System Protection dialog box, type a description, and then click on create.

  If you find DriverCure, then look at the location and copy the path. It would be something like: HKeyLocalMachine\Software\Microsoft\CurrentVersion\Run
  Then go to start, type regedit. Then highlight the path you have copied, if drivercure present in the key, and then delete it.

  Then reboot and see if you still see the same error install DriverCure.

  Please answer back with an update.

  Sincerely,.

  Marilyn

• How can I top up my subscription to Adobe Acrobat after that my laptop has been wiped and reconfigured?

  How can I top up my subscription to Adobe Acrobat after that my laptop has been wiped and reconfigured?

  Hi Squirrel Nut,

  Download your subscription and access Adobe Acrobat by logging into www.creativecloud.com with the same credentials as before.

  Kind regards

  Ana Maria

• Satellite P100-160: Mono sound when you use MciSendString() calling Winmm.dll

  I have a Satellite P100-160.
  The sound works well for some programs, Windows Media Player, etc. Audigy.

  However when I call for its program using MciSendString() calling Winmm.dll I get only mono sound channel, good times left channel is almost silent. SetAudio volume has no effect.
  I've updated the BIOS and the audio driver for the latest versions available on this site.

  Does anyone have a solution or pointer to a solution.

  Is it really a laptop problem?
  Maybe the multimedia function MciSendString() provides only the mono or your have done something wrong?  :|

  See Microsoft Developer Network:
  http://msdn2.Microsoft.com/en-us/library/ms709492 (vs.85) .aspx

  I don't know what you want to do and why you use the MciSendString() to call Winmm.dll, but if the sound display correctly using current players like Windows Media Player, for example, I really put t see any hardware problem m

  Note it is a Toshiba user forum and here you will encounter common users who share knowledge and solve common issues of interest.
  In your case, I recommend you to visit a few Microsoft developer forums and support sites.

  Best regards and good luck

• Fallout 3 stops working after the computer wakes from sleep

  Since the games for Windows Live 3 is out, Fallout 3 has never been the same. He used to work at best my GfWL and now her nightmare. Recently, after that I quit the game and put my computer to sleep, Fallout 3 will stop working completely after wake up. I try to start it and I get them all is a cursor with a small blue rotating light. What is even more strange, is that my computer goes into a State of semi who no longer meet this point where programs and keyboard shortcuts no longer work, but I can browse my hard drive. I try control + SHIFT + ESC to see what the devil but that causes Windows Explorer to stop working. CTRL + Alt + Delete does not work either. No matter what I try, once I start Fallout 3 after the computer wakes from sleep, I can't do the task to the top manager and I can't use my computer. The only way to get it is to hit the reset button or turn off manually. Can someone please help to get rid of this problem?

  Hi murphy449,

  1. did you of recent changes on the computer?

  2. the problem only happens when you start fallout 3 after the sleep mode?

  3. are you able to wake the computer quits successfully sleep mode?

  4. What is the version of Windows installed on the computer?

  Method 1

  I suggest that you manually download and install the latest drivers for display on the computer card and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  If the previous step fails then I suggest that you try the clean boot procedure to check whether a third-party program installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails then I suggest you check the observer after return with details and events for the cause.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite U500 - may not wake from sleep

  Hi all

  I have a Satellite U500 laptop win7 64 bit and my system may not wake from sleep mode.
  "Standby mode" when I press the power button or any key of the keypad power led lights up but the screen stays black and the system is unusable.

  Any help?

  Have you noticed this problem in the first moments after upgrade to Win7?
  I assume that you made a mistake with Vista?

  Have you noticed the same behavior when you use hibernation mode?

• Satellite P100-160 - several PCI bus do not work with a shadow video BIOS

  Hello

  I got my Satellite P100-160 for about five years now and have never had any problems like this before.
  A few weeks ago my system did not (or something like that), so I pressed the power down button to turn it off.
  Then, as he was put on, he seemed to freeze on the loading page and so I held the off button again.

  The present results are when I turn it on, I get a screen telling me several bus PCI etc do not work and he says 'video occult BIOS.
  I then have the option to press F1 to resume or F2 to enter setup.

  In addition, one of my USB slots has completely stopped working and my card slot has also stopped working.
  Can someone help me please? I'm on Windows XP, SP2.

  See you soon,.
  Liam

  Hello

  I think that you need to access the BIOS (press F2 when the laptop starts up) and put its default value.
  Then try to start the Vista again and press F8.
  Then you will get a menu of advanced start it you should choose repair computer.
  Vista supports a clean internal repair option, you should try this and must repair the operating system.

  If this will not help and you still want to not be able to start a view, then a system recovery may be the best option for you

• Satellite P100-160 - screen Vertical burst

  Satellite P100-160 my son has developed a fault on the screen that no one seems able to identify the cause of.

  If you imagine that the screen is divided into six equal vertical columns about 3 inches wide, the third vibrates from top down so that the image is blurry. Sometimes it stops after an hour - but recently it just keeps going. The other "columns" are very good. What is the screen itself (easily replaceable), or the video card (on the motherboard) or another component such as the inverter?
  For now I'm not sure if scrap it and buy a new one or replace the screen.

  Any ideas?

  Hey,.

  I think that the best way to address this issue must connect to an external monitor to your laptop. If you notice the same problem on external monitor the problem is related to the graphics card itself. If the display is faulty and must be replaced.

  Then connect an external monitor and check what's happening!

• Question about the update of value added for the Satellite P100-160 package

  Hello

  I got an email off the coast of Toshiba today telling me there is a value added package update available (PVAT (v1.0.25).
  I downloaded and unpacked. It contains three options:
  2 don't buttons, button 6, no button but there is no readme etc to tell me which version is my P100-160.

  I have added, trying to install one of them gives me an error that it has already installed older versions that should be deleted everything first.

  Can someone advise please that I should use?
  Thank you!

  Hi guys

  Value added package contains many different Toshiba and utility tools!
  Satellite P100-160 belongs to the PSPAA series! So, you should always choose this series if you want to download the drivers from the Toshiba page!
  This number can be checked on the bottom of the unit.

  I visited the page of the Toshiba driver and checked the details.
  You will find an info that this package installs a range of important public services.
  -TOSHIBA components common Driver: this module is an essential component of Windows Vista. He will have to make the other original programming TOSHIBA works correctly.
  -TOSHIBA Power Saver: The energy saver controls energy by opting for optimal power settings, if the machine is connected or battery-based knowledge and based on the remaining battery power.
  -TOSHIBA utility: this program allows you to customize the settings of your hardware, depending on how you work with your computer and the devices you use. To start the utility, click the Start button and select Control Panel, and select Configuration HW TOSHIBA icon.
  -TOSHIBA password utility: this utility allows you to set a password that restricts access to the computer.
  -TOSHIBA Flash Cards: This utility provides the Hotkey function and the function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.
  -TOSHIBA PC Di

  In my opinion, if you want to update the package of value added, you must remove all the tools of this and after new reboot you must install it again

• Crashes BSOD and Satellite P100-160 PSPAAE

  Hello

  I own a toshiba satellite p100-160 PSPAAE

  I love my laptop, but I had nothing that trouble with it since I bought it a year ago

  I have insurance but my insurance claim there is nothing wrong with it and fix it the custom (tech guy)

  I get blue screen errors and then it crashes, it s happening more and more often, especially when I turn on my laptop.

  It is never used for whatever bad happens normally randomly about 7 - 8 times a month, now it every time I turn on my laptop, after that it restarts its ok again.

  Here are some of the stop codes that I get)
  BCCode: a
  BCP1: B27E4B16
  BCP2: 00000002
  BCP3: 00000000
  BCP4: 81C92FC1

  2)
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 81C7B7A9
  BCP3: ADEA7A74
  BCP4: 00000000

  3)
  BCCode: 4th
  BCP1: 00000099
  BCP2: 000405F5
  BCP3: 00000007
  BCP4: 00000000

  4)
  BCCode: 1a
  BCP1: 00041284
  BCP2: A5BCC001
  BCP3: 000055ED
  BCP4: 87 00000

  5)
  BCCode: 23
  BCP1: 000E0100
  BCP2: A81D66C4
  BCP3: A81D63C0
  BCP4: A81D677F

  6)
  BCCode: d1
  BCP1: A3B653E8
  BCP2: 00000002
  BCP3: 00000001
  BCP4: 8C9E8E5E

  7)
  BCCode: 50
  BCP1: 80000000
  BCP2: 00000000
  BCP3: 00000000
  BCP4: 00000000

  I formatted my laptop about a month ago and have already 15 blue screen errors, my memory is ok, I let my phone update of its self.

  Please help me, I'm thinking that it my motherboard, but I'm not an expert, when its not to crash it works very well, had a few other problems.

  Sorry, it's really long to read but I don't know what to do, thank you

  Hi Sarah,.

  I suggest formatting again and see what happens. You have also all updates installed (Vista SP1 if you are running Vista or XP SP3 if you're running XP?).

  Hope this helps

  Neo-Tech :)