Re: Satellite A200 PSAE6E: cannot install Flash Cards - serial number incorrect

PLEASE, I CAN'T INSTALL THE FLASH SUPPORT UTILIY, ALL THE TIME AT THE END OF THE SAY IT CARDS
"SERIAL NUMBER IS INVALID '.
PLEASE I NEED YOUR HELP TO INSTALL

FN KEY DOES NOT WORK PLEASE HELP ME. WHAT CAN I PLEASE?
I'M USING VISTA HOME BASIC 32-BIT

PLEASE I NEED YOUR HELP.

Post edited by: niijosh

Hello

In most cases, the invalid serial number error message occurs if you try to install a utility that has been created for this series of portable.
You should check if you have downloaded the right tool.

But a question; You use the version of BIOS in Vista?
At that time European Toshiba page driver provides the Win Vista BIOS 2.60.
Please check this!

Also before that you would try to install Flash cards, you must install the VAP. Value added package contains tools needed and it should be installed first before installing Flash cards.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite A200 (PSAE6E) cannot install XP due to lack of HARD drive

    My English is not so good, so I hope you understand me.

    I have a laptop Toshiba Satellite A200 with Windows Vista Home Premium, but XP works better for me and I would go back to XP Pro NL.

    Yesterday, I started booting from the XP CD, but at the start of the installation windows say "we cannot find a hard disk.

    With google I found the laptop A200 may have a SATA HDD, en must have a driver for my laptop, so can Windows XP Pro began installation.

    But where can I find the drivers?

    The SATA driver is part of the Intel Matrix Storage Manager.
    This storage manager can be downloaded from the European of Toshiba driver page or from the page clean s from Intel.
    Readers of these two Web sites will work.

  • Cannot install elements 10, serial number incorrect

    I have correctly installed disc 1 and then realized that I should have installed disc 2 instead, since I am running Windows 7 64 bit. So, I disabled that I had installed, uninstalled and then tried to reinstall using disc 2. Now he says that my serial number is not valid. I tried all types of troubleshooting, I can find online. Trying to get help from Adobe was very difficult.

    What should I do now?

    I wish I knew that this disc 1 would be sufficient. Ended up having to do a technical support chat, which is shocking only took 10 minutes. Then, I was able to reinstall correctly.

    On top of disc 2, it says "to install for Windows 7 64-bit: start with disk 2. He also says "install for Mac OS: start with a 3 disc.  It says nothing about disc 2 being for Apple computers or tests of items. Now that I have installed the disk 2 and am Windows 7 64 bit, I'm going to run into problems when you try to use the program? I also installed Premiere Elements using the 2 disc...

    I don't want to turn off, etc. and go through this brand new if I don't have to. Thoughts?

  • Satellite A200 PSAE6 - cannot connect my iPhone wireless

    Hello, first of all I am sorry for my bad English.
    It is quite difficult to write in English.

    I have the Satellite A200 PSAE6 with Atheros Wlan.
    I'm trying to connect to my iPhone, but I couldn't.
    When I try the same thing with my other laptop it connect...

    Can tell me what is different or that which is wrong with my toshiba?

    Thank you for helping me.
    Best regards

    Maybe you didn't activate the card wireless network properly or maybe the wireless computer card laptop doesn't support the same WLan standard in the iPhone.

  • Satellite A200 - 2BH PSAE6E: cannot install utility support Flash Cards - serial number is invalid

    Hello

    first sorry for my bad English.

    Secondly, I have a Toshiba Satellite A200 - 2BH PSAE6E I changeg my Vista OS and I have a problem with "utility of Support Flash Cards. I can't install it.
    I have this error message "serial number is not valid" I don't know what to do.

    Thanks for your help

    Hello

    Error: the serial number is not valid, says that you have tried to install a tool that is not designed for this series of portable.
    Are you sure you have the right tool for the right laptop model?

    It could also be another reason for this problem that you tried to install the tool in the wrong order.
    Usually this also controls the FN keys and it requires installation of VAP first.

    Install VAP (value added package) and try again

  • Satellite A200 - 1 M 4: Flash Cards are dark and not transparent after update v1.1.7

    Hello

    You know Flash Cards is transparent and moving flashy when pressing the FN key.
    After that I downloaded & installed PVAT 1.1.7.see card Flash became a dark, not transparent and does not move when you press FN plus (watch suddenly when pressing FN).

    What's wrong?

    PS. I have A200 - 1 M 4

    Thank you

    Nothing is fake. It is simply a new version. Toshiba has offered this setting day and fixed a big problem. Using the latest version of Flash cards were very slow and it was very awkward. Toshiba has designed the new tool and transparency is no longer available.

    I hope that you know very well that these settings are in need of more resources and laptop runs slower. But in the end I wonder: is it so important to you?

  • Satellite A200 PSAE3E - cannot install the ATI graphics driver

    I have a Toshiba laptop Satellite A200 PSAE3E and on Vista, it tells me that my display driver is not updated (generic), even when I installed Toshiba Tempro it came.

    So I downloaded the driver and will not install ATI Catalyst, in the installation process it stops and tells me that it could not detect the compatible hardware.
    If someone knows a solution to this answer please problem.

    Hello

    It would be very interesting to know what model of laptop you have.
    I mean I want to know the additional number: A200-xxx

    What is the portable was really equipped with the ATI graphics card?

    You should check this again because I assume there is no installed ATI chip

  • Satellite A200-1NF - cannot install the DVD playback software

    Due to the failure of DVD player software, I uninstalled it. Then I downloaded the DVD drive to reinstall. The Setup program retains the display "this program cannot be installed on this computer.
    My model of laptop is A200-1NF.

    Thanks in advance for helping me restore the DVD player.

    Hey Buddy

    Just a question: what do you want now or what we should do?
    I mean it would be interesting to know what operating system you have and where you have downloaded the DVD player. Can you tell us the name of the software, please?

    What you can watch DVDs with other software? I prefer VLC media player. This s freeware player and can play a large number of audio and video files.

  • Satellite A200-TR6 - cannot install Vista SP1

    I have Windows Update automatically installs updates the value, but it fails to install SP1. Specifically, I had SP1 in my file "Updates on hold" for a few months now, but it never installs. When I try and do it manually (as in by selecting 'Install now'), he goes through most of the process and then said it didn't and he'll try again. It restarts, try to install it again, then after 45 minutes reports that it cannot.

    I remember reading somewhere that it was due to an incompatibility with the driver for the built-in webcam, but there is never presented solutions. Any ideas?

    Hello

    I think that you need to check only this article in the Microsoft Knowledge Base:
    http://support.Microsoft.com/kb/947366

    Welcome them

  • Satellite A200-PSAF3A cannot install XP SP3

    I have an A200 - PSAF3A laptop computer which came with Windows vista, but also a disc provided by toshiba downgrade to XP. I used the disk and followed the instructions to downgrade to XP Prof SP2 successfully.

    I am now trying to install XP SP3 as an update and it progresses the installation in the "back up the registry ' step and then fails and I get a message"service pack 3 put up error".»

    I used the information on the microsoft Web site trobleshooting and none of these solutions have solved the problem. (BTW - there is another 20 XP SP2 updates that also won't install!)

    I would like to solve the installation of XP SP3 - all the tips would be appreciated.

    Thks

    Hello

    I doubt that there are those who might say why you could not install SP3.
    Fact is that the installation of SP3 should functions and it s any laptop you are using. It is not in the laptop!

    In your case, I recommend to clean the BONES and the registry using CCleaner.
    Then you must download the full pack of SP3 and it need to store on the HARD drive.

    After which allows to launch the update exe

  • Satellite A200-137 - cannot install windows after the hard disk crash

    last week my a200-137 crashed and now I have the new hitachi 500 GB hard drive on it, even before the accident.
    I have install with Toshiba recovery DVD windows Vista on it and after succesfull installed I have to start windows, it says prepare for first use windows then I have to wait a while and then I get the message that windows setup is not complete. But it is complete!

    After trying to install 3 times with recovert I tried to install windows xp.
    After a few minutes and transering files, I don't get the message no disc found! It is said that there is no hard drive on the laptop!
    But when I start the start menu or the settings menu, I can see the 500 GB Hitachi hard drive!

    So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?

    > So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?
    On this virtual path, it is not easy to say why you can not install recovery image. It would be interesting to know if the same thing will happen when you replace the HARD with the same or identical.
    This title was the original HARD drive?
    If possible, try to get original Microsoft installation disc and check if the HARD drive will be recognized by Vista or Win7 and of course if you will be able to install and boot OS preinstalled.

    Regarding the installation of Windows XP Home edition: it is well known that the WXP installation will start properly due to lack of SATA driver that must be loaded prior to installation of WXP begins.
    Check out this forum and you will find hundreds of threads with detailed explanation why this happen and what can you do about it.

  • Satellite A200-1Z3 - cannot install Windows XP Home edition

    I tried using Nlite, and "slipstreaming" manually manually hard detected and installed windows, but when the window trying to load the first time, a blue screen come up with the error «a recently added material may collide,...» "blah blah... After this reboot of Windows. I tried several times but same problem.

    I put request manufacturers to Toshiba, please, please do not force Microsoft Users to use VISTA, since very heavy graphics, but Toshiba put only 1 GB of RAM in A200-1Z3.

    I want to downgrade XP, please help me how can I install XP and load the first time?

    Hello

    Do you use Windows XP Home with SP2 integrated edition installations CD?
    What about the RAM. If you need more you can do to upgrade. It is not the problem. Buy compatible module and place it on the inside.

  • Satellite A200 (PSAE6) cannot download BIOS update

    Hello! I have some kind of problem. I want to update my BIOS, but I can't download the dowload page!
    Maybe I can download it also?

    What cell phone do you have?

  • Satellite A200 PSAE6E: unknown devices after installing XP

    I have a Satellite A200 PSAE6E and it came with Vista.
    Now I downgraded to XP my self and installed all the drivers I could find on the toshiba site
    I still have these problems:

    1. I have a pci memory controller which is not identiyfied by windows and I want to solve that

    2. when I connect my video camera pit 4 pin firewire to my laptop not found and when I do it by USB ieee1394, I get the usb device not recognized (trieed download of drivers for the cam, but they do not work)

    Please help me :)

    thnx

    Hello

    Regarding the point * 1: *.
    The "PCI memory controller" or "Mass Storage Controller means the former Turbo Memory module Robson." This feature is only available on Vista, and that's why drivers are not available for Win XP.

    Check this box:
    [No driver Windows XP for PCI memory controller | http://aps2.toshiba-tro.de/kb0/TSB83023N0000R01.htm]

    (* 2) * I put t know how it works with your camera, but I need to first install the cam drivers then I connected the camera to the laptop with a FireWire / USB 2.0 and then I turned on the video camera.
    My A200 she recognized immediately.

  • Satellite A200 PSAE6E: Impossible to install the audio drivers after installing Win XP realtek

    Hello...

    Recently, I repartitioned my laptop HD to install XP and kubuntu (it came with vista)... However, I was not able to install audio drivers for its audio devices...

    The laptop is a toshiba Satellite A200-PSAE6E and everest indicates the following audio controllers:

    ATI hd 2xxx hdmi @ ati radeon hd 2600 - controller high definition audio
    Realtek alc268 @ intel 82801hbm ich8m - audio controller high definition

    First I tried to download the audio drivers high definition realtek web site (32-bit version of windows xp). I tried to run the installation, manually navigating to WDM file during the installation of the pilot and navigation manually the folders where the drivers have been copied during the installation under c:\windows\system32\... all to nothing done...

    Then I tried to download drivers toshiba official of the support web site of europe from toshiba for the realtek chip... I've lived the same behavior (both when you run the Setup program and install manually force pilots)

    Then I tried to download the drivers for ATI HDMI audio device from realtek website... with the same results...

    Windows tells me that it was impossible to find a driver in the any of the archives...

    The only thing that could be the culprit because as far as I can tell, is that I installed service pack 3 RC2...

    Any help would be greatly appreciated,
    Tasos

    P.S. I've tried the two automatic installation through specification of a folder and choose the options "I will manually choose a driver from the list" in the hardware installation wizard... the result is always the same... Note that the audio works perfectly under ubuntu...

    P.S.2 IMPORTANT! I recently discovered that toshiba offers bios versions for the A200 PSAE6E depending on if it is equipped with windows xp or vista...

    This refers to which the operating system has been installed when the system was purchased, or the operating system that is currently used? Can I upgrade the Bios of my laptop with the XP version or this break from things?

    Hello

    Regarding the sound issue.
    A lot of people already asked for it here on the forum and my knowledge the driver sound doesn't work because that some Member States the fixes and patches are missing.

    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

    You will need to install KB888111 and KB835221 hotfix

    With regard to the BIOS;
    Yes, some series of laptops needs a version of XP BIOS if you want to install and use the XP on the laptop. AFAIK the A200 is one of these series of laptops.

    Good bye

Maybe you are looking for

  • my time machine just to complete a backup, but it is not listed?

    I have three macs backed up on a time machine. The mac, I want to migrate was on the list, but I made a new backup to get the latest version. Now that it's over, it is not on the news on the time machine. No idea where it went? It drives me crazy.

  • How do you define a table of drop-down list to a specific value boxes?

    I have a table of drop-down list boxes that I want to put a specific value. When I say my program to put them to affect only the drop-down list box which just recently I changed and none of the others. I have attached a small vi presents the problem.

  • Develop my first application Berry... Help, please

    Hey guys, my client wants an app for his business, this will be my first development for BB, and I know there is resolutios of different screen for different devices of BB. What templates should I build the app for? I mean, what resolution should I u

  • Product sharing between PlayBook and Smartphones

    I have an application available for the devices of the PlayBook and BB7 (ball Gunner 3D), and I have a user complains that, although he bought and installed on their smartphone, it can also download the game for his PlayBook.  Apparently the applicat

  • Push registration failure

    Hi I'm new to the development of blackberry, I tried to load the example code http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800429/How_To _... It is on a BlackBerry but 911 failed to push the record. Can someon