Re: Satellite A300 - 0C 3 - devices USB cannot be identified.

Hello

Whenever my Satellite A300 wakes up fashion 'sleep', the USB devices such as external hard drive and the optical mouse cannot be identified unless I restart the computer. This sometimes happens to the LAN port as well, the internet has gone one time that the computer goes into mode 'sleep'. I tried to pull out them and reconnect it, the system gives me the sound of connected successfully but in my computer I can not find the external hard drive. It's really annoying.

Can someone help me please? Thank you very much!

I agree with Akuma. Try to update the BIOS and drivers from the chipset. On the Toshiba site, you can search for updates:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

You have installed the laptop with the drive Toshiba or Microsoft?

Tags: Toshiba

Similar Questions

  • Mass storage device USB cannot start. Why?

    When I attach a USB to my computer, it is detected, but the driver cannot be found. In drivers and the printer it says troubleshooting.

    It reinstalls the device drivers and shows the rest of the dialog box whenever I run the troubleshooter.
    [Window title]
    Installing the software driver
    [Main instruction]
    Device driver software was not successfully installed
    [Close] [Window title]
    Installing the software driver
    [Main instruction]
    Device driver software was not successfully installed
    [Close]
    Now, in the mass storage device properties, it shows the device status as "this device cannot start. (Code 10) »
    "Rental: Port_ #0002.Hub_ #0004" I also put driver, but it is up to date.
    Driver version: 6.1.7601.17577
    Driver date: 21/06/2006

    Hi Jessica,.

    The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

    I suggest you follow the steps in the link given below which will help you solve this problem.

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

    http://support.Microsoft.com/kb/943104

  • Satellite A300 - no Audio device installed

    Hey,.

    During the last week, I had trouble with my audio.
    The first incident occurred then that I was browsing the internet, and suddenly an error pops up and off my sound. When I checked for audio devices it says there where not installed and when I checked the Device Manager there is also none installed. I then uninstalled the driver/software from my computer and reinstalled them, but yet the drivers were not recognized. Instead, it there was only a HDMI output driver that would say that he plays sound, but none would come out of my speakers.

    Then I had abandoned all hope and played a video (no sound) when all of a sudden sound began to play off the speakers and all the audio drivers have been recognized.

    Then happened the same incident as the first, and now still can't solve this problem.

    Also mistakes keep coming by saying "Soundchanger.exe" does not work.
    Any help would be great! I uninstalled and reinstalled all the correct drivers and always use system restore, but the sound still doesn't work.

    Hello

    Has this happened with Windows Vista preinstalled Toshiba?
    If yes then I would recommend restoring the operating system using the Toshiba HDD image or the recovery disc.
    I think that it is necessary if the pilot of its installation or update didn't help.

    The new installation of the OS would also be useful to check if this is a hardware or a software only problem.
    Usually after the new installation of the OS, the sound should work fine. But if you this sound issue still appear then a hardware problem could be the reason for that, as mentioned by Akuma.

    I had some problems of sound, but only after the installation of XP_ _Win. Some MS patches that are part of the SP3 has been installed no. and therefore the sound n t function.
    So I deleted the audio driver, installed SP3 and after reboot the new, I installed SP3 and the sound worked again

  • Satellite Pro A300 can not find USB devices

    Hello forum,.

    We have a customer who bought a Toshiba Satellite Pro A300 with us, but he gets a strange mistake about it.
    It connects to a hub 5port Sandberg USB 2.0 to one of the usb ports, the pc detects the hub, but when it connects a /Memory stick to the hub, nothing happens.
    the hub and the memory stick works on other PCs.

    I hope someone can help.

    Best regards

    John Bork
    DANBIT A/S

    Hello

    What happens if you connect the memory stick directly without this USB hub?
    I also had a USB hub, but these hubs are a little complicated and delicate USB specification allows a certain power and according to the devices that connect, you need to use an active USB hub, that means with external power supply.

    But normally, Satellite Pro A300 should have enough USB ports if it of needed, I would recommend a USB hub with 2 or 3 maximum ports

  • Satellite A300 - USB ports stopped recognizing USB devices

    Hi Toshiba users.

    I have a Satellite A300 for 6 months and the USB ports sopped recognizing such as usb key usb devices, mouse... How can I fix this problem or what drivers to download?

    Thank you!

    Hello

    USB controller drivers are responsible for these functions. These drivers are part of the chipset drivers. Try to reinstall/upgrade to update chipset utility. You can get it from the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  • Cannot install audio device on Satellite A300-1 MB

    Hello

    I bought Toshiba Satellite A300-1 MB and I have the downgrade to XP.
    After I installed the drivers (including audio driver), now I get msg error on Device Manager.
    He tells me that I have something wrong with my audio, although I have audio.
    I also have an 'unknown device' in my device manager that I n know what I have to install to remove.

    Please,
    If anyone knows, I tried everything, I even reinstall windows Xp but nothing that he keeps asking me to install the audio device.

    Tal

    Hello

    You must search (google) for these unique MS patches (KB888111 & KB835221).
    Then you should install these patches before installing the Realtek audio driver!

    PS: the Realtek audio driver can be downloaded from the Realtek page too!
    You will find the most recent version. I remember that Realtek has released a new version last week

    Check it!

  • Satellite A300 PSAG4A: Webcam not detected in Device Manager

    I have a Toshiba Satellite A300 PSAG4A 02L00M with Vista Home Premium 64-bit.
    The webcam is not working and it is not detected in Device Manager.
    When I install the Chicony camera drivers, I get the "Webcam driver open fail. Error message.

    The fact that I can't see the Webcam in Device Manager tells me that there may be a hardware failure.
    However, I hope that this is a setting that I can fix myself.

    I had restored the laptop to factory also and I've updated the bios.
    I tried to uninstall all the USB controllers and reboot the PC.

    Is there something I can do?
    It's maybe a software problem?
    There may be a setting?

    Best way to test the operation of the equipment is to check with the factory settings installation operating system with the Toshiba recovery image. As I see that you have done this already.

    So if cam still doesn't work properly, I fear that there is a problem with the hardware.
    It cannot be matter of software because the recovery image contains the driver for the cam.

  • Satellite A300-M01 - fingerprint - cannot open the sensor with Win XP

    Hello

    I got a Satellite A300-M01 with Windows Vista but my my software is very slow, so I'm a Windows XP Installer to put in. After that, the fingerprint reader no longer works the registration of fingerprints he'll only say 'Cannot open the sensor' and if you access the service of this device it says "specified device instance handle does not match this device."

    I already downloaded the driver for this sensor of isd.toshiba.com.au, but after the installation, the problem is the same. Any info is much appreciated.

    Thank you.

    Ray

    Hello!

    Have you installed the tools and all the other drivers of Toshiba?

    Search on the Toshiba site for a BIOS update.
    Maybe this can solve the problem.

    Good bye

  • Satellite A300-19 q - how to start with an external USB drive

    Hi all!

    I have a (old) TOSHIBA Satellite A300-19 q bought in 2008. I wanted to do a clean install of Windows 7 by reformatting my HD. The problem is that my internal DVD drive no longer works. So I tried to boot from the Windows 7 DVD installation with an external USB drive.
    Unfortunately, I couldn't find a way to boot from USB devices in my BIOS options.
    My BIOS is up to date (version 4.20) from Toshiba Web site.

    So I was wondering, does anyone know if the A300-19 q can boot from USB devices?

    Thank you in advance.

    I have A300 at home but I never tried to start with an external USB device.
    Start your laptop and press F12 to get into the boot menu. There must be USB option. What happen when you try to use it?

  • Satellite A300 - cannot locate any wireless network

    Hi all

    I just bougth today a Satellite A300, everything works fine except the wireless access. Ethernet access works very well, and the problem is not with my wireless device since it works with my old laptop.

    It cannot locate any wireless network. It does not appear to be activated WLAN and I don't know how to enable it in the BIOS.

    The swicht wireles on the front of the laptop is turned ON, but not the function Fn + F8 appearing at all.

    Can anyone help please?

    What you mean with this WLAN is in the BIOS not enabled? Normally, you can change all BIOS options then try to activate it.
    Also make sure that the WLAN switch is on and active with FN + F8.

    Visit the Toshiba for a driver and the update to the BIOS:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • Satellite A300 - USB port and fingerprints issue

    Hello

    I'm starting this thread that I have problems with my fingerprint reader and my USB port.

    I have a Toshiba Satellite A300-C01 laoptop. It was purchased in September of last year. I have not used it much except for the first week I had it, I've been away (Overseas), and I didn't take my laptop with me (I took a former I). There is no chance that the laptop has been used so that I was absent because I live alone and that the cell phone was simply sitting in the computer room.

    I started using it again about 3 weeks. Around a week ago, I noticed a pop-up (bottom left of the screen) telling me that a USB port had problems. I put my FlashDrive on the first USB port and at first, it was not recognized. I tried with another flash drive I have and who has been recognized. However, every time I start the computer I get who pop up telling me that there is a problem with the USB port.

    I also met a problem with the fingerprint reader. A pop up appears in the lower left side of the screen and say that the fingerprint reader was having problems. Happened since then that the problem with my USB port began to appear. About an hour ago, I checked the Device Manager and the fingerprints fingerprints/biometrics scanner does not appear in Device Manager.

    Has anyone else had this type of problem?

    What did you do to solve it?

    I would appreciate comments that I have no other choice at this time until Monday when the Toshiba support is available (they are available Monday to Friday).

    Thanks in advance,

    Deanne.

    First of all, you should try to update the chipset drivers and software of fingerprint. The two you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    If it doesn't work you should try to update the BIOS. Check the Toshiba site for an update.

    In the worst case, you must reinstall the laptop with the Toshiba recovery disc. So you can make sure if it s a hardware issue or not.

  • Satellite A300-1MH - cannot start the eSATA external HARD disk drive

    When I connect eSATA disk HARD Satellite A300 is locked and the HARD drive is not detected. I tried to connect the HARD drive with both eSATA - SATA + USB power cable Cable when it is powered OFF with the same locked A300 result.
    Reloading utility chipset change anything.

    PS. on another computer same portable HARD drive works fine in both previous cases
    Thanks for the attention
    Fabio

    AFAIK, the chipset drivers are responsible for the usb, esata functions but you already reinstalled it. Have you tried to remove the chipset drivers in Device Manager and reinstall again? If still does not solve your problem, it may be the operating system itself. Using the preinstalled operating system or Windows disk?

  • Satellite M50D - Has - 10 K dosen't boot device USB WEIRD

    Hello

    I'm new here in the Forum and I have a problem with my Toshiba laptop.

    I want to do a complete backup of the drive HARD internal of my Satellite M50D - A - 10 K.

    I want to boot the laptop with my SE-208DB Samsun DVD USB drive with Acronis true Image 2011, but dosen't boot laptop, the USB device.

    I also install the bios acutualy (1.30), but it does not boot from the DVD drive.

    Pleas could someone help my.

    Thank you very much.
    KFSA

    It's strange. This is: If your USB device is not recognized by the BIOS or there is a problem with a CD/DVD media you are trying to use?

    I installed Win7 on my U940 satellite using pairs and IMPAIRES USB original Microsoft installation disc.
    Have you tested with different disks bootable?

  • Satellite A300 and Vista 64-bit - unknown and non-functional devices

    I have the Satellite A300-1Gn
    Here are some features:

    Technology
    type: technology Intel® Centrino® 2 processor with processor Intel® Core 2 Duo P8400, clock speed of the Intel® PM45 Express and Intel® WiFi Link 5100 chipset: 2.26 GHzFront Side Bus: 1066 MHz2nd level cache: 3 MB

    Operating system
    GenuineWindows Vista® Home Premium 32 - bit Edition (pre-installed, Toshiba-HDD recovery)



    System memory
    standard: 3 072 (2 048 + 1 024) MB
    maximum extension: 8 192 MBtechnology: DDR2 RAM (800 MHz)

    Hard drive
    capacity: 320 GB
    Certification: S.M.A.R.T. disc rotation: 5 400 rpm

    DVD Super Multi (Double Layer) drive
    Compatibility: CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD + R, DVD + R (DL), a DVD-R (DL), DVD - RW, DVD + RW, DVD-RAM
    Maximum speed: read: 24 x CD-ROM, 8 x DVD-ROM / write: 24 x CD - R, 4 x
    CD - RW, 10 x CD - RW, 16 x CD - RW, DVD-R 8 x, 6 x DVD-R (Double Layer), the HS
    6 x DVD - RW, 8 x DVD + R, DVD + R 6 x (dual layer), 8 x 5 x DVD-RAM, DVD + RW
    type: DVD Super Multi (Double Layer) drive

    Display
    "size: 15.4"
    type: Toshiba TruBrite® WXGA + TFT high brightness display resolution internal: 1 400 x 900

    Graphic adapter
    Manufacturer: ATI
    type: ATI Mobility Radeon™ HD 3650 supporting HyperMemory™ technology memory amount: 512 MB dedicated VRAM (up to a total of 2 302 MB available)
    graphics memory using HyperMemory™ with 4 GB of system memory technology)
    memory type: GDDR2 video (500 MHz) bus RAM (resp. RAM video and system memory combined) connected: 16 x PCI Express...

    I installed windows vista 64-bit to try it, and I started to download all the drivers I could find from Toshiba site... But I still have in my device under 'other devices' management 3xbase system of the device (who report that they do not work) and an unknown device "it works ok same woithout this, but my HD movies are restless...
    Is it posible to thath I missed something... Bluetooth, wireless, sound, games, camera, mic, etc., everything works...

    Thanks in advance guys (or girls);...

    Hello

    Have you installed the right graphics card driver?
    The Sat A300-1GN belongs to the PSAGCE series.
    I checked the page of the Toshiba driver and there are two pilots;
    I think that you should choose the ATI driver 8.477 display because this driver supports the Mobility Radeon HD 34xx/36xx chips.

    Other base system devices could be Bridge Media slot (for SD cards), touchpad, HDMI Control Manager.

    I didn't find these drivers 64-bit on Toshiba page. Maybe you should choose some drivers for Vista 32 bit

  • Cannot use the webcam on my Satellite A300

    Hello

    I installed Windows 7 Home premium in my laptop (windows Vista there) and since I can't use my webcam.

    It does not appear in Device Manager and I have install and uninstall the drivers of many times but whenever I see the message that says that the camera is either disconnected or destroyed and restart the computer or the camera.

    Is there a way to fix this?
    Thanks in advance...

    My laptop is Satellite A300-20W with PSAGCE-09N00DGE model number and the serial number 29353297Q

    I have the Satellite A300 too with two hard drives inside. Second I ve installed Win7 32 bit and the webcam works perfectly so I m just really wondering what the problem may be.

    You are 100% sure that the webcam works properly with the original Vista recovery image?

Maybe you are looking for

  • Problems with Microsoft-tool to terminate malware

    Whenever I have download this tool from the microsoft update service I have problems with my laptop L10-104. The system stops after that one every time changing the period and the display resembles a church window. After that I deleted this tool, the

  • Wire

    What kind of wire do I need to connect my deckjet 1050a on my mac?

  • Unable to play warhammer mark of chaos

    I just installed the game: warhammer mark of chaos. I got it a while ago, where it worked fine but I uninstalled because I played again. I installed today without any problems, but when I try to play and press open, nothing happens Programmer Kompati

  • My msn has been blocked for 2 days

    I always use my hotmail account, but it says its been blocked, Ive changed the password, and sent an email, also done everything ive been told to do but its wont even open, im also having problems connecting to my live account which I don't usually u

  • unloading of feature to make dhcp off the WLC and put it on Active Directory.

    I need to use the feature of unloading to dhcp off the WLC and put it on Active Directory.  Someone at - it a walkthrough or a page for this?  I know it's just a checkbox and a redirect to the new dhcp server, but where the hell is the configuration