Re: Satellite A210 - 1 c 0 - no display and not dΘmarre HARD disk

Similar Questions

• Satellite A210 - 11 p - gos black screen and HARD drive does not

  Hello

  My Satellite A210 - 11 p suddenly goes to a black screen and the hard drive stops working. It is always under tension and if I want to restart I have to unplug the unit and remove the battery.

  I thought it was overheating and checked the time and they were really high in the 1980s. I took the fan and cleaned (very dusty) and the basic form of thermal paste. Temperatures plummeted now immediately but I still have the same problem, I updated the graphics driver and watched the temp on GPU (which is fine) but the problem is still happening. I used a number of programs to check for errors on the hard drive and no reported problems. I reloaded Windows 7 but still no joy.
  The problem seems to occur at any time and is not due to the execution of a given program, even just browsing with firefox

  Not too sure what to do and any advice would be welcome.

  Hey Buddy,

  > I reloaded Windows 7 but still no joy.
  Have you ever tried with Toshiba Recovery disk operating system?

  The Toshiba recovery disc there is an image of the settings from the factory with all the drivers and tools. If you install Windows on this disk, you factory back.

  That would mean if you have the same problem after the installation of recovery it s really bad hardware working because you have pretested settings of Toshiba. In this case an authorized service provider can help you make an accurate diagnosis what part is affected.

• Satellite A210 - 19(d) - Toshiba Disc Creator does not work after last update SP2

  Satellite A210 - 19(d), HomePremium Vista 32.
  Toshiba Disc Creator does not work after update to sp2. Error code is 32007C-26-00000001.

  He needs to click ok up to 17 times to eliminate the error window, but it is more.

  Everything was OK before sp2.

  Please take a look in this thread:
  https://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=60687

  It user pdun459 had the same error using the Toshiba Disc Creator and could solve this uninstall and installation of this new

• Satellite A210 - 17l BIos update to take care of advanced format HARD drive problem

  Hi all

  Really hoping someone can help me with this.

  My old HDD not was not so I cloned the entire disc before it failed. -Just in time, too.

  I ordered a new drive - it's a WD scorpio black - Advanced format.

  Unfortunately I can't get my picture on this new album.

  Also, I am unable to do a reinstall with the original restore also cd because it doesn't have service pack 1 and that means that it can't recognize the HD.

  In any case id prefer to be able to restore my image and not make a re-install when even if possible.

  So my question is this:

  Y at - it an update of the bios I can ask my another pc version 2.00 is available which will include options to change the options of ide drive - ahci?

  It's the only solution I can think of-bearing in mind I do not have an operating system installed, so the alignment tools are not an option as another fix. -Fast technology of storage Intel drivers do not work, because I have an AMD athlon processor.

  So is there any BIOS I can Flash my computer with to activate the options mentioned?

  I have a method to Flash the bios with a BONE, so this isn't a problem.

  Also other suggestions for workaround on this more than welcome.

  Thanks :))

  The_red_pill.

  Hello

  Update BIOS don t help you. To my knowledge, it does not add additional options such as a switch between AHCI and compatible mode.
  In addition, you can use ANY BIOS. You must use the BIOS that came out for the model of laptop. But as I said, this isn't a solution.

  In addition, the image of Toshiba already contains all the drivers in order to install the system. It s any SP1 isn t the image part.

  I guess you're talking about Vista OS, given that the laptop came with pre-installed Vista OS. http://www.Toshiba.co.UK/discontinued-products/Equium-A210-17I/

  I recommend you format the HARD drive first.
  Use a tool called Gparted. You can create a bootable USB key containing this tool.
  This allows to start Notepad in order to format the HARD drive.

  The installation of the system using the recovery disk

• Satellite M40 does not start from hard disk - read error

  "I push the button - briefly see the In Touch with tomorrow TOSHIBA screen - then ' + a disk read error occurred press Ctrl Alt Del to restart +".

  I control alt delete brings me briefly on the screen TOSHIBA where I can choose either F2 or F12.

  Do I need a startup disk and where can I get one in order to boot from the CD ROM?
  Do I try to get into the Satellite M40 product Recovery DVD-ROM - this concern for me as the hard drive will be reformatted and all data will be lost.

  I'm stuck please help!

  Hello!

  If you enter the product recovery disc, Windows will be relocated and will be erasing all data on the HARD drive.

  I think that your HARD drive is damaged. You can check this with the Drive Fitness Test. Here you can download:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.

  By the way: you can save the data on the HARD drive, when you put it in a box external HARD disk. Then you can save the data on another PC, if the HARD drive is ok and have no errors.

  Good bye

• Satellite A210-19Z - BIOS does not find my HARD disk

  My HARD drive crashed so I bought a new and now my BIOS can not find it, and when I try to install XP, it says that it cannot find any hard disk.
  What should do? The new HARD drive is a Samsung SATA 2.5 "artno:HM121HI...

  Please help me... I'm going crazy...

  Thank you!

  Hello

  The BIOS should recognize the new HARD disc without any installed SATA drivers!
  The SATA drivers are needed only for Windows OS!

  Please check the position of the jumper on the HARD drive. Usually, these riders are avaialbel for 3.5 HARD disk but some 2.5 drives hard also supports a rider where the master/slave/c-salt settings could be changed

  Welcome them

• Satellite A210 - 16G - problem of CPU frequency and memory

  Hey guys,.

  I had a problem with my laptop I can't solve, since I installed windows 7 RTM x 64 version.
  I noticed something is wrong after finding that my Windows experience index has fallen to 2.7 instead of 4.5, I used to have on Vista. For those who do not know my characteristics are:
  AMD Turion 64 X 2 TL-60, which I've got 2.7 of note, 4 GB Kingston DDR2-667 (333 MHz) - 4.4, scores of charts and hard drives are the same.

  I read in one of the forums that it may be a problem with the standby power options, but he did not get any option that says on the frequency of the processor changing according to the plan of the power. I also installed new version 2.0 of the website of Toshiba BIOS, but it only makes things worse: I've got 6.0 rating graphics of games but the Perf of Aero desktop is now 1.0!

  I installed diagnostic software: Everest and CPU - Z and I discovered that my CPU works with a frequency of 800 Mhz (the multiplier is 4 x, voltage 0.8V) and my DRAM frequency is 159.8 Mhz (I don't know if it's ok, but I know that 4.4 score is certainly too low although).

  So tell me guys, is this a problem of the operating system? Should I try to install the 32-bit version of Windows 7, or it won't change anything? Maybe I should try some software that would change the frequency of my FSB?
  I'm waiting for your answers, because I don't know what to do.

  Paul

  Aero needs a WDDM compatible graphics driver, then try to update the graphics driver on the Toshiba site

• Satellite Pro C660 - 21(d): question about the partitions on the HARD disk

  Hello

  I just started using my new satellite pro c660 - 21 d

  My office has drive c, d, u, s
  C either windows 7, Vista D
  The drive U is 342 meg in size

  I didn't have the disk in two 230 gig drive so thoughtless narrowed C drive of 70 GB and D drive with 10 gig (it's the primary recovery partition

  I have now two empty partitions of 170 Gig (from c drive)
  and 214 Gig (from d drive)
  But windows will only allow me to add one as a disc of the user
  He says may not have more than 4

  The reason for being there is a partition of Active recovery without letter.

  I can't unshrink drive C or drive D then I went with 170 GB of unused space.

  I guess that a solution would be to lose the data disk 10 gig that contains the recovery software but then I don't have a backup.

  Suggestions as to what I could do to work around this problem.

  I am now under the Create recovery disks (2 of them) so maybe I could remove one of the partitions after.

  I don't know why he answered instead of edition, but if the recovery disc creation complete with no errors, I can remove the hard drive?

• Satellite Pro A300 - 1 H 2 - Windows does not recognize the HARD drive

  Hello

  I'm a newbie, which has probably asked bin before so if You ' l excuse me, I have a satellite pro A300 - 1 h 2.

  I got the volume of unmountable boot blue screen, then tried to adapt to a new samsung drive. I put in my windows disc it will load all the drivers, then says that there is no hard drive?
  In the bios, it recognizes it?

  Thanks if anyone can help

  Hello

  The problem is that your laptop supports the SATA HDD controller but the system OS does not contain the SATA drivers
  You can assign in the compatible SATA mode BIOS.
  This allows you to install the operating system without installation of the SATA drivers.

  Welcome them

• Can not read the HARD disk capacity properly after the upgrade on my Satellite A135-S2276

  I have a Satellite A135-S2276 and I recently updated my 80 gig HDD with a 320 GB HARD drive and drive C shows only 72 GB of available not the 300 - ish that it should have. I did some research and it seems that it should be there, perhaps simply not visible? Update the BIOS?

  Any suggetions?

  Thank you!

  Hello

  I think that the A135-S2276 supports SATA HDD so I doubt that the issue of the LBA48bit could be the reason.

  I found the details here on the Toshiba page we:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1596141& rpn = PSAD6U & modelFilter = A135-S2276 & SelCategorie = 3 & selFamily = 1073768663

  In your case, I would recommend formatting the disk HARD whole again.
  In addition, you should check the size of the HARD drive in the BIOS.

  Generally, if the HARD drive has been recognised in the BIOS correctly then the OS should see all 320GB too.

• Satellite A500-18 t: is it possible to creat recovery external HARD disk drive

  Hello

  I just bought a Satellite A500-18 t and before the first launch, I wonder if it is possible to create the recovery disk on a USB external drive, rather than burning a DVD.

  No, something like this is not possible.
  Please create recovery DVDs and do not forget, that you will lose not.
  To create recovery discs, I recommend using the media high quality as TDK or Verbatim DVD-R.
  I had very good experiences with the media in the past.

• Satellite M30 slow start, running slow & on most of the time HARD disk activity led

  The question above with my laptop. It is used to run faster than my desktop, but has altered performance. Running XP SP2 and Norton Internet Security and Norton System Works. No error shows when executing the Tests of Norton. Have reformatted the hard drive and reinstalled software but little difference.

  Laptop takes @5 minutes to start. Open Outlook takes 10 seconds. Drive light is on most of the time so I was wondering if the hard drive related.

  Any ideas?
  Thank you very much.

  Try the freeware like HD Tune or HDD Health programs.
  These applications provide some information on the State of the HARD drive.

• Satellite P100-429, stopped after you create the partition on the HARD disk

  After you create the partition on the HARD disk. PC just stopped.
  After using the restore CD, nothing happened again, any ideas?

  Hello

  Express media player has been installed on the partition of the laptop?
  I can give you a good solution for 100%, but there may be a conflict between the express media player partition and the new partition.
  Have you installed the OS on the new partition?

  Hey Buddy, try to delete the entire partitions in the HARD drive and format the HARD drive completely. Then try to use it again the Toshiba Recovery CD and install Toshiba image on the HARD drive.

• Satellite L50 - A - 19 p - 0% battery and not charging

  Hello
  Since this morning, I have problems with my laptop battery.

  Even with the domain controller is connected, the suspension of the battery at 0% not charging and after a few seconds, Windows goes to sleep by itself.
  I tried to start Windows in safe mode and the battery seems to work without even plugged DC so at 0%.

  Now I use the laptop without the battery and only with DC power.

  Is there something I can do to solve the problem?

  Thank you!

  Try to uninstall the ACPI compatible control method battery.
  This can be found in the device-> battery Manager

  Once the compatible ACPI control method battery driver disappeared (uninstalled), click on the 'Action' menu at the top of the window and select Scan for hardware changes.

  This should reinstall the removed driver...

  But if it does not solve the problem of battery, keep off compatible ACPI control method battery.

• DVD Player displays only not the files on disk?

  My dvd player does not open the files on a data disc, he is coming as a blank disc, but if I try it on another computer the files are on the disc? I don't know why please can anyone help?

  I think you can try a number of things here.

  1. put to UPDATE the reader, 2 REINJSTALL the driver.

  Both involve the following steps: click the startup type in the search box Device Manager, I usually get to DEV and it hits the top of the list, click on anyway and it will open the window of permission, click on continue or enter the password and this will open Device Manager which will show all the devices on your computer. Now search for CD-ROM/DVD-ROM drives and click on the + sign next to it and a drop-down list will appear and if you RIGHT click a MENU will appear with the following choices, software update driver, disable, uninstall, look for changes on the material and properties.

  Now, here's the choice 1 click on update driver will open a window that says two things search your computer or line choose SEARCH ON LINE. If she comes back and says you have the latest version of the software, then choose option 2 click RIGHT on the disc again is it closed and choose uninstall. When you do this RESTART YOUR COMPUTER and the driver will be reinstalled as new when it restarts.

  Good luck

  RickS