Re: Satellite A210 - 1 4 - ATI CCC does not work on Vista

Similar Questions

• Satellite A210-ST0 - wireless LAN driver does not work

  I recently reformatted my laptop with windows XP, and I have all the drivers working except the wireless Lan driver.
  I got the driver from the toshiba page and this is the XP driver. I install it, but the computer still does not recognize that the map has a pilot (appears as a question mark in the Device Manager) does anyone else have this problem? is there another place to get the driver?

  PS: I'm pretty good with computers, I just need the driver file and can installed with on an EXE file

  Hmm

  What page of the driver Toshiba did you use for the download of the driver?

  As I m not wrong not the * Satellite A210 - ST0 PSAFGC * is a Canadian series and therefore, it would be desirable to use the Canadian page for the download of the driver!

  Check this box:
  http://support.Toshiba.ca/support/download/ln_byModel.asp

  The WLan card chip could come from Realtek or Atheros.

  Last but not least, you should check your BIOS version. If the latest version is available on the Canadian page and then try to update!

  Good luck

• Satellite A210-1AP: supervisor password utility does not work for Win 7

  I have the utility supervisor password v2.00.05 for Win 7, but it is not working on Win 7 I can't change my password!

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1871687& rpn = PSAFGU & modelFilter = A210-ST1616 & SelCategorie = 3 & selFamily = 1073768663

  I used this link.

  Model short is psaele
  Where I can find all the drivers and all the utility for Win 7.

  Your laptop is not model portable American and you must use drivers of European support page.
  For now, Toshiba has not begun support Win7, but I hope it will happen soon. The question is if your laptop model will be supported Win7.

  In any case, I think you can use touchpad driver designed for A300, but it takes that Toshiba offers all drivers.

• Satellite P100 - 400 (PSPA6E): display driver does not work with Vista 64 bit?

  Hello

  I have a P100-400 (PSPA6E) Satellite and I just got the new version of Windows Vista x64bits. I tried this version of Vista because this series of laptops in the 64-bit processors. Well, the problem was when I downloaded the drivers to display on the site and when I'am install the installer says I'm not a Windows vista OS.

  Well actually these drivers only work for Vista x32bits. And I had the same problem with the audio drivers. If Vista was running really slowly and noiselessly, perfect...

  What I am asking, that is, if you realize laptops with 64 bit, why aren't you drivers that work with 64 bit systems...

  Hello

  In fact 64-bit Toshiba drivers are not available at this time on the Toshiba page.
  I think 64-bit drivers are not available because Toshiba doesn't provide any laptops equipped with 64-bit operating system.

  But as far as I know that the new 64-bit drivers should appear both text.
  I'm also looking for these drivers because I m an owner of the 64-bit version of Vista.

  It seems that we have to wait but I m sure that the drivers will be available.

  concerning

• Satellite A300D-158 illumination button does not work on Vista

  Buttons light Toshiba does not work under Vista.

  I installed added package versions available in Toshiba support page, but Toshiba Assist do not see the list of function buttons where I can change the feature keys.

  When this value added package is uninstalled all buttons works with WMP, but during the installation - do not.
  Illumination power button is not working do not by the press.

  This means support to toshiba button does not work properly with vista.

  I don't have these problems with XP

  Hello

  As far as I know, you can enable and disable the lighting in the BIOS.
  Go to BIOS and check if you can activate it.

  By the way; you said that buttons don t work with Vista.
  Have you tested this with Vista OS preinstalled Toshiba?

  You should do this!

• Zoo Tycoon 2 does not work on Vista 64 bit Ultimate

  When I start the game it gives an error saying that I have 0 MB of RAM installed.
  I also have a stub GPF.

  I tried to turn on DEP for all programs and added ZT.exe in exceptional cases.
  I edit "MSCONFIG" to show only 2 GB of ram.

  The issue of ram 0 MB goes, but I still I get a stub of protection error when I start the game.

  The thing is my old Zoo Tycoon 1 full collection works very well.
  ZT1 was released around 2001-2002. Whereas ZT2 came out around 2006.
  How can and more old-fashioned work fine but not the new version. I expect it to be the other way around.

  Someone at the helpdesk said MS the ZT2 game does not work on Vista 64 bit and I should install a virtual machine so that it can work in 32-bit.
  Is really the only way? Help, please.

  Hi orbit17,
   
  Thanks for posting on Microsoft Answers.
   
  Try to turn on DEP for "Windows programs and services only" and then restart the computer and check with the game.

  Here is a link to a KB which deals with the minimum requirements of the system and the compatibility problems with Zoo Tycoon 2: http://support.microsoft.com/default.aspx/kb/889368

  Please make sure that your computer meets the requirements for the game and that your computer is compatible

  Also how much RAM do you have installed on the computer?
  Did you add extra RAM since the purchase of the computer?

  You can also try to run the memory diagnostic tool by using the Windows Vista DVD.

  I hope this helps.
  Kind regards

  Niranjan | Microsoft Answers Support Engineer

• My microphone does not work on vista?

  My microphone does not work on vista? WATS the problem

  Hi AhsanShah,

  1. What is the brand and model of your microphone?

  2. what happens when you try to use the microphone?

  3. you receive messages or error codes?

  4. were you able to use the microphone before without any problem?

  5. you will remember to make changes to the computer before this problem?

  6. are you facing problems with other audio devices?

  You can check out the following link and check:

  Connect one microphone, music player or other audio device to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Hope this information is useful.

• Windows Easy Transfer 7 does not work on Vista

  Try to migrate date files and the configuration of Vista Home Premium (32 bit) to Windows 7 Home Premium (64 bit), Windows 7 laptop says to use a new version of Easy Transfer, tried to install that but it does not work. Starts then just seems to close, without indication of the error.

  Hi boris99,

  You can see the following thread, which presents a similar problem discussed.

  Windows 7 easy transfer does not work on Vista Home Premium 32

• Built an MSI that does not work under Vista but works under XP

  We have built a MSI file that does not work under Vista but works under XP. No errors occur in the installation.  Running the installation "as Administrator".  But the application does not start without errors.

  You'd better choose to post your question in the developer forum. You can try the MSDN forums below, but you should definitely provide more details when you do.

  MSDN forums - http://social.msdn.microsoft.com/Forums/en-US/categories MS - MVP - Elephant Boy computers - don't panic!

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• Satellite Pro M30 Win 7 - webcam does not work on msn messenger

  Hi all

  I have a Satellite Pro M30 Modell Nr.: PSM35E and just changed to Windows 7. But put him Nvidia card NVIDIA GeForceTM FX Go5200 Grafik 64 MB of RAM is not working properly.

  I could find a Vista driver and installed, have Aero + photos on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.

  Can someone help me?

  Thanks for your help

  Hello

  I m a bit confused; you have some problems with the graphics card or with the webcam?

  I assume you mean on external webcam connected to the USB port? Right?
  What happens if you connect the webcam to the laptop? Can win 7 recognize the device? Have you installed additional drivers for this webcam?
  Most of the time it s necessary to do so because I think that it s not Plug & Play device.

• Satellite Pro R50 - brightness control F3 does not work

  Hello

  I have a R50 Pro Satellite - bought just 1 month ago.

  Suddenly the order of function F3 to control light intensity has stopped working.

  The brightness can down with F2 function but F3 does not work

  F3 in the software and the operating system back to research, but do not work by pulling the brightness setting.

  So I'm stuck with my brightness down as low as it goes.

  I downloaded the latest driver for the feature key and installed, so it isn't that.

  Anyone got any help they can give?

  See you soon
  Craig

  As a temporary solution, you can change the brightness in the power settings.
  I really don't understand what the problem may be, but try to reinstall the utility system then Toshiba and Toshiba driver to feature key.

• Satellite NB10T-A-101 - mouse pad does not work

  I have a touch screen for Toshiba Satellite NB10T-A-101, the touch screen works very well but I use mostly the mouse pad I find using the slider easier.

  But recently my guarded cursor freezing for a second or two and then to spend once again, but now the mouse pad seems not working with the left and right click buttons work but not the touchpad.

  I made sure the touchpad is enabled in the mouse settings, so I don't really know what to do now.
  Any suggestions would be greatly appreciated
  Thank you

  Hello

  Have Hmm you also checked the FN + F5 key combination?
  This would enable and disable the touchpad as well.

  But from my point of view, it would be possible that the touchpad module is malfunctioning.
  I m thinking about the hardware malfunction because the touchpad buttons work and just touch the touch work area module doesn't correctly.

  Usually, if the touchpad would be handicapped by any software, both; as well as the touch buttons does not work.

• Satellite A-L50-19N - audio DTS does not work after update of Windows 10

  It is the most important thing in the drivers of toshiba, because without this driver, the sound is terrible...

  And now after the upgrade to 1511 he doesn't...

  I reinstalled IDT AUDIO latest driver is for 8.1 (2015 jan) and DTS Audio, which is for WIndows 10, but it does not work, I can it enable / disable EQs change, but nothing will change...
  
  WINDOWS 10 (1511)
  TOSHIBA SATELLITE L-50-A-19N

  DTS: 6.10.6491.0
  IDT: 1.2.41.0
  

  I fixed that, I updated its IDT Manager devices, and now Audio DTS driver works...

• Satellite A500 and Win8 - DVD player does not work

  I upgraded my Satellite A500-17 X to Windows 8, but now my DVD drive does not work.

  Anyone know how I can get it working again.
  Thank you.
  Cumbria

  Solution here:
  http://www.CSD.Toshiba.com/cgi-bin/t...e&soID=3516888

  * Uninstall Toshiba programs: *.
  • TOSHIBA Recovery Media Creator
  • TOSHIBA Disc Creator
  Then restart your PC using the power--> reboot option in Windows 8.
  Your CD/DVD should be available now.
  To help uninstall these programs, follow the instructions below

  * To uninstall a program or application: *.
  1. on the home screen, type Control Panel
  2. select Programs--> uninstall a program
  3. find two programs listed above and uninstall these applications
  4. once the application programs are uninstalled, restart your computer using the power--> reboot option in Windows 8
  5. when the power to the computer on the CD/DVD drive should be available
  If the CD/DVD drive still does not appear, follow the instructions below to uninstall a device driver

  * To uninstall a device driver: *.
  1. on the home screen, type Device Manager
  2. Select Device Manager > CD-ROM/DVD-ROM drives > right click on the displayed device > select uninstall.
  3. once the driver uninstall, shut down your computer by using the method of restart. The driver will be installed automatically when the computer restarts.
  4. the CD/DVD drive should now be shown.