Re: Question of memory Satellite L300D - 12L

Hello

I bought today the laptop above with 1 GB of memory installed, as a single unit of 1 GB. I already have 2 X 1 GB of the same variety as this laptop takes home, went up to install another unit, which gives 2 GB memory total.

The laptop does not recognize the additional memory installed unit, it does not matter which slot I put it, what unit I use, is the one that came with the machine or ones I had previously. Crucial.com scanner says that one of the slots is empty, while the system is not recognizing the extra memory.

They are the same as stated in the manual of instructions, and all have been tested on another machine, so I know they are ok, so what could be the problem?

Thanks in advance

Hello

Please don t get me wrong, but these modules of memory are obviously not one that suits. If I remembered little of people here on this forum reported on the same issue. There must be a compatibility problem.

Try to get the Toshiba or Kingston modules and they will work well. In your case, you should get the 2 GB module and improve it up to 3 GB.

Tags: Toshiba

Similar Questions

  • Satellite L300D - 12L does not work

    Hi, my Satellite L300D - 12L does not work.

    I was on windows and it came with a blue screen with white writing on it. I didn't see what he said.
    It turned off my laptop. Then it restarted. He got to the screen saying: start the system restart and start windows normally.

    I did the repair of launch option. He said windows loads the files then pulls up to the Microsoft loading bar then the screen turns white for centuries, just with the arrow cursor. I tried to leave two repair a normal but get the same.

    What can I do? Any ideas?

    Looks like Windows is damaged. I would run Recovery by pressing zero during power on. Backup your data first, because the rags for HARD drive recovery.

    Also check the RAM. www.memtest.org is a bootable CD or a FD

  • Re: Cannot find Win8.1 drivers for my Satellite L300D - 12L

    I tried to find a pilot outreach toshiba firmware for my windows by Satellite L300D - 12 L 8.1 Pro running. Anyone can find on for me. The toshiba website has not one as my laptop is not officially compatible with windows 8.

    Thanks in advance

    Hello

    I assume that your old laptop Satellite is not supported for Win8 or Win8.1.
    More info on what you can read on http://www.toshiba.eu/innovation/generic/windows8_1-message/
    Please check the compatibility of Toshiba matrix. Here you can find out whether your model is supported.

  • Satellite L300D - 12L: Error: MISSING BOOTMGR + HDD partition 2 corrupted

    Hello

    I recently bought my L300D - 12 laptop computer in a store Staples close to me (for use at the University). After about 4 months of use, the system seems slow, and yesterday, my laptop started giving me the BSOD messages whenever I tried to boot up the laptop and have to restart.
    I tried to use the safe mode to move all my files on a desktop computer and that seemed to work well sometimes even safemode could not start with a BSOD with [memory management error] coming and sometimes IQRL_Less or equal...
    I can also have accidentally deleted partition HDD 2... but I thought that it would be OK, because I had created a recovery disk already in the days following the purchase, and it works.

    So my problem is this, my laptop is now free of my files as I have carefully their saved with the storage devices removable mass via a defective safe mode; I have used the disk recovery... but clarification, I think I should list step by step what happens when I use the disk...

    (1) "Windows is loading files" (a black screen with a white bar at the bottom)
    Microsoft green loading bar 2)
    (3) utility recovery gray and white décor with "Recovery Utility" box telling me to choose a language (I choose English)
    (4)' Please select the item you want to install and click on [{Next >}.] Current recovery drive size is: 76GB (I choose then with "English (Windows Vista)" highlighted)
    (5)' WARNING: your hard drive will be completely erased. Do you want to continue?' (I click 'OK')
    (6) command prompt appears with the following...

    Verification of the HDD1
    HDD1 not found!
    Try to remove all possible partitions on the HARD disk letters 0...
    Try to remove all the possible partitions on 1 HARD drive letters...
    Microsoft DiskPark_Version 6.0.6001
    Copyright 1999-2007 Microsoft Corporation.
    On computer: MINWINPC

    Disk 0 is now the selected disk.
    DiskPart succeeded in erasing the disc.
    DiskPart succeeded in creating the specified partition.

    Partition 1 is now the selected partition.
    DiskPart successfully assigned the point of letter or get in the car.
    100% complete
    DiskPart successfully formatted the volume.
    DiskPart succeeded in creating the specified partition.

    Partition 2 is now the selected partition.
    DiskPart successfully assigned the point of letter or get in the car.
    100% complete
    DiskPart successfully formatted the volume.
    DiskPart succeeded in creating the specified partition.

    Partition 3 is now the selected partition.
    DiskPart successfully assigned the point of letter or get in the car.
    100% complete
    DiskPart successfully formatted the volume.
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    Copy the files of database recovery
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    HTMPREP...
    Boot...
    EFI...
    HDDPREP...
    sources...
    Tools...
    Bootmgr...
    1 file (s) copied.
    Original setenv.ini...
    1 file (s) copied.
    Warn the HTML...
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    Unzip the operating system and WinRE
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    Set RECO_info_GUID = A5CD0EA6 - 2 = 4E10-8C6B-4902928583FB 02c
    Set RECO_info_imagecount = 2
    Set RECO_info_partnumber = 1
    Set RECO_info_numsplit = 5
    Set RECO_info_bootindex = 0

    Copy of F:\06738XSP.swm to V:\HDDRecovery.SWImg [1/5]
    1 file (s) copied.
    Copy of the CRC files
    1 file (s) copied.
    1 file (s) copied.
    Copy of F:\06738XSP2.swm to V:\HDDRecovery.SWImg [2/5]
    1 file (s) copied.
    Copy of F:\06738XSP3.swm to V:\HDDRecovery.SWImg [3/5]
    1 file (s) copied.
    Copy of F:\06738XSP2.swm to V:\HDDRecovery.SWImg [4/5]
    1 file (s) copied.
    Copy of F:\06738XSP2.swm to V:\HDDRecovery.SWImg [5/5]
    1 file (s) copied.
    Setting permissions access to 'V:\HDDRecovery '...
    Unpack the WinRE...

    L ' ImageX for Windows tool
    Copyright Microsoft Corp. All rights reserved.

    100% step
    The image is applied successfully.

    Unzip the Vista operating system...
    Image x tool for Windows
    Copyright Microsoft Corp. All rights reserved.

    Progress: 0% audit of the Splitloader...
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    Configuration of Split charger
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    ERROR: No BCD on two or a partition!
    Press any key to continue

    (7) an error box comes up with

    "imagex.exe - Application error.
    The instruction at 0x776359c3 referenced memory at 0x527d838c. The memory could not be read.
    Click OK to terminate the program ' (I click OK)

    (8) at the command prompt, I press a key to continue. The cmdprmt stops and everything is empty...

    (9) I restart the computer
    (10) this happens on a black screan

    "BOOTMGR is missing".
    Press Ctrl + Alt + Delete to restart

    (11) the repetitions of cycle no matter how many times I run the recovery disk

    SO! I read a few issues with the recovery discs and most of the time the answers are buy one out of the toshiba site... my question is this...
    Based on my case above... do you think that the error is by damage or internal memory corruption?
    Is the recovery disk I can buy different from the one I created?

    WHAT ON EARTH IS GOING ON WITH MY LAPTOP AND HOW DO I FIX THIS!

    Post edited by: ArthurTYL

    Hello

    This error is interesting:
    > ERROR: no BCD on two or a partition!
    > Press any key to continue

    The BCd is the Vista bootloader which is necessary to load and start the Vista operating system.
    It seems that it is not found and so Vista will not start.

    The next error message saying: BOOTMGR is missing, press Ctrl + Alt + Del to restart would confirm my hypothesis.

    You said that your system slows down considerably.

    Possibly the HARD drive is faulty. I have only this one explanation.
    In your case, the warranty is valid, and I think you should ask the ASP in your country for assistance guys could check the HARD disk and other parts and could replace it.

    Good bye

  • Satellite L300D - 12L does not start from CD/DVD drive

    Hello.

    I noticed a couple of threads on L3x who sometimes won't start but have a blinking cursor.
    I also have this problem with my daughter satellite.

    It occurs when there is a disc in the DVD player. The PC does not start, I get a black screen with a cursor and the DVD flashes regularly as if she is trying to determine if there is a bootable disc inserted.

    I tried several discs with similar results.
    Everything that happens the DVDRW ejects, and I have to force a shutdown, then eject the disc immediately when I start her for it boot on Vista.

    Any ideas greatly appreciated.

    Hello

    Have you tried to boot from the recovery disk Toshiba?

    Fact is if you try to install the Windows operating system on the new laptop series, you must install either the drivers SATA or you must set compatible SATA to AHCI mode in the BIOS!

    That's why check first before you would contact any ASP guy to replace the STRANGE.

    See you soon

  • Problem of recovery Satellite L300D - 12L

    Hello

    I want to restore this laptop to factory default so its how it was when I bought it at the store. I tried now pressed key 0 key while turning on and don't get all the dining options. I also tried pressing F8 during the boot and see no possibility of restoration. I did a recovery cd when I bought it first, and the recovery partition is still intact. Can someone explain what I need to do. I put the disc and rebooted from disk and it goes into a recovery utility, but the only option I see is to reinstall windows vista, this will also be resintall all other software provided with the laptop?

    Thank you very much

    > I also tried pressing F8 during the boot and don't see any possibility of restoration. When I bought it first, and the recovery partition is still intact, I did a recovery cd

    If you want to use the HARD drive for the recovery procedure recovery you should press F8 immediately after that the laptop has been powered. This would allow a menu to the screen. The first option should be to fix my computer.
    Choose this option. Then a new window should appear and you may find the option called Toshiba Recovery or something like that.

    But if you want to use your created Toshiba Recovery disk to reinstall the OS and then simply start from this disk and follow the instructions on the screen. ;)

    Welcome them
    Jeffrey

  • Satellite L300D - can't watch movies using a Toshiba DVD player

    Hello

    I have a laptop Toshiba Satellite L300D - 12L and the toshiba dvd player has stopped working.

    The laptop is always able to recognize the dvd as the 'AutoPlay' box appears when a DVD is inserted and says ' DVD RW drive (e :)) "at the top of the follow-up to the title of the film.
    I then click on 'play the DVD using a DVD TOSHIBE movie'... and nothing happens.

    I tried several different DVD, which I know work in other laptops or DVD players.
    I tried by following this link...

    http://www.TechSpot.com/VB/topic27616.html

    and deleted the lowerfilters and upperfilters but that cause problems and I had to perform a system restore.
    I'm running out of ideas and I would like to be able to watch DVD on my laptop again because I don't have a TV or a DVD player.

    Any help would be appreciated.

    Thank you.

    Hello

    It seems that the CD-DVD drive can read the disc, but it seems that the Toshiba DVD Player cannot play video files

    Then maybe you should try to play the DVD using other software like Windows Media Player or VLC player download VLC player this small software and install it
    Then try to play the movie

    I recommend also to install the tool called DVD Player Update Check Tool that you find on the European driver Toshiba page.

    With this tool, you can check your laptop, if your DVD player needs an upgrade and if so, it gives you the download link for version upgrade needed.

  • Satellite L300D-10 q: I can find only one memory slot

    I want to increase the memory from 1 GB to 4 GB.
    However when I remove the cover I see 1 location with the current in module.
    The literature indicates there are 2 slots and it is expandable to 4 GB.

    Any help would be appreciated.

    Hello

    The Satellite L300D supports two memory for sure locations.
    The slots are placed at the bottom of the unit. You can find it in the middle. The slots are secured with a screw. Under the plastic cover, you should find two memory locations.

    Sometimes the second slot can be hidden under the first memory module

  • Satellite L300D-11V - after the installation of new, I have a few questions

    I had an accident important a few weeks ago, that came out the main partition on my hard drive (even if the other partition appears to be very well) and I installed Windows XP Pro on a new hard drive to install Windows 7 in the near future.

    I found some drivers which I burned on disc, and install them on my new drive hard but now I have problems with her laptop in some areas:

    -I can't the USB ports to work at all even though I thought I installed the proper drivers.
    -I can't access Internet via WiFi even if the Ethernet connection works fine and I thought I had installed the correct drivers.
    -The Touchpad works very slowly and in some cases, it takes an age to click on something like an 'X' button to close the software or anything else...

    Can someone tell me how I can solve these problems as well as to get my laptop fully operational with Windows XP Pro.

    Your Satellite L300D PSLC0E models is. I checked the Toshiba download page and your laptop is not supported for Windows XP Home edition operating system.
    Toshiba doesn't offer any driver tested for your laptop model.

    You have installed not supported OS and now you want to have all the hardware components work perfectly. How? Someone needs to find the drivers for you or what?

    It will be best for you to use Vista supported, you got as a recovery image. To install Win7 is good idea and I can imagine your cell phone will be supported and all necessary drivers will be available in the future.

    I'll do the same thing with my A300.

  • Satellite L300D - how to recover Vista without losing a data partition?

    Satellite L300D - 22K
    Code: PSLC8E-05500CCE
    Vista Windows (Home premium)

    HARD drive has two partitions (visible):
    -C: (Vista)
    -D: (data)

    After installing avast antivirus startup takes 20 minutes (corrupt file?, defective HARD drive?)
    Moved all my personal archives to the D: partition
    Don't know if I can create bootable recovery dvd´s (the system is unstable)

    1 * I´d would like to reinstall vista without format partition D * (where are my data)
    Find this guide for the HARD drive recovery process
    http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm
    Should what steps I follow?

    2 If the HARD disk is defective, how can I re - install supplied OS (vista) for a new HARD drive?

    can 3 not related to the above, I upgrade to Windows 7 (clean install)
    32 or 64 bit?

    Hello

    I'll try to help you.
    1 > I´d would like to reinstall vista without format the D partition (where are my data)
    > Find this guide for the HARD drive recovery process
    > http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
    > What steps should I follow?
    As far as I know on the second partition of HARD drive folder HDDRecovery is saved recovery image. When you start the installation of (F8 at startup) HARD disk recovery partition recovery image D will be installed on the C partition. In this case the D partition is not deleted. C just partition will be formatted before installation of recovery image begins.
    Just use F8 option and go fix my computer. Just follow the on-screen menu and choose the software factory default recovery option.
    > 2 If the disc is defective, how do I re - install supplied OS (vista) for a new HARD drive?
    After reading this question, I see you didn't read the document s user manuals. You need to create a recovery media (DVD recovery) and this recovery DVD you can use for recovery image installation if there is a problem with the HARD drive or you want to install original recovery image on the new HARD drive.
    3 > unrelated meanings, can I upgrade to Windows 7 (clean install) 32 or 64 bit version?
    Of course you can do it. Please visit the download page of Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp and check if all the drivers, tools and utilities are available here. Of course before doing this, create recovery DVDs.

    If you have any other questions you are welcome.

  • Connection Satellite L300D and wireless

    Hello

    My daughter shares one House with 3 others in college and they have Sky Broadband, they can all connect outside him, she has a Toshiba Satellite L300D 243 wireless network is visible but cannot connect.
    I talked to the sky and they said I need to change the wireless adapter for WPA encryption, someone at - it ideas how to do this or other ideas please.

    Concerning

    Richard

    Hello Richard

    First a general question: is there a problem with sky only or your daughter can not connect wireless in general?

  • Satellite L300D-10U - unable to connect to the internet using LAN and Win XP

    Hi all

    I had a very big problem with my card.
    I can t connect to the internet.
    I searched the forum but without any determination :(

    I did everything. I have checked ipconfig nothing, check the mode safe mode with local network nothing.
    Someone said too
    "(1) once the Ethernet is connected, power of the DSL Modem. Cycle." ("Some Modem picks up the MAC ADDRESS of the network card on where it was previously connected and restarting it redétecte this new")

    How to disable the modem?
    And another question: can someone tell me what works of LAN drivers in Sat L300D-10U on XP?
    I put t even know that :(

    Help me

    Hello

    The Satellite L300D-10U belongs to the series of PSLC0E and it supports the Realtek LAN card.
    LAN driver can be found on the page of Realtek.

    You ask how to disable the modem? I think you mean how to reset modem DSL
    Well, usually your modem should support an ON / OFF button simply turn it off and then turn it back on.

    If you are unable to access the internet then you should first check if your modem is properly configured and that the right data ISP (internet service provider) was used.

    Sorry, but that's all I can say right now I think you should just check your modem settings, make sure that the NIC is properly recognized and connect the model of the laptop using a LAN cable.

    All that s

  • Satellite L300D-12u: power supply works not - is threre a guarantee?

    Hello.

    Today, I was surfing the Internet when suddenly my laptop says, is no longer on electricity.
    I touched the power supply and the connector that is immersed in the laptop was very hot (not the big case which becomes usually hot, only the connector).

    I tried several times to make it work again to take a new start or cool connector, but it still does not work.

    To make sure, that it is the question of food, I used the power supply of my mother, who is similar to mine, and then it worked.

    So my question: do I have a warranty on my power supply?
    I bought my laptop to 29.8.2008 in Germany and is a Satellite L300D - 12u.

    Thank you for all the answers!

    Hello

    Adapter is covered by warranty for laptop.
    So if laptops warranty is still valid your adapter should be covered by the warranty as well.

    Visit this link for details of the guarantee:

    http://www.toshiba-tro.de/unitdetails

    Welcome them

  • Satellite L300D - new drive HARD and recovery USB loading

    I have a satellite L300D. The hard drive has failed. I have the recovery on a USB part. I bought a new hard drive and that you have installed in the laptop.

    I can boot the laptop off the usb and then when I try to do recovery it asks drivers for HARD drive or he asks the recovery DVD to be installed!

    Anyone know if there is something special I need to do to the new HARD drive?

    Thank you

    Hello

    Do you have created disk recovery or recovery memory flash USB using the Toshiba Recovery Media Creator?

    If you have created a recovery disk, you should recover the laptop using this disc

  • Impossible to find 2 divers for Satellite L300D

    I found most of the drivers I need on the Web site for my XP install on my laptop satellite L300D, however there are still two "other devices" in Device Manager with many yellow question marks by them (I've been told I need drivers to fix... correct me if I'm wrong).

    The two are:

    SM Bus controller
    Video controller (VGA Compatible)

    If someone could help me find the drivers I need to solve these two problems I would really appreciate it.

    Thank you

    Hello!

    I completely agree with Akuma. In your case, you the driver package to display on the Toshiba site. It includes 2 drivers you are looking for.

    Here you can download:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    After downloading start the installation file and follow the instructions on the screen. After finishing the installation you must reboot the laptop and that s all! :)

    If you have any other questions, please let us know.

Maybe you are looking for

  • Blackberry blackBerry ID Passport number

    Tried to change ID blackberry account to delete the old account; But unfortunately can not connect with new or old account, I would like a solution 10 TIMES WRONG PASSWORD HAPPENED after resetting there aws an error meesage. Then the phone is connect

  • I've been using this windows 7 since last year and now its not good 0xCOO4COO8

    Hi I used this windows 7 since last year that I got from curys on lin now its not good on that I get this code 0xC004008 the activation server is saying no good that I had to reaformat widws a few times but just this pc thanks tony

  • Previously purchased blackBerry App Worl applications smartphones

    Hello: I have a number of applications that I bought the BlackBerry App World via my computer until I found the app phone from BB App World.  My question is: it is possible to get these applications reinstalled on the phone as if they were purchased

  • After you have reinstalled Windows 7 Ultimate error isn't real OS?

    I had to completely erase my laptop HD and reinstall WIndows 7 Ultimate from my OEM copy. But he said that it is not authentic. What is even more strange is that he made two months after I installed it, which is zero logic. And it is certainly an aut

  • No return line

    Hello. I'm running on 11.2.0.2 12.1.3. I am trying to run sql like apps against certain points of view, but it returns results even though I know that the lines are there. Advice please?Thank you