Re: Portege R830 - 10 p - BIOS settings problem

Similar Questions

• Portege R830-1EE: supervisor / Bios - lack of prompt startup or login password

  Hello

  yesterday, I put the password of the bios/supervisor.

  When I turn on the laptop, I can see the Toshiba - leading screen innovations and then it darkens and none is unbootable.

  HDD / fan / graphics etc works - but I don't see anything or do some kind of prompt or shell or whatever.

  I tried all the stuff "Press ESC, press F2, press F1, press INS ', nothing has worked.
  I removed the battery for several minutes while pressing the power button, nothing.

  Maybe someone has a kind of idea what is wrong with this machine...

  Hello

  Have you used an ASCII character high as a, o, e, a, n, ae, e, e, c, ss, u, o etc. in your BIOS / supervisor password?

  In the past the use of these characters has prevented the laptop to boot the system.
  In this case, you need to contact the service partner in order to solve this problem.

• on the bios settings problem

  my laptop is 64-bit operating system.processor is intel i3 - 4030u.when I try to install 64 bit os in virtual box it shows the series of problems... can anyone give a solution

  Hello

  Try the steps listed in the link below

  http://h30434.www3.HP.com/T5/desktop-hardware/how-to-enable-Intel-virtualization-technology-VT-x-on-HP/TD-p/3198063

• Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

  Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

  Following message appears first

  BIOS version: Worm. current 3.40-> update version 3.70
  THIS Version: worm. current 1.30-> update version 1.50
  BIOS and THIS should be updated

  During BIOS update seems following message:

  + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

  My settings:
  -BitLocker is turned off.
  -No connection to a docking station
  -Windows 7 is installed
  -Boot mode is enabled? I guess that means:
  "Close all open programs, shut down windows and then turns off your computer."

  Any idea what is the problem?

  Post edited by: ML

  Hi ML

  Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
  Have you noticed a few issues or hardware issues?

• Portege R830 - error 3.9 update BIOS

  Hi all

  Portege R830 - 138 current BIOS 3.7

  I can't update the BIOS to 3.8 or the latest version of 3.9. Error: This computer is not supported.

  VAP is installed and modules work. A previous post on the forum suggested that it could be linked to the Intel firmware update recent Management Interface which I had asked and I am unable to uninstall or rollback.

  Any suggestions?

  THKS!

  Hello

  One of my friends has updated the BIOS from 3.7 to 3.9 without major problems.
  It might be possible that you cannot update the BIOS because of missing or disabled TVALZ services.

  Go to control panel of control-> the Administrative Tools icon, and then click services.

  Here, you can check if the TVALZ service is available, if it is available, turn it on and then try to update the BIOS.

  If this does not work, you will need to retrieve the laptop using recovery disk or recovery disk that the BIOS update should functions using factory reset Toshiba

• Portege R830 - forcing mobile broadband using 3 G/HSDPA with Win 8

  Hi all

  Updated my Portege R830 to Windows 8 without problem.

  Given that most of the Wireless Manager functionality has been moved in the Windows, I can not find where I can "force" the connection to 3 G/HSDPA.

  I live in an area where the signal is insufficient and if I let the network default settings, it frequently goes to the strongest EDGE connection. I connected with Wireless Manager, using only 3 G/HSDPA where 2 bars were sufficient for everyday tasks.

  Moments of light bulb? (Travel is unfortunately not an option... ;))

  Hmm, I think that this parameter isn't available in 8 Win.

  Microsoft provides a nice article on configuring broadband to help to win 8 and mentioned configuration isn't it:
  http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

  From my understanding the best signal to broadband will be selected and used if it is available.,.

• Need to check the update of the BIOS Portege R830 without Intel TXT

  Hello Forum,

  I have exactly the same problem as described here 2 years ago:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65519

  I need to update my BIOS, but I can't because the update of the BIOS told me that the Intel TXT is enabled.
  Unfortunately I can not disable it in my bios. Its just not selectable. The 'cursor' jumping just above him.
  I can only 'hide' which does not help.
  I have the same thing for the VT - x and VT - d setting in the BIOS. Is not selectable or editable as well.

  TPM is not active if...
  I installed after infineon and he tells me I need to enable the TPM in the bios to use. :-(

  I have a very old Bios Version 3.1 and I read in the changelog that there are a lot of TPM in v 3.4 and 3.5 related changes...

  In any case...
  A P007Dv360A_EC77V140.zip file has been transferred to 2shared.com who fixed it at the time, a user named Paolo30.
  Unfortunately, that this file has been deleted on 2shared.com

  can someone please provide this file (or an update of the bios later) which resolves this issue?
  Thanks in advance.

  Portégé R830 - 10 p belongs to the series of PT321 if you need the BIOS for Portege R830 PT321

  You can download older versions of pages driver Toshiba BIOS.
  For example: http://www.toshiba-asia.com/sg/support/drivers

  On this page of Toshiba Asia I could find all the BIOS for this Portege model.

• Portege R830 - updates BIOS and USB 3

  Hi all

  I have a Toshiba Portege R830, business management Windows 7 (SP1) 32-bit (for work).
  I also start Linux Mint 14 64-bit, that I installed it on a portable USB HDD (non-professional).

  I recently bought a 3 USB HARD drive, but when I connect it to the USB 3 port on my R830, it gives me only USB 2 speeds (25 MB/s).

  I checked with some diagnostic utilities (usbdeview, etc.), who say that the drive is connected in USB 2.1 mode.

  The drive reports itself as being 3 USB, cable is USB 3 (SuperSpeed) and the port that I use on the R830 is 3.

  I feel the same way, if I boot on windows or linux.

  I've updated all the drivers on the two operating systems, does not.

  then I tried to update the BIOS, but I get the following error:
  "An error occurred during the preparation of the updated environment.
  You have not given the permission to execute the update".

  For the record, it's the BIOS I'm leaving, & to.
  BIOS version: Current Ver.2.80--> updated Ver.4.10
  THIS Version: Current Ver.1.10--> update Ver.1.60

  Does anyone know why I wouldn't get USB 3 speed (which, for my drive, are expected to be around 40-50 MB/s), or why all the diagnostics say USB 2?

  Does anyone know how to overcome the problem of updating the BIOS?
  (I tried in safe mode, disable AV, disabling NX)

  See you soon

  This USB driver is installed?

  Please try to install it and check again speed USB.

• Satellite R830: How do the BIOS settings password protected?

  Hi all

  I installed a software protection against theft in my Satellite R830, but he suggested that I adjust the settings in the BIOS so that it will start only from the hard drive, and to make sure that no one else can modify it (if it is stolen), the BIOS settings are protected by Word.

  Can someone tell me how to access the BIOS at startup settings upward?

  Hello

  You can set the BIOS settings by setting the BIOS password.
  If someone would like to change the BIOS settings, the password of the BIOS would be necessary.

• Portege R830 - problems of 3G connection after installing Win 7 32 bit

  Hello

  I went down a Portege R830 Windows 7 64 bit for Windows 7 32 bit with drivers of Toshiba. I put a SIM from my provider.
  In the windows Network Manager, 7 and in the Toshiba Wireless Manager I can see the right provider and HSPA network but when I start the connection, it does not (I don't have a PIN code).

  It is failed with Windows 7 Network Manager and Manager Toshiba wireless (I don't have this problem with the Portege R700 windows 7 32bits)

  But I found a small solution (but I think that's not enough):
  I have created a dial-up connection, with a number * 99 #,.
  I started the connection, it does not happen, but after that, when I raise my first connection is good.

  I don't know why, it's as if the modem is in sleep and the dial-up connection wake-up the modem, because after all is good (win7 Network Manager, Manager wireless Toshiba) so if I reboot the Portege.

  I want to avoid the dial-up connection on my r700 portege with 32-bit windows 7

  Thanks for your help and sorry for my English.
  support for the toshiba told me to reinstall windows 7 64 bit to solve the problem :)

  Hello

  Are you sure that you have correctly configured the connection?
  Here is a nice FAQ that explains step by step how to connect 3G using the Toshiba Wireless Manager:

  + How to configure and set up a 3G connection via the preinstalled Toshiba Wireless Manager +.
  http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

  and here you can find instruction how to create dial upward of connection using own configuration of Windows.

  + How to create a Dial-Up connection with 3 +.
  http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

  Recommend check them both!

• Re: Portege R830 eSATA - failure to mount the external hard drive

  {color: #000000} I have a new Portege R830 with combined eSATA / USB port. It will recognize an external drive in as drive 0 Device Manager but does not mount the drive under Win 7 x 64. The road rises and works absolutely normally under USB2 via the combined port or one of the other ports on the PC. The player works absolutely normally under eSATA on another desktop PC Win 7 x 64

  Search Internet suggests that this is a widespread problem with Win 7, but given the above commentary to normal operation on my desk, strongly indicates that it is "simply" a laptop Toshiba driver problem Win 7 x 64.

  A workaround solution that someone had reported was to boot the PC with the drive connected. This will lead to the PC mount the drive, but I found to be unreliable - tends to freeze the unpredictable machine, but when logged in it showed he was transferring data at a reasonable speed.

  The search for these forums, no solution has not identified... Toshiba - think you should answer it please!

  Afetr all is a 'feature' significant on the Portege and rather defeats the point if it is impossible to use...

  Kind regards

  Kevin {color}

  Hi mate

  First of all, it is a forum for a user to this don t address issues from Toshiba here in the forum, but other users of this community.

  Back to your question; Does this mean that the HARD drive connected to the eSATA port cannot be recognized as device eSATA but USB device?

  Please check if you are using the latest version of the BIOS. On the European driver Toshiba page, you can find the BIOS version transferred to 29/07/11.
  In addition, I recommend to check the BIOS settings; check if eSATA is activated it.

• Portege R830 cpu usage

  Hello!

  I recently purchased your Toshiba Portege R830 product for 4 days, and I notice some CPU usage when I start the computer and a bit of fan noise.

  Is it normal in the computer? Something related to the series?

  I followed the advice in other threads:

  Bios update
  updated fingerprint driver

  and seems to not work...

  Should I change some settings in the bios?

  Please can you let me delete this topic?

  Thanks in advance

  Hello

  You can try to disable the fingerprint in the Device Manager or simply remove the software of fingerprint for testing purposes.
  In addition, please also check the table below for recommended settings of power plane:

  * 1st proposal: *.
  Cooling method: Maxim Performance
  Intel Turbo boost Technology: activate
  CPU frequency mode: always low

  * 2nd proposal: *.
  Cooling method: optimized battery
  Intel Turbo boost Technology: disable
  CPU frequency mode: always high

  Here you can find the simple options:

  
  Changes in the operating system:
  --> Power Options control panel--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method

  Changes in the Bios (power management):
  Intel Turbo boost Technology

  Changes in the operating system:
  TOSHIBA HW Setup--> the CPU frequency mode

• Portege R830 - Download Cant PT321E value added package driver.

  Hello!
  I can't download the toshiba.eu/support/drivers/laptops/ driver for

  Toshiba Portege R830 - PT321E
  Windows 7 64 bit
  Location - Latvia

  Download keeps failing sometimes to 10% to 50% complete.

  Sometimes the page is inaccessible. Tried to download the driver of different networks.

  Thank you.

  Today, I tried again to download the driver package. Downloaded without any problem.
  Wasn't the best place where to post about him, but I couldn't find it on the page where I can report problem Web page technique.

• Portege R830 - functional keys not working after installing Windows 7

  Hello
  I have Toshiba portege R830.
  I install new windows 7, no recovery - new windows.
  Now, I have a problem because my function keys don't ' t work.
  I can't turn on y wifi with fn + F8.
  I was looking for drivers, but I don't ' get there for my toshiba.

  Originally posted by Tomasz
  

  Hello
  I have Toshiba portege R830.
  I install new windows 7, no recovery - new windows.
  Now, I have a problem because my function keys don't ' t work.
  I can't turn on y wifi with fn + F8.
  I was looking for drivers, but I don't ' get there for my toshiba.

  Have you installed the VAP (value added package)

  That should restore the functionality of your

• Portege R830-10v / i7 / change internal SSD 225 GB

  Hello

  I need to change my flash drive SSD internal 225 GB for a 512 GB SSD!

  What should I do to the hardware and software level?
  Can I take any SSD?

  Thanks for the help?

  Best regards, Florence

  The HDD or SSD drive update requires no special modifications in the software or hardware.
  You need a compatible player SATA SSD 2.5.

  Here is a nice and very useful document how to upgrade / replace the Portege R830 & Satellite R830 series SSD or HARD disk drive.

  http://APS2.toshiba-tro.de/KB0/CRU18037E0000R01.htm

  Of course, after this upgrade, you'll need to install the system new the best choice would be its use or recovery disk and recover the laptop to factory settings.