Re: Not possible to enter sleep/standby extended - standby/hibernation is not allowed now
No matter what method I use to try to switch to Stanby or hibernation mode, a prompt indicating "standby/hibernation is not allowed now" appears.
For example, this happens when I go through start-> shut down the computer, or when I close the lid of my computer that I put to sleep mode.
Help, please! Thank you!
Hello
First of al I'd like to know what model of laptop you have.
Then it is possible that the Hibernate mode.
Please check the settings if Toshiba Power Saver was installed on the laptop to save energy, and then check the settings there.
Otherwise, you must check the power Windows Option in the control panel
See you soon
Tags: Toshiba
Similar Questions
-
Lose Internet connection after sleep/standby/hibernation Mode
I recently bought a new HP Pavilion Elite e9105z CTO Office and migrated from Win XP to Vista Home Premium x 64, with a NVIDIA nForce 10/100 Mbps Ethernet Controller. Whenever I come off standby or standby mode, I lose my Internet connection and have to restart my system or run Windows Network Diagnostics to repair the network adapter settings.
I tried several remedies available on Internet; but unfortunately, nothing has resulted in a permanent solution. I contacted my service provider ISP (Mediacom) wonder if it was / is a problem with the firmware used to my cable modem SBV5220 support (for example, incompatibility with Vista) and they said there is no. So far, I have:
- Reinstalled NIC driver.
- Power options controlled and reset with USB CDC.
- Apply the update for Windows Vista (default gateway setting is lost) for x 64 systems (KB933872) - response that update does not apply to the system.
- Reset the IP configuration via the Cmd line.
- Tab power, unchecked the box that shuts down the adapter then power save comes into play.
Access the computer several times a day and having to reset Internet connections became extremely aggravating. I hope there is a solution. Thanks in advance for your help.
Back from a 3 week stay, during which my office has been extinguished, my local internet connection would come is no longer active when he came out of hibernation. The without line worked, but the local connection would not work unless physically, I unplugged the cable from the router (Netgear) and reinserted it.
After several days of frustration, I went into the Manager of devices, unchecked ethernet optional adapter "allow the computer to turn off this device."This seems to have cleared up the problem, at least until now... -
Satellite C75 - A - auto sleep (standby) does not work
Hello
My Toshiba SATELLITE C75 - A will not automatically in standby mode (standby) after some time of inactivity.
Eve works well when I trigger it manually with the start menu and when I do not use the mouse or keyboard for a while, the screen turns off. But neither sleep nor put into hibernation is turned on after the interval set in the energy saving plan.When I run
powercfg with fluo compact
on the console I get"PCI Express Active State Power Management (ASPM) has been disabled due to incompatibility with the hardware on this computer."
My BIOS is updated.
I would be really grateful for any advice.Hello
Have you tried to activate the Hibernate mode and standby manually by using the powercfg command?
Here is a list of possible options regarding the powercfg command:
[Powercfg command-line options | http://technet.microsoft.com/en-gb/library/cc748940]For example with the command * powercfg-h on * turns the hibernation feature on or off.
You can use also returns a list of devices that support hibernation or sleepBy the way: what system are you using?
In addition, you can try to activate or disable the PCIe Link State Power Management in Windows
Go to control panel-> Power Options-> advanced power plan settings
Here, scroll down and expand PCI Express and Link State Power Management.Currently setting (without battery) or on battery and sector, open the drop-down menu, select Off or ON and click OK.
If you select No, there is no energy savings, and current runs regardless of which state that the laptop is in. (depending on whether your laptop is plugged or not).
On battery: Off = PCI Express even will communicate using the power of the battery.
Plugged in: Off = PCI Express communicates when it is connected as well. -
HP LJ MFP M425dw 400 does not wake after entering sleep / Auto mode
Hello
After you have installed the latest version of the firmware 20140521 (May 21, 2014), the device is not trampled after entering sleep / Auto Off mode.
The configuration of the device and save the settings listed below.
Tell me how to solve this problem?
It could be a hardware or a firmware related issue.
You try to perform a reset of the base unit and also try to send new firmware.
The device may need to be tested with additional troubleshooting steps, so I would say to make an appeal for support through your regional HP Support channel.
-
MacBook Air 11 '' Early 2015: normal sleep/standby consumption?
Hello
I can't help thinking that the power consumption of my MacBook Air 11 '' (early 2015) while "asleep" has increased lately - battery loses about 20% in 24 hours of sleep. "
So, here's my question: is a loss of battery charge about 1% by standard time?
I should add that I can see log files that the appliance has been in "Deep sleep" during sleep, as you can see here:
05.01.16 21:15:34, 000 kernel [0]: ARPT: 7953.437734: IOPMPowerSource information: onWake, SleepType: deep Idle, "ExternalConnected": No, "TimeRemaining": 4370.
I've already changed parameter of power management that the device should enter mode standby after 4 minutes of sleep (see below), which he seems not to do (always).
In the terminal, the command of g - pmset we get the following results:
Active profile:
Battery - 1 power *.
Power supply - 1
In use:
standbydelay 240
Watch 1
halfdim 1
hibernatefile/var/vm/drag
PowerNap 0
gpuswitch 2
disksleep 10
sleep 2 (sleep prevented by AddressBookSourceSync)
autopoweroffdelay 14400
hibernatemode 3
autopoweroff 1
ttyskeepawake 1
displaysleep 2
acwake 0
lidwake 1
BTW: I do not think that the entry "prevented... sleep." "really means the unit can not sleep - he lay in mode 'deep sleep '.
Thanks for the ideas.
Thank you all for the many responses (SCNR)
Just to give me a follow-up (perhaps this helps someone in the future):
After a thorough analysis of the pmset g rawlog and console output that I discovered that my MacBook Air just don't go 'Deep rest' in mode 'Sleep' after the designated 'standbydelay'. Deleting the file drag (var/vm/drag) has not helped. What helped, however, was a reinstall of Mac OS X recovery (without removing the hard drive).
Since then, consumtion of power during the sleep returned to a much better behavior: during the first three hours of sleep, consumption is about 3%. Subsequently, the system performs a wake of maintenance for switch in the standby mode, and after that which consumes almost no more energy. So, after 24 hours, the overall loss of battery charge are still 3%.
I'm happy again.
-
Get the Blue error screen when entering Sleep Mode
Original title: BSOD
I get BSOD a few times of the day when my computer enters "sleep". I guess it is driver related but is unable to identify the culprit. I use BlueScreenView and on some files .dmp lists as the "caused by driver" ntkrnlpa.exe on others, it lists tcpip.sys. Can I download files .dmp full if someone can give me an idea on how to solve this problem? Thanks in advance. Vista by the way.
Hello
BSOD CAUSE tcpip.sys which is a component of Windows that means something else, he drove in error.
The question is usually the network drivers used and/or antivirus/antispyware/security programs.-----------------------------------------------------------------
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlHow to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.htmlI hope this helps.
-
sleep and extended problem solved!
Hi all.
Finally I solved my problem (see "sleep and extended in windows XP" for more details).
I uninstalled everything on HP printer because Windows XP plug-and-play service does not load the Power Manager settings if it is not the printer.Now I understand why the HP software does not work properly, you know?
See you soon.
Gianluca
It seems that the HP software has adopted some features of the operating system. Normally, it is very good for the manufacturer to give the features more functions.
But if there is a third software such as Power Saver from Toshiba could occure problems because the energy saver adopts XP power settings and it administer very dominate. If the HP printing software was not able to adopt the settings of MS!
Hans Bye
-
Satellite U300-144 does not come from the standby/hibernation mode
Hi, can anyone help?
I have a new Satellite U300-144 accompanying the Vista home 32-bit preinstallation. I have a problem, he wants to come to the sleep/hibernation mode, and my clear blue power is always on standby/hibernation mode. I hold the power button to restart the computer and then I get a message of illegal closure because I don t shutdown right.
I tried to upgrade the BIOS later for my model and the n t the problem, then I tried to upgrade to Vista Ultimate t doesn't help either. I installed all the drivers and everything works real well.
A colleague using me U300 Office. I asked him to check the extended sleep/standby option and he reported that everything works correctly. He always uses the factory settings and only one update is added value package. He kidnapped the former and installed latest version of the Toshiba download page.
Have you installed latest PPVS too?
-
How to use the sleep/wake extended or off display options?
Computer laptop Satellite L300 go into sleep/hibernation, or off the screen. How can I activate this feature when the icon says he's already balanced mode?
In balanced mode, click on change plan settings and then open POWER OPTIONS.
So, if your laptop is connected to the AC adapter under sector editing options.If your laptop is preinstalled with settings you can enter standby/hibernation mode very easy to help
FN + F3 to mode ensures and
FN + F4 for hibernation mode.Check it out
-
Hello
I've updated my laptop HP for Windows - 10 - PRO EDITION (64-bit).
Update went well.All the drivers seem to be installed device and work.
Operating system works very well.
I'm having a problem with sleep / Hibrernation modes.
When I close the lid for a few seconds and then reopen the lid the laptop does not wake up.
When the computer goes to sleep it seems to go in hibernation. Even though I disabled the hibernation in the power of the system settings.
When I press a key on the keyboard of the laptop won't wake up.
It will not wake up from sleep or hibernation mode.
I need to power cycle the notebook to log in Notepad.
My laptop (HP 15.6 "15r011dx with the baytrail-M Intel Pentium platform) works very well with Windows-10 and wake up very well to the mode sleep and extended. So, I know what present works with Windows-10.
How can I fix?
Do I need to install other drivers/software?
This feature is not supported on this HP laptop?
Thanks in advance,
Alex-----------------------------------
My hardware:
HP Pavilion 15.6 "laptop with Intel-Core-i3 4005U haswell CPU (model # 15 - n065)
Product # E8B13UA #ABA------------------------------------
Hello
Please find the link given below might help you solve your problem.
-
Blocking issues, of sleep and extended Vista
Running Vista Enterprise edition on a HP 6930p with Service Pack 2 installed. Some days, that the machine works well, if I lock it then he out of lock fine, if I left in standby mode, I have to reboot for it to wake up. Other times I hit ctrl + alt + delete and nothing happens, system does not allow me to lock it. Cause then me having to let him sleep on his own, which then means that I have to restart it wound out of mode "Eve". Have turn off Hibernate that too did not work for me. Apply all patches, patches and do it yourself links I can find on the site of microsoft and the knowledge base. If anyone has a better solution, circumvent or difficulty apart from reinstalling Vista, please let me know. It is an end-user machine and has been a problem since giving him the laptop with Vista installed.
The machine itself is built from a brand image and not really tested before the user receives. The question also not spread wide which means we have a lot of users with similar HP and vista, but not the problem. This leads me to believe that a driver problem is to blame or maybe a setting within the system itself. I did the BIOS update and patches installed and used the latest drivers from the HP site. This seems to fix the problem at the time, but I have a particular user that this keep recurring with. Any other suggestions would be great, thx
-
modem internal not allowing not computer go into sleep mode
My internal modem will not allow my computer to enter the mode 'sleep'. I tried to disable the modem completely because I do not use it, but this has not fixed the problem. Also sometimes my monitor will enter a screen in economy mode and will not come out of it, the computer does not respond when I move the mouse. I have to turn it off completely for a response. I don't know if the two problems are related. What can I do?
Hello
1 I want to erase the General corruption and repair/replace damaged/missing system files:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------
Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
similar are not enabled.Shoot sleep problems - hibernation
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)All the default power plans and then set them as you wish.
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Sleep/wake extended options greyed out
I have a HP Compaq Presario CQ61 - Windows 7 64 bit. My sleep and hibernate options in the start menu are grayed out. I thought it was a problem with my video card, and when I go into Device Manager there is a yellow bang next to my called Mobile Intel (r) 4 Series Express Chipset Family display adapter and below it is written: this device cannot find enough free resources that it can use. (Code 12) If you want to use this device, you will need to disable one of the other devices on this system. I tried to update the display adapter according to HP I have the latest driver, so I have no idea what to do? My laptop used to have installed vista, but my hard drive failed, I got a new one installed with Windows 7 and since I got Windows 7, this problem occurred. Help would be much appreciated!
[Moved from comments]
Hi Sam,
A power plan is a collection of hardware settings and system that manages how your computer uses and conserves energy. Power management can save energy, maximize system performance, or balance conservation of energy with performance.
Let us try these methods.
Method 1.
You can run the troubleshooter of power to set your computer's power settings. The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.
Open the power Troubleshooter: http://windows.microsoft.com/en-in/windows7/open-the-power-troubleshooter
Method 2.
You can create a new power plan and check if that helps.
Change, create, or delete a power plan (scheme): http://windows.microsoft.com/en-in/windows7/change-create-or-delete-a-power-plan-scheme
Additional information.
Power plans: frequently asked questions: http://windows.microsoft.com/en-in/windows7/power-plans-frequently-asked-questions
Sleep and extended: frequently asked questions: http://windows.microsoft.com/en-in/windows7/sleep-and-hibernation-frequently-asked-questions
Response with the State of the question and we will be happy to offer you our help.
-
Is it possible to upgrade from version Extended CS6 13.0 x 64 to the latest version?
Is it possible to upgrade from version Extended CS6 13.0 x 64 to the latest version?
Not sure what you mean by there. Cs6 is the "last" standalone version. For anything else you need to register for creative cloud and at best your existing license will be good for a discount on the first year. The rest is irrelevant by all means.
Mylenium
-
Before that I only had to type "IMDb" and press enter and put me to the site immediately, but now all these links come first.
Or I used to type 'youtube' and after knocking entered, I was took directly to the homepage of youtube.
What can I do to make it like it was before, so it takes me directly to the site? Second, my Norton passwords and user names for all sites that have been stored in my 'Norton safe"does not appear in the browser. This will be available soon?
Try to define your topic: config entries for:
- Keyword.Enabled - > true
- Browser.Fixup.Alternate.Enabled-> true
- Browser.Fixup.Alternate.prefix-> www.
- Browser.Fixup.Alternate.suffix-> .com
and then restart your browser and try again supernatural imdb.
You must use 'supernatural imdb' rather than "supernatural imdb" because you want the domain before the page for research work best.
Maybe you are looking for
-
Unable to connect to the Web by HTTP site after viewing once it with HTTPS.
If I find a site with SSL (https). If later, I need to use it without ssl (http protocol) I can't, I am forced to use https. If you must know why it's necessary, it's because a Web site "https://example.com" ssl certificates configured properly, then
-
Installing WXP on Satellite A200
I want to install Windows XP on my laptop satellite A200-1AX And thank you
-
iPhone 6 asked randomly for the activation of the phone
Hello Last night my phone had no problems or issues. Then after no use for an hour (it was connected to my wifi at home, Verizon service fine and usually 2-3 bars in my house), I came back to it, and the activation screen has increased as when you fi
-
make osx password as password ios
With the help of: 10.10.5 OSX (but applies to the other OSX), Macbook Pro (retina, 13 inches, early 2015), 3.1 GHz Intel Core i7, 16 GB, 500 GB I would like my user login password to behave more like the password of iOS. In other words, OSx would loc
-
want to 5660: 5660 hp won't stop printing
How can I make the printer stop printing the same thing over and over again