Re: Qosmio G40 - different processor speeds in Device Manager

Similar Questions

• Equium P200-11R: two different processors in my device manager

  Hello
  I have an Equium P200-11R.
  When I look at the system, the processor is shown as «Intel Pentium Dual CPU T2330 @ 1.60 GHz»
  However, in the Device Manager under processors I find; "Intel Core Duo CPU T7300 @ 2.00 GHz", then "Intel Pentium Dual CPU T2330 @ 1.60 GHz!"

  Why is there another treatment showing, (T7300)?
  I am extremely confused.

  Best regards

  Hi dude

  Don t you worry it s a bug of Vista simply.
  You must remove the CPU from the Device Manager, and then restart the laptop.

  After the reboot of the new Vista will recognize the NECK properly!

  Best regards

• Qosmio F750 - different keyboards appear in Device Manager

  I got a Win 7 startup failure with keyboard lock on which I was able to fix.

  Now my Device Manager displays the following information (which seems strange for me):

  Keyboards
  HID keyboard device
  Keyboard 109 MCIR Microsoft eHome
  Keyboard MCIR Microsoft eHome
  Microsoft eHome Remote control keyboard
  Standard 101/102-key or natural microcosm PS/2Clavier with HP QLB

  Could someone put me their settings in Device Manager so that I have a hint on how to rectify this.

  Thank you

  On my Satellite P500 I perfectly running Win7 64 bit and in Device Manager I entered the same keyboard, so I think everything is OK.

• different processor speeds

  The VI of ESX5i customer reports CPU as E5630 @2 model. 53 GHz but processor speed shows that 1.6 GHz. It is a machine of R 510 dell with BIOS version 1.5.3. What is the actual speed?  and why it is showing different speeds? Is there any logic or just a restriction on the side of the BIOS? Any response will be appreciated

  Thank you

  

  You may have low power settings configured in the BIOS, change in the configuration.

  Also look on the host computer in configuration / power management, you will see the settings for the processors in there, you can select the properties to change.

  I always set mine to performance in both contexts.

• Satellite P200 1 FT: different processors in the hardware Manager

  In Device Manager, there are two different processors (T7300 2.0 + T7500 2.2) listed. I thought that there must be two of the with each 2.2 GHZ T7500? !!

  This is nothing unusual ;) I read that it is a matter of Vista and it can be solved very easily!

  You must go to the Device Manager and remove the CPU entry in the Device Manager list.
  Reboot the laptop.

  After restarting again the Vista will reinstall the drivers and update the CPU entry in Device Manager

  After this short intervention, both processors should be recognized correctly.

  Best regards

• Why two different CPU in the Device Manager in Satellite P100?

  Poster my Core 2 Duo, as Device Manager:

  a T7200 2 .00GHz
  a T7600 2.33 GHz

  Please can someone explain what this means?

  Arjen.

  Because it s a Core 2 Duo CPU and the Windows OS shows two separate CPU cores.
  Don t, everything looks ok ;)

• Qosmio F50 - 12W - processor Quad HD not recognized by the operating system

  Hello

  I can't find my Quad Core processor in my device manager. It is not in the sound, video processors... devices were it suppose to be. (or as an unknown device). As it is disconnected or something. Is it a hardware error or there is a special way have recognized this system hardware. Even that I installed the driver says--> not found material, connect the material at any time in the future.
  My Spec:
  F50 - 12W - Vista32 Home Premium

  Thanks in advance for your advice.

  Are - this you laptop preinstalled with Toshiba recovery image?
  You can view Toshiba HD console in the windows sidebar?

  As far as I know for the coprocessor must be preinstalled Driver TOSHIBA Quad Core HD.
  Strange, it's that I can't find this driver for Vista on Toshiba download page. For Win7, the driver is available.

• Two different processors in Vista on the Satellite M-series(1M8) Device Manager

  I have two different processors in the vista Device Manager:
  first pilot intel core 2 Duo T7100 and second Core 2 Duo T7700

  What this means and how do I use it?

  Thanks Klaaus

  Hello

  This is a bug of Vista ;)
  Just remove the processors the Device Manager and reboot the laptop.
  After the restart new Vista should recognize and refresh the information in the CPU.

  Best regards

• Qosmio G40-10 s - driver software for device has not been installed successfully

  I get a message...
  Software device driver has not been installed successfully.
  Memory PCI controller... failed

  Is this a problem with my laptop or software that has been loaded. Now on Windows 7 32 bit Vista

  Hi spudcam,

  This means that for the memory controller PCI is no driver installed?

  Well, it is difficult to say which driver you need exactly and Windows 7's official is not compatible with the Qosmio G40.

  AFAIK memory PCI controller is Intel Turbo Memory module, so you would need Robson package driver of the official website of Toshiba.
  Now, I looked on the page of Toshiba and guess what, it s is available for G40 and Windows 7. :)

  Check this box!

• Qosmio G40: Can I use the infrared receiver SMSCIR with other devices?

  My Qosmio G40 was a "SMSCIR infrared receiver" to be used by the remote controller.

  I wonder if it is possible to use this receiver with other software. For my non polar, I need an infrared receiver to send data from the watch to the laptop. On my old system, I had an iRDa port, which has been used for this purpose.

  If I can use the infraed receiver SMSCIR, I don't have to buy me a new USB-IRDA device.

  Thank you.

  From my own experience, you can use the iRDA only with the supplied infrared remote control.

• Device Manager shows two different processors on Satellite P200 - 1 K 9

  Hello
  I just bought P200 - 1 K 9 and spotted (Vista 32-bit) Device Manager shows two different processors under the section of processors:

  Intel Core 2 Duo CPU T7300 @ 2.00GHz
  Intel Core 2 Duo T7700 @ 2.40 GHz CPU

  I expected to see the two excatly the same processors here.

  Vista recognizes in general CPU core 2 duo 2.4 GHz, BIOS too.
  What is on the Device Manager?

  Is there something wrong with the CPU? Should I return it better?
  Would you please check your processor in Device Manager (start-> right click on computer-> select Properties-> Device Manager) and let me know what you have?

  I'll start some live linux CD and check there too.

  Thank you
  Miroslaw

  Hi mate,

  the you´ve got problem is not a problem. It s just a simple bug in the Vista Device Manager and hardware abstraction layer.
  Follow these steps:
  Remove the CPU from the Device Manager (uninstall just like any other device) and then restart windows. The processor will be indicated correctly next time you reboot the system.

  Welcome them

• Satellite A100-797: Vista Device Manager show different CPU speeds

  Hi all

  I had an an A100-797 with Vista Home Premium 32 Bit and I was cruising along the system properties. Via 'Control panel system->' I saw the spec CPU as

  Processor: Intel (r) Core (TM) 2 CPU T7200 @ 2.00 Ghz, 2.00 Ghz

  Then I checked the CPU the Device Manager section, he showed me two CPU

  Intel (r) Core (TM) 2 CPU T5500 @ 1.66 Ghz
  Intel (r) Core (TM) 2 CPU T7200 @ 2.00 Ghz

  Do you think this is normal?

  Hello

  Check this http://support.toshiba-tro.de/kb0/TSB6C01O70000R01.htm

  Good bye

• Qosmio G40 - upgrade memory to 4 GB

  Dear all,

  I want to upgrade my memory standard 2 GB (2x1GB, 667 Mhz) up to 4 GB. Clearly, I realize that only 3 GB (or something around) will be visible.

  * The question is choose what type RAM os and which brands/models best fit (price and performance-wise) *:
  (a) PC2-6400 800 Mhz
  (b) PC2-5300 667 Mhz

  _Would the system use PC2-6400 800 Mhz or could it be underclocked? _
  I read this thread (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28634) and seems that the part of the wire on underclocking has not been addressed.
  Does make sence buy PC2-6400 with a hope that with increased Mhz, performance will improve?

  There is a list of RAM tested brands/models and confirmed as compatible by Toshiba for purposes of upgrade? _
  The manual indicates that only authorized Toshiba RAM should be used, but I failed to find a list of approved... The RAM manufacturers offer different ideas (Kingston suggests PC2-5300, Corsair suggests PC2-6400), but I'd rather hear Tohsiba.

  * I would be grateful to hear from those who have done an upgrade if there is no improvement in performance! *

  Thank you all,.

  I can see in the last 5 days nobody have written anything, and I hope that I can offer just my comment to this. To be clear I have no Qosmio G40 but I hope we can discuss on the upgrade of RAM.
  That said Toshiba? Not much.

  For each model of laptop, Toshiba offers a list of compatible and tested RAM modules. For your computer model Toshiba laptop offers modules of DDR2 667 MHz RAM. 2 GB module has PA3513U-1M2G part number. I also recommend you to buy Kingston modules. Kingston offers products of high quality.
  I don't see any reason why Toshiba should test all the modules available on the market and create a list. If someone will sell own products, they must test it with laptops available on the market and have a good chance to sell own products.

  As I wrote before RAM in the manuals is being tested. To be honest I don't see any sense why use module 800 MHz on the motherboard with bus 667 MHz front end, if you can get the 667 MHz modules.
  What do you think?

  One last thing: to comment on this notebook 800 MHz just processor system Bus Clock speed (PSB) is 800 MHz.

• Qosmio G40 - Intel Turbo Memory issue on Windows 7

  The Intel Turbo Memory does not work in my Qosmio G40 Windows 7. I tried different ways to install the drivers but only the work of the Intel Matrix Storage Console.

  If I try to install the full Pakage Robson, the material remains marked as a problem in the Device Manager and the computer crashes every time he goes into mode 'sleep'.

  Is there a way around this, or should I disable this feature (which was working under Vista before)? thanx

  Hello

  This feature isn t so important because he doesn't make a strong performance gain, but in your case I would try to update the BIOS. Maybe it will work or let's say that the computer goes into mode 'sleep' correctly again. The latest version, you can download the Toshiba site.

  What Intel driver, you have exactly? Have you tried the Toshiba site?

• Two processors listed in device of my Satellite A200-1MD Manager

  Is of my Satellite A200-1MD, on the device, manager by clicking on the processors opens two processors (for my two processors).
  One is "Intel (R) Core (TM) 2 CPU T5300 @ 1.73 GHz
  the other is "Intel (R) Core (TM) 2 CPU T7200 @ 2.00 GHz

  IS IT NORMAL TO HAVE TWO PROCESSORS WITH DIFFERENT SPEEDS!

  Is there a problem with my driver software or what? Keeping in mind that when I click SYSTEM in Control Panel it shows me that the processor is T5300 1.73 GHz 1.73 GHz.

  I need to know if there is a problem with my laptop, because I think that she was not working fast enough.

  Yes, it seems this is a common problem of Vista.
  At first my laptop L30 CPU is recognized as two different processors with different speeds.
  You must remove the CPU of the Device Manager and have to restart the laptop.

  After reboot new and new CPU Device Manager installation displays the correct speed ;)

  Best regards and don t forget to assign ;) reward points

  Happy new year dude