Re: Qosmio G30-194 - problem with the Toshiba Assist tool

Similar Questions

• Qosmio G30-194 - problems with sound in Vista

  I have trouble with the sound after instalation of Vista. Can someone help me?

  .and what sound disorder do you have?

  I m not surprised of your message. Vista needs specific drivers, and possibly the new driver audio update could solve some problems.
  Right now I have not found all the Vista drivers for this unit on the Toshiba Europe site
  It seems that we have to wait a bit for the release of the pilot, but we will have it I'm sure ;)

• Qosmio G30-126 - problem with the start screen

  My laptop was working perfectly until I suddenly found starting with sound activation boot but without any image appearing on the screen until I got the windows login page in which the image appeared with its normal perfect resolution.

  The operating system is Windows 7, which worked smoothly, with all the drivers toshiba, installed more than 3 months, and the device was normally closed the time before the problem occurred.

  I tried to use the restore disc but the problem is that I can't see something! the computer works, but the screen is black as if the laptop is turned off completely.

  I tried to connect an external one LG LCD but it gave no results, but only a screen empty.

  I really need help in this issue that this notebook contains all of my work and I very much count on it.

  Hello

  Can enter you the BIos (F2 on startup)?

  > I tried to connect an external one LG LCD but it gave no results, but only a white screen

  However, I think it is the dysfunction of the graphics card as your laptop work without any image that appears. In this case, you must contact the ASP (SAV) in your country:

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

• 4320 proBook s - problems with the wireless Assistant

  Hello

  I have my ProBook s 4320 for about half a year now. For most of the year the half I had problems with the wireless assistant - it seems that when I start my laptop it takes about 5 to 10 minutes before the work of the internet. I never changed any settings in the wireless assistant.

  Nobody does face these same questions and no one knows how the internet starts immediately when I start my laptop? I tried this on different places with different wireless modems, but everywhere, it's the same thing and books of other people can use internet immediately.

  Thanks in advance

  Hello

  You are welcome to help

  The fact that it connects properly in Mode safe indicates that the driver who normally starts with Windows or a program is causing the problem - most likely candidate is to begin by F-Secure.

  Before attempting the following procedure, make sure that you have an installation of F-Secure program, so you can re - install this software, and also a license key necessary to activate it.

  Then, from the windows control panel. Open programs and features, click on the entry for F-Secure once to highlight, and then click the option to uninstall at the top of the window.  Once done, restart the laptop.

  Again, when windows restarts, check the internet connection by using only a known secure site.

  Let me know how this affects the problem.

  Kind regards

  DP - K

• Problem with the Spot Removal Tool

  The last several times I tried to use the removal tool the place, he did not "heal" the area that I asked for it to heal.  He heals an area adjacent to the area I want to heal.

  Any thoughts on the opportunity, it's a LR bug or something is happening with my Macbook?  I would like to address...

  Note that I ALSO encounter this problem with the adjustment Brush tool.

  (I know I can do this sort of editing in PSCC but for simple stuff like this, I usually use LRCC)

  Thanks for your help! LJB.

  IMAGE: miniature horse headshot for a friend

  screenshot 1: weird grass, I would like to change.

  

  screenshot 2: the area I have hi-limited with spot Healing Brush (it's messy but the best I could do while also doing a screen shot and not to release the spot removal tool)

  

  Screenshot 3: the pin code of the area of selection is completely in the wrong place and my strange blade of grass is still there.

  

  Change the Clone in the Heal and vice versa does not move existing pine. You will have to redo the brush stroke after changing between Clone and Heal.

• problem with the color picker tool

  Hi there we use Fireworks CS3 and seem to have problems with the color picker tool.
  
  When we hover over a color and select it, we do not get the same color. Sometimes, we choose a blue color and it translates into a green.
  
  Also when we have a color for example chabouni and reduce the color so something lighter, he returned to the Carter.
  
  Can anyone suggest what might be the problem.
  
  This has only started happening recently and nothing major has been installed or removed from Fireworks.
  
  See you soon
  LTA

  Hi Alex,

  Im not sure if you said today or not.

  "Your a chamption!

  Thanks for your help, it works perfectly now.

  I must have accidentally clicked on the nod to the colors for the Web.

  Cheeers
  Malcolm

• Qosmio G10 - a problem with the cooling system

  Hello

  Put on my G10-100 this morning and got the following message:

  "A problem with the cooling system has been detected. "Please turn off immediately and the return of serve.

  My other machine running and connected on toshibas website and found the number of support.

  After which left a message there, the automaton response was "we aim to get back to you within the hour," Needless to say, it's now 6 hours later.

  I can't find whether on the web or in these forums, has anyone encountered this before?

  I'm still in my 1 year warranty, but he soon run out.

  Thank you
  James

  Hello

  This looks like a problem of overheating on your device.
  In this case, you must contact the ASP.
  I don't know if it's a phone number just to post you but please visit this m link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  You will find a Toshiba service partner who is responsible for your country.
  It should help you to solve this problem

  Good bye

• What is the problem with the BizTalk configuration tool?

  I just installed BizTalk Server 2010 (developer edition) and I restarted my computer, but the Configuration tool will not charge. Instead of loading the configuration tool, a dialog box displays saying "another instance of this program is already running" with the title saying "error". I am sure that no other instances of the configuration tool are already running. What's not here? If anyone can help me, that would be greatly appreciated.

  Hi NateKoepke,

   
  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems with the installation of BizTalk Server 2010. Please correct me that I misunderstood.
   
  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.
  http://social.msdn.Microsoft.com/forums/en-us/biztalkgeneral/threads/

• Problem with the rounded Rectangle tool

  I want to change the average RADIUS (right arrow) but now it's only let me pick 1 RADIUS and anything in between.

  

  You use a Wacom Tablet? There is a problem with the drivers Wacom causing the corners QUICKLY change which sometimes may appear as a step as if you quickly press the arrow key.

  This has been fixed for a version or two, then slipped in the.

• Qosmio G30 (PQG31) - problem with cloned hard drives

  Hi all!

  * Qosmio G30-154 * (* PQG31 *).

  Demo of the Qosmio has 2 hard drives with XP MCE (32 bit) installed on the primary.
  The RAID parameters are JBOD.
  BIOS is "newer" 3.90

  I would try to upgrade the drives (without installing any OS) and... have a problem!
  BSOD "Stop 0x0000007B" after 'clone with resizing' for the main HARD disk.

  I read on [drivers Toshiba RAID | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=48489] also [how to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm] and (or)
  [SATA and AHCI Intel Matrix Storage Management Software: "the installation program found no hard disk units installed in your computer" Error Message during Manual Installations | http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm], but I don't want to install OS, I want to keep intact my OS work.
  F6 (for all usb drivers) is not available to boot OS, sorry.

  "cloned" drive is in line with the correct name of made in the BIOS. "Cloned" secondary drive works (with old primary school). How to get access to the new primary OS and loading cloned? Please, any ideas?

  Thank you.

  Hello

  I think that the system cannot boot to the new HARD disk as the partition where the system is installed, was not marked as bootable system partition.

  I recommend to insert the previous HARD drive and to start the laptop.
  HARD drive new, cloned could be connected as an external HARD drive to a USB port.

  Then you should go to disk management (right click my computer - manage-> management-> disk management computer)
  Here you can see the HARD internal disk and the 2nd HARD drive connected to the USB port
  Right-click on the partition (2nd HARD drive) where the Win XP has been installed and choose the partition as the system partition and mark it as active.

  Then you could change the HARD drive again and could power the device in place. Usually, the system should boot to the top of the new marked system partition.

• Qosmio G40-108: problem with the highest starange display resolution

  I just had mine but on its highest resolution all Web pages have these 11 blocks rectangular semi, barely visible, only the bottom, each about an inch long, is this normal and should I send it to the object of an investigation?

  Hello

  It is very nice to hear that you already have the new Qosmio notebook. I can't say much about your problem because without a screenshot, it is not easy to understand what you mean exactly. On my Qosmio G30 (with the same HD resolution) I have no problem at all. Because of this I can't really understand what the problem is here.

  If possible send a link where we can see what it looks like. Your description is not enough.
  BTW: have you noticed that on web pages only?

• Problem with the Toshiba recovery process

  Hi guys,.

  I had some problems with my laptop and decided to return to the factory settings. But during the process, because of a few mistakes that I didn't understand, formatting process was broken and I guess that the recovery in my hard drive section was damaged. So, I could not use boot from the hard drive. Becacuse Toshiba did not give me recovery disk when I bought it, I had to boot the pc with cracked windows. I never use illegal software, but I had to do this temporarily. In any case now Toshiba has sold me an extra price, thank you Toshiba!

  Today, I had the cargo, and Toshiba Turkey sent two recovery disks. In the first disc, there are preinst.swm files under the ZZIMAGES folder. And in the second disc, there are some files named as bin, efi, planfolder, boot, sources etc.

  What should I know? Hot to go back to my original windows? And how can I do a recovery of these two DVD recovery usb drive?

  Thank you, best regards better.

  Any help pls?

• Problem with the Toshiba bluetooth stack

  Hello, I'm having a problem with toshiba bluetooth stack. I had windows vista installed in my laptop. I decided to upgrade to Windows 7. I got a bluetooth mouse attached to my toshiba bluetooth stack in windows vista. After the upgrade to windows 7 my bluetooth mouse is not working any more and it is not listed in the list of devices. But, when I turn on my mouse, the system battery bluetooth bar turns green as when the device is connected, but it does not work and the device is still not listed. I'm trying to redetect, but it is not detected. I tried to uninstall and reinstall the bluetooth stack, but in the reinstalling my devices are always listed.

  Can someone help me or tell me how to manually remove all connected devices? Thanks in advance.

  You have selected the option to remove all device configurations?
  If not, then please try it and then reinstall the Bluetooth stack.
  You can also do this via command line.
  Just run the following command as an administrator:
  MsiExec.exe /x "{CEBB6BFB-D708-4F99-A633-BC2600E01EF6}" / qn DELETEALL = 1

  In addition, remove the batteries from the mouse for several seconds.

  Right click on the Bluetooth system tray icon > Options... > Security > view paired devices
  Remove your entry for the mouse device when it exists.

• Re: Partitioning is a problem with the Toshiba recovery system?

  I'm french, so don't be afraid of mistakes.

  I wonder if I can I repartition my HARD drive I want

  First, I explain what I realized with the FAQ:
  If Vista wouldn't boot, Toshiba Recovery in WinRE (eisa configuration) hidden partition offer we have to fix, and then use the DVD burn or HDDRecovery directory in E: to repair partition.

  My question is if I don't have the DVD (or I lost it):
  If I can I repartition my HARD drive (not the partition recovery, but expand the C: partition to reduce E :) partition without causing problems to recovery?)
  In other words the recovery to the boot partition will update the position of recovering files in E:
  And if it works, can I just copy - paste the E: c: HDDRecovery then E: while I format E:
  Thank you for your answers

  Juju313

  Hello!

  If you copy the folder of disk recovery HARD complete with all the files it should normally work, but I do not know Mr. I had never tried it.

  But if you have the Toshiba disk recovery is on the safe side. So, you can restore the factory settings whenever you want.

  Good bye

• Problem with the Toshiba product registration after reinstall

  Hello
  I completely reinstalled my laptop.

  Now in the "begruesungscenter", sorry I don't know the English expression of the right and the notifications from Toshiba program says I ve to save my mobile on the Toshiba site.

  But I've already registered my laptop, is it possible to do it again? Or to change an entry in the registry, that the laptop is registered?

  Hello Stephan

  Sorry but described is not a problem and the subject of this thread is really bad. What you use is the recovery image. This recovery image is in fact the factory settings. It is a logic that begins each time after installation of operating own will be the same procedure.

  What you need to do is to interrupt the procedure of registration and complete the installation of the OS. If your laptop is already registered you must not do it again and again. I recommend to disable this automatic boot record (msconfig) or check if you can remove the system.

  Good bye