Re: Qosmio F30 - 112 - special buttons do not work after Windows 7 upgrade

Hello world

I upgraded my Toshiba Qosmio F30-112 from XP to Windows 7, everything is ok. The only problem is with the buttons its does not work none of them (play, record, stop, pause, BRIGHTNESS-, BRIGHTNESS +, dolby, etc.)

I installed the value added for windows vista, nothing changed still having the same problem.

Hello

There's a PPV for Win 7!
Of course, you have to look at other portable series which were the VAP for Win 7 has been released.

Usually does not VAP for Win 7 depend on portable model so I think you could install VAP for Win 7 released for other series.

Good luck

Tags: Toshiba

Similar Questions

  • Qosmio F30: Toshiba control buttons do not work on Vista 64 bit

    Hello everyone

    I have Windows Vista 64-bit installed on my Qosmio F30, but before operation buttons do not work.
    I tried to use the 32-bit configuration of Vista drivers, but when I press it, I got the following error: "this function not taken in charge.

    So please can someone help me to overcome this problem.

    THX

    Hello

    You cannot use these Toshiba control buttons (play, pause, etc.) because the necessary drivers are not installed.

    You will need a compatible Vista value added package, but it seems that Toshiba page does not provide the 64-bit VAP but only the 32-bit version.
    The problem is that the software for Vista 32 bit does not work on Vista 64 bit OS.

    In my opinion so there's nothing to do right now

  • Qosmio F750 - touch buttons does not work after Windows update 10

    I use a laptop Qosmio F750 (PQF75A-02Y00Q).

    Installed on the computer the previous operating system was Windows 7 Home Premium 64-bit. Then, I upgraded the operating system to Windows 64-bit edition 10.

    As expected, this change would cause problems to appear. The thing that is really bothers me right now is that the touch of the keys in the top right of the keyboard do not work as expected.

    The buttons respond always if you touch them, but they do nothing on the screen. for the most part. When I touch the Volume Up / Volume keys down, they work as expected. However, the key Mute, the button Play/Pause, the Wifi key on / off and Mode (as well as the key to toshiba bulletin board) eco button do nothing.

    Curiously, when I manually turn eco mode from the power settings mode eco button again turns the green.

    My last question is, how can I fix this so that ALL keys work as expected?

    -----------------------------------------------------------------------------------------------------------------

    I noticed that the recognition facial webcam was funny things as well, but everything what needed to be done was to recalibrate the installation for that to make it work again.
    Curiously, all the FN key functions work well.

    In addition to the question in bold, there are all the other drivers should I install to improve/restore functionality to my laptop? As the page of Windows 8?

    Hello

    I have the same problem since update 8.1 and now after 10 update, even more I lost the 3d display function since I updated to 8.1.
    MY QOSMIO is PQF75E-F750

  • Qosmio F50 - FN keys does not work after Windows 7 upgrade

    Hello

    After installing Windows 7 my 'FN' key doesn't work anymore. The big problem is the upgrade to Windows 7, I turned off my touchpad using "FN + F9". Now that my FN key work and I cannot turn my touchpad.

    Is there a way to reverse without using the "fn"? And is there a way I can fix my FN key? Accessible from start > all programs > Toshiba > utilities > accessibility does not work. Is somehow connected? What can I do?

    Feedback and assistance is greatly appreciated.

    Hello

    Here's a similar thread on the Qosmio F50 with Windows 7 issue where the don t FN keys work:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=184578𭄂

    If you must install the package of added value and utility to Support Flash Cards, but you must choose a version that is available for Windows 7.

  • iPhone 5 home button does not work after ios 10

    My 5 Iphone Home button does not work after update final IOS version of 10.

    The home button works on the first push to wake the phone but it will not open the phone the second button.

    I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

    You attempted to restart your phone?

    You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

  • Delete buttons do not work after the update of 10.11.16.

    Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

    Any suggestion would be appreciated.

    Greetings, r.fromstouffville!

    It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

    Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

    Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

    How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

    Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

    On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

    Thank you for the communities of Apple Support!

  • Envy 15: Airplane Mode button does not work after update of Windows 10

    My airplane on my HP envy mode button will not work after the upgrade to Windows 8.1 for Windows 10. I can turn on and off airplane Mode but not the button. Grateful for the help

    Hello:

    The only suggestion I can offer would be to see if installing the W10 wireless button driver solves the problem.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_150986_1&swEnvOid=4192

  • Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

    The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

    When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

    Additional resources:

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

  • "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

    Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    Which edition of Windows 7 is installed on the machine?

    Which edition of Windows 7 you are trying to do an Express upgrade to?

    Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

    ---------------------

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

    I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

    However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
    "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    What should I do?

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • Qosmio F50 - bright/Fucntion keys do not work after update BIOS buttons

    OK... I read a similar post and has FACT EXACTLY what IT SAID TO DO... He solved half of the problem or less... after the update to the new bios that I'd like speed or make my Qosmio energy gave me problem from the first day I installed it...

    The reason why I upgraded to was I thought he could solve my problem of flash memory card. They NEVER APPEAR AFTER REBOOTT... I ALWAYS HAVE RESTART THEM IN THE WINDOWS MENU... I thought that if I do a scheduled task. This would solve the problem. Guess what... It SCREWED my windows calendar place... a mistake self-protection
    This brings me to install the new bios... After you install... He has created ONE MORE PROBLEM, INTOTAL - TWO
    (1) KEYS INFORMED DON'T WORK
    (2) FLASH CARDS DO NOT WORK
    After following the instructions of a thread posted here... He told me to remove the VAP and reinstall... Guess what... it solve the key problem... but MY KEYYYYYY FUNCTION... I restored my pc... He said if your function key is disabled... GUESS WHAAT AGAIN... THE FIRST PROBLEM TO... ILLUMINATED KEYS DO NOT WORK... I later discovered that I can't have both things at the same time according to the instructions... Oh Yes... I forgot to mention;... CARD FLASH showing... shut up has never shown... restoration takes me to the original problem...

    I think down my BIOS version that might solve the problem but can't find it... I don t want to restore because I might install additional software like the game... Assassin s creed... BTW... It works AMAAAZZZINNNN... but the multimedia and function keys keep on bugging me
    I have a Qosmio F50-126 with Vista 32 bit...

    Try:

    Reset the BIOS to its default settings.
    VAP to uninstall and install the latest version from the Toshiba site.

    PS I think you can change the lighting in the BIOS, have you checked this setting?

  • Control buttons do not work after the new installation OS on Equium A100-147

    After Installing Win XP manually, I am facing problem for the multimedia keys on the left side of the laptop work.

    I am able to access the first button to launch Internet Explorer and Windows Media Player but still keys Play/Stop / > /.< not="" working="" with="" windows="" media="">

    I read in these forums that these keys work only with WinDVD or Windows Media Player with CD/DVD in. But I was able to use these keys with MP3 files in Windows Media Player.

    I don't want to use the restore CD.

    Thanks for your reply.

    Hello

    Of course you can use it with mp3 files. The files are probably listed in the WMP library, and you can use all of the buttons. There is nothing unusual.

    If you cannot use all those buttons in WMP when music CD is in the drive or you if the WMP library is open I recommend you remove TOSHIBA controls reboot the device and install again. Maybe it will work again.

  • Satellite U500-1F5: eco and FN buttons do not work after BIOS update

    Hello world

    I hope I can find a solution for my problems here.

    I bought a new Toshiba Satellite U500 (PSU9ME),
    I'm updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center.

    Last week I received an alert to updat the BIOS and I did. Since then, I've noticed the following problems:

    1 eco utility does not work, and when I tried to uninstall, it says (not supported BIOS)
    2. on screen funtion buttons that appear at the top of the screen when you press the Fn key no longer not apear
    3. the touchpad lock / unlock button does not work, and even by pressing Fn + F9 doesnot lock

    I hope you can give me an answer about my problems,
    I already downloaded the latest updates for the eco and value-added packege of the toshiba site and install,

    BUT

    does not my prob

    still eco utility does not work. The msg (not supported BIOS), appear when I run the update.

    The bar of buttons on the top of the screen does not (even after I uninstall the package of value of toshiba and re - install the last being) and the locking/unlocking back touch button does not work.

    I hope Toshiba can find me a solution, coz I don't have time to go to the DEPOT
    PSU9ME00D00XAR model U500-1F5

    Windows 7 (64)

    Thanks in advance

    Hello

    First one comment:
    * I am updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center. *
    That s is nice, but certainly not necessary. When the system is working, do not touch or change anything. Maybe stupid sounds now, but I recommend you to remove the TEMPRO system. Believe me you don't need. I have 2 years old Satellite A300 and original BIOS. It works perfectly and I don't want to take any chances and to change what anyone. Since last month, I have the Satellite U500-1EX and will do the same. TEMPRO is already removed, and I am happy with the factory settings.

    All that you have done is OK, but at least you can try to reinstall entire OS now using HDD recovery option (F8 at startup) to see if everything works well again. Sorry, but if this will not help, I think that you need the BIOS downgrade to the old version.

  • The scan button does not work on Windows XP Media Center edition 2005

    Name of the printer: hp psc 1350 all-in-one

    Hi, this is happened since I reinstalled the operating system with an OEM disc, removing all the hp stuff. I got a new OEM drive that comes from hp (I think... well hp stuff works now) but the scan button does not always work. The old record was kind broken.

    I don't mind, but it will be useful, if it could be repaired. Don't want to do something big, would rather just not fix that to do something does not.

    Note: Scanning works, but I have to look somewhere else (e.g. opening scan in the Panel)

    OK, that explains why the scan button does not work.

    The complete software is required for the scan button to work, it is not a feature of the base software.

    Be sure to follow the steps below in order to get is torted:

    1. Unplug the USB from the printer.
    2. On the start menu, enter the HP folder. and follow the link to uninstall to remove the current software.
    3. If you don't find it there, go into control panel > add or remove programs, and remove any software installed HP PSC 1300 series.
    4. Download and install the full feature below:
      http://ftp.HP.com/pub/softlib/software10/COL8901/MP-23606-3/gc_w01_ENU_NB.exe
    5. You will find the Director of HP under the HP software. If you have problems using it, make sure you install the following hotfix:
      http://ftp.HP.com/pub/softlib/software8/COL17377/OJ-46104-1/CIT207355-HPCOM-patch-V8.exe

    Kind regards

    Shlomi

  • Wifi button does not work after upgrade to windows 7 to windows 8

    Hi all

    I use a computer hp laptop pavilion. My wifi button stopped working after the upgrade to Windows 8. I installed the latest drivers wifi but the wifi button does not work on wifi. Help, please

    Concerning

    Wandi

    Hello

    I use a hp pavilion dv6 7030ei.

    I solved the problem of my wireless button not switching not wifi enabled or disabled. My laptops wifi button now works perfectly.

    I have has been Manager of access devices, then selected, network adapters

    -Click with the right button on intel Centrino Wireless - N 2230,

    -then click on uninstall and then uninstall. Restarted my PC.

    Then bang! my wireless button started working! I don't update this driver up to what Microsoft or intel acknowledges this problem caused by the wifi drivers 8 windows and provides an updated driver that is causing the problem I encountered.

    Thank you all for your comments.

    Concerning

    One_D

Maybe you are looking for