Re: Satellite A200 - problem with generic AC adapter

Similar Questions

• Satellite A200 - problems with the AC adapter / CC

  Hello

  The problem concerns a Satellite A200 (PSAF6A-02H01N).

  Recently, there was problems with the laptop, taking several attempts to boot to Vista, it would lock up while loading or just hang and freeze just after loading Vista.
  But once it was up and the laptop running would be happy working for hours with the AC adapter is plugged in.

  The problem got worse now and the laptop will not load Vista end without crashing.
  We have now reduced the computer down to have only a problem when the power adapter is connected.
  The laptop battery will charge normally with the AC adapter is plugged in and the laptop on standby or off.

  The problem persists with the AC adapter is plugged in and the battery removed.
  The laptop will start and run perfectly with battery and no power adapter plugged. Once the AC adapter is plugged in the laptop indicates that the battery is charging and then after a few seconds it crash or freeze and the only escape is a full stop.
  The laptop will not work under the battery power for 30 minutes max.
  I checked the output voltage of the AC adapter and this seems to be a consistent 19.4 Volts.

  Is this only a problem of AC adapter or the problem with the laptop?

  Thanks in advance...

  The Canada Gazette

  I lifted the previous discussions on this problem and found one that was very similar, but unfortunately the user decided not to find the problem of the road, save money and buy a new laptop instead! Hmm. !! .. seems to me like this might be a prob. material. Maybe a new motherboard?... anyone have an idea of what are the costs for that perhaps? .. an ASP or decent technician backstreet?...

• Satellite A200 problem with SDHC card reader

  Hello
  in my notebook, I had two OS, Windows XP Pro 32-bit and Windows Vista Home Premium 32 bit and Win Xp card reader work well, read all types of (standard and HC) SD cards but in vista to read only the standard map: (.) I have install and tryied all drivers form my laptop and nothing: (.)
  My notebook and SD card is: Satellite A200 - 1IW PSAE6E and SDHC 4 GB Kingston.

  You have installed Vista SP1?

  Try this fix: http://support.microsoft.com/kb/949126

• Satellite A200 - 19L with WinXP OS - key Fn Visual control

  Hi all

  I have Toshiba Satellite A200 - 19L with OS WinXP (I found all drivers), but have a little problem with it:

  With previous (event with this under Win VISTA) Toshiba laptops when I was doing operations with a combination of Fn keys (for example Fn + F5 - for then between the LCD screen and an external display or a projector) I could see a few icons on the screen (for the example above, a series of 3 icons representing the LCD displays only the LCD + external display) External display only; the same was hapenning when you use Fn + F6 or F7 - brightness - I saw the brightness icon and a cursor moving upwards or downwards according to the used key combination).

  Now, with the XP drivers on my laptop, I have absolutely to the specific features of the Fn key combinations but HAVE a no. VISUAL CONTROL of them.

  Does anyone know HOW can I restore on the computer?

  Thank you guys!

  I have the same problem. It worked before, until
  probably a windows update has been mess up with the function FN + F5.
  I tried to update the driver for the graphics card from NVIDIA. Who knows...
  I try so many things, but it does not work.

  When I press FN + F5, I have only the choice with the icon of the LCD screen. Until I'm OCR a and OCR + LCD screen (they disappeared).
  I wrote to TOSHIBA, but no response. I read on many forums that much laptop Toshiba you have this problem.

  Could someone help us?
  Thank you

• HP ENVY23: PROBLEM WITH A WIRELESS ADAPTER

  Hello

  I BOUGHT THIS REFURBISHED DESKTOP PC. ITS BEEN WORKING REALLY WELL FOR PAST 1 YEAR, BUT SUDDENLY, NOW HE BEGAN TO HAVE PROBLEMS WITH A WIRELESS ADAPTER THAT IS RALINK ADAPTER. PROBLEM IS THAT ADAPTER WILL SUDDENLY STOP WORKING. SO I HAVE TO GO INTO THE DEVICES AND ADAPTER MANAGER DISABLE AND ENABLE FOR HER WORK ONCE AGAIN. SOMETIMES EVEN THAT DOESN'T WORK SO AFTER RESETTING THE ADAPTER, I HAVE TO TURN ON/OFF THE COMPUTER. I HAVE NO CLUE AS WHAT THAT CAUSES THIS PROBLEM. PLEASE IF ANYONE KNOWS HELP.

  Thank you

  AHMED

  P.S I JUST TRIED TO UPDATE MY WIRELESS ADAPTER DRIVER.IT ME SAID I HAVE ALREADY UPDATED DRIVER INSTALLED.

  Hi there @JUMRONI

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  Please report the number of complete product for your computer. Check out the following, if you need assistance with this information. How can I find my model number or product number?

  I suggest to start by checking your system for malware, as follows:

  HP computers - solve and protection against viruses on your computer (Windows 8)
  Spyware, Adware and browser hijacking software

  If that fix it, you're done, otherwise, you should check these:

  Troubleshooting wireless network and Internet (Windows 8)
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 8)
  1. press Windows Key + C
  2. click on settings.
  3. click on change PC settings.
  4. click on network on the left.
  5. click on manage known networks.
  6. click on the name of the network.
  7. click on forget.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  I would like to know if this works for you.

• After the upgrade to Windows 8, problem with teredo tunneling adapter says code 10 error and the device cannot start

  Original title: teredo tunneling adapter error number 10 on windows 8

  on my acer travel mate 6292 which I just upgraded to windows 8 pro recently got a problem with teredo tunneling adapter.

  It says error code 10 and that the device cannot start, it made me unable to use wifi on my laptop

  I tried to reinstall the driver but it just says: windows encountered a problem installing and he says its error code 10

  Please help me

  Thanks in advance

  Hi Samuel,.

  We appreciate your efforts to solve this problem. We will put all our efforts in order to solve the problem.

  Teredo is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.

  I wish to inform you that Acer has not released Windows 8 compatible drivers for Acer 6292 travel companion.

  I suggest you try to install the drivers for the card wireless in compatibility mode and check if it works. Check out the following link to download and install drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  The link below to download the drivers for the wireless card: http://us.acer.com/ac/en/US/content/drivers

  A Code 10 error is generated in the Device Manager in one of the following situations:

  1. the Device Manager cannot start the device.

  2. one of the pilots who needs the unit does not start.

  3 device Manager has sufficient information to recognize the error that spread upwards by the device driver.

  We could try following common resolutions to solve the problem:

  1. update the drivers for this device

  2 launch a service of automated troubleshooting

  3 contact material supplier technical support

  For more information, please see the following article:

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  http://support.Microsoft.com/kb/943104/en-us

  In addition, this article could also be designated:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-in/Windows/fix-network-adapter-problems#1TC=Windows-8

   

  Please answer us on the State of the question to help you further.

• Audio driver with Satellite A200 problems

  I installed XP + SP2 on a Satellite A200 successfully. I have downloaded all the drivers from the official site, but even though I installed the drivers for the sound card, the system does not recognize a sound card, no indication of speakers to the taskbar. Also, I installed the driver for the modem, but under the control panel modems, there isn't any modem.

  Hello

  I also had this problem on my Satellite A210.
  The problem was that I didn t install two important patches from Microsoft. * KB888111 and KB835221 *.

  This patch must be installed before installing the audio driver.
  If you have already installed the audio driver please remove TI (remove the soundcard from Device Manager).

  Then, install the patches mentioned and after reboot short you could follow with Realtek sound driver installation.

  This helped me and I'm sure he will also help you 100%.

  Goodbye & good luck

• Windows has stopped the device because it has reported problems. Code 43 with generic bluetooth adapter.

  Windows has stopped the device because it has reported problems. Code 43. Something with the generic bluetooth adapter. What should do?

  Original title: Please help

  Hi JovanaNesic,

  One of the motors controlling the unit notified the operating system that the device has failed in some way.

  Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If you have already run the Troubleshooting Wizard, you can view the documentation for the hardware for more information about diagnosing the problem.

• Satellite A200 - photo with Photoshop CS4 Extended problem

  Hello world

  I have a laptop Toshiba Satellite A200 and I tried to install Photoshop CS4 Extended yesterday.
  There seems to be a problem that every image that I raise looks like this http://www.flickr.com/photos/meg_and_fred/2990212103/ (image link to my flickr account to show what is happening)

  I've updated the ATI driver, uninstalled and reinstalled CS4 and its still does not. I also have Photoshop Elements 6, which opens the same images perfectly so it mus be a CS4 and A200 compatibility problem - does anyone know how to solve this problem, or what could be the problem?

  Thank you very much!

  Maybe you need to update your software Photoshop CS4 Extended.
  In my opinion, this could solve this problem because, as you said the picture can be changed correctly using the Photoshop Elements 6.

  I think that it s ONLY a problem of software Photoshop CS4 Extended.

• Satellite A200-1vp with Vista - code 39 of the CD/DVD drive failure

  Hello

  I was burning and watch DVDs on my Satellite A200 - 1 VP, with vista, since February, the last time I burned anything was a couple of weeks.

  Suddenly, there is a problem, no response when I insert a disc and my divx player says me no recorder found.

  When I am looking in the Device Manager I get the message 'windows cannot load the driver for this hardware' (code 39) "driver is damaged or missing.

  I tried to uninstall it and using the limit filter upper/lower of Toshiba, repair tool but on restart it still cannot install.

  Should I try the Toshiba Recovery Disc and lose a lot of that programs/files, as a last resort?
  Would this work?
  Anyone have any ideas?

  Here's an interesting article from Microsoft Knowledge:
  http://support.Microsoft.com/kb/270008/en-us

  You must first access the Device Manager and should remove the reader of CD/DVD from the list of devices.
  Then should access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and check if the CD/DVD drive would work again!

• BIOS on Satellite A200 problem

  I tried to reinstall the bios on Satellite A200, with no result. Now I can't even boot up the laptop. When I called the servise in our town, they say that this computer have only one way to the trash.
  This computer is 3 months old. What can I do with it?

  First of all: what do you mean by "resettlement"? !!! Tried it before and she didn't? Need a better explanation!

  I have sometimes prey that users here (or new users) just explain a bit more detailed problem!
  OK, if the laptop does not start then not entirely for trash.

  Another question: what service did you call? Who was a Toshiba Servicepartner? I think that if it is an OFFICIAL AUTHORIZED SERVICE PARTNER, then they wouldn say that your machine can go directly into a trash can...

  Proceed as follows to save your machine in the Trash:

  1. click on this LINK: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871
  2. search for the of SERVICE AUTHORIZED PARTNER nearest in your country and dial Don t the same as calling you before!
  3. call them and send your machine for them. They should fix your machine because you have always guaranteed on this subject.

  That's all.

  Good bye

• Closing in on the Satellite A200 problem

  Hello...

  I have a Satellite A200 with Windows XP Pro SP2 and sometimes there is when I have the OS it hangs for about 45 seconds, then start/stop start/stop. Meanwhile, the HARD disk it used a lot.

  In the user accounts from the Control Panel, I changed the way uses connect/disconnect (uncontrolled use welcome screen) when restarting the OS, I get the "Windows is shutting down" and "saving your settings" window and this window disappears. When the window disappears, I get this kick 45 seconds - 1 minute.

  I downloaded the profile "user hive CleanUp" of Microsoft and I still have the problem. I also disabled the system restore.

  Can someone help me?
  Thank you!

  You have a lot of files stored on your HARD drive? Or maybe a lot of programs installed? So in this case I recommend you:

  -clean your system with tools like "TuneUp" 2008
  -Defragment your HARD drive, you will see the evacuation is much faster with a defragmented disk (best result of defragmentation can be gained with "O & O defrag")
  -remove applications
  -get a registry cleaner and let them clean the reg for a huge log can slow down even a really powerful machine

  For example, some of my suggestion that should work...

  :)

  Welcome them

• Satellite A200-1s 5 charger (AC adapter) is defective

  Hello

  Several days ago my cell phone charger started broadcasting a few strange sounds like an ACE with a variable harmonic frequency. And at the same time that he stopped to load laptop.
  It's my favorite laptop and I'm really happy with it except this incident with charger.

  Laptop:
  Model name: SATELLITE A200-1 s 5
  PSAE6E-07903DRU model number
  Serial number. can be sent on request

  Adapter AC/DC (charger):
  Model: PA3290E-3AC3
  RN193 V85
  Output: 19V 6.32 A (6, 32a)

  Please let know us where I can buy the same charger or what model of charger can replace it? It's really unique and I can't find it on Amazon or Ebay.

  Hello

  You have posted a reference number for this adapter.
  Google just for this part number and I m sure you will get offers online.
  If you can get one from a Toshiba authorized service provider in your country.

  Welcome them

• Keyboard on Satellite A200 problem

  Hi, while hoping a bit of insight into what the problem may be with my Satellite A200.

  It started with one single key works does not, then one other has stopped working. Then I would press a key, but it would come with a different letter on the screen. Then it got really bad, I couldn't use the keyboard at all because of the random letters would seem I typed, eventually escalating to the point where letters would appear constantly on the screen when the keyboard has not been affected.

  Tried to uninstall and reinstall driver, did not help. Tried a usb keyboard which was great until tonight. Usb keyboard or the laptop keyboard are working when tapped, yet sometimes random letters appear on the screen.

  I was ready to replace the keyboard if it was just a problem of keyboard, but now I'm wondering if it might be the motherboard. Everyone knows the same or similar problem?

  Nothing has been spilled on the keyboard.

  Thanks for your help.

  It's very confusing when the keyboard USB doesn t work too. At first, I thought faulty keyboard, it must be, but I'm afraid there is a serious hardware problem and I don't think you can fix it alone.

  I recommend you contact nearest Toshiba authorized maintainer and ask for help.

• Satellite C655D - problem with recovery

  Hello
  I have the Satellite C655D-S5515 with no additional DVD.
  I want it back or fabric.
  When, during boot press 0, not getting no RECOVERY option not only choose the operating system (Windows 7 only).
  How can I make laptop recovery?

  At first, I must say that since a long time, Toshiba and many other manufacturers of laptop also, doesn t offer disk facility with new laptops. Recovery image is saved on the HARD drive and the laptop owner should create backup recovery, recovery media creation. Its operation is clearly described in the document s user manuals.

  In General, when your laptop has a factory settings and changes nothing, you should be able to begin the installation of HARD drive recovery. I don't know what the problem with your machine and what is the reason why this option is not available, but what you need now is the installation of recovery disc.

  If you don't you should be able to order it. For making this visit https://support.toshiba.com/repair?orderType=SFF

  Good luck